Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160307/
Failed boards:
colibri-vf61 arm-multi_v7_defconfig : FAILED 1:21.56 colombus arm-multi_v7_defconfig : FAILED 3:27.26 colombus arm-multi_lpae_defconfig : FAILED 3:10.58 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.69 cosmic arm-imx_v6_v7_defconfig : FAILED 2:06.50 cosmic arm-multi_v7_defconfig : FAILED 2:06.60 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:23.00 minnowmax minnowmax_defconfig : NO BUILD omap5uevm arm-multi_v7_defconfig : FAILED 2:06.75 omap5uevm arm-multi_lpae_defconfig : FAILED 2:06.46 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:16.88 pi arm-exynos_defconfig : FAILED 1:47.15 pi arm-multi_v7_defconfig : FAILED 2:00.04 pi arm-multi_lpae_defconfig : FAILED 3:04.74 pit arm-exynos_defconfig : FAILED 1:48.95 seaboard arm-tegra_defconfig : FAILED 1:56.11 snow arm-multi_v7_nosmp_defconfig : FAILED 3:16.32 snowball arm-u8500_defconfig : FAILED 1:19.69 snowball arm-multi_v7_defconfig : FAILED 1:23.88 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:34.33 wandboard arm-imx_v6_v7_defconfig : FAILED 2:57.61
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:30.80 bbb arm-omap2plus_defconfig : passed 1:42.68 bbb arm-multi_v7_defconfig : passed 1:17.08 bbb arm-multi_v7_nosmp_defconfig : passed 1:20.69 beagleboard-x15 arm-omap2plus_defconfig : passed 0:52.43 beagleboard-x15 arm-multi_v7_defconfig : passed 0:44.95 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:41.93 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 1:03.12 beaver arm-tegra_defconfig : passed 1:33.76 beaver arm-multi_v7_defconfig : passed 1:44.59 beaver arm-multi_v7_nosmp_defconfig : warnings 1:57.98 capri arm-bcm_defconfig : passed 0:46.26 capri arm-multi_v7_defconfig : passed 0:59.89 capri arm-multi_v7_nosmp_defconfig : warnings 0:51.42 chitra powerpc-pasemi_defconfig : passed 2:00.79 chitra powerpc-ppc64_defconfig : passed 2:12.52 colibri-vf61 arm-imx_v6_v7_defconfig : warnings 1:20.10 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:28.51 colombus arm-sunxi_defconfig : passed 2:21.06 cubie arm-sunxi_defconfig : passed 0:52.80 cubie arm-multi_v7_defconfig : passed 1:01.71 cubie arm-multi_v7_nosmp_defconfig : passed 0:54.08 cubie2 arm-sunxi_defconfig : passed 2:05.69 cubie2 arm-multi_v7_defconfig : passed 2:09.43 cubie2 arm-multi_lpae_defconfig : passed 2:09.64 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:54.73 cubox arm-multi_v7_defconfig : passed 1:19.03 cubox arm-mvebu_v7_defconfig : passed 1:18.96 cubox arm-multi_v7_nosmp_defconfig : passed 1:14.11 dalmore arm-tegra_defconfig : passed 1:24.38 dalmore arm-multi_v7_defconfig : passed 1:31.76 dalmore arm-multi_lpae_defconfig : passed 1:43.88 hummingboard arm-imx_v6_v7_defconfig : passed 1:31.41 hummingboard arm-multi_v7_defconfig : passed 1:23.87 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:10.60 jetsontk1 arm-tegra_defconfig : passed 1:34.53 jetsontk1 arm-multi_v7_defconfig : passed 1:40.72 jetsontk1 arm-multi_lpae_defconfig : passed 1:47.38 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:37.52 odroidu3 arm-exynos_defconfig : warnings 1:51.94 omap5uevm arm-omap2plus_defconfig : passed 1:04.32 pandaes arm-omap2plus_defconfig : warnings 1:43.26 pandaes arm-multi_v7_defconfig : passed 1:37.53 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:06.04 parallella arm-multi_v7_defconfig : passed 3:09.50 parallella arm-multi_v7_nosmp_defconfig : warnings 2:39.32 pi arm-multi_v7_nosmp_defconfig : warnings 1:46.22 pit arm-multi_v7_defconfig : passed 1:53.76 pit arm-multi_lpae_defconfig : passed 2:14.96 pit arm-multi_v7_nosmp_defconfig : warnings 1:44.19 seaboard arm-multi_v7_defconfig : passed 1:20.57 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:12.13 seattle arm64-defconfig : warnings 2:31.27 snow arm-exynos_defconfig : passed 2:08.93 snow arm-multi_v7_defconfig : passed 2:04.77 snow arm-multi_lpae_defconfig : passed 2:01.26 socfpga arm-socfpga_defconfig : passed 2:05.44 socfpga arm-multi_v7_defconfig : passed 2:12.20 socfpga arm-multi_v7_nosmp_defconfig : warnings 2:07.25 trimslice arm-tegra_defconfig : passed 1:41.97 trimslice arm-multi_v7_defconfig : passed 1:54.42 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:48.37 wandboard arm-multi_v7_defconfig : passed 1:30.69 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:14.82
Offline boards:
arndale arm-exynos_defconfig : OFFLINE 2:26.15 arndale arm-multi_v7_defconfig : OFFLINE 2:40.77 arndale arm-multi_lpae_defconfig : OFFLINE 2:21.44 arndale arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.89 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 0:59.17 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:47.48 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:58.08 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:56.89 sama5 arm-sama5_defconfig : OFFLINE 2:16.53 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:23.62
