I got mad at some ugly code today in LAVA's master.py, while cleaning it
up, I noticed an awkward line of code in our _update_uInitrd_partitions
function:
session.run(
'sed -i "/\/dev\/block\/mmcblk0p%s/d" %s'
% (cache_part_org, rc_filename), failok=True)
This seems like its just junk and can be removed. Before I start testing
the removal of it, I thought I'd check and see if anyone can say why I
shouldn't?
-andy
*Hi,*
*12.12 r2 Test Summary. Here is test result summary for Linaro Android
jelly-bean 4.2.1 builds platform on following boards:*
*Linaro-android jellybean 4.2.1 *
*1. ST-Ericsson Snowball.*
1.
*Samsung Origen.*
2.
*ARM Vexpress-A9*
3.
*Pandaboard 4430 and pandaboard 4460 *
*Synopsis:* In our 12.12 r1 Android jellybean 4.2 weekly release critical
test images some changes is observed as follows:
ST Ericsson Snowball android jellybean 4.2.1 builds normally audio,
youtube, playback of video, wifi, bluetooth, usb-camera, gallery, calender,
people, email, speach recorder is not working. Device-Tree is not found.
Phone-app is missing, download-install apk is never finish, 0xbench is
failed.
Samsung Origen Android jelly-bean 4.2.1 builds sd card mmount fail,
0xBenchmark test fail, ethernet *eth0* is missing on ECM, youtube, audio,
wifi, bluetooth, usb-camera test failed. Device-tree is not present,
calender and people cant sync, email cant sync.
Vexpress A9 android jelly-bean 4.2.1 build some new bugs is found with the
builds sd-mmc partition is unavilable, Suspend-Resumework from this builds,
Missing GL ES 2.0 drivers unable to run GLMARK2 benchmark, adb-dwm is not
working, thethering feature is not avilable, video-playback is failed.
Pandaboard 4460 and 4430 system crash at board bootup,
1. *Snowball Android JellyBean 4.2(column S)*
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadEF1N…
Features: audio, youtube, playback of video, wifi, bluetooth, usb-camera,
gallery, calender, people, email, speach recorder is not working.
Device-Tree is not found. Phone-app is missing.
*Note: kernel version is 3.4.0+ , toolchain version gcc version Linaro GCC
4.7-2012.11-1~dev, and Android version : 4.2.1*
*2. Samsung Origen Android Jelly Bean 4.2(column N)*
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDRDV…
Features: sd card mmount fail, 0xBenchmark test fail, ethernet *eth0* is
missing on ECM(config eth0 from command line), youtube, audio, wifi,
bluetooth, usb-camera test failed, angry-bird app not working, vid playback
and play music is failed. Device-tree is not present, calender and people
cant sync, email cant sync.Please refer to the spreadsheet and bug report
for more details.
Note: kernel version is 3.7.0-rc6-g0974d1e, toolchain is changed to
4.7-2012.11-1~dev, android version is 4.2.1.
*3. v-express A9(column S)*
*
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd…
*<https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd…>
Features: suspend-resume is working for this builds. sd-mmc partition is
unavilable, Suspend-Resume doesn't work, Missing GL ES 2.0 drivers, adb-dwm
is not working, angrybird is working properly, usb-cam apps is missing with
the builds, thethering feature is unavilable, video-playback is failed,
Audio is working with this image, content of sd-card is not shown from
gallery. Please ref to the spread-sheet for details.
*Note: suspend-resume is working for the builds. kernel version is
3.7.0-rc6-00620-g8890900, android version: 4.1.2.*
*4.Pandaboard 4430 and 4460(column-v )*
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd…
Features: system crash after board bootup. *kernel-Panic* and serial
dies, for this 4.2.1 builds. Please refer to the spread-sheet and bug
report( https://bugs.launchpad.net/linaro-android/+bug/1089837) and
attach bootlog details.
1.
