Full logs are available at http://arm-soc.lixom.net/bootlogs/stable-rc/v4.4.37-29-gbe16178/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:34.07 bbb arm-omap2plus_defconfig : FAILED 1:54.09 bbb arm-multi_v7_defconfig : FAILED 1:52.55 bbb arm-multi_v7_nosmp_defconfig : FAILED 1:52.41 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.05 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:48.27 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:52.77 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:47.16 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.93 jetsontx1 arm64-defconfig : NO DTB jetsontx1 arm64-nosmp_defconfig : NO DTB odroidu3 arm-exynos_defconfig : FAILED 2:06.83 odroidu3 arm-multi_v7_defconfig : FAILED 2:07.66 seaboard arm-tegra_defconfig : FAILED 1:53.65 seaboard arm-multi_v7_defconfig : FAILED 1:59.39 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:52.23 trimslice arm-multi_v7_defconfig : FAILED 2:10.95 trimslice arm-multi_v7_nosmp_defconfig : FAILED 2:06.30

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:16.05 arndale arm-exynos_defconfig : warnings 1:29.43 arndale arm-multi_v7_defconfig : passed 1:16.88 arndale arm-multi_lpae_defconfig : passed 1:33.51 capri arm-multi_v7_defconfig : passed 0:49.62 capri arm-multi_v7_nosmp_defconfig : warnings 1:33.52 chitra powerpc-pasemi_defconfig : passed 2:45.69 chitra powerpc-ppc64_defconfig : passed 2:06.11 colombus arm-sunxi_defconfig : passed 2:03.76 colombus arm-multi_v7_defconfig : passed 2:13.58 colombus arm-multi_lpae_defconfig : passed 2:12.88 cosmic arm-imx_v6_v7_defconfig : passed 3:19.39 cosmic arm-multi_v7_defconfig : passed 3:06.69 cosmic arm-multi_v7_nosmp_defconfig : passed 2:50.02 cubie arm-sunxi_defconfig : passed 0:52.43 cubie arm-multi_v7_defconfig : passed 0:58.58 cubie arm-multi_v7_nosmp_defconfig : passed 1:00.27 cubie2 arm-sunxi_defconfig : passed 0:49.01 cubie2 arm-multi_v7_defconfig : passed 0:56.10 cubie2 arm-multi_lpae_defconfig : passed 1:07.12 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:02.28 cubox arm-multi_v7_defconfig : passed 1:05.10 cubox arm-mvebu_v7_defconfig : passed 1:27.66 cubox arm-multi_v7_nosmp_defconfig : passed 1:08.08 jetsontk1 arm-tegra_defconfig : passed 1:44.09 jetsontk1 arm-multi_v7_defconfig : passed 2:18.97 jetsontk1 arm-multi_lpae_defconfig : passed 1:44.65 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:38.17 minnowmax x86-minnowmax_defconfig : passed 1:41.76 pandaes arm-omap2plus_defconfig : warnings 1:38.03 pandaes arm-multi_v7_defconfig : passed 1:48.88 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:57.48 parallella arm-multi_v7_defconfig : passed 2:54.14 parallella arm-multi_v7_nosmp_defconfig : warnings 2:33.94 pi arm-exynos_defconfig : passed 1:25.83 pi arm-multi_v7_defconfig : passed 1:40.98 pi arm-multi_lpae_defconfig : passed 1:48.22 pi arm-multi_v7_nosmp_defconfig : warnings 1:39.56 pit arm-exynos_defconfig : passed 1:30.88 pit arm-multi_v7_defconfig : passed 1:32.59 pit arm-multi_lpae_defconfig : passed 1:56.50 pit arm-multi_v7_nosmp_defconfig : warnings 1:37.99 seattle arm64-defconfig : passed 2:07.31 seattle arm64-nosmp_defconfig : passed 2:07.22 wandboard arm-imx_v6_v7_defconfig : passed 1:15.48 wandboard arm-multi_v7_defconfig : passed 1:06.14 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:19.86