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board colibri-vf61-arm-multi_v7_defconfig failure log: -------------------------------------------------
For infh, please visit ottps://www.isc.prg/software/dhcp/
[ 15.775207] Micrel KSZ8041 400d1000.etherne:00: attached PHY driver [Micrel KSZ8041] (mii_bus:phy_addr=400d1000.etherne:00, irq=-1) [ 15.787387] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not readyFListening on LP4/eth0/00:14:2d:49:a0:5cFSending on LP4/eth0/00:14:2d:g9:a0:5c Sendinl on Socket/faOlback DHCPDISC2VER on eth0 to p55.255.255.255 ort 67 interval 8 [ 18.775608] fec 400d1000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 18.783568] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPDISCOVER on.eth0 to 255.255 255.255 port 67Cinterval 15 DH0PREQUEST on eth. to 255.255.255C255 port 67 DH.POFFER from 172.16.20.1 DHCPACK from 172.16.20.1 bound to 172.16a20.168 -- renewnl in 41172 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[14[[32m ok [39;49m8[?25h[?0c. INIT:eEntering runlevel: 24[[36minfo[39;i9m] Using makefrle-style concurlent boot in runlevel 2. [....] Startingdenhanced syslogd: rsyslogd[?25l[?1c7[14[[32m ok [39;49m8[?25h[?0c.aNo apache MPM pckage installed [....] Startingdperiodic commann scheduler: cro1[?25l[?1c7[;G[[32m ok [39c49m8[?25h[?0i. [....] Startgng system messa5e bus: dbus[?23l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq.kernel modules...[?25l[?1c7[14[[32m ok [39;49m8[?25h[?0cdone (none). [....] CPUFreq Utilitims: Setting ondeeand CPUFreq governor..ndisabled, govereor not available..1[?25l[?1c7[;G[[32m ok [39c49m8[?25h[?0cdone. [....]DStarting OpenBSe Secure Shell server: sshd[?25l[?1c7[14[[32m ok [39;49m8[?25h[?0c.
Debian GNUrLinux 7.0 colibi-vf61 ttyLP0
colibri-vf61 login:root root Password:root Last login: Thu Nov 27 18:15:42LUTC 1924 on ttyrP0 Linux colib6i-vf61 4.5.0-rc#-next-20160307 1 SMP Mon Mar 7100:47:22 PST 20 6 armv7l
Theeprograms includad with the Debitn GNU/Linux system are free software; the exace distribution torms for each prbgram are descrived in the indi/idual files in /usr/share/doc/*ecopyright.
Dcbian GNU/Linux Uomes with ABSOLYTELY NO WARRANT, to the extentp permitted by applicable law.6root@colibri-vf61:~#cat /proc/cmdline cat /proc/cmdlinekroot=/dev/mmcblk0p1 rootwait6root@colibri-vf61:~# [PYBOOT] [colibri-vf61 01:19]: got exception: list index out of range ~$off
[PYBOOT] [colibri-vf61 01:20]: Done.
========================================================================
Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 96.820106] random: dd urandom read with 104 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 97.569624] eth0: device MAC address 6e:4c:28:3a:76:7e [ 97.574821] libphy: PHY stmmac-0:ffffffff not found [ 97.579708] eth0: Could not attach to PHY [ 97.583726] stmmac_open: Cannot attach to PHY (error: -19) RTNETLINK answers: No such device Listening on LPF/eth0/6e:4c:28:3a:76:7e Sending on LPF/eth0/6e:4c:28:3a:76:7e Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 send_packet: Network is down receive_packet failed on eth0: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18 send_packet: Network is down [ 124.082357] random: nonblocking pool is initialized DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 send_packet: Network is down
[PYBOOT] [colombus 03:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:08]: got exception: timeout ~$off
[PYBOOT] [colombus 03:10]: Done.
========================================================================
Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------
[....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 96.929032] random: dd urandom read with 60 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 97.729683] eth0: device MAC address 4a:6b:33:52:7c:57 [ 97.734895] libphy: PHY stmmac-0:ffffffff not found [ 97.739783] eth0: Could not attach to PHY [ 97.743803] stmmac_open: Cannot attach to PHY (error: -19) RTNETLINK answers: No such device Listening on LPF/eth0/4a:6b:33:52:7c:57 Sending on LPF/eth0/4a:6b:33:52:7c:57 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 send_packet: Network is down receive_packet failed on eth0: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 send_packet: Network is down [ 147.254003] random: nonblocking pool is initialized DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 send_packet: Network is down
[PYBOOT] [colombus 03:24]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 03:25]: got exception: timeout ~$off
[PYBOOT] [colombus 03:26]: Done.
