Linaro-android

linaro-android@lists.linaro.org

1072 discussions

by R.Zhou

Hello everyone: I am new for this part. Today I tried to build Android to Pandaboard (Linaro 12.04). When I did the last step ¨Get Binaries¨, the text can be seen below. I do not know why. Could you give some advices? Best regards Ryan

11 years, 4 months

Linaro for Mako

by najmi.zabidi＠gmail.com

Hi, I am new to kernel compiling. I just compiled and boot my Nexus 4/Mako using Google Toolchain, and now I want to try Linaro. I look at the https://android-build.linaro.org/ page but can't find for Mako. Any tips? Thanks.

11 years, 5 months

Test Result Summary of Calendar Week 47, 2013, for Linaro Android Jellybean.

by Soumya Basak

Calendar Week 47 2013: Here is the test result summary for Linaro Android Jellybean image on following boards: 1) TI Panda 4430; 2) TI Panda 4460; 4) ARM Versatile Express A9; 5) Versatile Express LSK TC2; 1) TI Panda 4430 + Linaro Android Jellybean (Column: BJ) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… 2) TI Panda 4460 + Linaro Android Jellybean (Column: BJ) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… 3) ARM Versatile Express A9 + Linaro Android Jellybean (Column: BI) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… 4) Versatile Express LSK TC2 + Linaro Android Jellybean (Column: H) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… please refer to the test result spreadsheet. Thank You. Best Regards Soumya Basak.

11 years, 5 months

RE: Failure to boot with 13.10

by Eric Huang

Jon, I think I have solved issue. I replaced the motherboard USBMS contents with files from V5.0 VE DVD, and issue went away. Thanks Eric H ________________________________ From: Eric Huang Sent: Wednesday, November 20, 2013 1:05 PM To: 'Jon Medhurst (Tixy)'; linaro-android(a)lists.linaro.org Subject: Failure to boot with 13.10 Jon, I tried to update my Vexpress TC2 to 13.10, but bootup seems to stuck at "Running boot script from flash BOOTSCRIPT". This is the first time I tried to switch to use UEFI with zImage. I updated the firmware of my VExpress following the steps listed in the release note. Any idea what I did wrong? Cmd> Powering up system... Daughterboard fitted to site 1. Switching on ATXPSU... ATX3V3: ON VIOset: 1.8V MBtemp: 37 degC Configuring motherboard (rev D, var A)... IOFPGA config: PASSED MUXFPGA config: PASSED OSC CLK config: PASSED Programming image \SOFTWARE\TC2\zimage.bin Erasing Flash . Writing Flash Updating eeprom with image zimage Image: zimage UPDATED from \SOFTWARE\TC2\zimage.bin Programming image \SOFTWARE\TC2\dtb.bin Erasing Flash . Writing Flash Updating eeprom with image dtb Image: dtb UPDATED from \SOFTWARE\TC2\dtb.bin Programming image \SOFTWARE\TC2\initrd.bin Erasing Flash . Writing Flash Updating eeprom with image initrd Image: initrd UPDATED from \SOFTWARE\TC2\initrd.bin Testing SMC devices (FPGA build 16)... SRAM 32MB test: PASSED VRAM 8MB test: PASSED LAN9118 test: PASSED USB & OTG test: PASSED KMI1/KMI2 test: PASSED MMC & SD test: PASSED DVI image test: PASSED AACI AC97 test: PASSED CF card test: PASSED UART port test: PASSED MAC addrs test: PASSED Reading Site 1 Board File \SITE1\HBI0249A\board.txt DB1 JTAG configuration complete. Setting DB1 OSCCLKS... DB1.0 DCC 0 SPI configuration complete. Writing SCC 0x40610007 with 0xFF00FF00 Writing SCC 0x40610046 with 0x01CD1011 Writing SCC 0x406101C0 with 0x1032F003 Writing SCC 0x40610100 with 0x33330C00 Writing SCC 0x40610048 with 0x022F1010 Writing SCC 0x40610049 with 0x0011710D Writing SCC 0x4061004A with 0x022F1010 Writing SCC 0x4061004B with 0x0011710D Writing SCC 0x4061004C with 0x022F1010 Writing SCC 0x4061004D with 0x0011710D Writing SCC 0x4061004E with 0x022F1010 Writing SCC 0x4061004F with 0x0011710D Writing SCC 0x40610300 with 0x00000005 Writing SCC 0x40610301 with 0x060E0356 Writing SCC 0x40610302 with 0x00000000 Writing SCC 0x40610303 with 0x00000000 Writing SCC 0x40610304 with 0x384061A8 Writing SCC 0x40610305 with 0x38407530 Writing SCC 0x40610306 with 0x384088B8 Writing SCC 0x40610307 with 0x38409C40 Writing SCC 0x40610308 with 0x3840AFC8 Writing SCC 0x40610309 with 0x3840C350 Writing SCC 0x4061030A with 0x3CF0D6D8 Writing SCC 0x4061030B with 0x41A0EA60 Writing SCC 0x4061030C with 0x3840445C Writing SCC 0x4061030D with 0x38404E20 Writing SCC 0x4061030E with 0x384061A8 Writing SCC 0x4061030F with 0x38407530 Writing SCC 0x40610310 with 0x384088B8 Writing SCC 0x40610311 with 0x38409C40 Writing SCC 0x40610312 with 0x3CF0AFC8 Writing SCC 0x40610313 with 0x41A0C350 DB1.0 DCC 0 SCC configuration complete. DB SMB clock enabled. Waiting for SITE1 CB_READY... Testing SMB clock... Configuring MUXFPGA for MB. Setting DVI mode for VGA. Releasing Daughterboard resets. Switching MCC log to UART1. %BootMonitor-Warning, Unable to open SYSTEM.DAT ARM Versatile Express Boot Monitor Version: V5.1.9 Build Date: Dec 3 2012 Daughterboard Site 1: V2P-CA15_A7 Cortex A7 Daughterboard Site 2: Not Used Running boot script from flash - BOOTSCRIPT