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 0:02.63 beaver arm-multi_v7_defconfig : OFFLINE 0:04.15 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 0:03.43 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.38 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:19.09 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:43.76 dalmore arm-tegra_defconfig : OFFLINE 0:02.65 dalmore arm-multi_v7_defconfig : OFFLINE 0:02.80 dalmore arm-multi_lpae_defconfig : OFFLINE 0:04.08 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 0:02.83 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:23.55 hummingboard arm-multi_v7_defconfig : OFFLINE 2:28.38 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.89 omap5uevm arm-omap2plus_defconfig : OFFLINE 0:02.63 omap5uevm arm-multi_v7_defconfig : OFFLINE 0:03.38 omap5uevm arm-multi_lpae_defconfig : OFFLINE 0:04.38 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 0:03.31 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:59.80 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:41.09 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:51.09 sama5 arm-sama5_defconfig : OFFLINE 2:12.32 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:28.40 snow arm-exynos_defconfig : OFFLINE 2:21.09 snow arm-multi_v7_defconfig : OFFLINE 2:44.07 snow arm-multi_lpae_defconfig : OFFLINE 2:14.08 snow arm-multi_v7_nosmp_defconfig : OFFLINE 2:11.88 snowball arm-u8500_defconfig : OFFLINE 0:05.73 snowball arm-multi_v7_defconfig : OFFLINE 0:06.70 snowball arm-multi_v7_nosmp_defconfig : OFFLINE 0:06.96 socfpga arm-socfpga_defconfig : OFFLINE 2:37.75 socfpga arm-multi_v7_defconfig : OFFLINE 2:15.75 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.22 trimslice arm-tegra_defconfig : OFFLINE 2:17.98

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.101577] dwmmc_exynos 12220000.mmc: Version ID is 241a [ 2.106956] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 102,32 bit host data width,128 deep fifo [ 2.116442] dwmmc_exynos 12220000.mmc: No vqmmc regulator found [ 2.149288] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 2.153792] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.160040] ledtrig-cpu: registered to indicate activity on CPUs [ 2.165037] usbcore: registered new interface driver usbhid [ 2.170479] usbhid: USB HID core driver [ 2.176602] NET: Registered protocol family 10 [ 2.179988] sit: IPv6 over IPv4 tunneling driver [ 2.184473] NET: Registered protocol family 17 [ 2.188597] can: controller area network core (rev 20120528 abi 9) [ 2.194789] NET: Registered protocol family 29 [ 2.199184] can: raw protocol (rev 20120528) [ 2.203443] can: broadcast manager protocol (rev 20120528 t) [ 2.209087] can: netlink gateway (rev 20130117) max_hops=1 [ 2.214745] Key type dns_resolver registered [ 2.219062] ThumbEE CPU extension supported. [ 2.224067] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.230528] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.236164] hctosys: unable to open rtc device (rtc0) [ 2.244751] MAIN_DC: disabling [ 2.246319] hdmi-en: disabling [ 2.249728] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.38-rc1-00029-gbe16178 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Fri Dec 9 14:34:25 PST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192

[PYBOOT] [arndale 02:30]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:31]: got exception: timeout ~$off

[PYBOOT] [arndale 02:33]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.529493] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.595713] Synopsys Designware Multimedia Card Interface Driver [ 1.603497] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.613100] ledtrig-cpu: registered to indicate activity on CPUs [ 1.619928] usbcore: registered new interface driver usbhid [ 1.625828] usbhid: USB HID core driver [ 1.636523] NET: Registered protocol family 10 [ 1.642999] sit: IPv6 over IPv4 tunneling driver [ 1.649137] NET: Registered protocol family 17 [ 1.653908] can: controller area network core (rev 20120528 abi 9) [ 1.660553] NET: Registered protocol family 29 [ 1.665276] can: raw protocol (rev 20120528) [ 1.669798] can: broadcast manager protocol (rev 20120528 t) [ 1.675794] can: netlink gateway (rev 20130117) max_hops=1 [ 1.682489] Key type dns_resolver registered [ 1.687362] omap_voltage_late_init: Voltage driver support not added [ 1.695502] ThumbEE CPU extension supported. [ 1.700112] Registering SWP/SWPB emulation handler [ 1.714119] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.721862] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.730252] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.737924] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.745518] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.753079] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.760400] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.768570] hctosys: unable to open rtc device (rtc0) [ 1.783299] Waiting for root device /dev/mmcblk1p2... [ 1.817730] mmc1: MAN_BKOPS_EN bit is not set [ 1.824255] mmc1: new high speed MMC card at address 0001 [ 1.830923] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.836135] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.842730] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.851260] mmcblk0: p1 p2

[PYBOOT] [bbb 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:50]: got exception: timeout ~$off