*Thanks & Regards*
Soumya Basak <soumya.basak*(a)linaro.org* <amit.khare(a)linaro.org>>
QA Services - Linaro Platform
*http://wiki.linaro.org/Platform/QA* <http://wiki.linaro.org/Platform/QA>
hi,all
I using am3359 (TI) with usb camera ,and the android version is 4.0.3,but now I am facing one promble:
when I open camera I can't see the image,and display "camera is not responing"on the screen.
attach is my logcat.
my usb camera only support yuv422
is it is usb camera yuv data promble?
thanks for your reply.
zhangzhangwei
2012-12-07
On 10 December 2012 14:00, Vishal Bhoj <vishal.bhoj(a)linaro.org> wrote:
> Hi,
>
> The perf support for android is broken in the linux-linaro tracking tree.
> Bero is working on the fix. If we can't get it fixed, we may disable perf
> support on vexpress.
> The issue is being tracked here:
> https://bugs.launchpad.net/linaro-android/+bug/1088375
>
>
>
>
> On 10 December 2012 13:58, Fathi Boudra <fathi.boudra(a)linaro.org> wrote:
>
>> + linaro-android ml
>>
>> On 10 December 2012 08:44, Botao Sun <botao.sun(a)linaro.org> wrote:
>> > Hi,
>> >
>> > I noticed that since last Wednesday (5 December 2012), all vexpress A9
>> Jelly
>> > Bean build either FAILURE or NOT_BUILT. The latest successful build is
>> 121:
>> >
>> >
>> https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-a…
>> >
>> > Last week, we picked build 117 as our weekly test target:
>> >
>> >
>> https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-a…
>> >
>> > So there are only 4 builds between them. It seems not necessary to test
>> > build 121 until a newer build is available.
>> >
>> > Any idea?
>> >
>> > @Soumya, Would you check with Android team about this vexpress A9 Jelly
>> Bean
>> > build status? It should also be shown in Android daily test dashboard
>> if the
>> > compiling failed. If so, did you raise a bug for this issue?
>> >
>> > Thanks you.
>> >
>> > Best Regards
>> > Botao Sun
>>
>> _______________________________________________
>> linaro-release mailing list
>> linaro-release(a)lists.linaro.org
>> http://lists.linaro.org/mailman/listinfo/linaro-release
>>
>
>
---------- Forwarded message ----------
From: Botao Sun <botao.sun(a)linaro.org>
Date: 10 December 2012 08:44
Subject: vexpress A9 Jelly Bean build is not up to date as expected.
To: linaro-release <linaro-release(a)lists.linaro.org>, Soumya Basak
<soumya.basak(a)linaro.org>
Hi,
I noticed that since last Wednesday (5 December 2012), all vexpress A9
Jelly Bean build either FAILURE or NOT_BUILT. The latest successful
build is 121:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-a…
Last week, we picked build 117 as our weekly test target:
https://android-build.linaro.org/builds/~linaro-android/vexpress-jb-gcc47-a…
So there are only 4 builds between them. It seems not necessary to
test build 121 until a newer build is available.
Any idea?
@Soumya, Would you check with Android team about this vexpress A9
Jelly Bean build status? It should also be shown in Android daily test
dashboard if the compiling failed. If so, did you raise a bug for this
issue?
Thanks you.
Best Regards
Botao Sun
_______________________________________________
linaro-release mailing list
linaro-release(a)lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-release
--
Fathi Boudra
Linaro Release Manager | LAVA Project Manager
Linaro.org | Open source software for ARM SoCs
Hello Linaro:
I want to download the source of Linaro 12.10 Android for PandaBoard, however, when I was executing the "Repo sync", an error that a revision of git project "platforms\tools\pm-qa" was not found and the repo can not continue, I modify the manifest file to delete the project manually and the repo continues.
However, I encounter another similar issue "platforms\compiler\mclinker" not found. I am wondering whether you can provide me the solution to it. Just download the latest git project or just delete these projects or something else. I am looking forward to your reply
致
礼！
nie.lei
pebble.nie(a)gmail.com
2012-12-07
Hello all,
Is there a way of mirroring the Linaro Android repos locally?
For AOSP it can be done by using the special mirror manifest:
repo init -u https://android.googlesource.com/mirror/manifest --mirror
But there doesn't seem to be such a manifest for Linaro.