11 years, 5 months

Failure to boot with 13.10

by Eric Huang

Jon, I tried to update my Vexpress TC2 to 13.10, but bootup seems to stuck at "Running boot script from flash BOOTSCRIPT". This is the first time I tried to switch to use UEFI with zImage. I updated the firmware of my VExpress following the steps listed in the release note. Any idea what I did wrong? Cmd> Powering up system... Daughterboard fitted to site 1. Switching on ATXPSU... ATX3V3: ON VIOset: 1.8V MBtemp: 37 degC Configuring motherboard (rev D, var A)... IOFPGA config: PASSED MUXFPGA config: PASSED OSC CLK config: PASSED Programming image \SOFTWARE\TC2\zimage.bin Erasing Flash . Writing Flash Updating eeprom with image zimage Image: zimage UPDATED from \SOFTWARE\TC2\zimage.bin Programming image \SOFTWARE\TC2\dtb.bin Erasing Flash . Writing Flash Updating eeprom with image dtb Image: dtb UPDATED from \SOFTWARE\TC2\dtb.bin Programming image \SOFTWARE\TC2\initrd.bin Erasing Flash . Writing Flash Updating eeprom with image initrd Image: initrd UPDATED from \SOFTWARE\TC2\initrd.bin Testing SMC devices (FPGA build 16)... SRAM 32MB test: PASSED VRAM 8MB test: PASSED LAN9118 test: PASSED USB & OTG test: PASSED KMI1/KMI2 test: PASSED MMC & SD test: PASSED DVI image test: PASSED AACI AC97 test: PASSED CF card test: PASSED UART port test: PASSED MAC addrs test: PASSED Reading Site 1 Board File \SITE1\HBI0249A\board.txt DB1 JTAG configuration complete. Setting DB1 OSCCLKS... DB1.0 DCC 0 SPI configuration complete. Writing SCC 0x40610007 with 0xFF00FF00 Writing SCC 0x40610046 with 0x01CD1011 Writing SCC 0x406101C0 with 0x1032F003 Writing SCC 0x40610100 with 0x33330C00 Writing SCC 0x40610048 with 0x022F1010 Writing SCC 0x40610049 with 0x0011710D Writing SCC 0x4061004A with 0x022F1010 Writing SCC 0x4061004B with 0x0011710D Writing SCC 0x4061004C with 0x022F1010 Writing SCC 0x4061004D with 0x0011710D Writing SCC 0x4061004E with 0x022F1010 Writing SCC 0x4061004F with 0x0011710D Writing SCC 0x40610300 with 0x00000005 Writing SCC 0x40610301 with 0x060E0356 Writing SCC 0x40610302 with 0x00000000 Writing SCC 0x40610303 with 0x00000000 Writing SCC 0x40610304 with 0x384061A8 Writing SCC 0x40610305 with 0x38407530 Writing SCC 0x40610306 with 0x384088B8 Writing SCC 0x40610307 with 0x38409C40 Writing SCC 0x40610308 with 0x3840AFC8 Writing SCC 0x40610309 with 0x3840C350 Writing SCC 0x4061030A with 0x3CF0D6D8 Writing SCC 0x4061030B with 0x41A0EA60 Writing SCC 0x4061030C with 0x3840445C Writing SCC 0x4061030D with 0x38404E20 Writing SCC 0x4061030E with 0x384061A8 Writing SCC 0x4061030F with 0x38407530 Writing SCC 0x40610310 with 0x384088B8 Writing SCC 0x40610311 with 0x38409C40 Writing SCC 0x40610312 with 0x3CF0AFC8 Writing SCC 0x40610313 with 0x41A0C350 DB1.0 DCC 0 SCC configuration complete. DB SMB clock enabled. Waiting for SITE1 CB_READY... Testing SMB clock... Configuring MUXFPGA for MB. Setting DVI mode for VGA. Releasing Daughterboard resets. Switching MCC log to UART1. %BootMonitor-Warning, Unable to open SYSTEM.DAT ARM Versatile Express Boot Monitor Version: V5.1.9 Build Date: Dec 3 2012 Daughterboard Site 1: V2P-CA15_A7 Cortex A7 Daughterboard Site 2: Not Used Running boot script from flash - BOOTSCRIPT

