next/master boot: 175 boots: 18 failed, 143 passed with 10 offline, 1 untried/unknown, 3 conflicts (next-20181211)
next/master boot: 175 boots: 18 failed, 143 passed with 10 offline, 1 untried/unknown, 3 conflicts (next-20181211)
Full Boot Summary: https://kernelci.org/boot/all/job/next/branch/master/kernel/next-20181211/ Full Build Summary: https://kernelci.org/build/next/branch/master/kernel/next-20181211/
Tree: next Branch: master Git Describe: next-20181211 Git Commit: 60bec71b5acb0b469d07e73a348f6610236ae7fa Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Tested: 64 unique boards, 23 SoC families, 17 builds out of 223
Boot Regressions Detected:
arm:
multi_v7_defconfig: exynos5800-peach-pi: lab-baylibre-seattle: failing since 7 days (last pass: next-20181130 - first fail: next-20181203) tegra124-jetson-tk1: lab-baylibre: new failure (last pass: next-20181210)
arm64:
defconfig: hip07-d05: lab-collabora: new failure (last pass: next-20181210) rk3399-firefly: lab-baylibre-seattle: failing since 1 day (last pass: next-20181207 - first fail: next-20181210)
defconfig+CONFIG_CPU_BIG_ENDIAN=y: apq8016-sbc: lab-baylibre-seattle: failing since 1 day (last pass: next-20181207 - first fail: next-20181210) juno-r2: lab-baylibre-seattle: failing since 1 day (last pass: next-20181207 - first fail: next-20181210) meson-gxbb-nanopi-k2: lab-baylibre: failing since 1 day (last pass: next-20181206 - first fail: next-20181210) meson-gxbb-odroidc2: lab-baylibre-seattle: failing since 1 day (last pass: next-20181207 - first fail: next-20181210) meson-gxbb-p200: lab-baylibre-seattle: failing since 1 day (last pass: next-20181207 - first fail: next-20181210) lab-baylibre: failing since 1 day (last pass: next-20181206 - first fail: next-20181210) meson-gxl-s905x-khadas-vim: lab-baylibre-seattle: failing since 1 day (last pass: next-20181207 - first fail: next-20181210) lab-baylibre: failing since 1 day (last pass: next-20181206 - first fail: next-20181210) meson-gxl-s905x-libretech-cc: lab-baylibre: failing since 1 day (last pass: next-20181206 - first fail: next-20181210) meson-gxl-s905x-nexbox-a95x: lab-baylibre-seattle: failing since 1 day (last pass: next-20181207 - first fail: next-20181210)
defconfig+CONFIG_RANDOMIZE_BASE=y: hip07-d05: lab-collabora: failing since 1 day (last pass: next-20181207 - first fail: next-20181210) meson-gxl-s905x-khadas-vim: lab-baylibre: new failure (last pass: next-20181210) rk3399-firefly: lab-baylibre-seattle: failing since 1 day (last pass: next-20181207 - first fail: next-20181210)
Boot Failures Detected:
arm:
multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y exynos4412-odroidx2: 1 failed lab
arm64:
defconfig+CONFIG_CPU_BIG_ENDIAN=y apq8016-sbc: 1 failed lab juno-r2: 1 failed lab meson-g12a-u200: 1 failed lab meson-gxbb-nanopi-k2: 1 failed lab meson-gxbb-odroidc2: 1 failed lab meson-gxbb-p200: 2 failed labs meson-gxl-s905x-khadas-vim: 2 failed labs meson-gxl-s905x-libretech-cc: 1 failed lab meson-gxl-s905x-nexbox-a95x: 1 failed lab
defconfig+CONFIG_RANDOMIZE_BASE=y hip07-d05: 1 failed lab mt7622-rfb1: 1 failed lab rk3399-firefly: 1 failed lab
defconfig hip07-d05: 1 failed lab mt7622-rfb1: 1 failed lab rk3399-firefly: 1 failed lab
Offline Platforms:
arm:
mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: armada-xp-openblocks-ax3-4: 1 offline lab
multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: armada-xp-openblocks-ax3-4: 1 offline lab
mvebu_v7_defconfig: armada-xp-openblocks-ax3-4: 1 offline lab
multi_v7_defconfig: armada-xp-openblocks-ax3-4: 1 offline lab stih410-b2120: 1 offline lab tegra30-beaver: 1 offline lab zynq-zc702: 1 offline lab
tegra_defconfig: tegra30-beaver: 1 offline lab
arm64:
defconfig+CONFIG_CPU_BIG_ENDIAN=y: meson-axg-s400: 1 offline lab
defconfig+CONFIG_RANDOMIZE_BASE=y: sun50i-a64-pine64-plus: 1 offline lab
Conflicting Boot Failures Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)
arm:
multi_v7_defconfig: tegra124-jetson-tk1: lab-collabora: PASS lab-mhart: PASS lab-baylibre: FAIL lab-baylibre-seattle: PASS exynos5800-peach-pi: lab-collabora: PASS lab-baylibre-seattle: FAIL
arm64:
defconfig+CONFIG_RANDOMIZE_BASE=y: meson-gxl-s905x-khadas-vim: lab-baylibre-seattle: PASS lab-baylibre: FAIL
--- For more info write to info@kernelci.org
On Tue, Dec 11, 2018 at 05:10:16AM -0800, kernelci.org bot wrote:
Today's -next fails to boot on D05:
defconfig: hip07-d05: lab-collabora: new failure (last pass: next-20181210)
It takes an oops during IPMI initialization:
09:51:45.224591 [ 87.646247] ipmi_si: Adding SMBIOS-specified bt state machine 09:51:45.242352 [ 87.652129] ipmi_si: Trying SMBIOS-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 09:51:45.242646 [ 87.661875] Unable to handle kernel paging request at virtual address ffff7dfffee000e4
...
09:51:45.429194 [ 87.845965] Call trace: 09:51:45.429426 [ 87.848400] logic_inb+0x80/0xb8 09:51:45.429640 [ 87.851620] port_inb+0x18/0x20 [ipmi_si] 09:51:45.443075 [ 87.855620] bt_detect+0x40/0x250 [ipmi_si] 09:51:45.443320 [ 87.859793] try_smi_init+0x1a8/0x868 [ipmi_si] 09:51:45.443539 [ 87.864313] init_ipmi_si+0x190/0x220 [ipmi_si]
...
09:51:45.479097 [ 87.910207] udevd[2569]: worker [2589] terminated by signal 11 (Segmentation fault) 09:51:45.501664 [ 87.917863] udevd[2569]: worker [2589] failed while handling '/devices/platform/dmi-ipmi-si.0'
Full details here, including bisection information and full logs:
https://kernelci.org/boot/id/5c0f88d259b514823d4925c0/
Unfortunately it looks like the bug has actually been around for a while but wasn't stopping us getting to a prompt:
https://storage.kernelci.org/next/master/next-20181210/arm64/defconfig/lab-c...
and it might still be some unrelated hang there.
On 11/12/2018 15:23, Mark Brown wrote:
On Tue, Dec 11, 2018 at 05:10:16AM -0800, kernelci.org bot wrote:
Today's -next fails to boot on D05:
defconfig: hip07-d05: lab-collabora: new failure (last pass: next-20181210)It takes an oops during IPMI initialization:
09:51:45.224591 [ 87.646247] ipmi_si: Adding SMBIOS-specified bt state machine 09:51:45.242352 [ 87.652129] ipmi_si: Trying SMBIOS-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 09:51:45.242646 [ 87.661875] Unable to handle kernel paging request at virtual address ffff7dfffee000e4
...
09:51:45.429194 [ 87.845965] Call trace: 09:51:45.429426 [ 87.848400] logic_inb+0x80/0xb8 09:51:45.429640 [ 87.851620] port_inb+0x18/0x20 [ipmi_si] 09:51:45.443075 [ 87.855620] bt_detect+0x40/0x250 [ipmi_si] 09:51:45.443320 [ 87.859793] try_smi_init+0x1a8/0x868 [ipmi_si] 09:51:45.443539 [ 87.864313] init_ipmi_si+0x190/0x220 [ipmi_si]
...
09:51:45.479097 [ 87.910207] udevd[2569]: worker [2589] terminated by signal 11 (Segmentation fault) 09:51:45.501664 [ 87.917863] udevd[2569]: worker [2589] failed while handling '/devices/platform/dmi-ipmi-si.0'
Hi Mark,
I have seen this issue previously. It would be specific to D05. I think that there is an issue with the FW in this board, in that DMI reports IPMI support incorrectly.
Could we add a kernel command-line to avoid IPMI detection from DMI, ipmi_si.trydmi=0
Thanks, John
Full details here, including bisection information and full logs:
https://kernelci.org/boot/id/5c0f88d259b514823d4925c0/
Unfortunately it looks like the bug has actually been around for a while but wasn't stopping us getting to a prompt:
https://storage.kernelci.org/next/master/next-20181210/arm64/defconfig/lab-c...
and it might still be some unrelated hang there.
On Tue, Dec 11, 2018 at 04:24:10PM +0000, John Garry wrote:
On 11/12/2018 15:23, Mark Brown wrote:
On Tue, Dec 11, 2018 at 05:10:16AM -0800, kernelci.org bot wrote:
defconfig: hip07-d05: lab-collabora: new failure (last pass: next-20181210)
It takes an oops during IPMI initialization:
I have seen this issue previously. It would be specific to D05. I think that there is an issue with the FW in this board, in that DMI reports IPMI support incorrectly.
Could we add a kernel command-line to avoid IPMI detection from DMI, ipmi_si.trydmi=0
Copying in Guillaume who can hopefully help with that (and who I should've copied in originally, sorry).
On 11/12/2018 16:50, Mark Brown wrote:
On Tue, Dec 11, 2018 at 04:24:10PM +0000, John Garry wrote:
On 11/12/2018 15:23, Mark Brown wrote:
On Tue, Dec 11, 2018 at 05:10:16AM -0800, kernelci.org bot wrote:
defconfig: hip07-d05: lab-collabora: new failure (last pass: next-20181210)It takes an oops during IPMI initialization:
I have seen this issue previously. It would be specific to D05. I think that there is an issue with the FW in this board, in that DMI reports IPMI support incorrectly.
Could we add a kernel command-line to avoid IPMI detection from DMI, ipmi_si.trydmi=0
Sure, I'll add this extra command line option to the device config now. Please let me know if a new firmware becomes available with a fix and we'll upgrade.
Copying in Guillaume who can hopefully help with that (and who I should've copied in originally, sorry).
No worries. Actually there was also an automated bisection submitted for this regression, but the d05 has some intermittent firmware errors so it didn't land on a valid commit. There might be another issue separate from the one with IPMI, I'm improving the bisection to deal with infrastructure errors that happen before the kernel starts so we might get some news if the d05 still fails even with the ipmi work-around.
Guillaume
On Tue, Dec 11, 2018 at 04:50:31PM +0000, Mark Brown wrote:
On Tue, Dec 11, 2018 at 04:24:10PM +0000, John Garry wrote:
On 11/12/2018 15:23, Mark Brown wrote:
On Tue, Dec 11, 2018 at 05:10:16AM -0800, kernelci.org bot wrote:
defconfig: hip07-d05: lab-collabora: new failure (last pass: next-20181210)It takes an oops during IPMI initialization:
I have seen this issue previously. It would be specific to D05. I think that there is an issue with the FW in this board, in that DMI reports IPMI support incorrectly.
Could we add a kernel command-line to avoid IPMI detection from DMI, ipmi_si.trydmi=0
Copying in Guillaume who can hopefully help with that (and who I should've copied in originally, sorry).
Hi all,
I tested next-20181210 on D05 and found it works well. I think it caused by the FW.