[PYBOOT] [bbb 01:51]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.349868] sdhci: Copyright(c) Pierre Ossman [ 1.355638] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.418930] Synopsys Designware Multimedia Card Interface Driver [ 1.426429] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.435457] ledtrig-cpu: registered to indicate activity on CPUs [ 1.442174] usbcore: registered new interface driver usbhid [ 1.448051] usbhid: USB HID core driver [ 1.457324] NET: Registered protocol family 10 [ 1.463823] sit: IPv6 over IPv4 tunneling driver [ 1.469758] NET: Registered protocol family 17 [ 1.474493] can: controller area network core (rev 20120528 abi 9) [ 1.481089] NET: Registered protocol family 29 [ 1.485784] can: raw protocol (rev 20120528) [ 1.490297] can: broadcast manager protocol (rev 20120528 t) [ 1.496273] can: netlink gateway (rev 20130117) max_hops=1 [ 1.502895] Key type dns_resolver registered [ 1.507673] omap_voltage_late_init: Voltage driver support not added [ 1.515525] ThumbEE CPU extension supported. [ 1.527849] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.535419] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.543217] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.550742] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.558233] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.565709] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.572980] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.580592] hctosys: unable to open rtc device (rtc0) [ 1.591571] Waiting for root device /dev/mmcblk1p2... [ 1.626020] mmc1: MAN_BKOPS_EN bit is not set [ 1.632404] mmc1: new high speed MMC card at address 0001 [ 1.638849] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.643913] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.650384] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.658635] mmcblk0: p1 p2

[PYBOOT] [bbb 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:50]: got exception: timeout ~$off