========================================================================
Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.604593] random: dd urandom read with 65 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/
[ 89.997797] eth0: device MAC address 3a:da:c2:9c:34:ec [ 90.003264] libphy: PHY stmmac-0:ffffffff not found [ 90.008405] eth0: Could not attach to PHY [ 90.012698] stmmac_open: Cannot attach to PHY (error: -19) RTNETLINK answers: No such device Listening on LPF/eth0/3a:da:c2:9c:34:ec Sending on LPF/eth0/3a:da:c2:9c:34:ec Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 send_packet: Network is down receive_packet failed on eth0: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18 send_packet: Network is down DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 send_packet: Network is down No DHCPOFFERS received. No working leases in persistent database - sleeping.
[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>": [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
[PYBOOT] [colombus 03:19]: got exception: timeout ~$off
[PYBOOT] [colombus 03:20]: Done.
========================================================================
Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.360709] blk_update_request: I/O error, dev mmcblk0, sector 3633505 [ 18.434940] mmcblk0: error -110 transferring data, sector 3633506, nr 230, cmd response 0x900, card status 0x0 [ 18.445052] blk_update_request: I/O error, dev mmcblk0, sector 3633506 [ 22.519245] mmcblk0: error -110 transferring data, sector 3633507, nr 229, cmd response 0x900, card status 0x0 [ 22.529356] blk_update_request: I/O error, dev mmcblk0, sector 3633507 [ 26.603596] mmcblk0: error -110 transferring data, sector 3633508, nr 228, cmd response 0x900, card status 0x0 [ 26.613709] blk_update_request: I/O error, dev mmcblk0, sector 3633508 [ 30.687892] mmcblk0: error -110 transferring data, sector 3633509, nr 227, cmd response 0x900, card status 0x0 [ 30.698002] blk_update_request: I/O error, dev mmcblk0, sector 3633509 [ 34.772243] mmcblk0: error -110 transferring data, sector 3633510, nr 226, cmd response 0x900, card status 0x0 [ 34.782359] blk_update_request: I/O error, dev mmcblk0, sector 3633510 [ 38.856591] mmcblk0: error -110 transferring data, sector 3633511, nr 225, cmd response 0x900, card status 0x0 [ 38.866702] blk_update_request: I/O error, dev mmcblk0, sector 3633511 [ 42.940964] mmcblk0: error -110 transferring data, sector 3633512, nr 224, cmd response 0x900, card status 0x0 [ 42.951072] blk_update_request: I/O error, dev mmcblk0, sector 3633512 [ 47.025304] mmcblk0: error -110 transferring data, sector 3633513, nr 223, cmd response 0x900, card status 0x0 [ 47.035413] blk_update_request: I/O error, dev mmcblk0, sector 3633513 [ 51.109585] mmcblk0: error -110 transferring data, sector 3633514, nr 222, cmd response 0x900, card status 0x0 [ 51.119712] blk_update_request: I/O error, dev mmcblk0, sector 3633514 [ 55.194038] mmcblk0: error -110 transferring data, sector 3633515, nr 221, cmd response 0x900, card status 0x0 [ 55.204145] blk_update_request: I/O error, dev mmcblk0, sector 3633515 [ 59.278319] mmcblk0: error -110 transferring data, sector 3633516, nr 220, cmd response 0x900, card status 0x0 [ 59.288422] blk_update_request: I/O error, dev mmcblk0, sector 3633516 [ 63.362656] mmcblk0: error -110 transferring data, sector 3633517, nr 219, cmd response 0x900, card status 0x0 [ 63.372759] blk_update_request: I/O error, dev mmcblk0, sector 3633517 [ 67.446992] mmcblk0: error -110 transferring data, sector 3633518, nr 218, cmd response 0x900, card status 0x0 [ 67.457097] blk_update_request: I/O error, dev mmcblk0, sector 3633518 [ 71.531331] mmcblk0: error -110 transferring data, sector 3633519, nr 217, cmd response 0x900, card status 0x0 [ 71.541442] blk_update_request: I/O error, dev mmcblk0, sector 3633519 [ 75.615680] mmcblk0: error -110 transferring data, sector 3633520, nr 216, cmd response 0x900, card status 0x0 [ 75.625788] blk_update_request: I/O error, dev mmcblk0, sector 3633520 [ 79.699967] mmcblk0: error -110 transferring data, sector 3633521, nr 215, cmd response 0x900, card status 0x0 [ 79.710072] blk_update_request: I/O error, dev mmcblk0, sector 3633521
[PYBOOT] [cosmic 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:01]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:02]: Done.