The log is as below: [ 0.000000] Booting Linux on physical CPU 0x0000010000 [0x410fd082] [ 0.000000] Linux version 4.20.0-rc6-next-20181211 (joyx@htsatcamb-server) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05)) #48 SMP PREEMPT Tue Dec 11 16:57:30 GMT 2018 [ 0.000000] Machine model: Hisilicon Hip07 D05 Development Board [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.60 by EDK II [ 0.000000] efi: SMBIOS=0x3f050000 SMBIOS 3.0=0x39b00000 ACPI=0x39bd0000 ACPI 2.0=0x39bd0014 MEMATTR=0x3ccc4018 MEMRESERVE=0x31902e98 [ 0.000000] cma: Reserved 32 MiB at 0x000000003d000000 [ 0.000000] OF: NUMA: parsing numa-distance-map-v1 [ 0.000000] NUMA: Warning: invalid memblk node 4 [mem 0x1040000000-0x1ffbffffff] [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x0000041ffbffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x41febf98840-0x41febf99fff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000041ffbffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000031902fff] [ 0.000000] node 0: [mem 0x0000000031903000-0x0000000031906fff] [ 0.000000] node 0: [mem 0x0000000031907000-0x000000003999ffff] [ 0.000000] node 0: [mem 0x00000000399a0000-0x0000000039a3ffff] [ 0.000000] node 0: [mem 0x0000000039a40000-0x0000000039a8ffff] [ 0.000000] node 0: [mem 0x0000000039a90000-0x0000000039a9ffff] [ 0.000000] node 0: [mem 0x0000000039aa0000-0x0000000039aeffff] [ 0.000000] node 0: [mem 0x0000000039af0000-0x0000000039bbffff] [ 0.000000] node 0: [mem 0x0000000039bc0000-0x0000000039bdffff] [ 0.000000] node 0: [mem 0x0000000039be0000-0x000000003a05ffff] [ 0.000000] node 0: [mem 0x000000003a060000-0x000000003f04ffff] [ 0.000000] node 0: [mem 0x000000003f050000-0x000000003f07ffff] [ 0.000000] node 0: [mem 0x000000003f080000-0x000000003fbfffff] [ 0.000000] node 0: [mem 0x0000001040000000-0x0000001ffbffffff] [ 0.000000] node 0: [mem 0x0000041000000000-0x0000041ffbffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 148 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000041ffbffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x40c with crng_init=0 [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55704 r8192 d30312 u94208 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32996880 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/joyx/Image rdinit=/init acpi=off [ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] printk: log_buf_len total cpu_extra contributions: 258048 bytes [ 0.000000] printk: log_buf_len min size: 131072 bytes [ 0.000000] printk: log_buf_len: 524288 bytes [ 0.000000] printk: early log buf free: 126460(96%) [ 0.000000] software IO TLB: mapped [mem 0x359a0000-0x399a0000] (64MB) [ 0.000000] Memory: 131560596K/134082560K available (11068K kernel code, 1570K rwdata, 5332K rodata, 1408K init, 379K bss, 2489196K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: VLPI support, direct LPI support [ 0.000000] GICv3: CPU0: found redistributor 10000 region 0:0x000000004d100000 [ 0.000000] ITS [mem 0x4c000000-0x4c03ffff] [ 0.000000] ITS@0x000000004c000000: Using ITS number 0 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x000000004c000000: allocated 524288 Devices @41feac00000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x000000004c000000: allocated 65536 Virtual CPUs @41feb580000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x000000004c000000: allocated 512 Interrupt Collections @41feb52a000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0x6c000000-0x6c03ffff] [ 0.000000] ITS@0x000000006c000000: Using ITS number 1 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x000000006c000000: allocated 524288 Devices @41fea800000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x000000006c000000: allocated 65536 Virtual CPUs @41feb600000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x000000006c000000: allocated 512 Interrupt Collections @41feb52c000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0xc6000000-0xc603ffff] [ 0.000000] ITS@0x00000000c6000000: Using ITS number 2 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x00000000c6000000: allocated 524288 Devices @41fea400000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x00000000c6000000: allocated 65536 Virtual CPUs @41feb680000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x00000000c6000000: allocated 512 Interrupt Collections @41feb52d000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0x8c6000000-0x8c603ffff] [ 0.000000] ITS@0x00000008c6000000: Using ITS number 3 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x00000008c6000000: allocated 524288 Devices @41fea000000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x00000008c6000000: allocated 65536 Virtual CPUs @41feb700000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x00000008c6000000: allocated 512 Interrupt Collections @41feb52e000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0x4004c000000-0x4004c03ffff] [ 0.000000] ITS@0x000004004c000000: Using ITS number 4 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x000004004c000000: allocated 524288 Devices @41fe9c00000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x000004004c000000: allocated 65536 Virtual CPUs @41feb780000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x000004004c000000: allocated 512 Interrupt Collections @41feb52f000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0x4006c000000-0x4006c03ffff] [ 0.000000] ITS@0x000004006c000000: Using ITS number 5 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x000004006c000000: allocated 524288 Devices @41fe9400000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x000004006c000000: allocated 65536 Virtual CPUs @41fe9880000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x000004006c000000: allocated 512 Interrupt Collections @41fe9801000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0x400c6000000-0x400c603ffff] [ 0.000000] ITS@0x00000400c6000000: Using ITS number 6 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x00000400c6000000: allocated 524288 Devices @41fe9000000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x00000400c6000000: allocated 65536 Virtual CPUs @41fe9900000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x00000400c6000000: allocated 512 Interrupt Collections @41fe9802000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0x408c6000000-0x408c603ffff] [ 0.000000] ITS@0x00000408c6000000: Using ITS number 7 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x00000408c6000000: allocated 524288 Devices @41fe8c00000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x00000408c6000000: allocated 65536 Virtual CPUs @41fe9980000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x00000408c6000000: allocated 512 Interrupt Collections @41fe9803000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] GICv3: using LPI property table @0x0000041fe9840000 [ 0.000000] ITS: Using DirectLPI for VPE invalidation [ 0.000000] ITS: Enabling GICv4 support [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000041fe9850000 [ 0.000000] arch_timer: cp15 timer(s) running at 50.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns [ 0.000001] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns [ 0.000159] Console: colour dummy device 80x25 [ 0.000446] printk: console [tty0] enabled [ 0.000499] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000) [ 0.000507] pid_max: default: 65536 minimum: 512 [ 0.000562] LSM: Security Framework initializing [ 0.035969] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.053360] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.053997] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.054584] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.054838] *** VALIDATE proc *** [ 0.054976] *** VALIDATE cgroup1 *** [ 0.054981] *** VALIDATE cgroup2 *** [ 0.096093] ASID allocator initialised with 32768 entries [ 0.104084] rcu: Hierarchical SRCU implementation. [ 0.112134] Platform MSI: interrupt-controller@4c000000 domain created [ 0.112148] Platform MSI: interrupt-controller@6c000000 domain created [ 0.112157] Platform MSI: interrupt-controller@c6000000 domain created [ 0.112165] Platform MSI: interrupt-controller@8,c6000000 domain created [ 0.112172] Platform MSI: interrupt-controller@400,4c000000 domain created [ 0.112179] Platform MSI: interrupt-controller@400,6c000000 domain created [ 0.112187] Platform MSI: interrupt-controller@400,c6000000 domain created [ 0.112194] Platform MSI: interrupt-controller@408,c6000000 domain created [ 0.112246] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@4c000000 domain created [ 0.112255] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@6c000000 domain created [ 0.112262] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@c6000000 domain created [ 0.112271] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@8,c6000000 domain created [ 0.112279] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@400,4c000000 domain created [ 0.112287] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@400,6c000000 domain created [ 0.112296] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@400,c6000000 domain created [ 0.112304] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@408,c6000000 domain created [ 0.112793] Remapping and enabling EFI services. [ 0.120095] smp: Bringing up secondary CPUs ... [ 0.202700] Detected PIPT I-cache on CPU1 [ 0.202714] GICv3: CPU1: found redistributor 10001 region 0:0x000000004d140000 [ 0.202720] GICv3: CPU1: using allocated LPI pending table @0x0000041fe9860000 [ 0.202857] CPU1: Booted secondary processor 0x0000010001 [0x410fd082] [ 0.285325] Detected PIPT I-cache on CPU2 [ 0.285332] GICv3: CPU2: found redistributor 10002 region 0:0x000000004d180000 [ 0.285336] GICv3: CPU2: using allocated LPI pending table @0x0000041fe9870000 [ 0.285442] CPU2: Booted secondary processor 0x0000010002 [0x410fd082] [ 0.367951] Detected PIPT I-cache on CPU3 [ 0.367958] GICv3: CPU3: found redistributor 10003 region 0:0x000000004d1c0000 [ 0.367963] GICv3: CPU3: using allocated LPI pending table @0x0000041fe9a00000 [ 0.368065] CPU3: Booted secondary processor 0x0000010003 [0x410fd082] [ 0.450582] Detected PIPT I-cache on CPU4 [ 0.450591] GICv3: CPU4: found redistributor 10100 region 0:0x000000004d200000 [ 0.450596] GICv3: CPU4: using allocated LPI pending table @0x0000041fe9a10000 [ 0.450700] CPU4: Booted secondary processor 0x0000010100 [0x410fd082] [ 0.533206] Detected PIPT I-cache on CPU5 [ 0.533213] GICv3: CPU5: found redistributor 10101 region 0:0x000000004d240000 [ 0.533218] GICv3: CPU5: using allocated LPI pending table @0x0000041fe9a20000 [ 0.533321] CPU5: Booted secondary processor 0x0000010101 [0x410fd082] [ 0.615835] Detected PIPT I-cache on CPU6 [ 0.615842] GICv3: CPU6: found redistributor 10102 region 0:0x000000004d280000 [ 0.615847] GICv3: CPU6: using allocated LPI pending table @0x0000041fe9a30000 [ 0.615952] CPU6: Booted secondary processor 0x0000010102 [0x410fd082] [ 0.698460] Detected PIPT I-cache on CPU7 [ 0.698469] GICv3: CPU7: found redistributor 10103 region 0:0x000000004d2c0000 [ 0.698473] GICv3: CPU7: using allocated LPI pending table @0x0000041fe9a40000 [ 0.698575] CPU7: Booted secondary processor 0x0000010103 [0x410fd082] [ 0.781090] Detected PIPT I-cache on CPU8 [ 0.781099] GICv3: CPU8: found redistributor 10200 region 0:0x000000004d300000 [ 0.781104] GICv3: CPU8: using allocated LPI pending table @0x0000041fe9a50000 [ 0.781211] CPU8: Booted secondary processor 0x0000010200 [0x410fd082] [ 0.863715] Detected PIPT I-cache on CPU9 [ 0.863723] GICv3: CPU9: found redistributor 10201 region 0:0x000000004d340000 [ 0.863728] GICv3: CPU9: using allocated LPI pending table @0x0000041fe9a60000 [ 0.863831] CPU9: Booted secondary processor 0x0000010201 [0x410fd082] [ 0.946342] Detected PIPT I-cache on CPU10 [ 0.946350] GICv3: CPU10: found redistributor 10202 region 0:0x000000004d380000 [ 0.946354] GICv3: CPU10: using allocated LPI pending table @0x0000041fe9a70000 [ 0.946458] CPU10: Booted secondary processor 0x0000010202 [0x410fd082] [ 1.028968] Detected PIPT I-cache on CPU11 [ 1.028976] GICv3: CPU11: found redistributor 10203 region 0:0x000000004d3c0000 [ 1.028981] GICv3: CPU11: using allocated LPI pending table @0x0000041fe9a80000 [ 1.029084] CPU11: Booted secondary processor 0x0000010203 [0x410fd082] [ 1.111596] Detected PIPT I-cache on CPU12 [ 1.111605] GICv3: CPU12: found redistributor 10300 region 0:0x000000004d400000 [ 1.111611] GICv3: CPU12: using allocated LPI pending table @0x0000041fe9a90000 [ 1.111717] CPU12: Booted secondary processor 0x0000010300 [0x410fd082] [ 1.194222] Detected PIPT I-cache on CPU13 [ 1.194230] GICv3: CPU13: found redistributor 10301 region 0:0x000000004d440000 [ 1.194235] GICv3: CPU13: using allocated LPI pending table @0x0000041fe9aa0000 [ 1.194339] CPU13: Booted secondary processor 0x0000010301 [0x410fd082] [ 1.276850] Detected PIPT I-cache on CPU14 [ 1.276858] GICv3: CPU14: found redistributor 10302 region 0:0x000000004d480000 [ 1.276862] GICv3: CPU14: using allocated LPI pending table @0x0000041fe9ab0000 [ 1.276967] CPU14: Booted secondary processor 0x0000010302 [0x410fd082] [ 1.359476] Detected PIPT I-cache on CPU15 [ 1.359484] GICv3: CPU15: found redistributor 10303 region 0:0x000000004d4c0000 [ 1.359489] GICv3: CPU15: using allocated LPI pending table @0x0000041fe9ac0000 [ 1.359590] CPU15: Booted secondary processor 0x0000010303 [0x410fd082] [ 1.441762] Detected PIPT I-cache on CPU16 [ 1.441775] GICv3: CPU16: found redistributor 30000 region 1:0x000000006d100000 [ 1.441781] GICv3: CPU16: using allocated LPI pending table @0x0000041fe9ad0000 [ 1.441930] CPU16: Booted secondary processor 0x0000030000 [0x410fd082] [ 1.524388] Detected PIPT I-cache on CPU17 [ 1.524397] GICv3: CPU17: found redistributor 30001 region 1:0x000000006d140000 [ 1.524402] GICv3: CPU17: using allocated LPI pending table @0x0000041fe9ae0000 [ 1.524545] CPU17: Booted secondary processor 0x0000030001 [0x410fd082] [ 1.607016] Detected PIPT I-cache on CPU18 [ 1.607026] GICv3: CPU18: found redistributor 30002 region 1:0x000000006d180000 [ 1.607031] GICv3: CPU18: using allocated LPI pending table @0x0000041fe9af0000 [ 1.607175] CPU18: Booted secondary processor 0x0000030002 [0x410fd082] [ 1.689644] Detected PIPT I-cache on CPU19 [ 1.689654] GICv3: CPU19: found redistributor 30003 region 1:0x000000006d1c0000 [ 1.689659] GICv3: CPU19: using allocated LPI pending table @0x0000041fe9b00000 [ 1.689802] CPU19: Booted secondary processor 0x0000030003 [0x410fd082] [ 1.772276] Detected PIPT I-cache on CPU20 [ 1.772289] GICv3: CPU20: found redistributor 30100 region 1:0x000000006d200000 [ 1.772296] GICv3: CPU20: using allocated LPI pending table @0x0000041fe9b10000 [ 1.772445] CPU20: Booted secondary processor 0x0000030100 [0x410fd082] [ 1.854901] Detected