11 years, 5 months

what is manifest.xml used for?

by Alex Zhang

Hello, I am a newbie on linaro andrioid project. Hope this is the place where I can ask questions. When I build the android for pandaboard, I dont know which manifest.xml should be used, as I don understand the purpose of this file. Is there any place decribing this file? Also, what is overlay file used for and when should we use it in bulding the android? Thanks. -- Alex, *Dreams can come true – just believe.*

11 years, 5 months

KitKat sdcard problem, getFatVolumeId returns -1

by Jon Medhurst (Tixy)

Can anyone provide clues to help me get 'sdcard' partition working on Linaro Android KitKat images? Here's where I've got to so far... After updating the vexpress storage config for KitKat [1] the sdcard partition on Linaro Android images is getting mounted by vold, but apps can't access this because android.process.media keeps crashing in attachVolume because FileUtils.getFatVolumeId is returning -1. With MediaProvider hacked to provide verbose logging I get: V/MediaProvider( 2825): /storage/sdcard0 volume ID: -1 E/MediaProvider( 2825): Can't obtain external volume ID even though it's mounted. and I've verified the -1 comes from the call ioctl(fd, VFAT_IOCTL_GET_VOLUME_ID) in android_os_FileUtils_getFatVolumeId in frameworks/base/core/jni/android_os_FileUtils.cpp. Running 'mount' gives... rootfs / rootfs rw,relatime 0 0 tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0 devpts /dev/pts devpts rw,relatime,mode=600 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 tmpfs /mnt/secure tmpfs rw,relatime,mode=700 0 0 tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0 tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0 /sys/kernel/debug /sys/kernel/debug debugfs rw,relatime 0 0 /dev/block/sda2 /system ext4 ro,relatime,data=ordered 0 0 /dev/block/sda3 /cache ext4 rw,nosuid,nodev,noatime,errors=panic,data=ordered 0 0 /dev/block/sda5 /data ext4 rw,nosuid,nodev,noatime,errors=panic,data=ordered 0 0 nodev /dev/gator gatorfs rw,relatime 0 0 /dev/block/vold/8:6 /mnt/media_rw/sdcard0 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1023,gid=1023,fmask=0007,dmask=0007,allow_utime=0020,codepage=437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0 /dev/block/vold/8:6 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1023,gid=1023,fmask=0007,dmask=0007,allow_utime=0020,codepage=437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0 /dev/fuse /storage/sdcard0 fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0 So first guess would be that fuse doesn't support this function, however as this seems to be the standard Android way of doing things, you would assume that it should work...? [1] http://review.android.git.linaro.org/#/c/4563/2 -- Tixy