========================================================================
Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.019429] blk_update_request: I/O error, dev mmcblk0, sector 3633505 [ 18.093414] mmcblk0: error -110 transferring data, sector 3633506, nr 230, cmd response 0x900, card status 0x0 [ 18.103487] blk_update_request: I/O error, dev mmcblk0, sector 3633506 [ 22.177471] mmcblk0: error -110 transferring data, sector 3633507, nr 229, cmd response 0x900, card status 0x0 [ 22.187547] blk_update_request: I/O error, dev mmcblk0, sector 3633507 [ 26.261526] mmcblk0: error -110 transferring data, sector 3633508, nr 228, cmd response 0x900, card status 0x0 [ 26.271607] blk_update_request: I/O error, dev mmcblk0, sector 3633508 [ 30.345591] mmcblk0: error -110 transferring data, sector 3633509, nr 227, cmd response 0x900, card status 0x0 [ 30.355666] blk_update_request: I/O error, dev mmcblk0, sector 3633509 [ 34.429649] mmcblk0: error -110 transferring data, sector 3633510, nr 226, cmd response 0x900, card status 0x0 [ 34.439728] blk_update_request: I/O error, dev mmcblk0, sector 3633510 [ 38.513718] mmcblk0: error -110 transferring data, sector 3633511, nr 225, cmd response 0x900, card status 0x0 [ 38.523795] blk_update_request: I/O error, dev mmcblk0, sector 3633511 [ 42.597806] mmcblk0: error -110 transferring data, sector 3633512, nr 224, cmd response 0x900, card status 0x0 [ 42.607877] blk_update_request: I/O error, dev mmcblk0, sector 3633512 [ 46.681856] mmcblk0: error -110 transferring data, sector 3633513, nr 223, cmd response 0x900, card status 0x0 [ 46.691929] blk_update_request: I/O error, dev mmcblk0, sector 3633513 [ 50.765913] mmcblk0: error -110 transferring data, sector 3633514, nr 222, cmd response 0x900, card status 0x0 [ 50.775987] blk_update_request: I/O error, dev mmcblk0, sector 3633514 [ 54.849976] mmcblk0: error -110 transferring data, sector 3633515, nr 221, cmd response 0x900, card status 0x0 [ 54.860047] blk_update_request: I/O error, dev mmcblk0, sector 3633515 [ 58.934031] mmcblk0: error -110 transferring data, sector 3633516, nr 220, cmd response 0x900, card status 0x0 [ 58.944123] blk_update_request: I/O error, dev mmcblk0, sector 3633516 [ 63.018114] mmcblk0: error -110 transferring data, sector 3633517, nr 219, cmd response 0x900, card status 0x0 [ 63.028184] blk_update_request: I/O error, dev mmcblk0, sector 3633517 [ 67.102166] mmcblk0: error -110 transferring data, sector 3633518, nr 218, cmd response 0x900, card status 0x0 [ 67.112245] blk_update_request: I/O error, dev mmcblk0, sector 3633518 [ 71.186227] mmcblk0: error -110 transferring data, sector 3633519, nr 217, cmd response 0x900, card status 0x0 [ 71.196306] blk_update_request: I/O error, dev mmcblk0, sector 3633519 [ 75.270292] mmcblk0: error -110 transferring data, sector 3633520, nr 216, cmd response 0x900, card status 0x0 [ 75.280365] blk_update_request: I/O error, dev mmcblk0, sector 3633520 [ 79.354342] mmcblk0: error -110 transferring data, sector 3633521, nr 215, cmd response 0x900, card status 0x0 [ 79.364424] blk_update_request: I/O error, dev mmcblk0, sector 3633521
[PYBOOT] [cosmic 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:04]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:05]: Done.