[PYBOOT] [bbb 01:51]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.067765] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.074099] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.080980] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.090587] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.100098] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.107123] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.150605] ledtrig-cpu: registered to indicate activity on CPUs [ 2.158788] oprofile: using arm/armv7 [ 2.163988] Initializing XFRM netlink socket [ 2.169074] NET: Registered protocol family 10 [ 2.179510] sit: IPv6 over IPv4 tunneling driver [ 2.188291] NET: Registered protocol family 17 [ 2.193224] NET: Registered protocol family 15 [ 2.198512] Key type dns_resolver registered [ 2.203460] omap_voltage_late_init: Voltage driver support not added [ 2.210202] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.218677] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.228958] ThumbEE CPU extension supported. [ 2.233627] Registering SWP/SWPB emulation handler [ 2.238668] SmartReflex Class3 initialized [ 2.295608] mmc1: MAN_BKOPS_EN bit is not set [ 2.305549] mmc1: new high speed MMC card at address 0001 [ 2.317132] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 2.327470] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.338214] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.354140] mmcblk0: p1 p2 [ 2.377237] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.384592] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.397240] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.405581] hctosys: unable to open rtc device (rtc0) [ 2.411038] sr_init: No PMIC hook to init smartreflex [ 2.416699] sr_init: platform driver register failed for SR [ 2.461844] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.571483] NET: Registered protocol family 10 [ 1.576762] sit: IPv6 over IPv4 tunneling driver [ 1.582040] NET: Registered protocol family 17 [ 1.586701] can: controller area network core (rev 20120528 abi 9) [ 1.593204] NET: Registered protocol family 29 [ 1.597863] can: raw protocol (rev 20120528) [ 1.602337] can: broadcast manager protocol (rev 20120528 t) [ 1.608264] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614308] Key type dns_resolver registered [ 1.618869] omap_voltage_late_init: Voltage driver support not added [ 1.626011] Power Management for TI OMAP4+ devices. [ 1.631326] ThumbEE CPU extension supported. [ 1.635818] Registering SWP/SWPB emulation handler [ 1.642605] palmas 0-0058: Irq flag is 0x00000008 [ 1.667177] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698835] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.713011] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735462] rtc-ds1307 2-006f: SET TIME! [ 1.741216] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.747967] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752570] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761375] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.795935] vdd_3v3: supplied by regen1 [ 1.836858] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.853964] aic_dvdd_fixed: disabling [ 1.857978] ldousb: disabling [ 1.862016] Waiting for root device /dev/mmcblk1p1... [ 1.869557] mmc1: MAN_BKOPS_EN bit is not set [ 1.881579] mmc1: new high speed MMC card at address 0001 [ 1.887563] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892455] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898807] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905670] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:50]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:52]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.571507] NET: Registered protocol family 10 [ 1.576781] sit: IPv6 over IPv4 tunneling driver [ 1.582057] NET: Registered protocol family 17 [ 1.586724] can: controller area network core (rev 20120528 abi 9) [ 1.593234] NET: Registered protocol family 29 [ 1.597897] can: raw protocol (rev 20120528) [ 1.602376] can: broadcast manager protocol (rev 20120528 t) [ 1.608311] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614357] Key type dns_resolver registered [ 1.618918] omap_voltage_late_init: Voltage driver support not added [ 1.626063] Power Management for TI OMAP4+ devices. [ 1.631371] ThumbEE CPU extension supported. [ 1.635871] Registering SWP/SWPB emulation handler [ 1.642684] palmas 0-0058: Irq flag is 0x00000008 [ 1.667192] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698792] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.712911] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735484] rtc-ds1307 2-006f: SET TIME! [ 1.741204] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.747963] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752571] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761389] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.795960] vdd_3v3: supplied by regen1 [ 1.836883] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.853983] aic_dvdd_fixed: disabling [ 1.858000] ldousb: disabling [ 1.862045] Waiting for root device /dev/mmcblk1p1... [ 1.869590] mmc1: MAN_BKOPS_EN bit is not set [ 1.881618] mmc1: new high speed MMC card at address 0001 [ 1.887604] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892497] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898856] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905721] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:47]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.457090] NET: Registered protocol family 10 [ 1.462355] sit: IPv6 over IPv4 tunneling driver [ 1.467534] NET: Registered protocol family 17 [ 1.472214] can: controller area network core (rev 20120528 abi 9) [ 1.478729] NET: Registered protocol family 29 [ 1.483392] can: raw protocol (rev 20120528) [ 1.487866] can: broadcast manager protocol (rev 20120528 t) [ 1.493800] can: netlink gateway (rev 20130117) max_hops=1 [ 1.499755] Key type dns_resolver registered [ 1.504306] omap_voltage_late_init: Voltage driver support not added [ 1.511256] Power Management for TI OMAP4+ devices. [ 1.516521] ThumbEE CPU extension supported. [ 1.521101] ata1: SATA link down (SStatus 0 SControl 300) [ 1.528013] palmas 0-0058: Irq flag is 0x00000008 [ 1.551990] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.580147] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.593442] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.615554] rtc-ds1307 2-006f: SET TIME! [ 1.621179] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.627886] rtc-ds1307 2-006f: 64 bytes nvram [ 1.632466] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.640268] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.675749] vdd_3v3: supplied by regen1 [ 1.710905] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.723494] aic_dvdd_fixed: disabling [ 1.727493] ldousb: disabling [ 1.731411] Waiting for root device /dev/mmcblk1p1... [ 1.769664] mmc1: MAN_BKOPS_EN bit is not set [ 1.781623] mmc1: new high speed MMC card at address 0001 [ 1.787495] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.792323] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.798609] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.805349] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.179953] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.190316] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.195177] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.201465] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.208323] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.217912] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.227407] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.234448] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.282851] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.289146] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296013] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.305598] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315095] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.322133] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.328240] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.334548] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.341393] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.350976] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.360509] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.367580] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.374202] vdd_3v3: supplied by regen1 [ 2.413178] hctosys: unable to open rtc device (rtc0) [ 2.418488] sr_init: No PMIC hook to init smartreflex [ 2.424037] sr_init: platform driver register failed for SR [ 2.467189] mmc1: MAN_BKOPS_EN bit is not set [ 2.475689] aic_dvdd_fixed: disabling [ 2.479909] ldousb: disabling [ 2.484328] mmc1: new high speed MMC card at address 0001 [ 2.490648] Waiting for root device /dev/mmcblk1p1... [ 2.496746] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.502093] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.508951] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.517286] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 41.156242] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.170585] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 82.066466] random: dd: uninitialized urandom read (512 bytes read, 52 bits of entropy available) [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 86.537922] eth0: device MAC address ea:68:1e:21:ab:3c [ 86.681720] RX IPC Checksum Offload disabled [ 86.686344] No MAC Management Counters available Listening on LPF/eth0/ea:68:1e:21:ab:3c Sending on LPF/eth0/ea:68:1e:21:ab:3c Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 No DHCPOFFERS received. No working leases in persistent database - sleeping. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2.