11 years, 5 months

Time to drop /mnt/sdcard from init.rc?

by Jon Medhurst (Tixy)

Linaro's patches to system/core/rootdir/init.rc include mkdir /mnt/sdcard 0000 system system and symlink /mnt/sdcard /sdcard is it time to drop these now that AOSP documentation examples have external media under /storage/sdcard0,1 etc and the docs [1] say: When configuring a device-specific init.rc script, the EXTERNAL_STORAGE environment variable must be defined as the path to the primary external storage. The /sdcard path must also resolve to the same location, possibly through a symlink. For vexpress [2] I added symlink /storage/sdcard0 /sdcard but this is currently being overwritten by the generic init.rc. [1] http://source.android.com/devices/tech/storage/config.html [2] http://review.android.git.linaro.org/#/c/4563/2/init.partitions.arm-versati… -- Tixy

11 years, 5 months

Release Critical Test Result Summary of Calendar Week 46,2013 for Linaro Android Jellybean.

by Soumya Basak

Calendar Week 46 2013: Here is release critical test result summary for Linaro Android Jellybean image on following boards: 1) TI Panda 4430; 2) TI Panda 4460; 3) Galaxy Nexus; 4) ARM Versatile Express A9; 5) Versatile Express LSK TC2; 1) TI Panda 4430 + Linaro Android Jellybean (Column: BI) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… 2) TI Panda 4460 + Linaro Android Jellybean (Column: BI) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadGVWd… 3) Galaxy Nexus + Linaro Android Jellybean (Column: M) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AuNOCeo15fRHdFhhe… 4) ARM Versatile Express A9 + Linaro Android Jellybean (Column: BH) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… 5) Versatile Express LSK TC2 + Linaro Android Jellybean (Column: G) https://docs.google.com/a/linaro.org/spreadsheet/ccc?key=0AkxwyUNxNaAadExQd… please refer to the test result spreadsheet. Thank You. Best Regards Soumya Basak.

