Linaro-android April 2012

linaro-android@lists.linaro.org

51 participants
64 discussions

by Zach Pfeffer

Hey team, Gonna get 12.05 planning underway today when I get back from Samsung. If anyone's interested in working on something that isn't on the general radar, please let me know. -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 1 month

Linaro on Panda Board

by rknollman＠juno.com

Help- I have a new Panda board (the box label says UEVM4460G-02-01-00) with a 16 GB SD card and DVI monitor, with Ubuntu 10.04 as the dev platform. I have been trying a number of different pre-built Android binaries (starting at pandaboard.org and following instructions there (Quickstart with pre-built binaries) which takes me to omappedia and linaro, but can't seem to get any to come to full running status. The release with most success is 12.03, but as soon as the "Android" shimmer screen is replaced with the Android environment, a window pops up to say "Unfortunately, Launcher has stopped". Some green blocks are moving about the screen at approx a one second interval, and moving the mouse causes the cursor to move very slowly, in sync with the green block movements. A few icons are shown at bottom left, and time of day is shown at bottom right. Nothing else is visible on the screen. Pressing the reset button cause a reboot, but this time it gets no further than the Android shimmer screen. The TTY console shows what appears to be an endless loop of a few dozen events, all seeming to repeat themselves. Not sure what details are needed to get past this problem, any help would be most appreciated. I have also tried releases 12.01, 12.02, and 11.11. None of these even show anything on the monitor. Thanks, Ron ____________________________________________________________ 53 Year Old Mom Looks 33 The Stunning Results of Her Wrinkle Trick Has Botox Doctors Worried http://thirdpartyoffers.juno.com/TGL3131/4f94bdbf27e2681f827st01vuc

13 years, 1 month

[ANN] Android restricted-access builds

by Paul Sokolovsky

Hello, Linaro Infrastructure group is glad to announce support for restricted-access builds for Linaro Android. Such builds will allow us to adhere to our members' licensing and business restrictions for limited-access features, while still as much as possible to follow established Linaro open process, and let general public to be in loop on the upcoming great new features for the ARM platform. Restricted builds are used immediately for ongoing big.LITTLE enablement work. Restricted builds are available in our standard Android Build System, in a separate tab: https://android-build.linaro.org/#builds=restricted Members of the Launchpad group "linaro-android-restricted" are able to setup new builds (please note that this group doesn't allow direct access to restricted source code or downloads, only gives the ability to establish a restricted build). Administrators of the group include Alexander Sack and Zach Pfeffer, they should be contacted for membership requests. To set up a restricted build, select "linaro-android-restricted" as the owning group in the dropdown on "New build" page (this is UI change from previously available checkbox to create an official build, all choices are now available in dropdown). As second step, add/replace value of the following build config variable: BUILD_TYPE=build-android-restricted If you have a question regarding this functionality or found a bug, please submit it directly or via the bug tracker at: https://bugs.launchpad.net/linaro-android-infrastructure Thanks, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 1 month

Agenda posted to https://wiki.linaro.org/Platform/Android/Meetings/2012-04-25

by Zach Pfeffer

Please post your status before the meeting and add to the agenda. I should be able to run the meeting. See you all soon! -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 1 month

Re: [png-mng-implement] libpng 1.5.x breaks Android

by Mans Rullgard

On 24 April 2012 18:34, Mans Rullgard <mans.rullgard(a)linaro.org> wrote: > On 24 April 2012 18:21, Chris <tichris08(a)gmail.com> wrote: >> Hi, >> >> I'm trying to upgrade Android's aging libpng 1.2.46 to 1.5.10 and I'm >> running into a nasty issue. I'm particularly running into a problem >> while running a tool in Android on x86 called aapt, which can be thought >> of as a resource packager which uses PNG's writing ability to make a >> huge binary asset. I was able to get the code to compile without any >> issues on all versions of libpng (1.2, 1.4, 1.5) and it works fine with >> the default config for 1.2 and 1.4 but fails on 1.5 with an "internal >> write transform logic error". >> >> I debugged the code a little bit and saw that it is failing because I'm >> failing the test: >> (row_info.pixel_depth != png_ptr->pixel_depth) >> >> Given: >> >> row_info->{colortype=2, width=46, channels=3, bit_depth=8, >> pixel_depth=24, row_bytes=138} >> png_ptr ->{colortype=6, width=46, channels=4, bit_depth=8, >> pixel_depth=32, row_bytes=184} >> >> I do have a "filler" transformation on my source data to remove the >> alpha channel which explains how row_info started off to be the same as >> png_ptr, but was switched to having one less channel. I can't really >> think of a way to pass the above-mentioned test with a filler >> transformation. Is this a bug in libpng or is aapt using the library >> incorrectly and this path that used to work no longer does for a good >> reason? > > IIRC we saw this error when trying the same upgrade in Linaro, but > I can't remember what the conclusion was. Maybe someone on the > linaro-android list can help. Silly gmail auto-complete picked a bad address for linaro-android. Trying again. -- Mans Rullgard / mru