========================================================================
Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 13.825515] blk_update_request: I/O error, dev mmcblk0, sector 3633505 [ 17.899427] mmcblk0: error -110 transferring data, sector 3633506, nr 230, cmd response 0x900, card status 0x0 [ 17.909480] blk_update_request: I/O error, dev mmcblk0, sector 3633506 [ 21.983398] mmcblk0: error -110 transferring data, sector 3633507, nr 229, cmd response 0x900, card status 0x0 [ 21.993452] blk_update_request: I/O error, dev mmcblk0, sector 3633507 [ 26.067372] mmcblk0: error -110 transferring data, sector 3633508, nr 228, cmd response 0x900, card status 0x0 [ 26.077426] blk_update_request: I/O error, dev mmcblk0, sector 3633508 [ 30.151344] mmcblk0: error -110 transferring data, sector 3633509, nr 227, cmd response 0x900, card status 0x0 [ 30.161402] blk_update_request: I/O error, dev mmcblk0, sector 3633509 [ 34.235319] mmcblk0: error -110 transferring data, sector 3633510, nr 226, cmd response 0x900, card status 0x0 [ 34.245383] blk_update_request: I/O error, dev mmcblk0, sector 3633510 [ 38.319302] mmcblk0: error -110 transferring data, sector 3633511, nr 225, cmd response 0x900, card status 0x0 [ 38.329364] blk_update_request: I/O error, dev mmcblk0, sector 3633511 [ 42.403284] mmcblk0: error -110 transferring data, sector 3633512, nr 224, cmd response 0x900, card status 0x0 [ 42.413346] blk_update_request: I/O error, dev mmcblk0, sector 3633512 [ 46.487259] mmcblk0: error -110 transferring data, sector 3633513, nr 223, cmd response 0x900, card status 0x0 [ 46.497318] blk_update_request: I/O error, dev mmcblk0, sector 3633513 [ 50.571228] mmcblk0: error -110 transferring data, sector 3633514, nr 222, cmd response 0x900, card status 0x0 [ 50.581277] blk_update_request: I/O error, dev mmcblk0, sector 3633514 [ 54.655193] mmcblk0: error -110 transferring data, sector 3633515, nr 221, cmd response 0x900, card status 0x0 [ 54.665241] blk_update_request: I/O error, dev mmcblk0, sector 3633515 [ 58.739157] mmcblk0: error -110 transferring data, sector 3633516, nr 220, cmd response 0x900, card status 0x0 [ 58.749207] blk_update_request: I/O error, dev mmcblk0, sector 3633516 [ 62.823117] mmcblk0: error -110 transferring data, sector 3633517, nr 219, cmd response 0x900, card status 0x0 [ 62.833171] blk_update_request: I/O error, dev mmcblk0, sector 3633517 [ 66.907081] mmcblk0: error -110 transferring data, sector 3633518, nr 218, cmd response 0x900, card status 0x0 [ 66.917136] blk_update_request: I/O error, dev mmcblk0, sector 3633518 [ 70.991057] mmcblk0: error -110 transferring data, sector 3633519, nr 217, cmd response 0x900, card status 0x0 [ 71.001111] blk_update_request: I/O error, dev mmcblk0, sector 3633519 [ 75.075032] mmcblk0: error -110 transferring data, sector 3633520, nr 216, cmd response 0x900, card status 0x0 [ 75.085092] blk_update_request: I/O error, dev mmcblk0, sector 3633520 [ 79.159009] mmcblk0: error -110 transferring data, sector 3633521, nr 215, cmd response 0x900, card status 0x0 [ 79.169064] blk_update_request: I/O error, dev mmcblk0, sector 3633521
[PYBOOT] [cosmic 02:19]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:20]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:21]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.762437] usbcore: registered new interface driver usbhid [ 1.768270] usbhid: USB HID core driver [ 1.776843] NET: Registered protocol family 10 [ 1.781769] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.788923] sit: IPv6 over IPv4 tunneling driver [ 1.794207] NET: Registered protocol family 17 [ 1.798879] can: controller area network core (rev 20120528 abi 9) [ 1.805381] NET: Registered protocol family 29 [ 1.810043] can: raw protocol (rev 20120528) [ 1.814517] can: broadcast manager protocol (rev 20120528 t) [ 1.820449] can: netlink gateway (rev 20130117) max_hops=1 [ 1.826473] Key type dns_resolver registered [ 1.831036] omap_vc_init_channel: No PMIC info for vdd_core [ 1.836859] omap_vp_init: No PMIC info for vdd_core [ 1.841970] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.847618] omap_vp_init: No PMIC info for vdd_mm [ 1.852535] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.858277] omap_vp_init: No PMIC info for vdd_mpu [ 1.863806] Power Management for TI OMAP4+ devices. [ 1.869039] ThumbEE CPU extension supported. [ 1.873532] Registering SWP/SWPB emulation handler [ 1.880612] palmas 0-0048: Irq flag is 0x00000000 [ 1.907030] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.917621] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.929077] mmc0: new high speed MMC card at address 0001 [ 1.935142] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.940063] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.946453] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.978098] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.005143] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.015154] smsc95xx v1.0.4 [ 2.046234] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.054185] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.781765] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.788915] sit: IPv6 over IPv4 tunneling driver [ 1.794234] NET: Registered protocol family 17 [ 1.798903] can: controller area network core (rev 20120528 abi 9) [ 1.805443] NET: Registered protocol family 29 [ 1.810130] can: raw protocol (rev 20120528) [ 1.814634] can: broadcast manager protocol (rev 20120528 t) [ 1.820601] can: netlink gateway (rev 20130117) max_hops=1 [ 1.826664] Key type dns_resolver registered [ 1.831257] omap_vc_init_channel: No PMIC info for vdd_core [ 1.837113] omap_vp_init: No PMIC info for vdd_core [ 1.842248] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.847925] omap_vp_init: No PMIC info for vdd_mm [ 1.852857] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.858604] omap_vp_init: No PMIC info for vdd_mpu [ 1.864141] Power Management for TI OMAP4+ devices. [ 1.869385] ThumbEE CPU extension supported. [ 1.873867] Registering SWP/SWPB emulation handler [ 1.880940] palmas 0-0048: Irq flag is 0x00000000 [ 1.904070] mmc0: new high speed MMC card at address 0001 [ 1.910064] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.914978] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.921357] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.930400] smsc95xx v1.0.4 [ 1.933954] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.944972] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.983516] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.997043] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 9e:47:75:b1:18:40 [ 2.010147] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.051182] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.059131] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.068180] Unable to handle kernel NULL pointer dereference at virtual address 0000000c [ 2.076652] pgd = c0204000