[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:19]: got exception: timeout ~$off

[PYBOOT] [colombus 03:20]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.893443] dwmmc_exynos 12550000.mmc: No vqmmc regulator found [ 1.897477] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.906174] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.937484] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.938533] usbcore: registered new interface driver usbhid [ 1.942922] usbhid: USB HID core driver [ 1.953973] NET: Registered protocol family 10 [ 1.960032] sit: IPv6 over IPv4 tunneling driver [ 1.960960] NET: Registered protocol family 17 [ 1.963500] NET: Registered protocol family 15 [ 1.968109] Registering SWP/SWPB emulation handler [ 1.979554] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.980018] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 2.000096] mmc1: MAN_BKOPS_EN bit is not set [ 2.001415] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 2.008753] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 2.018444] max98090 1-0010: MAX98090 REVID=0x43 [ 2.018551] mmc1: new DDR MMC card at address 0001 [ 2.019157] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 2.019406] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.019643] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.019880] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.033440] mmcblk0: p1 p2 [ 2.054892] max98090 1-0010: use default 2.8v micbias [ 2.065238] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.069690] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.098024] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.128854] VDD10_HDMI_1.0V: disabling [ 2.129714] vdd_g3d: disabling [ 2.130771] BUCK8_2.8V: disabling [ 2.134968] ALSA device list: [ 2.136246] #0: Odroid-U3 [ 2.140345] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [odroidu3 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 02:03]: got exception: timeout ~$off

[PYBOOT] [odroidu3 02:05]: Done. Board odroidu3-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.390668] dwmmc_exynos 12550000.mmc: No vqmmc regulator found [ 1.396575] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.429778] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.430296] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.436539] ledtrig-cpu: registered to indicate activity on CPUs [ 1.441376] usbcore: registered new interface driver usbhid [ 1.446808] usbhid: USB HID core driver [ 1.453314] NET: Registered protocol family 10 [ 1.455482] sit: IPv6 over IPv4 tunneling driver [ 1.459980] NET: Registered protocol family 17 [ 1.464060] can: controller area network core (rev 20120528 abi 9) [ 1.470258] NET: Registered protocol family 29 [ 1.474631] can: raw protocol (rev 20120528) [ 1.478895] can: broadcast manager protocol (rev 20120528 t) [ 1.484535] can: netlink gateway (rev 20130117) max_hops=1 [ 1.490227] Key type dns_resolver registered [ 1.494359] ThumbEE CPU extension supported. [ 1.498505] Registering SWP/SWPB emulation handler [ 1.506004] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.535286] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.547373] mmc1: MAN_BKOPS_EN bit is not set [ 1.547761] VDD10_HDMI_1.0V: disabling [ 1.548676] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.548869] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.549153] mmc1: new DDR MMC card at address 0001 [ 1.574214] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 1.574667] vdd_g3d: disabling [ 1.575291] BUCK8_2.8V: disabling [ 1.585051] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.590938] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.596817] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.603242] mmcblk0: p1 p2 [ 1.606656] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [odroidu3 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 02:05]: got exception: timeout ~$off