PIPT I-cache on CPU21 [ 1.854911] GICv3: CPU21: found redistributor 30101 region 1:0x000000006d240000 [ 1.854916] GICv3: CPU21: using allocated LPI pending table @0x0000041fe9b20000 [ 1.855059] CPU21: Booted secondary processor 0x0000030101 [0x410fd082] [ 1.937530] Detected PIPT I-cache on CPU22 [ 1.937539] GICv3: CPU22: found redistributor 30102 region 1:0x000000006d280000 [ 1.937544] GICv3: CPU22: using allocated LPI pending table @0x0000041fe9b30000 [ 1.937688] CPU22: Booted secondary processor 0x0000030102 [0x410fd082] [ 2.020158] Detected PIPT I-cache on CPU23 [ 2.020169] GICv3: CPU23: found redistributor 30103 region 1:0x000000006d2c0000 [ 2.020173] GICv3: CPU23: using allocated LPI pending table @0x0000041fe9b40000 [ 2.020315] CPU23: Booted secondary processor 0x0000030103 [0x410fd082] [ 2.102789] Detected PIPT I-cache on CPU24 [ 2.102802] GICv3: CPU24: found redistributor 30200 region 1:0x000000006d300000 [ 2.102810] GICv3: CPU24: using allocated LPI pending table @0x0000041fe9b50000 [ 2.102960] CPU24: Booted secondary processor 0x0000030200 [0x410fd082] [ 2.185415] Detected PIPT I-cache on CPU25 [ 2.185426] GICv3: CPU25: found redistributor 30201 region 1:0x000000006d340000 [ 2.185430] GICv3: CPU25: using allocated LPI pending table @0x0000041fe9b60000 [ 2.185572] CPU25: Booted secondary processor 0x0000030201 [0x410fd082] [ 2.268043] Detected PIPT I-cache on CPU26 [ 2.268054] GICv3: CPU26: found redistributor 30202 region 1:0x000000006d380000 [ 2.268059] GICv3: CPU26: using allocated LPI pending table @0x0000041fe9b70000 [ 2.268203] CPU26: Booted secondary processor 0x0000030202 [0x410fd082] [ 2.350672] Detected PIPT I-cache on CPU27 [ 2.350683] GICv3: CPU27: found redistributor 30203 region 1:0x000000006d3c0000 [ 2.350688] GICv3: CPU27: using allocated LPI pending table @0x0000041fe9b80000 [ 2.350830] CPU27: Booted secondary processor 0x0000030203 [0x410fd082] [ 2.433304] Detected PIPT I-cache on CPU28 [ 2.433317] GICv3: CPU28: found redistributor 30300 region 1:0x000000006d400000 [ 2.433324] GICv3: CPU28: using allocated LPI pending table @0x0000041fe9b90000 [ 2.433474] CPU28: Booted secondary processor 0x0000030300 [0x410fd082] [ 2.515930] Detected PIPT I-cache on CPU29 [ 2.515940] GICv3: CPU29: found redistributor 30301 region 1:0x000000006d440000 [ 2.515945] GICv3: CPU29: using allocated LPI pending table @0x0000041fe9ba0000 [ 2.516088] CPU29: Booted secondary processor 0x0000030301 [0x410fd082] [ 2.598559] Detected PIPT I-cache on CPU30 [ 2.598570] GICv3: CPU30: found redistributor 30302 region 1:0x000000006d480000 [ 2.598574] GICv3: CPU30: using allocated LPI pending table @0x0000041fe9bb0000 [ 2.598718] CPU30: Booted secondary processor 0x0000030302 [0x410fd082] [ 2.681189] Detected PIPT I-cache on CPU31 [ 2.681200] GICv3: CPU31: found redistributor 30303 region 1:0x000000006d4c0000 [ 2.681205] GICv3: CPU31: using allocated LPI pending table @0x0000041fe9bc0000 [ 2.681349] CPU31: Booted secondary processor 0x0000030303 [0x410fd082] [ 2.763503] Detected PIPT I-cache on CPU32 [ 2.763540] GICv3: CPU32: found redistributor 50000 region 2:0x000004004d100000 [ 2.763557] GICv3: CPU32: using allocated LPI pending table @0x0000041fe9bd0000 [ 2.763709] CPU32: Booted secondary processor 0x0000050000 [0x410fd082] [ 2.846121] Detected PIPT I-cache on CPU33 [ 2.846143] GICv3: CPU33: found redistributor 50001 region 2:0x000004004d140000 [ 2.846148] GICv3: CPU33: using allocated LPI pending table @0x0000041fe9be0000 [ 2.846252] CPU33: Booted secondary processor 0x0000050001 [0x410fd082] [ 2.928764] Detected PIPT I-cache on CPU34 [ 2.928786] GICv3: CPU34: found redistributor 50002 region 2:0x000004004d180000 [ 2.928791] GICv3: CPU34: using allocated LPI pending table @0x0000041fe9bf0000 [ 2.928896] CPU34: Booted secondary processor 0x0000050002 [0x410fd082] [ 3.011405] Detected PIPT I-cache on CPU35 [ 3.011427] GICv3: CPU35: found redistributor 50003 region 2:0x000004004d1c0000 [ 3.011432] GICv3: CPU35: using allocated LPI pending table @0x0000041fe8800000 [ 3.011536] CPU35: Booted secondary processor 0x0000050003 [0x410fd082] [ 3.094049] Detected PIPT I-cache on CPU36 [ 3.094072] GICv3: CPU36: found redistributor 50100 region 2:0x000004004d200000 [ 3.094078] GICv3: CPU36: using allocated LPI pending table @0x0000041fe8810000 [ 3.094184] CPU36: Booted secondary processor 0x0000050100 [0x410fd082] [ 3.176690] Detected PIPT I-cache on CPU37 [ 3.176712] GICv3: CPU37: found redistributor 50101 region 2:0x000004004d240000 [ 3.176717] GICv3: CPU37: using allocated LPI pending table @0x0000041fe8820000 [ 3.176820] CPU37: Booted secondary processor 0x0000050101 [0x410fd082] [ 3.259335] Detected PIPT I-cache on CPU38 [ 3.259357] GICv3: CPU38: found redistributor 50102 region 2:0x000004004d280000 [ 3.259362] GICv3: CPU38: using allocated LPI pending table @0x0000041fe8830000 [ 3.259465] CPU38: Booted secondary processor 0x0000050102 [0x410fd082] [ 3.341975] Detected PIPT I-cache on CPU39 [ 3.341998] GICv3: CPU39: found redistributor 50103 region 2:0x000004004d2c0000 [ 3.342003] GICv3: CPU39: using allocated LPI pending table @0x0000041fe8840000 [ 3.342107] CPU39: Booted secondary processor 0x0000050103 [0x410fd082] [ 3.424622] Detected PIPT I-cache on CPU40 [ 3.424646] GICv3: CPU40: found redistributor 50200 region 2:0x000004004d300000 [ 3.424652] GICv3: CPU40: using allocated LPI pending table @0x0000041fe8850000 [ 3.424757] CPU40: Booted secondary processor 0x0000050200 [0x410fd082] [ 3.507263] Detected PIPT I-cache on CPU41 [ 3.507286] GICv3: CPU41: found redistributor 50201 region 2:0x000004004d340000 [ 3.507290] GICv3: CPU41: using allocated LPI pending table @0x0000041fe8860000 [ 3.507394] CPU41: Booted secondary processor 0x0000050201 [0x410fd082] [ 3.589907] Detected PIPT I-cache on CPU42 [ 3.589930] GICv3: CPU42: found redistributor 50202 region 2:0x000004004d380000 [ 3.589935] GICv3: CPU42: using allocated LPI pending table @0x0000041fe8870000 [ 3.590040] CPU42: Booted secondary processor 0x0000050202 [0x410fd082] [ 3.672547] Detected PIPT I-cache on CPU43 [ 3.672570] GICv3: CPU43: found redistributor 50203 region 2:0x000004004d3c0000 [ 3.672575] GICv3: CPU43: using allocated LPI pending table @0x0000041fe8880000 [ 3.672680] CPU43: Booted secondary processor 0x0000050203 [0x410fd082] [ 3.755193] Detected PIPT I-cache on CPU44 [ 3.755218] GICv3: CPU44: found redistributor 50300 region 2:0x000004004d400000 [ 3.755225] GICv3: CPU44: using allocated LPI pending table @0x0000041fe8890000 [ 3.755331] CPU44: Booted secondary processor 0x0000050300 [0x410fd082] [ 3.837834] Detected PIPT I-cache on CPU45 [ 3.837857] GICv3: CPU45: found redistributor 50301 region 2:0x000004004d440000 [ 3.837862] GICv3: CPU45: using allocated LPI pending table @0x0000041fe88a0000 [ 3.837965] CPU45: Booted secondary processor 0x0000050301 [0x410fd082] [ 3.920478] Detected PIPT I-cache on CPU46 [ 3.920501] GICv3: CPU46: found redistributor 50302 region 2:0x000004004d480000 [ 3.920506] GICv3: CPU46: using allocated LPI pending table @0x0000041fe88b0000 [ 3.920610] CPU46: Booted secondary processor 0x0000050302 [0x410fd082] [ 4.003121] Detected PIPT I-cache on CPU47 [ 4.003144] GICv3: CPU47: found redistributor 50303 region 2:0x000004004d4c0000 [ 4.003149] GICv3: CPU47: using allocated LPI pending table @0x0000041fe88c0000 [ 4.003254] CPU47: Booted secondary processor 0x0000050303 [0x410fd082] [ 4.085421] Detected PIPT I-cache on CPU48 [ 4.085451] GICv3: CPU48: found redistributor 70000 region 3:0x000004006d100000 [ 4.085459] GICv3: CPU48: using allocated LPI pending table @0x0000041fe88d0000 [ 4.085605] CPU48: Booted secondary processor 0x0000070000 [0x410fd082] [ 4.168060] Detected PIPT I-cache on CPU49 [ 4.168086] GICv3: CPU49: found redistributor 70001 region 3:0x000004006d140000 [ 4.168092] GICv3: CPU49: using allocated LPI pending table @0x0000041fe88e0000 [ 4.168232] CPU49: Booted secondary processor 0x0000070001 [0x410fd082] [ 4.250705] Detected PIPT I-cache on CPU50 [ 4.250731] GICv3: CPU50: found redistributor 70002 region 3:0x000004006d180000 [ 4.250736] GICv3: CPU50: using allocated LPI pending table @0x0000041fe88f0000 [ 4.250878] CPU50: Booted secondary processor 0x0000070002 [0x410fd082] [ 4.333348] Detected PIPT I-cache on CPU51 [ 4.333374] GICv3: CPU51: found redistributor 70003 region 3:0x000004006d1c0000 [ 4.333380] GICv3: CPU51: using allocated LPI pending table @0x0000041fe8900000 [ 4.333522] CPU51: Booted secondary processor 0x0000070003 [0x410fd082] [ 4.415997] Detected PIPT I-cache on CPU52 [ 4.416027] GICv3: CPU52: found redistributor 70100 region 3:0x000004006d200000 [ 4.416035] GICv3: CPU52: using allocated LPI pending table @0x0000041fe8910000 [ 4.416184] CPU52: Booted secondary processor 0x0000070100 [0x410fd082] [ 4.498638] Detected PIPT I-cache on CPU53 [ 4.498664] GICv3: CPU53: found redistributor 70101 region 3:0x000004006d240000 [ 4.498669] GICv3: CPU53: using allocated LPI pending table @0x0000041fe8920000 [ 4.498810] CPU53: Booted secondary processor 0x0000070101 [0x410fd082] [ 4.581284] Detected PIPT I-cache on CPU54 [ 4.581311] GICv3: CPU54: found redistributor 70102 region 3:0x000004006d280000 [ 4.581316] GICv3: CPU54: using allocated LPI pending table @0x0000041fe8930000 [ 4.581457] CPU54: Booted secondary processor 0x0000070102 [0x410fd082] [ 4.663927] Detected PIPT I-cache on CPU55 [ 4.663954] GICv3: CPU55: found redistributor 70103 region 3:0x000004006d2c0000 [ 4.663959] GICv3: CPU55: using allocated LPI pending table @0x0000041fe8940000 [ 4.664099] CPU55: Booted secondary processor 0x0000070103 [0x410fd082] [ 4.746575] Detected PIPT I-cache on CPU56 [ 4.746604] GICv3: CPU56: found redistributor 70200 region 3:0x000004006d300000 [ 4.746613] GICv3: CPU56: using allocated LPI pending table @0x0000041fe8950000 [ 4.746760] CPU56: Booted secondary processor 0x0000070200 [0x410fd082] [ 4.829215] Detected PIPT I-cache on CPU57 [ 4.829241] GICv3: CPU57: found redistributor 70201 region 3:0x000004006d340000 [ 4.829247] GICv3: CPU57: using allocated LPI pending table @0x0000041fe8960000 [ 4.829388] CPU57: Booted secondary processor 0x0000070201 [0x410fd082] [ 4.911861] Detected PIPT I-cache on CPU58 [ 4.911888] GICv3: CPU58: found redistributor 70202 region 3:0x000004006d380000 [ 4.911894] GICv3: CPU58: using allocated LPI pending table @0x0000041fe8970000 [ 4.912034] CPU58: Booted secondary processor 0x0000070202 [0x410fd082] [ 4.994506] Detected PIPT I-cache on CPU59 [ 4.994532] GICv3: CPU59: found redistributor 70203 region 3:0x000004006d3c0000 [ 4.994538] GICv3: CPU59: using allocated LPI pending table @0x0000041fe8980000 [ 4.994678] CPU59: Booted secondary processor 0x0000070203 [0x410fd082] [ 5.077154] Detected PIPT I-cache on CPU60 [ 5.077184] GICv3: CPU60: found redistributor 70300 region 3:0x000004006d400000 [ 5.077194] GICv3: CPU60: using allocated LPI pending table @0x0000041fe8990000 [ 5.077341] CPU60: Booted secondary processor 0x0000070300 [0x410fd082] [ 5.159795] Detected PIPT I-cache on CPU61 [ 5.159822] GICv3: CPU61: found redistributor 70301 region 3:0x000004006d440000 [ 5.159827] GICv3: CPU61: using allocated LPI pending table @0x0000041fe89a0000 [ 5.159969] CPU61: Booted secondary processor 0x0000070301 [0x410fd082] [ 5.242443] Detected PIPT I-cache on CPU62 [ 5.242470] GICv3: CPU62: found redistributor 70302 region 3:0x000004006d480000 [ 5.242475] GICv3: CPU62: using allocated LPI pending table @0x0000041fe89b0000 [ 5.242618] CPU62: Booted secondary processor 0x0000070302 [0x410fd082] [ 5.325086] Detected PIPT I-cache on CPU63 [ 5.325113] GICv3: CPU63: found redistributor 70303 region 3:0x000004006d4c0000 [ 5.325118] GICv3: CPU63: using allocated LPI pending table @0x0000041fe89c0000 [ 5.325258] CPU63: Booted secondary processor 0x0000070303 [0x410fd082] [ 5.325338] smp: Brought up 1 node, 64 CPUs [ 5.325949] SMP: Total of 64 processors activated. [ 5.325953] CPU features: detected: GIC system register CPU interface [ 5.325957] CPU features: detected: 32-bit EL0 Support [ 5.325962] CPU features: detected: CRC32 instructions [ 37.857913] CPU: All CPU(s) started at EL2 [ 37.858056] alternatives: patching kernel code [ 37.859195] devtmpfs: initialized [ 37.861655] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 37.861850] futex hash table entries: 16384 (order: 8, 1048576 bytes) [ 37.863258] pinctrl core: initialized pinctrl subsystem [ 37.863848] SMBIOS 3.0.0 present. [ 37.863857] DMI: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT17 Nemo 2.0 RC0 10/05/2018 [ 37.864066] NET: Registered protocol family 16 [ 37.864914] audit: initializing netlink subsys (disabled) [ 37.865008] audit: type=2000 audit(3.660:1): state=initialized audit_enabled=0 res=1 [ 37.865530] cpuidle: using governor menu [ 37.865723] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) [ 37.865729] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 37.866862] DMA: preallocated 256 KiB pool for atomic allocations [ 37.867315] Serial: AMBA PL011 UART driver [ 37.878295] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 37.878303] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 37.878308] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 37.878312] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 37.878720] cryptd: max_cpu_qlen set to 1000 [ 37.879341] ACPI: Interpreter disabled. [ 37.879892] vgaarb: loaded [ 37.880053] SCSI subsystem initialized [ 37.880341] usbcore: registered new interface driver usbfs [ 37.880358] usbcore: registered new interface driver hub [ 37.880554] usbcore: registered new device driver usb [ 37.880801] pps_core: LinuxPPS API ver. 1 registered [ 37.880810] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 37.880821] PTP clock support registered [ 37.880865] EDAC MC: Ver: 3.0.0 [ 37.881061] Registered efivars operations [ 37.881612] Advanced Linux Sound Architecture Driver Initialized. [ 37.882021] clocksource: Switched to clocksource arch_sys_counter [ 37.882175] VFS: Disk quotas dquot_6.6.0 [ 37.882203] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 37.882226] *** VALIDATE hugetlbfs *** [ 37.882298] pnp: PnP ACPI: disabled [ 37.884713] NET: Registered protocol family 2 [ 37.885270] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes) [ 37.885997] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 37.887227] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 37.888046] TCP: Hash tables configured (established 524288 bind 65536) [ 37.888455] UDP hash table entries: 65536 (order: 9, 2097152 bytes) [ 37.889229] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes) [ 37.889975] NET: Registered protocol family 1 [ 37.890252] RPC: Registered named UNIX socket transport module. [ 37.890256] RPC: Registered udp transport module. [ 37.890260] RPC: Registered tcp transport module. [ 37.890264] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 37.890331] Unpacking initramfs... [ 38.431501] Freeing initrd memory: 29988K [ 38.434774] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 38.435078] kvm [1]: 8-bit VMID [ 38.435083] kvm [1]: IPA Size Limit: 44bits [ 38.435702] kvm [1]: GICv4 support disabled [ 38.435707] kvm [1]: vgic-v2@fe020000 [ 38.435735] kvm [1]: GIC system register CPU interface enabled [ 38.436492] kvm [1]: vgic interrupt IRQ1 [ 38.437216] kvm [1]: Hyp mode initialized successfully [ 38.487671] Initialise system trusted keyrings [ 38.487769] workingset: timestamp_bits=44 max_order=25 bucket_order=0 [ 38.490524] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 38.490949] NFS: Registering the id_resolver key type [ 38.490958] Key type id_resolver registered [ 38.490962] Key type id_legacy registered [ 38.490969] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 38.491017] 9p: Installing v9fs 9p2000 file system support [ 38.509723] Key type asymmetric registered [ 38.509730] Asymmetric key parser 'x509' registered [ 38.509749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 38.509755] io scheduler mq-deadline registered [ 38.509759] io scheduler kyber registered [ 38.512628] hisi-lpc a01b0000.isa: registered range [0x0000000000ffbfff - 0x0000000000ffffff] [ 38.515403] hisi-pcie-almost-ecam af800000.pcie: host bridge /soc/pcie@a00a0000 ranges: [ 38.515420] hisi-pcie-almost-ecam af800000.pcie: MEM 0xa8000000..0xaf7effff -> 0xa8000000 [ 38.515429] hisi-pcie-almost-ecam af800000.pcie: IO 0xaf7f0000..0xaf7fffff -> 0x00000000 [ 38.515438] hisi-pcie-almost-ecam af800000.pcie: resource collision: [io 0x0000-0xffff] conflicts with IPMI Address 1 [io 0x00e4] [ 38.515447] hisi-pcie-almost-ecam: probe of af800000.pcie failed with error -16 [ 38.515817] EINJ: ACPI disabled. [ 38.519589] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 38.520402] SuperH (H)SCI(F) driver initialized [ 38.520545] msm_serial: driver initialized [ 38.520775] arm-smmu-v3 d0040000.smmu_alg: option hisilicon,broken-prefetch-cmd [ 38.520857] arm-smmu-v3 d0040000.smmu_alg: ias 44-bit, oas 44-bit (features 0x00000f0d) [ 38.524363] arm-smmu-v3 8d0040000.smmu_alg: option hisilicon,broken-prefetch-cmd [ 38.524449] arm-smmu-v3 8d0040000.smmu_alg: ias 44-bit, oas 44-bit (features 0x00000f0d) [ 38.527710] arm-smmu-v3 400d0040000.smmu_alg: option hisilicon,broken-prefetch-cmd [ 38.527793] arm-smmu-v3 400d0040000.smmu_alg: ias 44-bit, oas 44-bit (features 0x00000f0d) [ 38.531165] arm-smmu-v3 408d0040000.smmu_alg: option hisilicon,broken-prefetch-cmd [ 38.531268] arm-smmu-v3 408d0040000.smmu_alg: ias 44-bit, oas 44-bit (features 0x00000f0d) [ 38.551308] loop: module loaded [ 38.564642] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.564728] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.564808] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.564887] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.564965] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565045] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565124] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565204] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565282] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565362] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565441] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565519] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565598] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565677] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565755] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565834] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565914] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565994] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.566080] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.566160] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.566238] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.566371] cma: cma_alloc: alloc failed, req-size: 128 pages, ret: -12 [ 38.566564] cma: cma_alloc: alloc failed, req-size: 1024 pages, ret: -12 [ 38.569166] scsi host0: hisi_sas_v2_hw [ 39.198633] hisi_sas_v2_hw a2000000.sas: phyup: phy0 link_rate=11 [ 39.198653] hisi_sas_v2_hw a2000000.sas: phyup: phy1 link_rate=11 [ 39.203631] hisi_sas_v2_hw a2000000.sas: phyup: phy2 link_rate=11 [ 39.203641] hisi_sas_v2_hw a2000000.sas: phyup: phy3 link_rate=11 [ 39.203649] hisi_sas_v2_hw a2000000.sas: phyup: phy4 link_rate=11 [ 39.203659] hisi_sas_v2_hw a2000000.sas: phyup: phy5 link_rate=11 [ 39.203668] hisi_sas_v2_hw a2000000.sas: phyup: phy6 link_rate=11 [ 39.203678] hisi_sas_v2_hw a2000000.sas: phyup: phy7 link_rate=11 [ 39.210342] hisi_sas_v2_hw a2000000.sas: dev[0:2] found [ 39.213623] hisi_sas_v2_hw a2000000.sas: dev[2:5] found [ 39.219415] hisi_sas_v2_hw a2000000.sas: dev[1:1] found [ 39.226032] hisi_sas_v2_hw a2000000.sas: dev[3:1] found [ 39.232668] hisi_sas_v2_hw a2000000.sas: dev[4:1] found [ 39.232785] hisi_sas_v2_hw a2000000.sas: dev[5:1] found [ 39.239415] hisi_sas_v2_hw a2000000.sas: dev[6:1] found [ 39.246052] hisi_sas_v2_hw a2000000.sas: dev[7:1] found [ 39.252660] hisi_sas_v2_hw a2000000.sas: dev[8:1] found [ 39.259334] hisi_sas_v2_hw a2000000.sas: dev[9:1] found [ 39.259520] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 39.420013] ata1.00: ATA-8: HGST HUS724040ALA640, MFAOA8B0, max UDMA/133 [ 39.420027] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32) [ 39.421818] ata1.00: configured for UDMA/133 [ 39.421843] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 39.432874] scsi 0:0:0:0: Direct-Access ATA HGST HUS724040AL A8B0 PQ: 0 ANSI: 5 [ 39.433185] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 39.433215] sd 0:0:0:0: [sda] Write Protect is off [ 39.433254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 39.471281] scsi 0:0:1:0: Direct-Access SanDisk LT0200MO P404 PQ: 0 ANSI: 6 [ 39.486941] sda: sda1 [ 39.487973] sd 0:0:0:0: [sda] Attached SCSI disk [ 39.769843] scsi 0:0:2:0: Direct-Access SanDisk LT0200MO P404 PQ: 0 ANSI: 6 [ 39.947275] sd 0:0:1:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 39.989339] sd 0:0:1:0: [sdb] Write Protect is off [ 40.031685] scsi 0:0:3:0: Direct-Access HGST HUC156030CSS200 A3F0 PQ: 0 ANSI: 6 [ 40.034071] sd 0:0:3:0: [sdd] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 40.035291] sd 0:0:3:0: [sdd] Write Protect is off [ 40.037640] sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 40.059425] sd 0:0:3:0: [sdd] Attached SCSI disk [ 40.071332] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 40.071380] scsi 0:0:4:0: Direct-Access SanDisk LT0200MO P404 PQ: 0 ANSI: 6 [ 40.245865] sd 0:0:2:0: [sdc] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 40.287947] sd 0:0:2:0: [sdc] Write Protect is off [ 40.369964] sd 0:0:2:0: [sdc] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 40.370017] scsi 0:0:5:0: Direct-Access SanDisk LT0200MO P404 PQ: 0 ANSI: 6 [ 40.547427] sd 0:0:4:0: [sde] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 40.589465] sd 0:0:4:0: [sde] Write Protect is off [ 40.668789] scsi 0:0:6:0: Direct-Access SanDisk LT0200MO P404 PQ: 0 ANSI: 6 [ 40.671583] sd 0:0:4:0: [sde] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 40.734152] sdb: sdb1 sdb2 [ 40.846100] sd 0:0:5:0: [sdf] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 40.888148] sd 0:0:5:0: [sdf] Write Protect is off [ 40.893800] sd 0:0:6:0: [sdg] Disabling DIF Type 1 protection [ 40.967256] scsi 0:0:7:0: Direct-Access SanDisk LT0200MO P404 PQ: 0 ANSI: 6 [ 40.970171] sd 0:0:5:0: [sdf] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 41.008257] random: fast init done [ 41.032637] sdc: sdc1 sdc2 sdc3 [ 41.144708] sd 0:0:6:0: [sdg] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 41.186749] sd 0:0:6:0: [sdg] Write Protect is off [ 41.229168] scsi 0:0:8:0: Enclosure 12G SAS Expander RevB PQ: 0 ANSI: 6 [ 41.229274] scsi 0:0:8:0: Power-on or device reset occurred [ 41.231546] libphy: Fixed MDIO Bus: probed [ 41.231688] tun: Universal TUN/TAP device driver, 1.6 [ 41.231990] thunder_xcv, ver 1.0 [ 41.232009] thunder_bgx, ver 1.0 [ 41.232026] nicpf, ver 1.0 [ 41.268742] sd 0:0:6:0: [sdg] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 41.306280] sd 0:0:1:0: [sdb] Attached SCSI disk [ 41.334505] sde: sde1 sde2 sde3 [ 41.443959] sd 0:0:7:0: [sdh] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 41.486007] sd 0:0:7:0: [sdh] Write Protect is off [ 41.568030] sd 0:0:7:0: [sdh] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 41.590426] mdio_bus Mii-603c0000.mdio: MDIO reset fail [ 41.590432] libphy: Hisilicon MII Bus: probed [ 41.604566] sd 0:0:2:0: [sdc] Attached SCSI disk [ 41.632812] sdf: sdf1 sdf2 sdf3 [ 41.906402] sd 0:0:4:0: [sde] Attached SCSI disk [ 42.204683] sd 0:0:5:0: [sdf] Attached SCSI disk [ 42.231450] sdh: sdh1 sdh2 [ 42.382819] hns-nic soc:ethernet@4: No valid mac, use random mac a2:04:2d:5a:18:6a [ 42.388328] hns-nic soc:ethernet@4 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 256 [ 42.388928] hns-nic soc:ethernet@5: No valid mac, use random mac 26:65:e4:af:9c:85 [ 42.394990] hns-nic soc:ethernet@0: No valid mac, use random mac 1e:86:a1:67:3c:9f [ 42.401030] hns-nic soc:ethernet@1: No valid mac, use random mac ce:88:68:ba:1d:9c [ 42.406949] hclge is initializing [ 42.406956] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 42.406960] hns3: Copyright (c) 2017 Huawei Corporation. [ 42.406998] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 42.407002] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 42.407023] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 42.407027] igb: Copyright (c) 2007-2014 Intel Corporation. [ 42.407047] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 42.407052] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 42.407240] sky2: driver version 1.30 [ 42.407528] VFIO - User Level meta-driver version: 0.3 [ 42.408087] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 42.408092] ehci-pci: EHCI PCI platform driver [ 42.408108] ehci-platform: EHCI generic platform driver [ 42.408202] ehci-platform a7020000.ehci: EHCI Host Controller [ 42.408212] ehci-platform a7020000.ehci: new USB bus registered, assigned bus number 1 [ 42.408439] ehci-platform a7020000.ehci: irq 339, io mem 0xa7020000 [ 42.422015] ehci-platform a7020000.ehci: USB 2.0 started, EHCI 1.00 [ 42.422222] hub 1-0:1.0: USB hub found [ 42.422234] hub 1-0:1.0: 2 ports detected [ 42.422400] ehci-orion: EHCI orion driver [ 42.422444] ehci-exynos: EHCI EXYNOS driver [ 42.422480] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 42.422492] ohci-pci: OHCI PCI platform driver [ 42.422510] ohci-platform: OHCI generic platform driver [ 42.422573] ohci-platform a7030000.ohci: Generic Platform OHCI controller [ 42.422581] ohci-platform a7030000.ohci: new USB bus registered, assigned bus number 2 [ 42.422672] ohci-platform a7030000.ohci: irq 340, io mem 0xa7030000 [ 42.486191] hub 2-0:1.0: USB hub found [ 42.486203] hub 2-0:1.0: 2 ports detected [ 42.486346] ohci-exynos: OHCI EXYNOS driver [ 42.486534] usbcore: registered new interface driver usb-storage [ 42.613408] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0 [ 42.613657] i2c /dev entries driver [ 42.615224] sdhci: Secure Digital Host Controller Interface driver [ 42.615229] sdhci: Copyright(c) Pierre Ossman [ 42.615379] Synopsys Designware Multimedia Card Interface Driver [ 42.615713] sdhci-pltfm: SDHCI platform and OF driver helper [ 42.617216] ledtrig-cpu: registered to indicate activity on CPUs [ 42.617702] usbcore: registered new interface driver usbhid [ 42.617706] usbhid: USB HID core driver [ 42.618918] NET: Registered protocol family 17 [ 42.618999] 9pnet: Installing 9P2000 support [ 42.619029] Key type dns_resolver registered [ 42.619256] registered taskstats version 1 [ 42.619260] Loading compiled-in X.509 certificates [ 42.619478] 602b0000.uart: ttyAMA0 at MMIO 0x602b0000 (irq = 341, base_baud = 0) is a SBSA [ 42.626259] sd 0:0:6:0: [sdg] Attached SCSI disk [ 42.647383] printk: console [ttyAMA0] enabled [ 42.758014] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 42.803593] sd 0:0:7:0: [sdh] Attached SCSI disk [ 42.826958] rtc-efi rtc-efi: setting system clock to 2018-12-11 17:09:49 UTC (1544548189) [ 42.962621] hub 1-1:1.0: USB hub found [ 42.963069] ALSA device list: [ 42.968839] hub 1-1:1.0: 4 ports detected [ 42.971826] No soundcards found. [ 46.718560] Freeing unused kernel memory: 1408K [ 46.746123] Run /init as init process Starting rcS... ++ Mounting filesystem ifdown: interface lo not configured ifdown: interface eth0 not configured ++ Starting ssh daemon [ 46.794176] random: sshd: uninitialized urandom read (32 bytes read) [ 46.846017] usb 1-2: new high-speed USB device number 3 using ehci-platform ip: RTNETLINK answers: File exists udhcpc: started, v1.29.0.git Setting IP address 0.0.0.0 on eth0 /var/empty must be owned by root and not group or world-writable. rcS Complete Welcome to Mini Linux GNU/Linux 4.20.0-rc6-next-20181211 aarch64 Version: 1.1.6 .--. |o_o | |:_/ | // \ \ (| | ) /'_ _/`\ ___)=(___/ Documentation: http://open-estuary.org E-mail: Chinafengliang@163.com estuary:/$ udhcpc: sending discover [ 47.006618] hub 1-2:1.0: USB hub found [ 47.010463] hub 1-2:1.0: 4 ports detected [ 47.086018] usb 1-1.1: new full-speed USB device number 4 using ehci-platform [ 47.302012] usb 1-2.1: new full-speed USB device number 5 using ehci-platform [ 47.418664] input: Keyboard/Mouse KVM 1.1.0 as /devices/platform/soc/a7020000.ehci/usb1/1-2/1-2.1/1-2.1:1.0/0003:12D1:0003.0001/input/input0 [ 47.490246] hid-generic 0003:12D1:0003.0001: input: USB HID v1.10 Keyboard [Keyboard/Mouse KVM 1.1.0] on usb-a7020000.ehci-2.1/input0 [ 47.503263] input: Keyboard/Mouse KVM 1.1.0 as /devices/platform/soc/a7020000.ehci/usb1/1-2/1-2.1/1-2.1:1.1/0003:12D1:0003.0002/input/input1 [ 47.515917] hid-generic 0003:12D1:0003.0002: input: USB HID v1.10 Mouse [Keyboard/Mouse KVM 1.1.0] on usb-a7020000.ehci-2.1/input1 udhcpc: sending discover udhcpc: sending discover udhcpc: no lease, failing
estuary:/$
Best Regards, Wei
linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 11/12/2018 20:15, Wei Xu wrote:
On Tue, Dec 11, 2018 at 04:50:31PM +0000, Mark Brown wrote:
On Tue, Dec 11, 2018 at 04:24:10PM +0000, John Garry wrote:
On 11/12/2018 15:23, Mark Brown wrote:
On Tue, Dec 11, 2018 at 05:10:16AM -0800, kernelci.org bot wrote:
defconfig: hip07-d05: lab-collabora: new failure (last pass: next-20181210)It takes an oops during IPMI initialization:
I have seen this issue previously. It would be specific to D05. I think that there is an issue with the FW in this board, in that DMI reports IPMI support incorrectly.