11 years, 5 months

Re: Compilation Errors on Android 4.4 for Pandaboard

by Vishal Bhoj

Hi Guys, I have been hitting similar errors but randomly.This time I triggered a make -j4,and this is the failure that I saw: prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8-linaro/bin/arm-linux-androideabi-gcc -I external/tcpdump/missing -I external/openssl/include -I external/libpcap -I external/tcpdump -I out/target/product/hi4511/obj/EXECUTABLES/tcpdump_intermediates -I libnativehelper/include/nativehelper -isystem system/core/include -isystem hardware/libhardware/include -isystem hardware/libhardware_legacy/include -isystem hardware/ril/include -isystem libnativehelper/include -isystem frameworks/native/include -isystem frameworks/native/opengl/include -isystem frameworks/av/include -isystem frameworks/base/include -isystem external/skia/include -isystem out/target/product/hi4511/obj/include -isystem bionic/libc/arch-arm/include -isystem bionic/libc/include -isystem bionic/libstdc++/include -isystem bionic/libc/kernel/common -isystem bionic/libc/kernel/arch-arm -isystem bionic/libm/include -isystem bionic/libm/include/arm -isystem bionic/libthread_db/include -c -fno-exceptions -Wno-multichar -msoft-float -fpic -fPIE -ffunction-sections -fdata-sections -funwind-tables -fstack-protector -Wa,--noexecstack -Werror=format-security -D_FORTIFY_SOURCE=2 -fno-short-enums -march=armv7-a -mfloat-abi=softfp -mfpu=neon -include build/core/combo/include/arch/linux-arm/AndroidConfig.h -I build/core/combo/include/arch/linux-arm/ -Wno-unused-but-set-variable -fno-builtin-sin -fno-strict-volatile-bitfields -Wno-psabi -mthumb-interwork -DANDROID -fmessage-length=0 -W -Wall -Wno-unused -Winit-self -Wpointer-arith -Werror=return-type -Werror=non-virtual-dtor -Werror=address -Werror=sequence-point -O3 -g -Wstrict-aliasing=2 -Werror=strict-aliasing -DNDEBUG -g -Wstrict-aliasing=2 -Werror=strict-aliasing -fgcse-after-reload -frerun-cse-after-loop -frename-registers -DNDEBUG -UDEBUG -mthumb -O3 -fomit-frame-pointer -fstrict-aliasing -Wstrict-aliasing=2 -Werror=strict-aliasing -g -fno-strict-aliasing -DHAVE_CONFIG_H -D_U_="__attribute__((unused))" -MD -MF out/target/product/hi4511/obj/EXECUTABLES/tcpdump_intermediates/print-ascii.d -o out/target/product/hi4511/obj/EXECUTABLES/tcpdump_intermediates/print-ascii.o external/tcpdump/print-ascii.c external/tcpdump/print-802_11.c: In function 'ieee802_11_print': external/tcpdump/print-802_11.c:968:23: warning: 'dst' may be used uninitialized in this function [-Wmaybe-uninitialized] } else if (llc_print(p, length, caplen, dst, src, ^ external/tcpdump/print-802_11.c:968:23: warning: 'src' may be used uninitialized in this function [-Wmaybe-uninitialized] cp out/target/product/hi4511/obj/EXECUTABLES/tcpdump_intermediates/print-arp.d out/target/product/hi4511/obj/EXECUTABLES/tcpdump_intermediates/print-arp.P; sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$//' -e '/^$/ d' -e 's/$/ :/' < out/target/product/hi4511/obj/EXECUTABLES/tcpdump_intermediates/print-arp.d >> out/target/product/hi4511/obj/EXECUTABLES/tcpdump_intermediates/print-arp.P; rm -f out/target/product/hi4511/obj/EXECUTABLES/tcpdump_intermediates/print-arp.d target thumb C: tcpdump <= external/tcpdump/print-atalk.c prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8-linaro/bin/arm-linux-androideabi-gcc -I external/tcpdump/missing -I external/openssl/include -I external/libpcap -I external/tcpdump -I out/target/product/hi4511/obj/EXECUTABLES/tcpdump_intermediates -I libnativehelper/include/nativehelper -isystem system/core/include -isystem hardware/libhardware/include -isystem hardware/libhardware_legacy/include -isystem hardware/ril/include -isystem libnativehelper/include -isystem frameworks/native/include -isystem frameworks/native/opengl/include -isystem frameworks/av/include -isystem frameworks/base/include -isystem external/skia/include -isystem out/target/product/hi4511/obj/include -isystem bionic/libc/arch-arm/include -isystem bionic/libc/include -isystem bionic/libstdc++/include -isystem bionic/libc/kernel/common -isystem bionic/libc/kernel/arch-arm -isystem bionic/libm/include -isystem bionic/libm/include/arm -isystem bionic/libthread_db/include -c -fno-exceptions -Wno-multichar -msoft-float -fpic -fPIE -ffunction-sections -fdata-sections -funwind-tables -fstack-protector -Wa,--noexecstack -Werror=format-security -D_FORTIFY_SOURCE=2 -fno-short-enums -march=armv7-a -mfloat-abi=softfp -mfpu=neon -include build/core/combo/include/arch/linux-arm/AndroidConfig.h -I build/core/combo/include/arch/linux-arm/ -Wno-unused-but-set-variable -fno-builtin-sin -fno-strict-volatile-bitfields -Wno-psabi -mthumb-interwork -DANDROID -fmessage-length=0 -W -Wall -Wno-unused -Winit-self -Wpointer-arith -Werror=return-type -Werror=non-virtual-dtor -Werror=address -Werror=sequence-point -O3 -g -Wstrict-aliasing=2 -Werror=strict-aliasing -DNDEBUG -g -Wstrict-aliasing=2 -Werror=strict-aliasing -fgcse-after-reload -frerun-cse-after-loop -frename-registers -DNDEBUG -UDEBUG -mthumb -O3 -fomit-frame-pointer -fstrict-aliasing -Wstrict-aliasing=2 -Werror=strict-aliasing -g -fno-strict-aliasing -DHAVE_CONFIG_H -D_U_="__attribute__((unused))" -MD -MF out/target/product/hi4511/obj/EXECUTABLES/tcpdump_intermediates/print-atalk.d -o out/target/product/hi4511/obj/EXECUTABLES/tcpdump_intermediates/print-atalk.o external/tcpdump/print-atalk.c external/tcpdump/print-802_11.c:991:1: internal compiler error: Segmentation fault } ^ Please submit a full bug report, with preprocessed source if appropriate. See <http://gcc.gnu.org/bugs.html> for instructions. make: *** [out/target/product/hi4511/obj/EXECUTABLES/tcpdump_intermediates/print-802_11.o] Error 1 make: *** Waiting for unfinished jobs.... But I don't see the error when I compile manually the same file. Are these errors showing up due to resource issue on host or is it genuinely a compiler bug ? On 12 November 2013 14:09, Harigopal Gollamudi < harigopal.gollamudi(a)linaro.org> wrote: > HI Bero, > > While compiling panda 4.4 I am getting the following error : > > prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8-linaro/bin/arm-linux-androideabi-g++ > -nostdlib -Bdynamic -fPIE -pie -Wl,-dynamic-linker,/system/bin/linker > -Wl,--gc-sections -Wl,-z,nocopyreloc > -Lout/target/product/pandaboard/obj/lib > -Wl,-rpath-link=out/target/product/pandaboard/obj/lib > out/target/product/pandaboard/obj/lib/crtbegin_dynamic.o > out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/main.o > out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/bc.o > out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/scan.o > out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/execute.o > out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/load.o > out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/storage.o > out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/util.o > out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/global.o > out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/warranty.o > out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/number.o > -Wl,--whole-archive -Wl,--no-whole-archive > out/target/product/pandaboard/obj/STATIC_LIBRARIES/libcutils_intermediates/libcutils.a > out/target/product/pandaboard/obj/STATIC_LIBRARIES/libc_intermediates/libc.a > out/target/product/pandaboard/obj/STATIC_LIBRARIES/libcompiler_rt-extras_intermediates/libcompiler_rt-extras.a > -lc -lstdc++ -lm -o > out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/LINKED/bc > -Wl,-O2 -Wl,-z,noexecstack -Wl,-z,relro -Wl,-z,now > -Wl,--warn-shared-textrel -Wl,--fatal-warnings -Wl,--icf=safe > -Wl,--no-fix-cortex-a8 -Wl,--no-undefined > /home/harigopal.gollamudi/panda_v4.4/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8-linaro/bin/../lib/gcc/arm-linux-androideabi/4.8.2/armv7-a/libgcc.a > out/target/product/pandaboard/obj/lib/crtend_android.o > > /home/harigopal.gollamudi/panda_v4.4/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.8.2/real-ld: > error: > out/target/product/pandaboard/obj/STATIC_LIBRARIES/libc_intermediates/libc.a(err.o): > multiple definition of 'warn' > /home/harigopal.gollamudi/panda_v4.4/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.8.2/real-ld: > out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/util.o: > previous definition here > collect2: error: ld returned 1 exit status > make: *** > [out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/LINKED/bc] > Error 1 > > Regards, > Harigopal > > > > > On 11 November 2013 22:41, Vishal Bhoj <vishal.bhoj(a)linaro.org> wrote: > >> I got this error on hisilicon build with our latest toolchain. built with >> this configuration: >> TARGET_CPU_ABI := armeabi-v7a >> TARGET_CPU_ABI2 := armeabi >> TARGET_CPU_VARIANT := cortex-a9 >> >> TARGET_ARCH := arm >> # Enable NEON feature >> TARGET_ARCH_VARIANT := armv7-a-neon >> >> >> >> On 11 November 2013 22:31, Bernhard Rosenkränzer < >> bernhard.rosenkranzer(a)linaro.org> wrote: >> >>> No, that looks really bad... >>> >>> Is this with our compiler? What flags? >>> Doesn't seem to happen when building for Nexus devices. >>> >>> ttyl >>> bero >>> >>> >>> On 11 November 2013 16:54, Vishal Bhoj <vishal.bhoj(a)linaro.org> wrote: >>> >>>> Hi Bero, >>>> >>>> Have you seen this error: >>>> external/chromium/base/values.cc: In member function 'bool >>>> DictionaryValue::HasKey(const string&) const': >>>> external/chromium/base/values.cc:321:6: internal compiler error: >>>> Segmentation fault >>>> bool DictionaryValue::HasKey(const std::string& key) const { >>>> ^ >>>> Please submit a full bug report, >>>> with preprocessed source if appropriate. >>>> See <http://gcc.gnu.org/bugs.html> for instructions. >>>> make: *** >>>> [out/target/product/hi4511/obj/SHARED_LIBRARIES/libchromium_net_intermediates/base/values.o] >>>> Error 1 >>>> make: *** Waiting for unfinished jobs.... >>>> >>>> >>>> >>>> On 11 November 2013 20:03, Bernhard Rosenkränzer < >>>> bernhard.rosenkranzer(a)linaro.org> wrote: >>>> >>>>> Hi, >>>>> >>>>> fatal: read error: Connection reset by peer >>>>> fatal: read error: Connection reset by peer >>>>> >>>>> This is a random infrastructure error. >>>>> >>>>> ttyl >>>>> bero >>>>> >>>>> >>>>> >>>>> On 11 November 2013 14:37, Harigopal Gollamudi < >>>>> harigopal.gollamudi(a)linaro.org> wrote: >>>>> >>>>>> Hi Bero, >>>>>> >>>>>> Please find the log file attached for the Error which I am getting. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On 11 November 2013 18:33, Bernhard Rosenkränzer < >>>>>> bernhard.rosenkranzer(a)linaro.org> wrote: >>>>>> >>>>>>> Hi, >>>>>>> there's no error in there... (collect2: error: ld returned exit >>>>>>> status is a reference to something that happened before on another CPU, >>>>>>> look for "Error 1" in the output preceding it). >>>>>>> >>>>>>> ttyl >>>>>>> bero >>>>>>> >>>>>>> >>>>>>> On 11 November 2013 13:44, Harigopal Gollamudi < >>>>>>> harigopal.gollamudi(a)linaro.org> wrote: >>>>>>> >>>>>>>> Hi Bero, >>>>>>>> >>>>>>>> Now the compilation error is different for me >>>>>>>> >>>>>>>> bench_close >>>>>>>> (out/target/product/pandaboard/obj/EXECUTABLES/bench_close_intermediates/LINKED/bench_close) >>>>>>>> prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8-linaro/bin/arm-linux-androideabi-g++ >>>>>>>> -nostdlib -Bdynamic -fPIE -pie -Wl,-dynamic-linker,/system/bin/linker >>>>>>>> -Wl,--gc-sections -Wl,-z,nocopyreloc >>>>>>>> -Lout/target/product/pandaboard/obj/lib >>>>>>>> -Wl,-rpath-link=out/target/product/pandaboard/obj/lib >>>>>>>> out/target/product/pandaboard/obj/lib/crtbegin_dynamic.o >>>>>>>> out/target/product/pandaboard/obj/EXECUTABLES/bench_close_intermediates/close.o >>>>>>>> -Wl,--whole-archive -Wl,--no-whole-archive >>>>>>>> out/target/product/pandaboard/obj/STATIC_LIBRARIES/libmicro_intermediates/libmicro.a >>>>>>>> out/target/product/pandaboard/obj/STATIC_LIBRARIES/libcompiler_rt-extras_intermediates/libcompiler_rt-extras.a >>>>>>>> -lc -lstdc++ -lm -o >>>>>>>> out/target/product/pandaboard/obj/EXECUTABLES/bench_close_intermediates/LINKED/bench_close >>>>>>>> -Wl,-O2 -Wl,-z,noexecstack -Wl,-z,relro -Wl,-z,now >>>>>>>> -Wl,--warn-shared-textrel -Wl,--fatal-warnings -Wl,--icf=safe >>>>>>>> -Wl,--no-fix-cortex-a8 -Wl,--no-undefined >>>>>>>> /home/harigopal.gollamudi/panda_v4.4/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8-linaro/bin/../lib/gcc/arm-linux-androideabi/4.8.2/armv7-a/libgcc.a >>>>>>>> out/target/product/pandaboard/obj/lib/crtend_android.o >>>>>>>> collect2: error: ld returned 1 exit status >>>>>>>> make: *** >>>>>>>> [out/target/product/pandaboard/obj/EXECUTABLES/bc_intermediates/LINKED/bc] >>>>>>>> Error 1 >>>>>>>> make: *** Waiting for unfinished jobs.... >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On 11 November 2013 17:57, Pranav Tipnis <pranav.tipnis(a)linaro.org>wrote: >>>>>>>> >>>>>>>>> Hi Bero, >>>>>>>>> >>>>>>>>> Sad news :(. I am getting following error now: >>>>>>>>> >>>>>>>>> /home/pranav/arndale_4.4/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.8.2/real-ld: >>>>>>>>> error: >>>>>>>>> out/target/product/arndale/obj/STATIC_LIBRARIES/libc_intermediates/libc.a(err.o): >>>>>>>>> multiple definition of 'warn' >>>>>>>>> /home/pranav/arndale_4.4/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.8-linaro/bin/../libexec/gcc/arm-linux-androideabi/4.8.2/real-ld: >>>>>>>>> out/target/product/arndale/obj/EXECUTABLES/bc_intermediates/util.o: >>>>>>>>> previous definition here >>>>>>>>> collect2: error: ld returned 1 exit status >>>>>>>>> target Symbolic: libwnndict >>>>>>>>> (out/target/product/arndale/symbols/system/lib/libwnndict.so) >>>>>>>>> make: *** >>>>>>>>> [out/target/product/arndale/obj/EXECUTABLES/bc_intermediates/LINKED/bc] >>>>>>>>> Error 1 >>>>>>>>> make: *** Waiting for unfinished jobs.... >>>>>>>>> >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> Pranav >>>>>>>>> >>>>>>>>> >>>>>>>>> On 11 November 2013 17:22, Pranav Tipnis <pranav.tipnis(a)linaro.org >>>>>>>>> > wrote: >>>>>>>>> >>>>>>>>>> Hi Bero, >>>>>>>>>> >>>>>>>>>> It seems to work. Earlier the error used to come immediately on >>>>>>>>>> starting the build. But now the build is running. Will let you know once it >>>>>>>>>> builds completely. >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> Pranav >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 11 November 2013 15:05, Bernhard Rosenkränzer < >>>>>>>>>> bernhard.rosenkranzer(a)linaro.org> wrote: >>>>>>>>>> >>>>>>>>>>> Ok, try again now >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On 11 November 2013 10:33, Bernhard Rosenkränzer < >>>>>>>>>>> bernhard.rosenkranzer(a)linaro.org> wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi, >>>>>>>>>>>> this looks like something the workaround for the broken host >>>>>>>>>>>> toolchain on android-build could introduce... (I couldn't test that one >>>>>>>>>>>> because my local host toolchain isn't broken). >>>>>>>>>>>> >>>>>>>>>>>> I'll try to commit another variant of that fix, should be done >>>>>>>>>>>> in 5 minutes or so. >>>>>>>>>>>> >>>>>>>>>>>> ttyl >>>>>>>>>>>> bero >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On 11 November 2013 07:45, Harigopal Gollamudi < >>>>>>>>>>>> harigopal.gollamudi(a)linaro.org> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Hi Bero, >>>>>>>>>>>>> >>>>>>>>>>>>> While building Android 4.4 for pandaboard, I am getting the >>>>>>>>>>>>> errors on latest synced source. >>>>>>>>>>>>> >>>>>>>>>>>>> Please find the attached Error log. >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> Thanks and Regards, >>>>>>>>>>>>> HariGopal G >>>>>>>>>>>>> Android Engineer >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Thanks and Regards, >>>>>>>> HariGopal G >>>>>>>> Android Engineer >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Thanks and Regards, >>>>>> HariGopal G >>>>>> Android Engineer >>>>>> >>>>> >>>>> >>>> >>> >> > > > -- > Thanks and Regards, > HariGopal G > Android Engineer >

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-android