Hi,
The test result summary of Linaro-android 13.04 Release (Calender Week 17;
2013) on the following boards:
[1] TI-panda 4430;
[2] TI-panda 4460;
[3] ST-Snowball;
[4] Samsung origen 4412 quad;
[5] ARM Vexpress A9;
synopsis: video playback works fine on origen 4412 quad, audio out over
HDMI works well on origen 4412 quad.
[1] TI-panda 4430 with Linaro android jellybean (Column: AH)
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd…
toolchain version is (gcc version 4.7.3 20130328, boots ok, serial ok,
audio on board ok, video-playback ok, audio over hdmi not work, DS-5 works
fine, ethernet and wifi works well, adb-usb ok,
[2] TI-panda 4460 with Linaro android jellybean (Column: AH)
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd…
all feature remain same as previous week build test, adb-usb ok, ethernet
ok, DS-5 works fine, youtube, and video-playback ok, audio on board ok.
[3] ST-Snowball with Linaro android jellybean (Column: AG)
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadEF1N…
kernel version is 3.4.0+ , toolchain_version is : (gcc version 4.7.3
20130328 (prerelease), boots ok, serial ok, adb-usb ok, ethernet ok,sd-card
partition is mounted, youtube and video playback not working (known
issue).
[4] Samsung origen 4412 quad with Linaro android jellybean (Column: G)
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadDRDV…
kernel version 3.8.0-g0816984, toolchain_version: gcc version 4.7.3
20130328, adb-ethernet ok, adb-usb not ok (known issue), browser ok,
video-playback, youtube ok, video-playback works on HDMI is fine, Audio
works on hdmi with video,
[5] ARM Vexpress A9 with Linaro android jellybean (Column: AG)
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd…
kernel version is 3.9.0-rc7-00198-g03d27d8, toolchain version 4.7-2013.04,
boots ok, serial ok, sd-mmc is ok, ethernet ok, youtube video playback
fails (known issue), adb-usb not working (known issue).
Thank You.
with Best Regards
Soumya Basak.
Hi,
here is the test result summary for linaro-android jellybean week 16 on
different platform
[1] TI panda 4430
[2] Ti panda 4460
synopsis: it keeps exactly same result from the last week test, no major
issue and changes observed in this week.
[1] Ti panda 4430 with Linaro android jellybean (column: AG)
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd…
toolchain version is upgraded to (gcc version 4.7.3 20130328 (prerelease)
(Linaro GCC 4.7-2013.04),glmark2 finished with issue, adb-usb, ethernet
working fine, youtube and video-playback working fine. please see into the
result spreadsheet for details test result and bug report.
[2] Ti panda 4460 with Linaro-android jellybean (column: AG)
https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd…
toolchain version is upgraded to (gcc version 4.7.3 20130328 (prerelease)
(Linaro GCC 4.7-2013.04), glmark2 finished with issue, adb-usb, ethernet,
video-playback working fine. Please look into the result spreadsheet for
details test result and bug report.
With best regards
Soumya Basak.
Dear lInaro support,
I am Bruce from China.
I am trying to build image for panadaboard. I got linaro-android 13.03 release(I got build script from this link: https://releases.linaro.org/13.03/android/panda/).
I meet some problems:
1. my source code download speed is very slow. It is <8k/s. How can I speed up this?
2. When I try to build this release with linaro_android_build_cmds.sh, and when build to ~/android/kernel/linaro/pandaboard/tools/perf, error is reported. message is like "Makefile 438: No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static".
I checked this makefile, and it is caused by libelf and bionic is not find. I checked many linaro toolchain, but I can not find libelf for target build. In fact my host toolchain should have installed this libelf. How can I pass this build?
Thank you.
/BR
Bruce
Hi There,
I have a question. Does the linaro source include all the required drivers?
I'm currently trying to build 13.02 for a Pandaboard ES, but it get's stuck
at the boot screen. The kernel is starting, but the infamous "init:
untracked pid 1507 exited" message is showing up at the serial log.
When scrolling up a bit, my serial log shows the following message:
[ 3.250732] PVR_K:(Error): EnableSGXClocks: Unable to scale SGX
frequency (-11) [172, /home/guido/linaro02/android/kernel/drivers/g
pu/pvr/omap4/sysutils_linux.c]
[ 3.266113] omap_sr_disable: omap_sr struct for sr_core not found
[ 3.272583] PVR_K:(Error): EnableSGXClocks: Unable to scale SGX
frequency (-11) [172, /home/guido/linaro02/android/kernel/drivers/g
pu/pvr/omap4/sysutils_linux.c]
Scrolling even further up, there is also something I don''t realy
understand:
[ 0.297973] ------------[ cut here ]------------
[ 0.298004] WARNING: at
/home/guido/linaro02/android/kernel/arch/arm/mach-omap2/omap_hwmod.c:1509
_enable+0x234/0x264()
[ 0.298004] Modules linked in:
[ 0.298065] [<c0019e10>] (unwind_backtrace+0x0/0xf8) from [<c0044b18>]
(warn_slowpath_common+0x4c/0x64)
[ 0.298065] [<c0044b18>] (warn_slowpath_common+0x4c/0x64) from
[<c0044b4c>] (warn_slowpath_null+0x1c/0x24)
[ 0.298095] [<c0044b4c>] (warn_slowpath_null+0x1c/0x24) from
[<c0022908>] (_enable+0x234/0x264)
[ 0.298126] [<c0022908>] (_enable+0x234/0x264) from [<c0022d2c>]
(_setup+0xa0/0x170)
[ 0.298126] [<c0022d2c>] (_setup+0xa0/0x170) from [<c0022f90>]
(omap_hwmod_for_each+0x30/0x5c)
[ 0.298156] [<c0022f90>] (omap_hwmod_for_each+0x30/0x5c) from
[<c089cd34>] (omap_hwmod_setup_all+0x6c/0x98)
[ 0.298187] [<c089cd34>] (omap_hwmod_setup_all+0x6c/0x98) from
[<c000864c>] (do_one_initcall+0x110/0x178)
[ 0.298217] [<c000864c>] (do_one_initcall+0x110/0x178) from [<c0893854>]
(kernel_init+0x8c/0x12c)
[ 0.298217] [<c0893854>] (kernel_init+0x8c/0x12c) from [<c001433c>]
(kernel_thread_exit+0x0/0x8)
[ 0.298278] ---[ end trace 1b75b31a2719ed1c ]---
[ 0.298278] omap_hwmod: mcpdm: cannot be enabled (3)
what is the login-id ？ how can i get one ？
when i $ repo sync , i got this message below :
From http://android.git.linaro.org/git-ro/platform/system/media
* [new branch] tools_r22 -> aosp/tools_r22
The authenticity of host 'linaro-private.git.linaro.org (91.189.95.50)'
can't be established.
RSA key fingerprint is 62:1e:b1:73:39:f3:9d:eb:81:87:b8:f8:f7:a8:79:97.
Are you sure you want to continue connecting (yes/no)? yes