Could we add a kernel command-line to avoid IPMI detection from DMI, ipmi_si.trydmi=0
Copying in Guillaume who can hopefully help with that (and who I should've copied in originally, sorry).
Hi all,
I tested next-20181210 on D05 and found it works well. I think it caused by the FW.
Having checked this a bit further, it seems that the issue with the kernelci D05 is also that the FW is incompatible for the PCI host ACPI kernel support. That's why we see errors like these: [ 75.525528] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI] [ 75.525535] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND) [ 75.525546] acpi PNP0A08:00: MCFG quirk: ECAM at [mem 0xa8000000-0xa87fffff] for [bus 80-87] with hisi_pcie_ops [ 75.526223] acpi PNP0A08:00: [Firmware Bug]: ECAM area [mem 0xa8000000-0xa87fffff] not reserved in ACPI namespace [ 75.526671] acpi PNP0A08:00: can't get rc base address [ 75.526676] acpi PNP0A08:00: 0002:[bus 80-87] error -12 mapping ECAM
The FW on this board is 1.5 years old, and is not consistent with the MCFG quirks added to support ACPI for these almost-ecam hosts.
The point is that we would also like you to update the FW:
https://github.com/hisilicon/plinth-uefi/tree/master/4.16-IT21 UEFI_D0520180418.fd
Some instructions: https://github.com/open-estuary/estuary/blob/master/doc/UEFI_Manual.4D05.md
Let me know if any issues.
Thanks, John
The log is as below: [ 0.000000] Booting Linux on physical CPU 0x0000010000 [0x410fd082] [ 0.000000] Linux version 4.20.0-rc6-next-20181211 (joyx@htsatcamb-server) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05)) #48 SMP PREEMPT Tue Dec 11 16:57:30 GMT 2018 [ 0.000000] Machine model: Hisilicon Hip07 D05 Development Board [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.60 by EDK II [ 0.000000] efi: SMBIOS=0x3f050000 SMBIOS 3.0=0x39b00000 ACPI=0x39bd0000 ACPI 2.0=0x39bd0014 MEMATTR=0x3ccc4018 MEMRESERVE=0x31902e98 [ 0.000000] cma: Reserved 32 MiB at 0x000000003d000000 [ 0.000000] OF: NUMA: parsing numa-distance-map-v1 [ 0.000000] NUMA: Warning: invalid memblk node 4 [mem 0x1040000000-0x1ffbffffff] [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x0000041ffbffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x41febf98840-0x41febf99fff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000041ffbffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000031902fff] [ 0.000000] node 0: [mem 0x0000000031903000-0x0000000031906fff] [ 0.000000] node 0: [mem 0x0000000031907000-0x000000003999ffff] [ 0.000000] node 0: [mem 0x00000000399a0000-0x0000000039a3ffff] [ 0.000000] node 0: [mem 0x0000000039a40000-0x0000000039a8ffff] [ 0.000000] node 0: [mem 0x0000000039a90000-0x0000000039a9ffff] [ 0.000000] node 0: [mem 0x0000000039aa0000-0x0000000039aeffff] [ 0.000000] node 0: [mem 0x0000000039af0000-0x0000000039bbffff] [ 0.000000] node 0: [mem 0x0000000039bc0000-0x0000000039bdffff] [ 0.000000] node 0: [mem 0x0000000039be0000-0x000000003a05ffff] [ 0.000000] node 0: [mem 0x000000003a060000-0x000000003f04ffff] [ 0.000000] node 0: [mem 0x000000003f050000-0x000000003f07ffff] [ 0.000000] node 0: [mem 0x000000003f080000-0x000000003fbfffff] [ 0.000000] node 0: [mem 0x0000001040000000-0x0000001ffbffffff] [ 0.000000] node 0: [mem 0x0000041000000000-0x0000041ffbffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 148 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000041ffbffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x40c with crng_init=0 [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55704 r8192 d30312 u94208 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32996880 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/joyx/Image rdinit=/init acpi=off [ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] printk: log_buf_len total cpu_extra contributions: 258048 bytes [ 0.000000] printk: log_buf_len min size: 131072 bytes [ 0.000000] printk: log_buf_len: 524288 bytes [ 0.000000] printk: early log buf free: 126460(96%) [ 0.000000] software IO TLB: mapped [mem 0x359a0000-0x399a0000] (64MB) [ 0.000000] Memory: 131560596K/134082560K available (11068K kernel code, 1570K rwdata, 5332K rodata, 1408K init, 379K bss, 2489196K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: VLPI support, direct LPI support [ 0.000000] GICv3: CPU0: found redistributor 10000 region 0:0x000000004d100000 [ 0.000000] ITS [mem 0x4c000000-0x4c03ffff] [ 0.000000] ITS@0x000000004c000000: Using ITS number 0 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x000000004c000000: allocated 524288 Devices @41feac00000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x000000004c000000: allocated 65536 Virtual CPUs @41feb580000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x000000004c000000: allocated 512 Interrupt Collections @41feb52a000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0x6c000000-0x6c03ffff] [ 0.000000] ITS@0x000000006c000000: Using ITS number 1 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x000000006c000000: allocated 524288 Devices @41fea800000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x000000006c000000: allocated 65536 Virtual CPUs @41feb600000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x000000006c000000: allocated 512 Interrupt Collections @41feb52c000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0xc6000000-0xc603ffff] [ 0.000000] ITS@0x00000000c6000000: Using ITS number 2 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x00000000c6000000: allocated 524288 Devices @41fea400000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x00000000c6000000: allocated 65536 Virtual CPUs @41feb680000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x00000000c6000000: allocated 512 Interrupt Collections @41feb52d000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0x8c6000000-0x8c603ffff] [ 0.000000] ITS@0x00000008c6000000: Using ITS number 3 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x00000008c6000000: allocated 524288 Devices @41fea000000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x00000008c6000000: allocated 65536 Virtual CPUs @41feb700000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x00000008c6000000: allocated 512 Interrupt Collections @41feb52e000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0x4004c000000-0x4004c03ffff] [ 0.000000] ITS@0x000004004c000000: Using ITS number 4 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x000004004c000000: allocated 524288 Devices @41fe9c00000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x000004004c000000: allocated 65536 Virtual CPUs @41feb780000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x000004004c000000: allocated 512 Interrupt Collections @41feb52f000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0x4006c000000-0x4006c03ffff] [ 0.000000] ITS@0x000004006c000000: Using ITS number 5 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x000004006c000000: allocated 524288 Devices @41fe9400000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x000004006c000000: allocated 65536 Virtual CPUs @41fe9880000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x000004006c000000: allocated 512 Interrupt Collections @41fe9801000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0x400c6000000-0x400c603ffff] [ 0.000000] ITS@0x00000400c6000000: Using ITS number 6 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x00000400c6000000: allocated 524288 Devices @41fe9000000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x00000400c6000000: allocated 65536 Virtual CPUs @41fe9900000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x00000400c6000000: allocated 512 Interrupt Collections @41fe9802000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS [mem 0x408c6000000-0x408c603ffff] [ 0.000000] ITS@0x00000408c6000000: Using ITS number 7 [ 0.000000] GIC: enabling workaround for ITS: Hip07 erratum 161600802 [ 0.000000] ITS@0x00000408c6000000: allocated 524288 Devices @41fe8c00000 (flat, esz 8, psz 16K, shr 1) [ 0.000000] ITS@0x00000408c6000000: allocated 65536 Virtual CPUs @41fe9980000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] ITS@0x00000408c6000000: allocated 512 Interrupt Collections @41fe9803000 (flat, esz 8, psz 4K, shr 1) [ 0.000000] GICv3: using LPI property table @0x0000041fe9840000 [ 0.000000] ITS: Using DirectLPI for VPE invalidation [ 0.000000] ITS: Enabling GICv4 support [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000041fe9850000 [ 0.000000] arch_timer: cp15 timer(s) running at 50.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns [ 0.000001] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns [ 0.000159] Console: colour dummy device 80x25 [ 0.000446] printk: console [tty0] enabled [ 0.000499] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000) [ 0.000507] pid_max: default: 65536 minimum: 512 [ 0.000562] LSM: Security Framework initializing [ 0.035969] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.053360] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.053997] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.054584] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.054838] *** VALIDATE proc *** [ 0.054976] *** VALIDATE cgroup1 *** [ 0.054981] *** VALIDATE cgroup2 *** [ 0.096093] ASID allocator initialised with 32768 entries [ 0.104084] rcu: Hierarchical SRCU implementation. [ 0.112134] Platform MSI: interrupt-controller@4c000000 domain created [ 0.112148] Platform MSI: interrupt-controller@6c000000 domain created [ 0.112157] Platform MSI: interrupt-controller@c6000000 domain created [ 0.112165] Platform MSI: interrupt-controller@8,c6000000 domain created [ 0.112172] Platform MSI: interrupt-controller@400,4c000000 domain created [ 0.112179] Platform MSI: interrupt-controller@400,6c000000 domain created [ 0.112187] Platform MSI: interrupt-controller@400,c6000000 domain created [ 0.112194] Platform MSI: interrupt-controller@408,c6000000 domain created [ 0.112246] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@4c000000 domain created [ 0.112255] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@6c000000 domain created [ 0.112262] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@c6000000 domain created [ 0.112271] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@8,c6000000 domain created [ 0.112279] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@400,4c000000 domain created [ 0.112287] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@400,6c000000 domain created [ 0.112296] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@400,c6000000 domain created [ 0.112304] PCI/MSI: /interrupt-controller@4d000000/interrupt-controller@408,c6000000 domain created [ 0.112793] Remapping and enabling EFI services. [ 0.120095] smp: Bringing up secondary CPUs ... [ 0.202700] Detected PIPT I-cache on CPU1 [ 0.202714] GICv3: CPU1: found redistributor 10001 region 0:0x000000004d140000 [ 0.202720] GICv3: CPU1: using allocated LPI pending table @0x0000041fe9860000 [ 0.202857] CPU1: Booted secondary processor 0x0000010001 [0x410fd082] [ 0.285325] Detected PIPT I-cache on CPU2 [ 0.285332] GICv3: CPU2: found redistributor 10002 region 0:0x000000004d180000 [ 0.285336] GICv3: CPU2: using allocated LPI pending table @0x0000041fe9870000 [ 0.285442] CPU2: Booted secondary processor 0x0000010002 [0x410fd082] [ 0.367951] Detected PIPT I-cache on CPU3 [ 0.367958] GICv3: CPU3: found redistributor 10003 region 0:0x000000004d1c0000 [ 0.367963] GICv3: CPU3: using allocated LPI pending table @0x0000041fe9a00000 [ 0.368065] CPU3: Booted secondary processor 0x0000010003 [0x410fd082] [ 0.450582] Detected PIPT I-cache on CPU4 [ 0.450591] GICv3: CPU4: found redistributor 10100 region 0:0x000000004d200000 [ 0.450596] GICv3: CPU4: using allocated LPI pending table @0x0000041fe9a10000 [ 0.450700] CPU4: Booted secondary processor 0x0000010100 [0x410fd082] [ 0.533206] Detected PIPT I-cache on CPU5 [ 0.533213] GICv3: CPU5: found redistributor 