13 years, 1 month

adb question

by Linas Chang

Dear linaro-support team Currently , I used linaro-android_snowball-ics-gcc46-igloo-stable-blob-12.03-release at your snowboard I face a question , that is When I used adb , follow below command form your web-site * ADB only works over IP In the console type: * stop adbd * setprop service.adb.tcp.port 6565 * start adbd * ifconfig eth0 # to get boardsIP after my host connect to device , I try to used adb push -s <device IP>:6565 <my txt file> /data or adb -s <device ip>:6565 shell form host Both fail ,and I didn't see any error meaage , it look like hang after I type above adb command Do you have any suggestion about this Thanks for your help Linas

13 years, 1 month

CopyToSlave plugin takes (took) lot of build's time due to load of snowball tarballs

by Paul Sokolovsky

Hello, On Fri, we discovered that build started to take lot of time (30+ mins) on the CopyToSlave stage (one of the first on build startup) to copy EULA-protected binary blobs to a build slave. This adversely affected ability to restrict build/EULA handling changes/RCs (few timed out as was reported by Fathi). This could be attributed only to http://snapshots.linaro.org/android/binaries/snowball/ receiving five 100MB drops over last 10 days, or 500% or so growth, which uncovered poor throughput of CopyToSlave plugin. Due to inconveniences it brings, I applied a quick dirty solution of mirroring only the latest tarball from http://snapshots.linaro.org/android/binaries/snowball/ . Let me know if you see any issues. And that solution needs to be cleaned/generalized of course. https://bugs.launchpad.net/linaro-android-infrastructure/+bug/987189 -- Best Regards, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 1 month

Linaro Android 12.04 blueprints

by Fathi Boudra

Hi Android Team, Linaro Android 12.04 release has been cut. QA testing is in progress. Please, update your blueprints for this cycle asap: https://launchpad.net/linaro-android/+milestone/12.04 Cheers, -- Fathi Boudra Linaro Release Manager | Validation Project Manager Linaro.org | Open source software for ARM SoCs

13 years, 1 month

Re: Linaro Android 12.04 final builds

by Zach Pfeffer

Awesome! Great job guys. On 21 April 2012 07:59, Fathi Boudra <fathi.boudra(a)linaro.org> wrote: > Linaro Android 12.04 final builds: > > https://android-build.linaro.org/builds/~linaro-android/panda-ics-gcc47-til… > https://android-build.linaro.org/builds/~linaro-android/snowball-ics-gcc46-… > https://android-build.linaro.org/builds/~linaro-android/origen-ics-gcc47-sa… > https://android-build.linaro.org/builds/~linaro-android/imx6-ics-gcc47-free… > https://android-build.linaro.org/builds/~linaro-android/imx53-ics-gcc47-fre… > https://android-build.linaro.org/builds/~linaro-android/vexpress-ics-gcc47-… > https://android-build.linaro.org/builds/~linaro-android/vexpress-rtsm-ics-g… > > Cheers, > -- > Fathi Boudra > Linaro Release Manager | Validation Project Manager > Linaro.org | Open source software for ARM SoCs -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

13 years, 1 month

880459, audio doesn't work on i.MX53 Android

by Guodong Xu

HI,Bero and Android team For this issue, https://bugs.launchpad.net/linaro-landing-team-freescale/+bug/880459 Actually, Audio works fine in Ubuntu LEB. But not working on Android LEB. This should not be a problem in kernel. So, could you please provide us your analysis from user space first? Thanks. Best regards, Guodong Xu

13 years, 1 month

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-android April 2012