A special manifest is needed so that all the gits get downloaded to the
mirror and not just the ones used by a specific Linaro branch.
For the moment I'm using a custom script to create a mirror manifest from a
set of branches but it would be nicer to have it available directly.
Thanks,
Martin
*Hi,*
*12.12 r1 Test Summary. Here is test result summary for Linaro Android
jelly-bean 4.2 builds platform on following boards:*
*Android jb Release*
*1. ST-Ericsson Snowball.*
1.
*Samsung Origen.*
2.
*ARM Vexpress-A9*
*Synopsis:* In our 12.12 r1 Android jellybean 4.2 weekly release critical
test images some new bugs is observed
summary report as under.
-
ST Ericsson Snowball android jellybean 4.2 builds normally audio,
youtube, playback of video, wifi, bluetooth, usb-camera, gallery, calender,
people, email, speach recorder is not working. Device-Tree is not found.
Phone-app is missing.
-
Samsung Origen Android jelly-bean 4.2 builds sd card mmount fail,
0xBenchmark test fail, ethernet *eth0* is missing on ECM, youtube, audio,
wifi, bluetooth, usb-camera test failed. Device-tree is not present,
calender and people cant sync, email cant sync.
-
Vexpress A9 android jelly-bean 4.2 build some new bugs is found with the
builds sd-mmc partition is unavilable, Suspend-Resume doesn't work, Missing
GL ES 2.0 drivers, adb-dwm is not working, angrybird is working properly,
usb-cam apps is missing with the builds, thethering feature is unavilable,
video-playback is failed.
1. *Snowball Android JellyBean 4.2** **(column R)*
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadEF1N…
Features: audio, youtube, playback of video, wifi, bluetooth, usb-camera,
gallery, calender, people, email, speach recorder is not working.
Device-Tree is not found. Phone-app is missing.
*Note: kernel version is 3.4.0+ , toolchain version is gcc version 4.7.3
20121001 (prerelease) (Linaro GCC 4.7-2012.10) ), and Android version : 4.2*
3. *Samsung* *Origen Android Jelly Bean 4.2** **(column M)*
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDRDV…
Features: sd card mmount fail, 0xBenchmark test fail, ethernet *eth0* is
missing on ECM, youtube, audio, wifi, bluetooth, usb-camera test failed,
angry-bird app not working.
Device-tree is not present, calender and people cant sync, email cant sync.
*Note: the kernel version is upgrade to 3.7.0-rc6-g0974d1e, android version
is 4.2*
1.
*V-express A9(column R)*
*
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd…
*
Features: sd-mmc partition is unavilable, Suspend-Resume doesn't work,
Missing GL ES 2.0 drivers, adb-dwm is not working, angrybird is working
properly, usb-cam apps is missing with the builds, thethering feature is
unavilable, video-playback is failed, Audio is working with this image.
*Note: kernel version is same as 3.7.0-rc6-00620-g8890900, android version:
4.1.2.*
*Thanks & Regards*
Soumya Basak <soumya.basak*(a)linaro.org <amit.khare(a)linaro.org>*>
QA Services - Linaro Platform
*http://wiki.linaro.org/Platform/QA*
Hello,
(please keep me in Cc: on replies as I'm not subscribed to
linaro-android)
I'm working on adding Galaxy Nexus support to LAVA using fastboot. This
is work in progress, but I can already get a full boot test to run on
the Nexus. :-)
I have one question for you.
I noticed that the builds for all other devices are made with tarballs,
and the LAVA jobs for them are also invoked passing tarballs.
The Galaxy Nexus builds, on the other hand, are released as .img files.
May I assume that the LAVA jobs you guys will be submitting for the
Galaxy Nexus will also use .img files (so that I don't need to handle
file format conversion etc), or is it useful for you to submitt tarballs
and have them converted into .img by LAVA? If so, please give me a
pointer with instructions on how to create those .img files.
Best regards,
--
Antonio Terceiro
Software Engineer - Linaro
http://www.linaro.org