10101 region 0:0x000000004d240000 [ 0.533218] GICv3: CPU5: using allocated LPI pending table @0x0000041fe9a20000 [ 0.533321] CPU5: Booted secondary processor 0x0000010101 [0x410fd082] [ 0.615835] Detected PIPT I-cache on CPU6 [ 0.615842] GICv3: CPU6: found redistributor 10102 region 0:0x000000004d280000 [ 0.615847] GICv3: CPU6: using allocated LPI pending table @0x0000041fe9a30000 [ 0.615952] CPU6: Booted secondary processor 0x0000010102 [0x410fd082] [ 0.698460] Detected PIPT I-cache on CPU7 [ 0.698469] GICv3: CPU7: found redistributor 10103 region 0:0x000000004d2c0000 [ 0.698473] GICv3: CPU7: using allocated LPI pending table @0x0000041fe9a40000 [ 0.698575] CPU7: Booted secondary processor 0x0000010103 [0x410fd082] [ 0.781090] Detected PIPT I-cache on CPU8 [ 0.781099] GICv3: CPU8: found redistributor 10200 region 0:0x000000004d300000 [ 0.781104] GICv3: CPU8: using allocated LPI pending table @0x0000041fe9a50000 [ 0.781211] CPU8: Booted secondary processor 0x0000010200 [0x410fd082] [ 0.863715] Detected PIPT I-cache on CPU9 [ 0.863723] GICv3: CPU9: found redistributor 10201 region 0:0x000000004d340000 [ 0.863728] GICv3: CPU9: using allocated LPI pending table @0x0000041fe9a60000 [ 0.863831] CPU9: Booted secondary processor 0x0000010201 [0x410fd082] [ 0.946342] Detected PIPT I-cache on CPU10 [ 0.946350] GICv3: CPU10: found redistributor 10202 region 0:0x000000004d380000 [ 0.946354] GICv3: CPU10: using allocated LPI pending table @0x0000041fe9a70000 [ 0.946458] CPU10: Booted secondary processor 0x0000010202 [0x410fd082] [ 1.028968] Detected PIPT I-cache on CPU11 [ 1.028976] GICv3: CPU11: found redistributor 10203 region 0:0x000000004d3c0000 [ 1.028981] GICv3: CPU11: using allocated LPI pending table @0x0000041fe9a80000 [ 1.029084] CPU11: Booted secondary processor 0x0000010203 [0x410fd082] [ 1.111596] Detected PIPT I-cache on CPU12 [ 1.111605] GICv3: CPU12: found redistributor 10300 region 0:0x000000004d400000 [ 1.111611] GICv3: CPU12: using allocated LPI pending table @0x0000041fe9a90000 [ 1.111717] CPU12: Booted secondary processor 0x0000010300 [0x410fd082] [ 1.194222] Detected PIPT I-cache on CPU13 [ 1.194230] GICv3: CPU13: found redistributor 10301 region 0:0x000000004d440000 [ 1.194235] GICv3: CPU13: using allocated LPI pending table @0x0000041fe9aa0000 [ 1.194339] CPU13: Booted secondary processor 0x0000010301 [0x410fd082] [ 1.276850] Detected PIPT I-cache on CPU14 [ 1.276858] GICv3: CPU14: found redistributor 10302 region 0:0x000000004d480000 [ 1.276862] GICv3: CPU14: using allocated LPI pending table @0x0000041fe9ab0000 [ 1.276967] CPU14: Booted secondary processor 0x0000010302 [0x410fd082] [ 1.359476] Detected PIPT I-cache on CPU15 [ 1.359484] GICv3: CPU15: found redistributor 10303 region 0:0x000000004d4c0000 [ 1.359489] GICv3: CPU15: using allocated LPI pending table @0x0000041fe9ac0000 [ 1.359590] CPU15: Booted secondary processor 0x0000010303 [0x410fd082] [ 1.441762] Detected PIPT I-cache on CPU16 [ 1.441775] GICv3: CPU16: found redistributor 30000 region 1:0x000000006d100000 [ 1.441781] GICv3: CPU16: using allocated LPI pending table @0x0000041fe9ad0000 [ 1.441930] CPU16: Booted secondary processor 0x0000030000 [0x410fd082] [ 1.524388] Detected PIPT I-cache on CPU17 [ 1.524397] GICv3: CPU17: found redistributor 30001 region 1:0x000000006d140000 [ 1.524402] GICv3: CPU17: using allocated LPI pending table @0x0000041fe9ae0000 [ 1.524545] CPU17: Booted secondary processor 0x0000030001 [0x410fd082] [ 1.607016] Detected PIPT I-cache on CPU18 [ 1.607026] GICv3: CPU18: found redistributor 30002 region 1:0x000000006d180000 [ 1.607031] GICv3: CPU18: using allocated LPI pending table @0x0000041fe9af0000 [ 1.607175] CPU18: Booted secondary processor 0x0000030002 [0x410fd082] [ 1.689644] Detected PIPT I-cache on CPU19 [ 1.689654] GICv3: CPU19: found redistributor 30003 region 1:0x000000006d1c0000 [ 1.689659] GICv3: CPU19: using allocated LPI pending table @0x0000041fe9b00000 [ 1.689802] CPU19: Booted secondary processor 0x0000030003 [0x410fd082] [ 1.772276] Detected PIPT I-cache on CPU20 [ 1.772289] GICv3: CPU20: found redistributor 30100 region 1:0x000000006d200000 [ 1.772296] GICv3: CPU20: using allocated LPI pending table @0x0000041fe9b10000 [ 1.772445] CPU20: Booted secondary processor 0x0000030100 [0x410fd082] [ 1.854901] Detected PIPT I-cache on CPU21 [ 1.854911] GICv3: CPU21: found redistributor 30101 region 1:0x000000006d240000 [ 1.854916] GICv3: CPU21: using allocated LPI pending table @0x0000041fe9b20000 [ 1.855059] CPU21: Booted secondary processor 0x0000030101 [0x410fd082] [ 1.937530] Detected PIPT I-cache on CPU22 [ 1.937539] GICv3: CPU22: found redistributor 30102 region 1:0x000000006d280000 [ 1.937544] GICv3: CPU22: using allocated LPI pending table @0x0000041fe9b30000 [ 1.937688] CPU22: Booted secondary processor 0x0000030102 [0x410fd082] [ 2.020158] Detected PIPT I-cache on CPU23 [ 2.020169] GICv3: CPU23: found redistributor 30103 region 1:0x000000006d2c0000 [ 2.020173] GICv3: CPU23: using allocated LPI pending table @0x0000041fe9b40000 [ 2.020315] CPU23: Booted secondary processor 0x0000030103 [0x410fd082] [ 2.102789] Detected PIPT I-cache on CPU24 [ 2.102802] GICv3: CPU24: found redistributor 30200 region 1:0x000000006d300000 [ 2.102810] GICv3: CPU24: using allocated LPI pending table @0x0000041fe9b50000 [ 2.102960] CPU24: Booted secondary processor 0x0000030200 [0x410fd082] [ 2.185415] Detected PIPT I-cache on CPU25 [ 2.185426] GICv3: CPU25: found redistributor 30201 region 1:0x000000006d340000 [ 2.185430] GICv3: CPU25: using allocated LPI pending table @0x0000041fe9b60000 [ 2.185572] CPU25: Booted secondary processor 0x0000030201 [0x410fd082] [ 2.268043] Detected PIPT I-cache on CPU26 [ 2.268054] GICv3: CPU26: found redistributor 30202 region 1:0x000000006d380000 [ 2.268059] GICv3: CPU26: using allocated LPI pending table @0x0000041fe9b70000 [ 2.268203] CPU26: Booted secondary processor 0x0000030202 [0x410fd082] [ 2.350672] Detected PIPT I-cache on CPU27 [ 2.350683] GICv3: CPU27: found redistributor 30203 region 1:0x000000006d3c0000 [ 2.350688] GICv3: CPU27: using allocated LPI pending table @0x0000041fe9b80000 [ 2.350830] CPU27: Booted secondary processor 0x0000030203 [0x410fd082] [ 2.433304] Detected PIPT I-cache on CPU28 [ 2.433317] GICv3: CPU28: found redistributor 30300 region 1:0x000000006d400000 [ 2.433324] GICv3: CPU28: using allocated LPI pending table @0x0000041fe9b90000 [ 2.433474] CPU28: Booted secondary processor 0x0000030300 [0x410fd082] [ 2.515930] Detected PIPT I-cache on CPU29 [ 2.515940] GICv3: CPU29: found redistributor 30301 region 1:0x000000006d440000 [ 2.515945] GICv3: CPU29: using allocated LPI pending table @0x0000041fe9ba0000 [ 2.516088] CPU29: Booted secondary processor 0x0000030301 [0x410fd082] [ 2.598559] Detected PIPT I-cache on CPU30 [ 2.598570] GICv3: CPU30: found redistributor 30302 region 1:0x000000006d480000 [ 2.598574] GICv3: CPU30: using allocated LPI pending table @0x0000041fe9bb0000 [ 2.598718] CPU30: Booted secondary processor 0x0000030302 [0x410fd082] [ 2.681189] Detected PIPT I-cache on CPU31 [ 2.681200] GICv3: CPU31: found redistributor 30303 region 1:0x000000006d4c0000 [ 2.681205] GICv3: CPU31: using allocated LPI pending table @0x0000041fe9bc0000 [ 2.681349] CPU31: Booted secondary processor 0x0000030303 [0x410fd082] [ 2.763503] Detected PIPT I-cache on CPU32 [ 2.763540] GICv3: CPU32: found redistributor 50000 region 2:0x000004004d100000 [ 2.763557] GICv3: CPU32: using allocated LPI pending table @0x0000041fe9bd0000 [ 2.763709] CPU32: Booted secondary processor 0x0000050000 [0x410fd082] [ 2.846121] Detected PIPT I-cache on CPU33 [ 2.846143] GICv3: CPU33: found redistributor 50001 region 2:0x000004004d140000 [ 2.846148] GICv3: CPU33: using allocated LPI pending table @0x0000041fe9be0000 [ 2.846252] CPU33: Booted secondary processor 0x0000050001 [0x410fd082] [ 2.928764] Detected PIPT I-cache on CPU34 [ 2.928786] GICv3: CPU34: found redistributor 50002 region 2:0x000004004d180000 [ 2.928791] GICv3: CPU34: using allocated LPI pending table @0x0000041fe9bf0000 [ 2.928896] CPU34: Booted secondary processor 0x0000050002 [0x410fd082] [ 3.011405] Detected PIPT I-cache on CPU35 [ 3.011427] GICv3: CPU35: found redistributor 50003 region 2:0x000004004d1c0000 [ 3.011432] GICv3: CPU35: using allocated LPI pending table @0x0000041fe8800000 [ 3.011536] CPU35: Booted secondary processor 0x0000050003 [0x410fd082] [ 3.094049] Detected PIPT I-cache on CPU36 [ 3.094072] GICv3: CPU36: found redistributor 50100 region 2:0x000004004d200000 [ 3.094078] GICv3: CPU36: using allocated LPI pending table @0x0000041fe8810000 [ 3.094184] CPU36: Booted secondary processor 0x0000050100 [0x410fd082] [ 3.176690] Detected PIPT I-cache on CPU37 [ 3.176712] GICv3: CPU37: found redistributor 50101 region 2:0x000004004d240000 [ 3.176717] GICv3: CPU37: using allocated LPI pending table @0x0000041fe8820000 [ 3.176820] CPU37: Booted secondary processor 0x0000050101 [0x410fd082] [ 3.259335] Detected PIPT I-cache on CPU38 [ 3.259357] GICv3: CPU38: found redistributor 50102 region 2:0x000004004d280000 [ 3.259362] GICv3: CPU38: using allocated LPI pending table @0x0000041fe8830000 [ 3.259465] CPU38: Booted secondary processor 0x0000050102 [0x410fd082] [ 3.341975] Detected PIPT I-cache on CPU39 [ 3.341998] GICv3: CPU39: found redistributor 50103 region 2:0x000004004d2c0000 [ 3.342003] GICv3: CPU39: using allocated LPI pending table @0x0000041fe8840000 [ 3.342107] CPU39: Booted secondary processor 0x0000050103 [0x410fd082] [ 3.424622] Detected PIPT I-cache on CPU40 [ 3.424646] GICv3: CPU40: found redistributor 50200 region 2:0x000004004d300000 [ 3.424652] GICv3: CPU40: using allocated LPI pending table @0x0000041fe8850000 [ 3.424757] CPU40: Booted secondary processor 0x0000050200 [0x410fd082] [ 3.507263] Detected PIPT I-cache on CPU41 [ 3.507286] GICv3: CPU41: found redistributor 50201 region 2:0x000004004d340000 [ 3.507290] GICv3: CPU41: using allocated LPI pending table @0x0000041fe8860000 [ 3.507394] CPU41: Booted secondary processor 0x0000050201 [0x410fd082] [ 3.589907] Detected PIPT I-cache on CPU42 [ 3.589930] GICv3: CPU42: found redistributor 50202 region 2:0x000004004d380000 [ 3.589935] GICv3: CPU42: using allocated LPI pending table @0x0000041fe8870000 [ 3.590040] CPU42: Booted secondary processor 0x0000050202 [0x410fd082] [ 3.672547] Detected PIPT I-cache on CPU43 [ 3.672570] GICv3: CPU43: found redistributor 50203 region 2:0x000004004d3c0000 [ 3.672575] GICv3: CPU43: using allocated LPI pending table @0x0000041fe8880000 [ 3.672680] CPU43: Booted secondary processor 0x0000050203 [0x410fd082] [ 3.755193] Detected PIPT I-cache on CPU44 [ 3.755218] GICv3: CPU44: found redistributor 50300 region 2:0x000004004d400000 [ 3.755225] GICv3: CPU44: using allocated LPI pending table @0x0000041fe8890000 [ 3.755331] CPU44: Booted secondary processor 0x0000050300 [0x410fd082] [ 3.837834] Detected PIPT I-cache on CPU45 [ 3.837857] GICv3: CPU45: found redistributor 50301 region 2:0x000004004d440000 [ 3.837862] GICv3: CPU45: using allocated LPI pending table @0x0000041fe88a0000 [ 3.837965] CPU45: Booted secondary processor 0x0000050301 [0x410fd082] [ 3.920478] Detected PIPT I-cache on CPU46 [ 3.920501] GICv3: CPU46: found redistributor 50302 region 2:0x000004004d480000 [ 3.920506] GICv3: CPU46: using allocated LPI pending table @0x0000041fe88b0000 [ 3.920610] CPU46: Booted secondary processor 0x0000050302 [0x410fd082] [ 4.003121] Detected PIPT I-cache on CPU47 [ 4.003144] GICv3: CPU47: found redistributor 50303 region 2:0x000004004d4c0000 [ 4.003149] GICv3: CPU47: using allocated LPI pending table @0x0000041fe88c0000 [ 4.003254] CPU47: Booted secondary processor 0x0000050303 [0x410fd082] [ 4.085421] Detected PIPT I-cache on CPU48 [ 4.085451] GICv3: CPU48: found redistributor 70000 region 3:0x000004006d100000 [ 4.085459] GICv3: CPU48: using allocated LPI pending table @0x0000041fe88d0000 [ 4.085605] CPU48: Booted secondary processor 0x0000070000 [0x410fd082] [ 4.168060] Detected PIPT I-cache on CPU49 [ 4.168086] GICv3: CPU49: found redistributor 70001 region 3:0x000004006d140000 [ 4.168092] GICv3: CPU49: using allocated LPI pending table @0x0000041fe88e0000 [ 4.168232] CPU49: Booted secondary processor 0x0000070001 [0x410fd082] [ 4.250705] Detected PIPT I-cache on CPU50 [ 4.250731] GICv3: CPU50: found redistributor 70002 region 3:0x000004006d180000 [ 4.250736] GICv3: CPU50: using allocated LPI pending table @0x0000041fe88f0000 [ 4.250878] CPU50: Booted secondary processor 0x0000070002 [0x410fd082] [ 4.333348] Detected PIPT I-cache on CPU51 [ 4.333374] GICv3: CPU51: found redistributor 70003 region 3:0x000004006d1c0000 [ 4.333380] GICv3: CPU51: using allocated LPI pending table @0x0000041fe8900000 [ 4.333522] CPU51: Booted secondary processor 0x0000070003 [0x410fd082] [ 4.415997] Detected PIPT I-cache on CPU52 [ 4.416027] GICv3: CPU52: found redistributor 70100 region 3:0x000004006d200000 [ 4.416035] GICv3: CPU52: using allocated LPI pending table @0x0000041fe8910000 [ 4.416184] CPU52: Booted secondary processor 0x0000070100 [0x410fd082] [ 4.498638] Detected PIPT I-cache on CPU53 [ 4.498664] GICv3: CPU53: found redistributor 70101 region 3:0x000004006d240000 [ 4.498669] GICv3: CPU53: using allocated LPI pending table @0x0000041fe8920000 [ 4.498810] CPU53: Booted secondary processor 0x0000070101 [0x410fd082] [ 4.581284] Detected PIPT I-cache on CPU54 [ 4.581311] GICv3: CPU54: found redistributor 70102 region 3:0x000004006d280000 [ 4.581316] GICv3: CPU54: using allocated LPI pending table @0x0000041fe8930000 [ 4.581457] CPU54: Booted secondary processor 0x0000070102 [0x410fd082] [ 4.663927] Detected PIPT I-cache on CPU55 [ 4.663954] GICv3: CPU55: found redistributor 70103 region 3:0x000004006d2c0000 [ 4.663959] GICv3: CPU55: using allocated LPI pending table @0x0000041fe8940000 [ 4.664099] CPU55: Booted secondary processor 0x0000070103 [0x410fd082] [ 4.746575] Detected PIPT I-cache on CPU56 [ 4.746604] GICv3: CPU56: found redistributor 70200 region 3:0x000004006d300000 [ 4.746613] GICv3: CPU56: using allocated LPI pending table @0x0000041fe8950000 [ 4.746760] CPU56: Booted secondary processor 0x0000070200 [0x410fd082] [ 4.829215] Detected PIPT I-cache on CPU57 [ 4.829241] GICv3: CPU57: found redistributor 70201 region 3:0x000004006d340000 [ 4.829247] GICv3: CPU57: using allocated LPI pending table @0x0000041fe8960000 [ 4.829388] CPU57: Booted secondary processor 0x0000070201 [0x410fd082] [ 4.911861] Detected PIPT I-cache on CPU58 [ 4.911888] GICv3: CPU58: found redistributor 70202 region 3:0x000004006d380000 [ 4.911894] GICv3: CPU58: using allocated LPI pending table @0x0000041fe8970000 [ 4.912034] CPU58: Booted secondary processor 0x0000070202 [0x410fd082] [ 4.994506] Detected PIPT I-cache on CPU59 [ 4.994532] GICv3: CPU59: found redistributor 70203 region 3:0x000004006d3c0000 [ 4.994538] GICv3: CPU59: using allocated LPI pending table @0x0000041fe8980000 [ 4.994678] CPU59: Booted secondary processor 0x0000070203 [0x410fd082] [ 5.077154] Detected PIPT I-cache on CPU60 [ 5.077184] GICv3: CPU60: found redistributor 70300 region 3:0x000004006d400000 [ 5.077194] GICv3: CPU60: using allocated LPI pending table @0x0000041fe8990000 [ 5.077341] CPU60: Booted secondary processor 0x0000070300 [0x410fd082] [ 5.159795] Detected PIPT I-cache on CPU61 [ 5.159822] GICv3: CPU61: found redistributor 70301 region 3:0x000004006d440000 [ 5.159827] GICv3: CPU61: using allocated LPI pending table @0x0000041fe89a0000 [ 5.159969] CPU61: Booted secondary processor 0x0000070301 [0x410fd082] [ 5.242443] Detected PIPT I-cache on CPU62 [ 5.242470] GICv3: CPU62: found redistributor 70302 region 3:0x000004006d480000 [ 5.242475] GICv3: CPU62: using allocated LPI pending table @0x0000041fe89b0000 [ 5.242618] CPU62: Booted secondary processor 0x0000070302 [0x410fd082] [ 5.325086] Detected PIPT I-cache on CPU63 [ 5.325113] GICv3: CPU63: found redistributor 70303 region 3:0x000004006d4c0000 [ 5.325118] GICv3: CPU63: using allocated LPI pending table @0x0000041fe89c0000 [ 5.325258] CPU63: Booted secondary processor 0x0000070303 [0x410fd082] [ 5.325338] smp: Brought up 1 node, 64 CPUs [ 5.325949] SMP: Total of 64 processors activated. [ 5.325953] CPU features: detected: GIC system register CPU interface [ 5.325957] CPU features: detected: 32-bit EL0 Support [ 5.325962] CPU features: detected: CRC32 instructions [ 37.857913] CPU: All CPU(s) started at EL2 [ 37.858056] alternatives: patching kernel code [ 37.859195] devtmpfs: initialized [ 37.861655] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 37.861850] futex hash table entries: 16384 (order: 8, 1048576 bytes) [ 37.863258] pinctrl core: initialized pinctrl subsystem [ 37.863848] SMBIOS 3.0.0 present. [ 37.863857] DMI: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT17 Nemo 2.0 RC0 10/05/2018 [ 37.864066] NET: Registered protocol family 16 [ 37.864914] audit: initializing netlink subsys (disabled) [ 37.865008] audit: type=2000 audit(3.660:1): state=initialized audit_enabled=0 res=1 [ 37.865530] cpuidle: using governor menu [ 37.865723] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) [ 37.865729] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 37.866862] DMA: preallocated 256 KiB pool for atomic allocations [ 37.867315] Serial: AMBA PL011 UART driver [ 37.878295] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 37.878303] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 37.878308] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 37.878312] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 37.878720] cryptd: max_cpu_qlen set to 1000 [ 37.879341] ACPI: Interpreter disabled. [ 37.879892] vgaarb: loaded [ 37.880053] SCSI subsystem initialized [ 37.880341] usbcore: registered new interface driver usbfs [ 37.880358] usbcore: registered new interface driver hub [ 37.880554] usbcore: registered new device driver usb [ 37.880801] pps_core: LinuxPPS API ver. 1 registered [ 37.880810] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 37.880821] PTP clock support registered [ 37.880865] EDAC MC: Ver: 3.0.0 [ 37.881061] Registered efivars operations [ 37.881612] Advanced Linux Sound Architecture Driver Initialized. [ 37.882021] clocksource: Switched to clocksource arch_sys_counter [ 37.882175] VFS: Disk quotas dquot_6.6.0 [ 37.882203] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 37.882226] *** VALIDATE hugetlbfs *** [ 37.882298] pnp: PnP ACPI: disabled [ 37.884713] NET: Registered protocol family 2 [ 37.885270] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes) [ 37.885997] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 37.887227] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 37.888046] TCP: Hash tables configured (established 524288 bind 65536) [ 37.888455] UDP hash table entries: 65536 (order: 9, 2097152 bytes) [ 37.889229] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes) [ 37.889975] NET: Registered protocol family 1 [ 37.890252] RPC: Registered named UNIX socket transport module. [ 37.890256] RPC: Registered udp transport module. [ 37.890260] RPC: Registered tcp transport module. [ 37.890264] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 37.890331] Unpacking initramfs... [ 38.431501] Freeing initrd memory: 29988K [ 38.434774] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 38.435078] kvm [1]: 8-bit VMID [ 38.435083] kvm [1]: IPA Size Limit: 44bits [ 38.435702] kvm [1]: GICv4 support disabled [ 38.435707] kvm [1]: vgic-v2@fe020000 [ 38.435735] kvm [1]: GIC system register CPU interface enabled [ 38.436492] kvm [1]: vgic interrupt IRQ1 [ 38.437216] kvm [1]: Hyp mode initialized successfully [ 38.487671] Initialise system trusted keyrings [ 38.487769] workingset: timestamp_bits=44 max_order=25 bucket_order=0 [ 38.490524] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 38.490949] NFS: Registering the id_resolver key type [ 38.490958] Key type id_resolver registered [ 38.490962] Key type id_legacy registered [ 38.490969] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 38.491017] 9p: Installing v9fs 9p2000 file system support [ 38.509723] Key type asymmetric registered [ 38.509730] Asymmetric key parser 'x509' registered [ 38.509749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 38.509755] io scheduler mq-deadline registered [ 38.509759] io scheduler kyber registered [ 38.512628] hisi-lpc a01b0000.isa: registered range [0x0000000000ffbfff - 0x0000000000ffffff] [ 38.515403] hisi-pcie-almost-ecam af800000.pcie: host bridge /soc/pcie@a00a0000 ranges: [ 38.515420] hisi-pcie-almost-ecam af800000.pcie: MEM 0xa8000000..0xaf7effff -> 0xa8000000 [ 38.515429] hisi-pcie-almost-ecam af800000.pcie: IO 0xaf7f0000..0xaf7fffff -> 0x00000000 [ 38.515438] hisi-pcie-almost-ecam af800000.pcie: resource collision: [io 0x0000-0xffff] conflicts with IPMI Address 1 [io 0x00e4] [ 38.515447] hisi-pcie-almost-ecam: probe of af800000.pcie failed with error -16 [ 38.515817] EINJ: ACPI disabled. [ 38.519589] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 38.520402] SuperH (H)SCI(F) driver initialized [ 38.520545] msm_serial: driver initialized [ 38.520775] arm-smmu-v3 d0040000.smmu_alg: option hisilicon,broken-prefetch-cmd [ 38.520857] arm-smmu-v3 d0040000.smmu_alg: ias 44-bit, oas 44-bit (features 0x00000f0d) [ 38.524363] arm-smmu-v3 8d0040000.smmu_alg: option hisilicon,broken-prefetch-cmd [ 38.524449] arm-smmu-v3 8d0040000.smmu_alg: ias 44-bit, oas 44-bit (features 0x00000f0d) [ 38.527710] arm-smmu-v3 400d0040000.smmu_alg: option hisilicon,broken-prefetch-cmd [ 38.527793] arm-smmu-v3 400d0040000.smmu_alg: ias 44-bit, oas 44-bit (features 0x00000f0d) [ 38.531165] arm-smmu-v3 408d0040000.smmu_alg: option hisilicon,broken-prefetch-cmd [ 38.531268] arm-smmu-v3 408d0040000.smmu_alg: ias 44-bit, oas 44-bit (features 0x00000f0d) [ 38.551308] loop: module loaded [ 38.564642] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.564728] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.564808] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.564887] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.564965] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565045] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565124] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565204] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565282] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565362] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565441] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565519] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565598] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565677] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565755] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565834] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565914] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.565994] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.566080] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.566160] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.566238] cma: cma_alloc: alloc failed, req-size: 33 pages, ret: -12 [ 38.566371] cma: cma_alloc: alloc failed, req-size: 128 pages, ret: -12 [ 38.566564] cma: cma_alloc: alloc failed, req-size: 1024 pages, ret: -12 [ 38.569166] scsi host0: hisi_sas_v2_hw [ 39.198633] hisi_sas_v2_hw a2000000.sas: phyup: phy0 link_rate=11 [ 39.198653] hisi_sas_v2_hw a2000000.sas: phyup: phy1 link_rate=11 [ 39.203631] hisi_sas_v2_hw a2000000.sas: phyup: phy2 link_rate=11 [ 39.203641] hisi_sas_v2_hw a2000000.sas: phyup: phy3 link_rate=11 [ 39.203649] hisi_sas_v2_hw a2000000.sas: phyup: phy4 link_rate=11 [ 39.203659] hisi_sas_v2_hw a2000000.sas: phyup: phy5 link_rate=11 [ 39.203668] hisi_sas_v2_hw a2000000.sas: phyup: phy6 link_rate=11 [ 