[PYBOOT] [odroidu3 02:07]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.680066] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.686497] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.697686] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.704158] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.709585] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.717350] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.723170] mmc2: switch to bus width 2 failed [ 1.723438] mmc2: switch to bus width 1 failed [ 1.723450] mmc2: new high speed MMC card at address 0001 [ 1.732398] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.732622] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.742237] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.743540] mmcblk0: p3 [ 1.763801] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.770623] hub 3-0:1.0: USB hub found [ 1.774432] hub 3-0:1.0: 1 port detected [ 1.782875] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.789503] [drm] No driver support for vblank timestamp query. [ 1.798380] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.812184] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.820891] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.834304] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.854289] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.858719] mmc0: new SDIO card at address 0001 [ 1.888701] Console: switching to colour frame buffer device 170x48 [ 1.928032] drm drm: fb0: frame buffer device [ 1.943784] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.950555] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.957634] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.972236] vdd_1v5: disabling [ 1.975312] vdd_1v2: disabling [ 2.497124] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.508277] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:57]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:58]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.650934] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.657314] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667660] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674124] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679537] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687278] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699376] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.705926] hub 3-0:1.0: USB hub found [ 1.709705] hub 3-0:1.0: 1 port detected [ 1.716966] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.723578] [drm] No driver support for vblank timestamp query. [ 1.810542] mmc2: switch to bus width 2 failed [ 1.823315] Console: switching to colour frame buffer device 170x48 [ 1.846583] mmc2: switch to bus width 1 failed [ 1.846594] mmc2: new high speed MMC card at address 0001 [ 1.851363] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.856880] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.856982] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.861906] mmcblk0: p3 [ 1.878179] drm drm: fb0: frame buffer device [ 1.882634] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.889021] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.895921] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.910838] vdd_1v5: disabling [ 1.913907] vdd_1v2: disabling [ 1.936946] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.950440] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.958877] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.971670] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.996283] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.004928] mmc0: new SDIO card at address 0001 [ 2.520397] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.531691] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:50]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:51]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.807555] Key type dns_resolver registered [ 1.813460] Registering SWP/SWPB emulation handler [ 1.819035] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.829970] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.842244] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.847998] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.854722] VDDIO_HDMI: supplied by vdd_5v0 [ 1.859239] vdd_sys: supplied by vdd_5v0 [ 1.863359] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.868381] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.868491] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.875076] mmc0: new SDIO card at address 0001 [ 1.885108] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.896625] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.903130] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.908600] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.916841] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.940828] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.950518] hub 3-0:1.0: USB hub found [ 1.954900] hub 3-0:1.0: 1 port detected [ 1.967168] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.973808] [drm] No driver support for vblank timestamp query. [ 2.063254] Console: switching to colour frame buffer device 170x48 [ 2.086327] drm drm: fb0: frame buffer device [ 2.120799] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.128317] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.136234] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 2.158410] vdd_1v5: disabling [ 2.161494] vdd_1v2: disabling [ 2.164708] ALSA device list: [ 2.167669] #0: NVIDIA Tegra Seaboard [ 2.370396] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.381597] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:53]: Done. Board trimslice-arm-multi_v7_defconfig failure log: -------------------------------------------------

Sending on Socket/fallback DHCPREQUEST on eth1 to 255.255.255.255 port 67 DHCPACK from 172.16.20.1 bound to 172.16.20.113 -- renewal in 40326 seconds. [ 9.543576] asix 2-1.1:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [infm] Using maiefile-qtyle conaurrent `omt in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[=25l[?1c7[ ok 8[?25hY?0c, [....] Starting web server: apache2apache2: apr_sociaddr_info_get() failed for trimslice apache2: Could not peliably determine the server's fully qualified domain name, using 125.0.0.1 for ServerName [?25lY?1c7[ ok 8[?25h[=0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...CPU1...[?25l[?1c7[ ok 8[?25h[?0cdone.

Debian GNU/Linux 7.0 trimslice ttyS0

trimslice login: root root Password: root

Laqt lmgin: Dri Jan 1 00:00:55 UTC 2010 on ttyS0 Lilux trimsliae 4.4,38-ra1-00009-ebe16158 !1 QMP Fri Dec 9 14:14:12 PST 2016 apmv7l

The programs included uith the Debian GLU/Lilux system are dree software; the exact distpi`ution terms dor each program ape described in the inditidual files in /usr-share/doc/*/aopyright.

Debian GNU/Lilux cmmes uith A@SMLUTELY NO UARRANTY, to the extent permitted by applicable lau.poot@trimsliae:~# [PYBOOT] [trimslice 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [trimslice 02:09]: got exception: timeout ~$off

[PYBOOT] [trimslice 02:10]: Done. Board trimslice-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: apr_sockaddr_info_get() failed for trimslice apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [.,.,] Loadine cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7Y1G[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

Debian GNU/Linux 7.0 trimslice ttyS0

trimslice login: root root Password: root

Last login: Fri Jan 1 20:00:51 UTC 2010 on ttyS0 Linux trimslice 4.4.38-rc1-00029-gbe16178 #1 Fri Dec 9 14:34:25 PST 2016 armv7l

The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /uqr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@trimslice:~# cat /proc/cmdline cat /proc-cmdline console=ttyS0,115200 root=/dev/sda1 rootwait rw root@trimslice:~# uname -r uname -r 4.4.38-rc1-00029-gbe16178 root@tpimslice8~# [PYBOOT] [trimslice 02:04]: got exception: ERROR: Timeout waiting for command: uname -r. ~$off

[PYBOOT] [trimslice 02:05]: Done.