Linaro-android January 2012

linaro-android@lists.linaro.org

36 participants
65 discussions

[MAINT] Android Build frontend goes down for maintenance

by Paul Sokolovsky

Hello, https://android-build.linaro.org goes down for maintenance, approved by Zach. ETA is 30min. There will be another email sent when the system is up again. Please don't use the frontend during this time. Expected outcome is resolution of artifacts transfer failures to snapshots.linaro.org which which we experienced today (and for some builds, for the last 2 days). Thanks, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years

Omission in wiki.linaro.org/Platform/Android/BuildSource

by Paul Sokolovsky

Hello, I had a look at the latest http://wiki.linaro.org/Platform/Android/BuildSource and see that it doesn't mention the need to run ". build/envsetup.sh" explicitly. I don't know if that's omitted deliberately or just forgotten. I don't if it works without it or no (I would doubt it does, but maybe there were changes to makefiles and stuff). What I know is that on the Android Build, we do source build/envsetup.sh, so not having it on that page is a problem which can lead to build discrepancies between local and Jenkins (and as we know, that happens from time). So, it would be nice to have this settled and fixed. Thanks, Paul Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years

Merged ECM...

by Zach Pfeffer

Kejun has done a great job with ECM. In case anything goes wrong the relevant commits are: <kejun-zhou> http://review.android.git.linaro.org/#change,1371 <kejun-zhou> http://review.android.git.linaro.org/#change,1372 <kejun-zhou> http://review.android.git.linaro.org/#change,1373 Kicked off landing-snowball, staging-origen, tracking-panda, staging-imx53 and staging-vexpress-a9. Abhishek and Amit, would you test the builds once they're done? -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years

Busted my hand may be slow to respond...

by Zach Pfeffer

Off to get a little rest. Good news is they don't think its broken. -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years

Agenda posted for tomorrow's meeting at https://wiki.linaro.org/Platform/Android/Meetings/2012-01-11

by Zach Pfeffer

Please fill out your status. Also, there are a lot of outstanding AIs. Please get these done or file a Bug or BP to track. Thanks! -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years

For those who haven't registered the Android Builder Summit & Embedded Linux Conference.

by Botao Sun

Hi, I find there is a tricky discount which is hidden between the ABS and ELC events. If you want to get that discount, register the ELC first. During the ELC registration pages, it will tell you if you also want to attend the ABS, the ticket price will be USD 150. The original ABS ticket price is USD 325. But there is no any discount information if you register ABS first. So if you register the ABS first (like me, unfortunately), you will pay the full ticket price on both events. I have sent an email to them to ask the refund but I'm not sure they will accept. I haven't received their feedback yet. FYI. BR Botao Sun

14 years

Wrote up a How to Create a Release wiki

by Zach Pfeffer

https://wiki.linaro.org/Platform/Android/CreateARelease Enjoy! -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years

Streamline benchmark delivery to toolchain

by Zach Pfeffer

We've started to spin up an effort to automate Android benchmarks in LAVA (thanks Andy and Bero). The toolchain group is interested in these results and would like the results in raw text form so that they can extend their parser to read it. I figured we should just shoot for this first since getting benchmark results to the toolchain group is very important. Does this sound good to you Andy and Bero? Michael/Åsa would you guys mind sending a sample of a preferred format and how you'd like it delivered? Paul, what ways can LAVA push out a text file? -- Zach Pfeffer Android Platform Team Lead, Linaro Platform Teams Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog

14 years

Re: Good news for USB on Snowball

by Mathieu Poirier

Friends, Jesse found this connector: http://parts.digikey.com/1/parts/1637446-cbl-usb-a-rcpt-mini-a-plug-102mm-1… It *should* work and for our friends in India I just found this: http://www.digikey.in/ Happy shopping, Mathieu. PS: If someone ends up buying the connector please get back to us with your results. On 12-01-10 03:50 PM, Mathieu Poirier wrote: > > Jesse, > > That is an interesting setup you have there. I have a mini A > interfacing to a standard USB A male > > See this link: http://en.wikipedia.org/wiki/File:Mini_usb_AB.jpg > > What needs to get in to the OTG port on the Snowball is a true mini A > (shown on the left in above link). If a mini B (shown on the right) is > used the board will get powered and devices won't be discovered. > > Mini A connectors are very hard to find in the US. If you're fortunate > enough to have one go ahead and try it. > > Mathieu. > > On 12-01-10 03:35 PM, Jesse Barker wrote: >> Silly question. Do you know if an adapter would cause a problem? The >> hub I have is mini-USB to the hub, and the cable that came with it is >> mini-USB to USB-A (I have an adapter to make the cable mini-USB at >> both ends). >> >> cheers, >> Jesse >> >> On Tue, Jan 10, 2012 at 2:26 PM, Mathieu Poirier >> <mathieu.poirier(a)linaro.org> wrote: >>> I suppose gurus at STE found a work around - I don't have more details >>> on the solution. >>> >>> I have a very basic Dynex 4 port hub. See http://bit.ly/ywaqjT . >>> >>> Mathieu. >>> >>> On 12-01-10 03:11 PM, Zach Pfeffer wrote: >>>> On 10 January 2012 14:36, Mathieu Poirier <mathieu.poirier(a)linaro.org> wrote: >>>>> Good day all, >>>>> >>>>> It is now possible to get input from multiple USB device using a powered >>>>> USB hub. In my current setup I have a mouse and a keyboard and >>>>> everything works well. Only basic functionality is supported - USB hot >>>>> plug and return from hibernation will not work. >>>>> >>>>> This has been tested on landing-snowball builds for kernel 3.0 and 3.1, >>>>> the latest can be found here: >>>>> >>>>> https://android-build.linaro.org/builds/~linaro-android/staging-snowball/#b… >>>>> >>>>> The feature has been proven to work with V5 and V11 boards. >>>>> >>>>> Special thanks to our 3-stars kernel engineer Philippe Langlais and the >>>>> STE connectivity team for their relentlessness work on this problem. >>>> >>>> Nicely done Mathieu! >>>> >>>> This had been thought to be a hardware problem. Could you expand on >>>> the solution a little bit and list the USB hub you're using to test >>>> with? >>>> >>>>> Best regards, >>>>> Mathieu. >>>>> >>>>> _______________________________________________ >>>>> linaro-android mailing list >>>>> linaro-android(a)lists.linaro.org >>>>> http://lists.linaro.org/mailman/listinfo/linaro-android >>>> >>>> >>>> >>> >>> >>> _______________________________________________ >>> linaro-android mailing list >>> linaro-android(a)lists.linaro.org >>> http://lists.linaro.org/mailman/listinfo/linaro-android >

14 years

Good news for USB on Snowball

by Mathieu Poirier

Good day all, It is now possible to get input from multiple USB device using a powered USB hub. In my current setup I have a mouse and a keyboard and everything works well. Only basic functionality is supported - USB hot plug and return from hibernation will not work. This has been tested on landing-snowball builds for kernel 3.0 and 3.1, the latest can be found here: https://android-build.linaro.org/builds/~linaro-android/staging-snowball/#b… The feature has been proven to work with V5 and V11 boards. Special thanks to our 3-stars kernel engineer Philippe Langlais and the STE connectivity team for their relentlessness work on this problem. Best regards, Mathieu.

14 years

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Linaro-android January 2012