39.203678] hisi_sas_v2_hw a2000000.sas: phyup: phy7 link_rate=11 [ 39.210342] hisi_sas_v2_hw a2000000.sas: dev[0:2] found [ 39.213623] hisi_sas_v2_hw a2000000.sas: dev[2:5] found [ 39.219415] hisi_sas_v2_hw a2000000.sas: dev[1:1] found [ 39.226032] hisi_sas_v2_hw a2000000.sas: dev[3:1] found [ 39.232668] hisi_sas_v2_hw a2000000.sas: dev[4:1] found [ 39.232785] hisi_sas_v2_hw a2000000.sas: dev[5:1] found [ 39.239415] hisi_sas_v2_hw a2000000.sas: dev[6:1] found [ 39.246052] hisi_sas_v2_hw a2000000.sas: dev[7:1] found [ 39.252660] hisi_sas_v2_hw a2000000.sas: dev[8:1] found [ 39.259334] hisi_sas_v2_hw a2000000.sas: dev[9:1] found [ 39.259520] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 39.420013] ata1.00: ATA-8: HGST HUS724040ALA640, MFAOA8B0, max UDMA/133 [ 39.420027] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32) [ 39.421818] ata1.00: configured for UDMA/133 [ 39.421843] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 39.432874] scsi 0:0:0:0: Direct-Access ATA HGST HUS724040AL A8B0 PQ: 0 ANSI: 5 [ 39.433185] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 39.433215] sd 0:0:0:0: [sda] Write Protect is off [ 39.433254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 39.471281] scsi 0:0:1:0: Direct-Access SanDisk LT0200MO P404 PQ: 0 ANSI: 6 [ 39.486941] sda: sda1 [ 39.487973] sd 0:0:0:0: [sda] Attached SCSI disk [ 39.769843] scsi 0:0:2:0: Direct-Access SanDisk LT0200MO P404 PQ: 0 ANSI: 6 [ 39.947275] sd 0:0:1:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 39.989339] sd 0:0:1:0: [sdb] Write Protect is off [ 40.031685] scsi 0:0:3:0: Direct-Access HGST HUC156030CSS200 A3F0 PQ: 0 ANSI: 6 [ 40.034071] sd 0:0:3:0: [sdd] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 40.035291] sd 0:0:3:0: [sdd] Write Protect is off [ 40.037640] sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 40.059425] sd 0:0:3:0: [sdd] Attached SCSI disk [ 40.071332] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 40.071380] scsi 0:0:4:0: Direct-Access SanDisk LT0200MO P404 PQ: 0 ANSI: 6 [ 40.245865] sd 0:0:2:0: [sdc] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 40.287947] sd 0:0:2:0: [sdc] Write Protect is off [ 40.369964] sd 0:0:2:0: [sdc] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 40.370017] scsi 0:0:5:0: Direct-Access SanDisk LT0200MO P404 PQ: 0 ANSI: 6 [ 40.547427] sd 0:0:4:0: [sde] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 40.589465] sd 0:0:4:0: [sde] Write Protect is off [ 40.668789] scsi 0:0:6:0: Direct-Access SanDisk LT0200MO P404 PQ: 0 ANSI: 6 [ 40.671583] sd 0:0:4:0: [sde] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 40.734152] sdb: sdb1 sdb2 [ 40.846100] sd 0:0:5:0: [sdf] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 40.888148] sd 0:0:5:0: [sdf] Write Protect is off [ 40.893800] sd 0:0:6:0: [sdg] Disabling DIF Type 1 protection [ 40.967256] scsi 0:0:7:0: Direct-Access SanDisk LT0200MO P404 PQ: 0 ANSI: 6 [ 40.970171] sd 0:0:5:0: [sdf] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 41.008257] random: fast init done [ 41.032637] sdc: sdc1 sdc2 sdc3 [ 41.144708] sd 0:0:6:0: [sdg] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 41.186749] sd 0:0:6:0: [sdg] Write Protect is off [ 41.229168] scsi 0:0:8:0: Enclosure 12G SAS Expander RevB PQ: 0 ANSI: 6 [ 41.229274] scsi 0:0:8:0: Power-on or device reset occurred [ 41.231546] libphy: Fixed MDIO Bus: probed [ 41.231688] tun: Universal TUN/TAP device driver, 1.6 [ 41.231990] thunder_xcv, ver 1.0 [ 41.232009] thunder_bgx, ver 1.0 [ 41.232026] nicpf, ver 1.0 [ 41.268742] sd 0:0:6:0: [sdg] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 41.306280] sd 0:0:1:0: [sdb] Attached SCSI disk [ 41.334505] sde: sde1 sde2 sde3 [ 41.443959] sd 0:0:7:0: [sdh] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 41.486007] sd 0:0:7:0: [sdh] Write Protect is off [ 41.568030] sd 0:0:7:0: [sdh] Write cache: disabled, read cache: disabled, supports DPO and FUA [ 41.590426] mdio_bus Mii-603c0000.mdio: MDIO reset fail [ 41.590432] libphy: Hisilicon MII Bus: probed [ 41.604566] sd 0:0:2:0: [sdc] Attached SCSI disk [ 41.632812] sdf: sdf1 sdf2 sdf3 [ 41.906402] sd 0:0:4:0: [sde] Attached SCSI disk [ 42.204683] sd 0:0:5:0: [sdf] Attached SCSI disk [ 42.231450] sdh: sdh1 sdh2 [ 42.382819] hns-nic soc:ethernet@4: No valid mac, use random mac a2:04:2d:5a:18:6a [ 42.388328] hns-nic soc:ethernet@4 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 256 [ 42.388928] hns-nic soc:ethernet@5: No valid mac, use random mac 26:65:e4:af:9c:85 [ 42.394990] hns-nic soc:ethernet@0: No valid mac, use random mac 1e:86:a1:67:3c:9f [ 42.401030] hns-nic soc:ethernet@1: No valid mac, use random mac ce:88:68:ba:1d:9c [ 42.406949] hclge is initializing [ 42.406956] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 42.406960] hns3: Copyright (c) 2017 Huawei Corporation. [ 42.406998] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 42.407002] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 42.407023] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 42.407027] igb: Copyright (c) 2007-2014 Intel Corporation. [ 42.407047] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 42.407052] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 42.407240] sky2: driver version 1.30 [ 42.407528] VFIO - User Level meta-driver version: 0.3 [ 42.408087] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 42.408092] ehci-pci: EHCI PCI platform driver [ 42.408108] ehci-platform: EHCI generic platform driver [ 42.408202] ehci-platform a7020000.ehci: EHCI Host Controller [ 42.408212] ehci-platform a7020000.ehci: new USB bus registered, assigned bus number 1 [ 42.408439] ehci-platform a7020000.ehci: irq 339, io mem 0xa7020000 [ 42.422015] ehci-platform a7020000.ehci: USB 2.0 started, EHCI 1.00 [ 42.422222] hub 1-0:1.0: USB hub found [ 42.422234] hub 1-0:1.0: 2 ports detected [ 42.422400] ehci-orion: EHCI orion driver [ 42.422444] ehci-exynos: EHCI EXYNOS driver [ 42.422480] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 42.422492] ohci-pci: OHCI PCI platform driver [ 42.422510] ohci-platform: OHCI generic platform driver [ 42.422573] ohci-platform a7030000.ohci: Generic Platform OHCI controller [ 42.422581] ohci-platform a7030000.ohci: new USB bus registered, assigned bus number 2 [ 42.422672] ohci-platform a7030000.ohci: irq 340, io mem 0xa7030000 [ 42.486191] hub 2-0:1.0: USB hub found [ 42.486203] hub 2-0:1.0: 2 ports detected [ 42.486346] ohci-exynos: OHCI EXYNOS driver [ 42.486534] usbcore: registered new interface driver usb-storage [ 42.613408] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0 [ 42.613657] i2c /dev entries driver [ 42.615224] sdhci: Secure Digital Host Controller Interface driver [ 42.615229] sdhci: Copyright(c) Pierre Ossman [ 42.615379] Synopsys Designware Multimedia Card Interface Driver [ 42.615713] sdhci-pltfm: SDHCI platform and OF driver helper [ 42.617216] ledtrig-cpu: registered to indicate activity on CPUs [ 42.617702] usbcore: registered new interface driver usbhid [ 42.617706] usbhid: USB HID core driver [ 42.618918] NET: Registered protocol family 17 [ 42.618999] 9pnet: Installing 9P2000 support [ 42.619029] Key type dns_resolver registered [ 42.619256] registered taskstats version 1 [ 42.619260] Loading compiled-in X.509 certificates [ 42.619478] 602b0000.uart: ttyAMA0 at MMIO 0x602b0000 (irq = 341, base_baud = 0) is a SBSA [ 42.626259] sd 0:0:6:0: [sdg] Attached SCSI disk [ 42.647383] printk: console [ttyAMA0] enabled [ 42.758014] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 42.803593] sd 0:0:7:0: [sdh] Attached SCSI disk [ 42.826958] rtc-efi rtc-efi: setting system clock to 2018-12-11 17:09:49 UTC (1544548189) [ 42.962621] hub 1-1:1.0: USB hub found [ 42.963069] ALSA device list: [ 42.968839] hub 1-1:1.0: 4 ports detected [ 42.971826] No soundcards found. [ 46.718560] Freeing unused kernel memory: 1408K [ 46.746123] Run /init as init process Starting rcS... ++ Mounting filesystem ifdown: interface lo not configured ifdown: interface eth0 not configured ++ Starting ssh daemon [ 46.794176] random: sshd: uninitialized urandom read (32 bytes read) [ 46.846017] usb 1-2: new high-speed USB device number 3 using ehci-platform ip: RTNETLINK answers: File exists udhcpc: started, v1.29.0.git Setting IP address 0.0.0.0 on eth0 /var/empty must be owned by root and not group or world-writable. rcS Complete Welcome to Mini Linux GNU/Linux 4.20.0-rc6-next-20181211 aarch64 Version: 1.1.6 .--. |o_o | |:_/ | // \ \ (| | ) /'_ _/`\ ___)=(___/ Documentation: http://open-estuary.org E-mail: Chinafengliang@163.com estuary:/$ udhcpc: sending discover [ 47.006618] hub 1-2:1.0: USB hub found [ 47.010463] hub 1-2:1.0: 4 ports detected [ 47.086018] usb 1-1.1: new full-speed USB device number 4 using ehci-platform [ 47.302012] usb 1-2.1: new full-speed USB device number 5 using ehci-platform [ 47.418664] input: Keyboard/Mouse KVM 1.1.0 as /devices/platform/soc/a7020000.ehci/usb1/1-2/1-2.1/1-2.1:1.0/0003:12D1:0003.0001/input/input0 [ 47.490246] hid-generic 0003:12D1:0003.0001: input: USB HID v1.10 Keyboard [Keyboard/Mouse KVM 1.1.0] on usb-a7020000.ehci-2.1/input0 [ 47.503263] input: Keyboard/Mouse KVM 1.1.0 as /devices/platform/soc/a7020000.ehci/usb1/1-2/1-2.1/1-2.1:1.1/0003:12D1:0003.0002/input/input1 [ 47.515917] hid-generic 0003:12D1:0003.0002: input: USB HID v1.10 Mouse [Keyboard/Mouse KVM 1.1.0] on usb-a7020000.ehci-2.1/input1 udhcpc: sending discover udhcpc: sending discover udhcpc: no lease, failing
estuary:/$
Best Regards, Wei
linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
.
On Tue, Dec 11, 2018 at 03:23:11PM +0000, Mark Brown wrote:
On Tue, Dec 11, 2018 at 05:10:16AM -0800, kernelci.org bot wrote:
Today's -next fails to boot on D05:
defconfig: hip07-d05: lab-collabora: new failure (last pass: next-20181210)It takes an oops during IPMI initialization:
09:51:45.224591 [ 87.646247] ipmi_si: Adding SMBIOS-specified bt state machine 09:51:45.242352 [ 87.652129] ipmi_si: Trying SMBIOS-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 09:51:45.242646 [ 87.661875] Unable to handle kernel paging request at virtual address ffff7dfffee000e4
...
09:51:45.429194 [ 87.845965] Call trace: 09:51:45.429426 [ 87.848400] logic_inb+0x80/0xb8 09:51:45.429640 [ 87.851620] port_inb+0x18/0x20 [ipmi_si] 09:51:45.443075 [ 87.855620] bt_detect+0x40/0x250 [ipmi_si] 09:51:45.443320 [ 87.859793] try_smi_init+0x1a8/0x868 [ipmi_si] 09:51:45.443539 [ 87.864313] init_ipmi_si+0x190/0x220 [ipmi_si]
...
09:51:45.479097 [ 87.910207] udevd[2569]: worker [2589] terminated by signal 11 (Segmentation fault) 09:51:45.501664 [ 87.917863] udevd[2569]: worker [2589] failed while handling '/devices/platform/dmi-ipmi-si.0'
Full details here, including bisection information and full logs:
https://kernelci.org/boot/id/5c0f88d259b514823d4925c0/
Unfortunately it looks like the bug has actually been around for a while but wasn't stopping us getting to a prompt:
https://storage.kernelci.org/next/master/next-20181210/arm64/defconfig/lab-c...
and it might still be some unrelated hang there.
The "bad commit" is just updating the -next metadata, so the bisection doesn't appear to be useful :(
Will
On Tue, Dec 11, 2018 at 04:35:59PM +0000, Will Deacon wrote:
On Tue, Dec 11, 2018 at 03:23:11PM +0000, Mark Brown wrote:
Unfortunately it looks like the bug has actually been around for a while but wasn't stopping us getting to a prompt:
https://storage.kernelci.org/next/master/next-20181210/arm64/defconfig/lab-c...
and it might still be some unrelated hang there.
The "bad commit" is just updating the -next metadata, so the bisection doesn't appear to be useful :(
Sorry, that's the commit to start a bisection on rather than the result of a bisection (ie, what you'd pass to "git bisect bad").
kernel-build-reports@lists.linaro.org
-
Guillaume Tucker -
John Garry -
kernelci.org bot -
Mark Brown -
Wei Xu -
Will Deacon