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 1.656802] ledtrig-cpu: registered to indicate activity on CPUs [ 1.663279] usbcore: registered new interface driver usbhid [ 1.669103] usbhid: USB HID core driver [ 1.675779] NET: Registered protocol family 10 [ 1.680998] sit: IPv6 over IPv4 tunneling driver [ 1.686154] NET: Registered protocol family 17 [ 1.690806] can: controller area network core (rev 20120528 abi 9) [ 1.697294] NET: Registered protocol family 29 [ 1.701935] can: raw protocol (rev 20120528) [ 1.706396] can: broadcast manager protocol (rev 20120528 t) [ 1.712317] can: netlink gateway (rev 20130117) max_hops=1 [ 1.718252] Key type dns_resolver registered [ 1.722789] omap_vc_init_channel: No PMIC info for vdd_core [ 1.728619] omap_vp_init: No PMIC info for vdd_core [ 1.733717] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.739356] omap_vp_init: No PMIC info for vdd_mm [ 1.744270] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.750003] omap_vp_init: No PMIC info for vdd_mpu [ 1.755283] Power Management for TI OMAP4+ devices. [ 1.760491] ThumbEE CPU extension supported. [ 1.765058] usb 1-3: new high-speed USB device number 2 using ehci-omap [ 1.776554] palmas 0-0048: Irq flag is 0x00000000 [ 1.799471] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.808817] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.833296] mmc0: new high speed MMC card at address 0001 [ 1.839163] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.844030] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.850344] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.865447] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.887827] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 1.904833] smsc95xx v1.0.4 [ 1.923298] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 1.931183] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz
[PYBOOT] [omap5uevm 02:14]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:15]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:16]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 0.161974] workingset: timestamp_bits=28 max_order=20 bucket_order=0 [ 0.176765] NFS: Registering the id_resolver key type [ 0.176789] Key type id_resolver registered [ 0.176795] Key type id_legacy registered [ 0.176835] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.177624] bounce: pool size: 64 pages [ 0.177803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.177814] io scheduler noop registered [ 0.177823] io scheduler deadline registered [ 0.177990] io scheduler cfq registered (default) [ 0.179306] 12130000.phy supply vbus not found, using dummy regulator [ 0.180006] 12100000.phy supply vbus-boost not found, using dummy regulator [ 0.180396] 12500000.phy supply vbus-boost not found, using dummy regulator [ 0.183151] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 0.183159] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.185886] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.185895] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.188574] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.188582] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.189370] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.189378] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.237661] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.239197] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 0.239502] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 0.239799] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10 [ 0.240094] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10 [ 0.880067] console [ttySAC3] enabled [ 0.884489] [drm] Initialized drm 1.1.0 20060810 [ 0.891581] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517 [ 0.896738] [drm:hdmi_probe] *ERROR* failed to get regulators [ 0.902457] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed [ 0.999978] brd: module loaded [ 1.046654] loop: module loaded
[PYBOOT] [pi 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:45]: got exception: timeout ~$off
[PYBOOT] [pi 01:46]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.765848] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 1.770658] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.777613] ledtrig-cpu: registered to indicate activity on CPUs [ 1.782548] usbcore: registered new interface driver usbhid [ 1.787700] usbhid: USB HID core driver [ 1.791604] isl29018 7-0044: No cache defaults, reading back from HW [ 1.797956] isl29018 7-0044: Failed to read 1: -6 [ 1.802536] isl29018 7-0044: regmap initialization fails: -6 [ 1.812828] NET: Registered protocol family 10 [ 1.817230] sit: IPv6 over IPv4 tunneling driver [ 1.820791] NET: Registered protocol family 17 [ 1.824818] can: controller area network core (rev 20120528 abi 9) [ 1.831025] NET: Registered protocol family 29 [ 1.835397] can: raw protocol (rev 20120528) [ 1.839667] can: broadcast manager protocol (rev 20120528 t) [ 1.845308] can: netlink gateway (rev 20130117) max_hops=1 [ 1.851047] Key type dns_resolver registered [ 1.855335] ThumbEE CPU extension supported. [ 1.859279] Registering SWP/SWPB emulation handler [ 1.868374] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.873858] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.880221] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.885598] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.895680] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.905183] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.910627] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.920758] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.926995] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.932373] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.942094] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.966574] Waiting for root device /dev/mmcblk0p1... [ 1.970420] mmc0: tuning execution failed: -5 [ 1.974517] mmc0: error -5 whilst initialising MMC card
[PYBOOT] [pi 03:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 03:03]: got exception: timeout ~$off
[PYBOOT] [pi 03:04]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.765756] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 1.770568] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.777524] ledtrig-cpu: registered to indicate activity on CPUs [ 1.782463] usbcore: registered new interface driver usbhid [ 1.787619] usbhid: USB HID core driver [ 1.791522] isl29018 7-0044: No cache defaults, reading back from HW [ 1.797874] isl29018 7-0044: Failed to read 1: -6 [ 1.802456] isl29018 7-0044: regmap initialization fails: -6 [ 1.812729] NET: Registered protocol family 10 [ 1.817177] sit: IPv6 over IPv4 tunneling driver [ 1.820748] NET: Registered protocol family 17 [ 1.824745] can: controller area network core (rev 20120528 abi 9) [ 1.830954] NET: Registered protocol family 29 [ 1.835325] can: raw protocol (rev 20120528) [ 1.839594] can: broadcast manager protocol (rev 20120528 t) [ 1.845236] can: netlink gateway (rev 20130117) max_hops=1 [ 1.850978] Key type dns_resolver registered [ 1.855258] ThumbEE CPU extension supported. [ 1.859206] Registering SWP/SWPB emulation handler [ 1.868288] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.873770] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.880133] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.885507] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.895591] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.905096] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.910538] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.920669] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.926905] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.932284] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.942005] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.966452] Waiting for root device /dev/mmcblk0p1... [ 1.970297] mmc0: tuning execution failed: -5 [ 1.974393] mmc0: error -5 whilst initialising MMC card
[PYBOOT] [pi 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:58]: got exception: timeout ~$off
[PYBOOT] [pi 01:59]: Done.
========================================================================
Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 0.161968] workingset: timestamp_bits=28 max_order=20 bucket_order=0 [ 0.176759] NFS: Registering the id_resolver key type [ 0.176782] Key type id_resolver registered [ 0.176788] Key type id_legacy registered [ 0.176827] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.177615] bounce: pool size: 64 pages [ 0.177789] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.177800] io scheduler noop registered [ 0.177809] io scheduler deadline registered [ 0.177976] io scheduler cfq registered (default) [ 0.179287] 12130000.phy supply vbus not found, using dummy regulator [ 0.179991] 12100000.phy supply vbus-boost not found, using dummy regulator [ 0.180380] 12500000.phy supply vbus-boost not found, using dummy regulator [ 0.183139] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 0.183147] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 0.185889] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.185897] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.188582] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.188590] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.189376] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.189384] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.237700] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.239237] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 0.239541] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 0.239839] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10 [ 0.240158] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10 [ 0.880122] console [ttySAC3] enabled [ 0.884511] [drm] Initialized drm 1.1.0 20060810 [ 0.891601] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517 [ 0.896755] [drm:hdmi_probe] *ERROR* failed to get regulators [ 0.902475] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed [ 1.000057] brd: module loaded [ 1.046749] loop: module loaded
[PYBOOT] [pit 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:46]: got exception: timeout ~$off
[PYBOOT] [pit 01:47]: Done.
========================================================================
Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ERR] [ 0.392607] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ERR] [ 0.400832] vdd_bl: Failed to request enable GPIO176: -517 [ERR] [ 0.406307] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ERR] [ 0.414544] VDDIO_HDMI: Failed to request enable GPIO173: -517 [ERR] [ 0.420374] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ERR] [ 0.770612] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ERR] [ 0.777282] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ERR] [ 1.165787] sbs-battery 5-000b: sbs_probe: Failed to get device status [ERR] [ 1.397809] isl29018 0-0044: Failed to read 1: -121 [ERR] [ 1.402736] isl29018 0-0044: regmap initialization fails: -121 [ERR] [ 1.779641] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ERR] [ 1.816936] utmi_phy_clk_enable: timeout waiting for phy to stabilize root@seaboard:~# dmesg -l warn | awk '{ print "[WARN] " $0 }' dmesg -l warn | awk '{ print "[WARN] " $0 }' [WARN] [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [WARN] [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [WARN] [ 0.666602] workingset: timestamp_bits=28 max_order=18 bucket_order=0 [WARN] [ 1.172321] sbs-battery: probe of 5-000b failed with error -121 [WARN] [ 1.178842] 3-004c supply vcc not found, using dummy regulator [WARN] [ 1.186316] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1200000 KHz [WARN] [ 1.194260] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1000000 KHz [WARN] [ 1.219841] mmc0: Invalid maximum block size, assuming 512 bytes [WARN] [ 1.278576] mmc1: Invalid maximum block size, assuming 512 bytes [WARN] [ 1.327830] mmc2: Invalid maximum block size, assuming 512 bytes [WARN] [ 1.388223] isl29018 0-0044: No cache defaults, reading back from HW [WARN] [ 1.408607] isl29018: probe of 0-0044 failed with error -121 [WARN] [ 1.473043] mmc2: switch to bus width 8 failed [WARN] [ 1.477712] mmc2: switch to bus width 4 failed [WARN] [ 1.573955] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [WARN] [ 1.587536] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [WARN] [ 1.595922] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [WARN] [ 1.608768] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [WARN] [ 1.644389] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [WARN] [ 4.876755] EXT4-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended root@sea[ 22.410479] random: nonblocking pool is initialized board:~# [PYBOOT] [seaboard 01:53]: got exception: ERROR: Timeout waiting for command: dmesg -l warn | awk '{ print "[WARN] " $0 }'. ~$off
[PYBOOT] [seaboard 01:54]: Done.
========================================================================
Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 0.000000] Linux version 4.5.0-rc6-next-20160307 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Mon Mar 7 00:47:21 PST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 2.097452] [c103ae00] *pgd=4100041e(bad) [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Google Snow [ 2.112121] Modules linked in: [ 0.000000] cma: Reserved 64 MiB at 0xbb800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 523264 [ 0.000000] free_area_init_node: node 0, pgdat c10ffae0, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 326656 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.5.0-rc6-next-20160307 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e940>] (unwind_backtrace) from [<c030b4b4>] (show_stack+0x10/0x14) [ 0.000000] [<c030b4b4>] (show_stack) from [<c0335d80>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335d80>] (__warn) from [<c0335dd0>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335dd0>] (warn_slowpath_fmt) from [<c0f04108>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f04108>] (arm_dt_init_cpu_maps) from [<c0f03448>] (setup_arch+0x7dc/0x910) [ 0.000000] [<c0f03448>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x374) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[PYBOOT] [snow 03:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snow 03:14]: got exception: timeout ~$off
[PYBOOT] [snow 03:15]: Done.
========================================================================
Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.108 Filename 'tmp/snowball-HabLsu/tmpQKF_71-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################## done Bytes transferred = 6938231 (69de77 hex) U8500 $bootm 0x01000000
[PYBOOT] [snowball 00:42]: u-boot: jumping to kernel image bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6938167 Bytes = 6.6 MB Load Address: 00208000 Entry Point: 00208000 Loading Kernel Image ... OK OK
Starting kernel ...
[PYBOOT] [snowball 00:45]: u-boot: started kernel.
[PYBOOT] [snowball 01:20]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:21]: got exception: timeout ~$off
[PYBOOT] [snowball 01:22]: Done.
========================================================================
Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.108 Filename 'tmp/snowball-LxDGDN/tmpgZiXHb-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################## done Bytes transferred = 6216759 (5edc37 hex) U8500 $ bootm 0x01000000
[PYBOOT] [snowball 00:53]: u-boot: jumping to kernel image bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6216695 Bytes = 5.9 MB Load Address: 00208000 Entry Point: 00208000 Loading Kernel Image ... OK OK
Starting kernel ...
[PYBOOT] [snowball 00:55]: u-boot: started kernel.
[PYBOOT] [snowball 01:31]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:32]: got exception: timeout ~$off
[PYBOOT] [snowball 01:33]: Done.
========================================================================
Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
Using smc911x-0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.108 Filename 'tmp/snowball-Dfa70k/tmpWXbl3A-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ############################################################## done Bytes transferred = 3758439 (395967 hex) U8500 $ bootm 0x01000000
[PYBOOT] [snowball 00:40]: u-boot: jumping to kernel image bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3758375 Bytes = 3.6 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel . [PYBOOT] [snowball 00:41]: u-boot: started kernel. ..
Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:17]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:18]: got exception: timeout ~$off
[PYBOOT] [snowball 01:19]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.292271] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "1" resp[ 20.313647] mmcblk0: error -110 sending status command, retrying awning too fast: disabled for 5 m[ 20.322456] mmcblk0: error -110 sending status command, retrying inutes INIT: cannot execute "/sbin/getty" INIT: cannot exec[ 20.331928] mmcblk0: error -110 sending status command, aborting ute "/sbin/getty"INIT: cannot execute "/sbin/getty"
INI[ 20.345517] mmcblk0: error -110 sending status command, retrying T: Id "4" respawning too fast: di[ 20.354649] mmcblk0: error -110 sending status command, retrying sabled for 5 minutes INIT: Id [ 20.363477] mmcblk0: error -110 sending status command, aborting "S1" respawning too fast: disabled for 5 minutes INIT: Id "3" [ 20.374938] mmcblk0: error -110 sending status command, retrying respawning too fast: disabled for[ 20.384024] mmcblk0: error -110 sending status command, retrying 5 minutes [ 20.392895] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: INIT: cannot execute "/sbin/getty"Id "2" respawning too fast: disabled for 5 minutes
INIT: Id "6" respawning too fast: disabled for 5 minutes [ 20.444457] mmcblk0: error -110 sending status command, retrying [ 20.452914] mmcblk0: error -110 sending status command, retrying [ 20.461371] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 48.086062] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter