Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20151209/
Failed boards:
apc arm-vt8500_v6_v7_defconfig : FAILED 1:56.26 arndale arm-exynos_defconfig : FAILED 1:32.32 arndale arm-multi_v7_defconfig : BUILD FAILED arndale arm-multi_lpae_defconfig : FAILED 1:45.73 bbb arm-omap2plus_defconfig : FAILED 1:53.42 bbb arm-multi_v7_defconfig : BUILD FAILED beaver arm-tegra_defconfig : FAILED 1:43.99 beaver arm-multi_v7_defconfig : BUILD FAILED capri arm-bcm_defconfig : FAILED 2:54.77 capri arm-multi_v7_defconfig : BUILD FAILED colombus arm-sunxi_defconfig : BUILD FAILED colombus arm-multi_v7_defconfig : BUILD FAILED colombus arm-multi_lpae_defconfig : FAILED 1:59.75 cosmic arm-imx_v6_v7_defconfig : FAILED 2:03.51 cosmic arm-multi_v7_defconfig : BUILD FAILED cubie arm-sunxi_defconfig : BUILD FAILED cubie arm-multi_v7_defconfig : BUILD FAILED cubie2 arm-sunxi_defconfig : BUILD FAILED cubie2 arm-multi_v7_defconfig : BUILD FAILED cubie2 arm-multi_lpae_defconfig : FAILED 1:43.81 cubox arm-multi_v7_defconfig : BUILD FAILED cubox arm-mvebu_v7_defconfig : FAILED 1:44.81 dalmore arm-tegra_defconfig : FAILED 1:47.45 dalmore arm-multi_v7_defconfig : BUILD FAILED dalmore arm-multi_lpae_defconfig : FAILED 1:59.28 hummingboard arm-imx_v6_v7_defconfig : FAILED 1:45.45 hummingboard arm-multi_v7_defconfig : BUILD FAILED jetsontk1 arm-tegra_defconfig : FAILED 1:45.45 jetsontk1 arm-multi_v7_defconfig : BUILD FAILED jetsontk1 arm-multi_lpae_defconfig : FAILED 1:55.47 odroidu3 arm-exynos_defconfig : FAILED 1:49.34 omap5uevm arm-omap2plus_defconfig : FAILED 2:03.39 omap5uevm arm-multi_v7_defconfig : BUILD FAILED omap5uevm arm-multi_lpae_defconfig : FAILED 2:03.49 pandaes arm-omap2plus_defconfig : FAILED 2:18.97 pandaes arm-multi_v7_defconfig : BUILD FAILED parallella arm-multi_v7_defconfig : BUILD FAILED pi arm-exynos_defconfig : FAILED 1:47.80 pi arm-multi_v7_defconfig : BUILD FAILED pi arm-multi_lpae_defconfig : FAILED 1:53.15 pit arm-exynos_defconfig : FAILED 1:52.36 pit arm-multi_v7_defconfig : BUILD FAILED pit arm-multi_lpae_defconfig : FAILED 1:54.04 rk3288evb arm-multi_v7_defconfig : BUILD FAILED seaboard arm-tegra_defconfig : FAILED 1:47.60 seaboard arm-multi_v7_defconfig : BUILD FAILED seattle arm64-defconfig : BUILD FAILED snow arm-multi_v7_defconfig : BUILD FAILED snowball arm-u8500_defconfig : FAILED 1:58.32 snowball arm-multi_v7_defconfig : BUILD FAILED socfpga arm-socfpga_defconfig : FAILED 1:52.30 socfpga arm-multi_v7_defconfig : BUILD FAILED trimslice arm-multi_v7_defconfig : BUILD FAILED wandboard arm-imx_v6_v7_defconfig : FAILED 1:44.34 wandboard arm-multi_v7_defconfig : BUILD FAILED
Successful boards:
chitra powerpc-pasemi_defconfig : passed 2:01.26 chitra powerpc-ppc64_defconfig : passed 2:06.00 minnowmax x86-minnowmax_defconfig : passed 1:23.95
Offline boards:
rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:44.49 sama5 arm-sama5_defconfig : OFFLINE 2:19.27 snow arm-exynos_defconfig : OFFLINE 1:46.97 snow arm-multi_lpae_defconfig : OFFLINE 1:45.92 trimslice arm-tegra_defconfig : OFFLINE 2:14.69
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board apc-arm-vt8500_v6_v7_defconfig failure log: -------------------------------------------------
[ 0.770000] hub 2-0:1.0: USB hub found [ 0.770000] hub 2-0:1.0: 2 ports detected [ 0.770000] platform-uhci d8008d00.uhci: Generic UHCI Host Controller [ 0.780000] platform-uhci d8008d00.uhci: new USB bus registered, assigned bus number 3 [ 0.790000] platform-uhci d8008d00.uhci: irq 25, io mem 0xd8008d00 [ 0.790000] hub 3-0:1.0: USB hub found [ 0.800000] hub 3-0:1.0: 2 ports detected [ 0.800000] usbcore: registered new interface driver usb-storage [ 0.810000] mousedev: PS/2 mouse device common for all mice [ 0.810000] vt8500-rtc d8100000.rtc: rtc core: registered vt8500-rtc as rtc0 [ 0.820000] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0 [ 0.830000] wmt-sdhc d800a000.sdhc: Initial signal voltage of 3.3v [ 0.850000] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0 [ 0.870000] wmt-sdhc d800a000.sdhc: WMT SDHC Controller initialized [ 0.870000] usbcore: registered new interface driver usbhid [ 0.880000] usbhid: USB HID core driver [ 0.880000] NET: Registered protocol family 10 [ 0.880000] mmc0: clock 0Hz busmode 2 powermode 0 cs 0 Vdd 0 width 0 timing 0 [ 0.890000] sit: IPv6 over IPv4 tunneling driver [ 0.900000] Key type dns_resolver registered [ 0.900000] vt8500-rtc d8100000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (94668[ 0.910000] Waiting for root device /dev/sda1... [ 1.060000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.210000] usb-storage 1-1:1.0: USB Mass Storage device detected [ 1.220000] scsi host0: usb-storage 1-1:1.0 [ 2.260000] scsi 0:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 0 CCS [ 4.640000] sd 0:0:0:0: [sda] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4.650000] sd 0:0:0:0: [sda] Write Protect is off [ 4.650000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 4.660000] sd 0:0:0:0: [sda] No Caching mode page found [ 4.660000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.720000] sda: sda1 [ 4.730000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.760000] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[PYBOOT] [apc 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [apc 01:54]: got exception: timeout ~$off
[PYBOOT] [apc 01:55]: Done.
========================================================================
Board arndale-arm-exynos_defconfig failure log: -------------------------------------------------
ARNDALE5250 # setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 ARNDALE5250 # tftp 0x46000000 tmp/arndale-jhteiH/exynos5250-arndale.dtb tftp 0x46000000 tmp/arndale-jhteiH/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.125 Filename 'tmp/arndale-jhteiH/exynos5250-arndale.dtb'. Load address: 0x46000000 Loading: *T ### done Bytes transferred = 42582 (a656 hex) ARNDALE5250 # bootm 0x43000000 - 0x46000000
[PYBOOT] [arndale 00:52]: u-boot: jumping to kernel image bootm 0x43000000 - 0x46000000 ## Booting kernel from Legacy Image at 43000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4357520 Bytes = 4.2 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 46000000 Booting using the fdt blob at 0x46000000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff2000, end 4ffff655 ... OK
Starting kernel ...
[PYBOOT] [arndale 00:54]: u-boot: started kernel.
[PYBOOT] [arndale 01:29]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 01:30]: got exception: timeout ~$off
[PYBOOT] [arndale 01:31]: Done.
========================================================================
Board arndale-arm-multi_lpae_defconfig failure log: -------------------------------------------------
setenv serverip 172.16.20.2 ARNDALE5250 # tftp 0x46000000 tmp/arndale-_xNvHp/exynos5250-arndale.dtb tftp 0x46000000 tmp/arndale-_xNvHp/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.125 Filename 'tmp/arndale-_xNvHp/exynos5250-arndale.dtb'. Load address: 0x46000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ### done Bytes transferred = 42582 (a656 hex) ARNDALE5250 # bootm 0x43000000 - 0x46000000
[PYBOOT] [arndale 01:05]: u-boot: jumping to kernel image bootm 0x43000000 - 0x46000000 ## Booting kernel from Legacy Image at 43000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6576768 Bytes = 6.3 MiB Load Address: 40208000 Entry Point: 40208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 46000000 Booting using the fdt blob at 0x46000000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff2000, end 4ffff655 ... OK
Starting kernel ...
[PYBOOT] [arndale 01:07]: u-boot: started kernel.
[PYBOOT] [arndale 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 01:43]: got exception: timeout ~$off
[PYBOOT] [arndale 01:45]: Done.
========================================================================
Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.043446] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.049792] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.056676] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.066282] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.075792] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.082818] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.126251] ledtrig-cpu: registered to indicate activity on CPUs [ 2.134434] oprofile: using arm/armv7 [ 2.139595] Initializing XFRM netlink socket [ 2.144674] NET: Registered protocol family 10 [ 2.154929] sit: IPv6 over IPv4 tunneling driver [ 2.163704] NET: Registered protocol family 17 [ 2.168636] NET: Registered protocol family 15 [ 2.173940] Key type dns_resolver registered [ 2.178810] omap_voltage_late_init: Voltage driver support not added [ 2.185553] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.194029] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.204252] ThumbEE CPU extension supported. [ 2.208915] Registering SWP/SWPB emulation handler [ 2.213954] SmartReflex Class3 initialized [ 2.285368] mmc1: MAN_BKOPS_EN bit is not set [ 2.291202] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.298360] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.309037] mmc1: new high speed MMC card at address 0001 [ 2.320518] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.328402] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 2.336230] hctosys: unable to open rtc device (rtc0) [ 2.341554] sr_init: No PMIC hook to init smartreflex [ 2.347288] sr_init: platform driver register failed for SR [ 2.389623] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.397561] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.411916] mmcblk0: p1 p2 [ 2.433027] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:51]: got exception: timeout ~$off
[PYBOOT] [bbb 01:52]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 3.415764] PCI: bus0: Fast back to back transfers disabled [ 3.421336] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.429601] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 3.435635] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.441214] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 3.448427] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.455695] pci 0000:01:00.0: supports D1 D2 [ 3.459953] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.480429] PCI: bus1: Fast back to back transfers disabled [ 3.485991] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.492662] pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref] [ 3.500400] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.506483] pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref] [ 3.514226] pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref] [ 3.521967] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.528047] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.533007] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.539085] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.546830] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.553932] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 3.560354] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.567314] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.573834] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.580806] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.586410] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.593918] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08b6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.603920] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.612817] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.618344] vdd_1v8_gen: supplied by vdd_5v_in [ 3.625475] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.632090] [drm] No driver support for vblank timestamp query. [ 3.638089] drm drm: No connectors reported connected with modes [ 3.644101] [drm] Cannot find any crtc or sizes - going 1024x768
[PYBOOT] [beaver 01:40]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:41]: got exception: timeout ~$off
[PYBOOT] [beaver 01:43]: Done.
========================================================================
Board capri-arm-bcm_defconfig failure log: -------------------------------------------------
[ 0.630000] sit: IPv6 over IPv4 tunneling driver [ 0.630000] NET: Registered protocol family 17 [ 0.640000] NET: Registered protocol family 15 [ 0.640000] ThumbEE CPU extension supported. [ 0.640000] Registering SWP/SWPB emulation handler [ 0.650000] mmc0: new high speed MMC card at address 0001 [ 0.650000] mmcblk0: mmc0:0001 016G4A 14.8 GiB [ 0.650000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.650000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.670000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.670000] Alternate GPT is invalid, using primary GPT. [ 0.670000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.670000] mmcldo1: disabling [ 0.680000] mmcldo2: disabling [ 0.680000] csr: disabling [ 0.680000] iosr2: disabling [ 0.680000] msr: disabling [ 0.680000] sdsr1: disabling [ 0.690000] sdsr2: disabling [ 0.690000] vsr: disabling [ 0.690000] gpldo1: disabling [ 0.690000] gpldo2: disabling [ 0.690000] gpldo3: disabling [ 0.700000] gpldo4: disabling [ 0.700000] gpldo5: disabling [ 0.700000] gpldo6: disabling [ 0.700000] ttyS0 - failed to request DMA [ 0.730000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 0.730000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 0.730000] devtmpfs: mounted [ 0.740000] Freeing unused kernel memory: 212K (c04db000 - c0510000)
[PYBOOT] [capri 00:22]: kernel: finished booting, starting userspace.
[PYBOOT] [capri 02:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [capri 02:53]: got exception: timeout ~$off
[PYBOOT] [capri 02:54]: Done.
========================================================================
Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.304646] usbhid: USB HID core driver [ 1.312552] NET: Registered protocol family 10 [ 1.317933] sit: IPv6 over IPv4 tunneling driver [ 1.323274] NET: Registered protocol family 17 [ 1.327758] can: controller area network core (rev 20120528 abi 9) [ 1.334011] NET: Registered protocol family 29 [ 1.338478] can: raw protocol (rev 20120528) [ 1.342768] can: broadcast manager protocol (rev 20120528 t) [ 1.348448] can: netlink gateway (rev 20130117) max_hops=1 [ 1.354400] Key type dns_resolver registered [ 1.360226] ThumbEE CPU extension supported. [ 1.364527] Registering SWP/SWPB emulation handler [ 1.373659] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.381991] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.387607] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.395631] ehci-platform 1c1b000.usb: irq 29, io mem 0x01c1b000 [ 1.410133] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.417114] hub 1-0:1.0: USB hub found [ 1.420919] hub 1-0:1.0: 1 port detected [ 1.425809] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:26 UTC (26) [ 1.437733] vcc3v3: disabling [ 1.440744] vcc5v0: disabling [ 1.444548] Waiting for root device /dev/mmcblk0p1... [ 1.623764] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.635843] mmc0: new high speed SDHC card at address aaaa [ 1.641973] mmcblk0: mmc0:aaaa SD04G 3.69 GiB [ 1.653569] mmcblk0: p1 [ 1.730172] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.761173] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 1.770084] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 1.780453] EXT4-fs (mmcblk0p1): INFO: recovery required on readonly filesystem [ 1.787795] EXT4-fs (mmcblk0p1): write access will be enabled during recovery [ 1.838296] unexpected IRQ trap at vector ee00811c
[PYBOOT] [colombus 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:57]: got exception: timeout ~$off
[PYBOOT] [colombus 01:59]: Done.
========================================================================
Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 1.461056] IR SANYO protocol handler initialized [ 1.465804] IR Sharp protocol handler initialized [ 1.470808] IR MCE Keyboard/mouse protocol handler initialized [ 1.476692] IR XMP protocol handler initialized [ 1.491117] imx2-wdt 4003e000.wdog: timeout 60 sec (nowayout=0) [ 1.497400] Bluetooth: HCI UART driver ver 2.3 [ 1.501944] Bluetooth: HCI UART protocol H4 registered [ 1.507102] Bluetooth: HCI UART protocol LL registered [ 1.513105] sdhci: Secure Digital Host Controller Interface driver [ 1.519304] sdhci: Copyright(c) Pierre Ossman [ 1.523771] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.531412] /soc/aips-bus@40080000/esdhc@400b2000: voltage-ranges unspecified [ 1.580717] mmc0: SDHCI controller on 400b2000.esdhc [400b2000.esdhc] using ADMA [ 1.592904] usbcore: registered new interface driver usbhid [ 1.598500] usbhid: USB HID core driver [ 1.632279] NET: Registered protocol family 10 [ 1.644659] sit: IPv6 over IPv4 tunneling driver [ 1.656140] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.664352] NET: Registered protocol family 17 [ 1.668905] can: controller area network core (rev 20120528 abi 9) [ 1.675744] NET: Registered protocol family 29 [ 1.681830] mmc0: new high speed SDHC card at address 1234 [ 1.690245] can: raw protocol (rev 20120528) [ 1.694814] can: broadcast manager protocol (rev 20120528 t) [ 1.702314] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 1.709941] can: netlink gateway (rev 20130117) max_hops=1 [ 1.719293] mmcblk0: p1 p2 p3 [ 1.723364] Key type dns_resolver registered [ 1.728010] Registering SWP/SWPB emulation handler [ 1.753892] snvs_rtc 400a7000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 1.879344] ALSA device list: [ 1.882460] No soundcards found. [ 1.897369] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
[PYBOOT] [cosmic 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:01]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:02]: Done.
========================================================================
Board cubie2-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.729381] hub 1-0:1.0: USB hub found [ 1.733237] hub 1-0:1.0: 1 port detected [ 1.739012] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.744736] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.752773] ehci-platform 1c1c000.usb: irq 32, io mem 0x01c1c000 [ 1.767283] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.774364] hub 2-0:1.0: USB hub found [ 1.778223] hub 2-0:1.0: 1 port detected [ 1.783996] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.790737] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.798762] ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400 [ 1.862296] hub 3-0:1.0: USB hub found [ 1.866108] hub 3-0:1.0: 1 port detected [ 1.871906] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.878653] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.887030] ohci-platform 1c1c400.usb: irq 33, io mem 0x01c1c400 [ 1.952144] hub 4-0:1.0: USB hub found [ 1.956030] hub 4-0:1.0: 1 port detected [ 1.961725] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 04:13:06 UTC (15186) [ 1.975358] vcc3v0: disabling [ 1.978440] vcc5v0: disabling [ 2.027290] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.038903] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 2.045532] ata1.00: 15649200 sectors, multi 0: LBA48 [ 2.058631] ata1.00: configured for UDMA/133 [ 2.063492] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 2.072972] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 2.081847] sd 0:0:0:0: [sda] Write Protect is off [ 2.086856] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.114180] sda: sda1 [ 2.117760] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.123330] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 2.131841] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[PYBOOT] [cubie2 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:42]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:43]: Done.
========================================================================
Board cubox-arm-mvebu_v7_defconfig failure log: -------------------------------------------------
[ 1.081133] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.086994] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.095071] orion-ehci f1051000.usb-host: irq 26, io mem 0xf1051000 [ 1.115472] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.122570] hub 2-0:1.0: USB hub found [ 1.126480] hub 2-0:1.0: 1 port detected [ 1.131274] usbcore: registered new interface driver usb-storage [ 1.137918] mousedev: PS/2 mouse device common for all mice [ 1.144576] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.153271] i2c /dev entries driver [ 1.159045] orion_wdt: Initial timeout 25 sec [ 1.163758] sdhci: Secure Digital Host Controller Interface driver [ 1.169971] sdhci: Copyright(c) Pierre Ossman [ 1.174538] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.215474] mmc0: SDHCI controller on f1092000.sdio-host [f1092000.sdio-host] using DMA [ 1.224172] usbcore: registered new interface driver usbhid [ 1.229754] usbhid: USB HID core driver [ 1.239673] NET: Registered protocol family 10 [ 1.245569] sit: IPv6 over IPv4 tunneling driver [ 1.250908] NET: Registered protocol family 17 [ 1.255529] ThumbEE CPU extension supported. [ 1.259786] Registering SWP/SWPB emulation handler [ 1.264557] PJ4 iWMMXt v2 coprocessor enabled. [ 1.272348] rtc-mv f10d8500.real-time-clock: setting system clock to 2015-12-09 07:43:25 UTC (1449647005) [ 1.283077] ALSA device list: [ 1.286068] No soundcards found. [ 1.305479] ata1: SATA link down (SStatus 0 SControl F300) [ 1.311108] Waiting for root device /dev/mmcblk0p2... [ 1.431448] mmc0: new high speed SDHC card at address e624 [ 1.437469] mmcblk0: mmc0:e624 SU04G 3.69 GiB [ 1.451628] mmcblk0: p1 p2 [ 1.536250] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.544921] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[PYBOOT] [cubox 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubox 01:43]: got exception: timeout ~$off
[PYBOOT] [cubox 01:44]: Done.
========================================================================
Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.148771] vdd-sensor-2v85: supplied by vdd-sys-3v3 [ 2.174773] sdhci: Secure Digital Host Controller Interface driver [ 2.181064] sdhci: Copyright(c) Pierre Ossman [ 2.191390] Synopsys Designware Multimedia Card Interface Driver [ 2.201652] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.210190] sdhci-tegra 78000400.sdhci: Got CD GPIO [ 2.215215] sdhci-tegra 78000400.sdhci: Got WP GPIO [ 2.221732] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.263487] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 2.271819] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.313061] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 2.333036] ledtrig-cpu: registered to indicate activity on CPUs [ 2.350997] usbcore: registered new interface driver usbhid [ 2.356669] usbhid: USB HID core driver [ 2.386152] NET: Registered protocol family 10 [ 2.393508] sit: IPv6 over IPv4 tunneling driver [ 2.400821] NET: Registered protocol family 17 [ 2.405426] can: controller area network core (rev 20120528 abi 9) [ 2.411957] NET: Registered protocol family 29 [ 2.416560] can: raw protocol (rev 20120528) [ 2.416576] mmc1: MAN_BKOPS_EN bit is not set [ 2.425425] can: broadcast manager protocol (rev 20120528 t) [ 2.431242] can: netlink gateway (rev 20130117) max_hops=1 [ 2.438476] Key type dns_resolver registered [ 2.443928] mmc1: new high speed MMC card at address 0001 [ 2.445263] ThumbEE CPU extension supported. [ 2.445324] Registering SWP/SWPB emulation handler [ 2.460423] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 2.465773] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.470922] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.471427] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.472738] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.479715] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:58]: Done.
========================================================================
Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.208868] mmc1: MAN_BKOPS_EN bit is not set [ 2.217039] mmc1: new high speed MMC card at address 0001 [ 2.226646] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 2.233196] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.241144] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.248877] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.259314] mmcblk0: p1 [ 2.608906] tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub [ 2.637385] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok [ 2.666636] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0 [ 2.685879] NET: Registered protocol family 10 [ 2.696903] mip6: Mobile IPv6 [ 2.699927] sit: IPv6 over IPv4 tunneling driver [ 2.717570] NET: Registered protocol family 17 [ 2.722215] NET: Registered protocol family 15 [ 2.726784] can: controller area network core (rev 20120528 abi 9) [ 2.733791] NET: Registered protocol family 29 [ 2.738369] can: raw protocol (rev 20120528) [ 2.742692] can: broadcast manager protocol (rev 20120528 t) [ 2.748520] can: netlink gateway (rev 20130117) max_hops=1 [ 2.754964] Bluetooth: RFCOMM socket layer initialized [ 2.760190] Bluetooth: RFCOMM ver 1.11 [ 2.764035] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.769519] Bluetooth: BNEP socket layer initialized [ 2.774593] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.780592] Bluetooth: HIDP socket layer initialized [ 2.787462] Key type dns_resolver registered [ 2.797088] Registering SWP/SWPB emulation handler [ 2.822033] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.827268] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.834017] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.853848] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.860562] [drm] No driver support for vblank timestamp query.
[PYBOOT] [dalmore 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:45]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:47]: Done.
========================================================================
Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 2.306844] usbhid: USB HID core driver [ 2.315119] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.326511] fsl-asoc-card sound-sgtl5000: ASoC: CPU DAI (null) not registered [ 2.333788] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517) [ 2.345750] mmc0: new high speed SDHC card at address b368 [ 2.354923] fsl-asrc 2034000.asrc: driver registered [ 2.363718] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.499166] mmcblk0: p1 p2 [ 3.015942] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.023412] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.033284] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 3.047071] NET: Registered protocol family 10 [ 3.054511] sit: IPv6 over IPv4 tunneling driver [ 3.061059] NET: Registered protocol family 17 [ 3.065656] can: controller area network core (rev 20120528 abi 9) [ 3.072019] NET: Registered protocol family 29 [ 3.076537] can: raw protocol (rev 20120528) [ 3.080919] can: broadcast manager protocol (rev 20120528 t) [ 3.086648] can: netlink gateway (rev 20130117) max_hops=1 [ 3.092871] Key type dns_resolver registered [ 3.103283] Registering SWP/SWPB emulation handler [ 3.114302] imx_thermal 2000000.aips-bus:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 3.127010] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 3.134216] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 3.144558] fsl-asoc-card sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.152062] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.159589] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.167043] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.175463] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.223887] brcm_reg: disabling [ 3.227535] ALSA device list: [ 3.230515] #0: On-board SPDIF [ 3.245765] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[PYBOOT] [hummingboard 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 01:43]: got exception: timeout ~$off
[PYBOOT] [hummingboard 01:45]: Done.
========================================================================
Board jetsontk1-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 4.637195] scsi host0: tegra-ahci [ 4.641073] scsi host1: tegra-ahci [ 4.644777] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 341 [ 4.652786] ata2: DUMMY [ 4.656269] +5V_USB_HS: supplied by +5V_SYS [ 4.661631] tegra-ehci 7d008000.usb: EHCI Host Controller [ 4.667055] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 4.674789] tegra-ehci 7d008000.usb: irq 349, io mem 0x7d008000 [ 4.689090] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 4.695848] hub 2-0:1.0: USB hub found [ 4.699652] hub 2-0:1.0: 1 port detected [ 4.704841] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19 [ 4.713027] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 4.720359] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 4.729324] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 4.734196] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 4.739083] mmc1: Unknown controller version (3). You may experience problems. [ 4.746356] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 4.751001] mmc1: Invalid maximum block size, assuming 512 bytes [ 4.789097] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 4.797364] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 4.804149] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822) [ 4.816381] +1.8V_RUN_CAM: disabling [ 4.820120] +2.8V_RUN_CAM: disabling [ 4.823809] +1.2V_RUN_CAM_FRONT: disabling [ 4.827994] +1.05V_RUN_CAM_REAR: disabling [ 4.832179] +3.3V_RUN_TOUCH: disabling [ 4.836017] +2.8V_RUN_CAM_AF: disabling [ 4.839951] +1.8V_RUN_VPP_FUSE: disabling [ 4.844043] +USB0_VBUS_SW: disabling [ 4.979078] ata1: SATA link down (SStatus 0 SControl 300) [ 4.984965] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 4.993331] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[PYBOOT] [jetsontk1 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [jetsontk1 01:53]: got exception: timeout ~$off
[PYBOOT] [jetsontk1 01:55]: Done.
========================================================================
Board jetsontk1-arm-tegra_defconfig failure log: -------------------------------------------------
[ 2.315665] Key type dns_resolver registered [ 2.321315] Registering SWP/SWPB emulation handler [ 2.333847] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 2.340817] +3.3V_SYS: supplied by +VDD_MUX [ 2.345060] +3.3V_LP0: supplied by +3.3V_SYS [ 2.349995] +1.35V_LP0(sd2): supplied by +5V_SYS [ 2.354674] +1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2) [ 2.361517] tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes [ 2.370688] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008 [ 2.780851] tegra-pcie 1003000.pcie-controller: link 0 down, retrying [ 3.191803] tegra-pcie 1003000.pcie-controller: link 0 down, retrying [ 3.602692] tegra-pcie 1003000.pcie-controller: link 0 down, retrying [ 3.611165] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring [ 3.617630] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 3.626787] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000 [ 4.037328] tegra-pcie 1003000.pcie-controller: link 1 down, retrying [ 4.448281] tegra-pcie 1003000.pcie-controller: link 1 down, retrying [ 4.859233] tegra-pcie 1003000.pcie-controller: link 1 down, retrying [ 4.867692] tegra-pcie 1003000.pcie-controller: link 1 down, ignoring [ 4.874632] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 4.881903] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 4.888789] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 4.896090] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.901586] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 4.907796] PCI: bus0: Fast back to back transfers enabled [ 4.913598] +5V_HDMI_CON: supplied by +5V_SYS [ 4.918186] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 4.924048] +3.3V_RUN: supplied by +3.3V_SYS [ 4.928397] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 4.937221] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.943826] [drm] No driver support for vblank timestamp query. [ 4.949897] drm drm: No connectors reported connected with modes [ 4.955901] [drm] Cannot find any crtc or sizes - going 1024x768
[PYBOOT] [jetsontk1 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [jetsontk1 01:43]: got exception: timeout ~$off
[PYBOOT] [jetsontk1 01:44]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.898046] usbhid: USB HID core driver [ 1.908245] NET: Registered protocol family 10 [ 1.912279] sit: IPv6 over IPv4 tunneling driver [ 1.913100] NET: Registered protocol family 17 [ 1.916092] NET: Registered protocol family 15 [ 1.920591] Key type dns_resolver registered [ 1.924973] Registering SWP/SWPB emulation handler [ 1.931348] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.935262] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.942698] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.955136] mmc1: MAN_BKOPS_EN bit is not set [ 1.956466] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.963769] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.973591] mmc1: new DDR MMC card at address 0001 [ 1.978119] max98090 1-0010: MAX98090 REVID=0x43 [ 1.982888] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 1.987421] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.993328] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.999227] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.005751] mmcblk0: p1 p2 [ 2.007509] max98090 1-0010: use default 2.8v micbias [ 2.019862] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.023720] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.053053] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.075378] VDD10_HDMI_1.0V: disabling [ 2.076159] vdd_g3d: disabling [ 2.077220] BUCK8_2.8V: disabling [ 2.081282] ALSA device list: [ 2.082784] #0: Odroid-U3 [ 2.087046] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.098713] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 2.101091] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.112468] unexpected IRQ trap at vector c0c4a4c6
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:48]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.821184] omap_vp_init: No PMIC info for vdd_core [ 1.826287] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.831928] omap_vp_init: No PMIC info for vdd_mm [ 1.836846] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.842575] omap_vp_init: No PMIC info for vdd_mpu [ 1.848059] Power Management for TI OMAP4+ devices. [ 1.852481] mmc0: MAN_BKOPS_EN bit is not set [ 1.854111] mmc0: new high speed MMC card at address 0001 [ 1.854444] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.854579] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.854711] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.880591] ThumbEE CPU extension supported. [ 1.885086] Registering SWP/SWPB emulation handler [ 1.892019] palmas 0-0048: Irq flag is 0x00000000 [ 1.902202] smsc95xx v1.0.4 [ 1.912031] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.946521] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.953842] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, ca:ad:e3:a7:83:95 [ 1.970056] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 1.977350] omap_hsmmc 4809c000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.016076] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.024812] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.035250] hctosys: unable to open rtc device (rtc0) [ 2.044879] vmmcsdio_fixed: disabling [ 2.049411] ldo3: disabling [ 2.051168] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.052918] mmc1: new high speed SDHC card at address 0001 [ 2.053198] mmcblk1: mmc1:0001 00000 14.6 GiB [ 2.054006] mmcblk1: p1 p2 [ 2.074671] ldo8: disabling [ 2.078726] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 2.087535] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 2.109375] unexpected IRQ trap at vector 00
[PYBOOT] [omap5uevm 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:01]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:02]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.396654] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.406143] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.413182] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.419302] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.425609] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.432463] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.442058] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.451539] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.458580] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.464887] omap_hsmmc 4809c000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.512247] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.518542] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.525401] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.534984] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.544482] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.548911] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.550786] mmc1: new high speed SDHC card at address 0001 [ 2.551893] mmcblk1: mmc1:0001 00000 14.6 GiB [ 2.553464] mmcblk1: p1 p2 [ 2.573245] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.580628] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.586945] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.593802] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.603392] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.612886] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.619913] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.627138] hctosys: unable to open rtc device (rtc0) [ 2.632463] sr_init: No PMIC hook to init smartreflex [ 2.637942] sr_init: platform driver register failed for SR [ 2.669472] vmmcsdio_fixed: disabling [ 2.674583] ldo3: disabling [ 2.678548] ldo8: disabling [ 2.685417] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
[PYBOOT] [omap5uevm 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:01]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:03]: Done.
========================================================================
Board pandaes-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.631805] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.648315] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.654449] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.660766] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.667602] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.677215] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.686706] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.693756] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.700134] omap_hsmmc 4809c000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.761840] omap_hsmmc 480d5000.mmc: GPIO lookup for consumer wp [ 2.762634] omap_hsmmc 480d5000.mmc: using device tree for GPIO lookup [ 2.775756] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480d5000[0]' [ 2.785339] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480d5000[0]' [ 2.794830] omap_hsmmc 480d5000.mmc: using lookup tables for GPIO lookup [ 2.801879] omap_hsmmc 480d5000.mmc: lookup for GPIO wp failed [ 2.808288] omap_hsmmc 480d5000.mmc: omap_device: omap_device_enable() called from invalid state 1 [ 2.942779] hctosys: unable to open rtc device (rtc0) [ 2.948852] sr_init: No PMIC hook to init smartreflex [ 2.948852] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 2.963104] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 2.971893] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 2.979888] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.981903] mmc0: new high speed SDHC card at address b368 [ 2.984344] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.987915] mmcblk0: p1 p2 [ 2.995910] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 3.009307] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.012664] mmc1: new SDIO card at address 0001 [ 3.061920] vwl1271: disabling [ 3.069702] VDAC: disabling [ 3.073547] VANA: disabling [ 3.077331] VUSB: disabling [ 3.086608] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[PYBOOT] [pandaes 02:15]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pandaes 02:16]: got exception: timeout ~$off
[PYBOOT] [pandaes 02:17]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.897276] TPS65090_RAILSDCDC2: supplied by vbat-supply [ 2.901189] lcd_vdd: supplied by TPS65090_RAILSDCDC2 [ 2.907911] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.912305] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 2.918636] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.925082] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.931480] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.936845] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 2.946394] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 2.980245] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.984816] of_graph_get_next_endpoint(): no port node found in /dp-controller@145B0000 [ 2.992878] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) [ 2.999842] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops) [ 3.008293] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 3.016855] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 3.022723] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.029312] [drm] No driver support for vblank timestamp query. [ 3.054261] Console: switching to colour frame buffer device 274x77 [ 3.054775] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.059158] mmc2: new high speed SDIO card at address 0001 [ 3.090250] exynos-drm exynos-drm: fb0: frame buffer device [ 3.110175] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.115227] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.122694] max77802-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.149210] vdd_1v2_2: disabling [ 3.151145] TPS65090_RAILSDCDC3: disabling [ 3.156760] lcd_vdd: disabling [ 3.161092] TPS65090_RAILSLDO1: disabling [ 3.163620] TPS65090_RAILSLDO2: disabling [ 3.168156] ALSA device list: [ 3.170611] #0: Peach-Pi-I2S-MAX98091 [ 3.176149] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:â3:73:46:fb:95 [ 3.186491] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[PYBOOT] [pi 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:46]: got exception: timeout ~$off
[PYBOOT] [pi 01:47]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.797512] can: raw protocol (rev 20120528) [ 1.801761] can: broadcast manager protocol (rev 20120528 t) [ 1.807403] can: netlink gateway (rev 20130117) max_hops=1 [ 1.813122] Key type dns_resolver registered [ 1.817479] ThumbEE CPU extension supported. [ 1.821372] Registering SWP/SWPB emulation handler [ 1.829868] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.835348] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.841718] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.847092] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.857176] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.863354] hctosys: unable to open rtc device (rtc0) [ 1.888030] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.893510] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.903536] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.909838] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.915222] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.924794] Waiting for root device /dev/mmcblk0p1... [ 1.929900] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.939477] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.949066] mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) [ 1.959201] mmc0: new HS400 MMC card at address 0001 [ 1.964260] mmcblk0: mmc0:0001 MAG2GC 14.6 GiB [ 1.968574] mmcblk0boot0: mmc0:0001 MAG2GC partition 1 4.00 MiB [ 1.974489] mmcblk0boot1: mmc0:0001 MAG2GC partition 2 4.00 MiB [ 1.980386] mmcblk0rpmb: mmc0:0001 MAG2GC partition 3 4.00 MiB [ 1.986691] mmcblk0: p1 [ 1.992442] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.998931] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.004287] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.009660] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 2.034576] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 2.041569] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[PYBOOT] [pi 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:51]: got exception: timeout ~$off
[PYBOOT] [pi 01:52]: Done.
========================================================================
Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.901859] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.907245] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 2.916798] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 2.950239] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.955464] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) [ 2.961876] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops) [ 2.969290] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 2.979850] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 2.985717] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.992307] [drm] No driver support for vblank timestamp query. [ 3.008694] Console: switching to colour frame buffer device 195x54 [ 3.019802] exynos-drm exynos-drm: fb0: frame buffer device [ 3.027852] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.040574] mmc2: new high speed SDIO card at address 0001 [ 3.045172] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.051086] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.058587] max77802-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.084264] vdd_1v2_2: disabling [ 3.086199] TPS65090_RAILSDCDC3: disabling [ 3.091842] lcd_vdd: disabling [ 3.096208] TPS65090_RAILSLDO1: disabling [ 3.098734] TPS65090_RAILSLDO2: disabling [ 3.103251] ALSA device list: [ 3.105693] #0: Peach-Pit-I2S-AX98090 [ 3.162486] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 3.172672] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.182788] workqueue: max_active 2113929041 requested for itmap - block_group = 3 is out of range, clamping between 1 and 512 [ 3.192687] ------------[ cut here ]------------ [ 3.197290] WARNING: CPU: 0 PID: 67 at /home/build/work/batch/kernel/locking/mutex.c:526 __mutex_lock_slowpath+0x3bc/0x404() [ 3.208475] DEBUG_LOCKS_WARN_ON(in_interrupt()) [ 3.212813] Modules linked in: [ 3.216025] CPU: 0 PID: 67 Comm: mmcqd/0 Not tainted 4.4.0-rc4-next-20151209 #1 [ 3.223309] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[PYBOOT] [pit 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:50]: got exception: timeout ~$off
[PYBOOT] [pit 01:51]: Done.
========================================================================
Board pit-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.778692] NET: Registered protocol family 17 [ 1.782716] can: controller area network core (rev 20120528 abi 9) [ 1.788908] NET: Registered protocol family 29 [ 1.793297] can: raw protocol (rev 20120528) [ 1.797545] can: broadcast manager protocol (rev 20120528 t) [ 1.803187] can: netlink gateway (rev 20130117) max_hops=1 [ 1.808903] Key type dns_resolver registered [ 1.813266] ThumbEE CPU extension supported. [ 1.817156] Registering SWP/SWPB emulation handler [ 1.825672] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.831149] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.837520] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.842893] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.852995] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.859162] hctosys: unable to open rtc device (rtc0) [ 1.883225] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.888709] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.898760] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.905041] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.910425] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.920025] Waiting for root device /dev/mmcblk0p1... [ 1.925082] mmc0: new HS200 MMC card at address 0001 [ 1.929980] mmcblk0: mmc0:0001 MAG2GC 14.6 GiB [ 1.934283] mmcblk0boot0: mmc0:0001 MAG2GC partition 1 4.00 MiB [ 1.940210] mmcblk0boot1: mmc0:0001 MAG2GC partition 2 4.00 MiB [ 1.946095] mmcblk0rpmb: mmc0:0001 MAG2GC partition 3 4.00 MiB [ 1.952410] mmcblk0: p1 [ 1.958163] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.964647] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.970000] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.975376] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 2.025281] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 2.032269] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[PYBOOT] [pit 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:52]: got exception: timeout ~$off
[PYBOOT] [pit 01:53]: Done.
========================================================================
Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.774587] Bluetooth: RFCOMM ver 1.11 [ 1.778368] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.783862] Bluetooth: BNEP socket layer initialized [ 1.788835] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.794810] Bluetooth: HIDP socket layer initialized [ 1.800526] Key type dns_resolver registered [ 1.806351] Registering SWP/SWPB emulation handler [ 1.834281] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.841240] VDDIO_HDMI: supplied by vdd_5v0 [ 1.845766] vdd_sys: supplied by vdd_5v0 [ 1.849823] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.854876] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.861592] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.873092] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.879561] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.885156] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.893452] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.910638] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.920334] hub 3-0:1.0: USB hub found [ 1.924227] hub 3-0:1.0: 1 port detected [ 1.938473] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.945157] [drm] No driver support for vblank timestamp query. [ 2.019877] Console: switching to colour frame buffer device 170x48 [ 2.038832] drm drm: fb0: frame buffer device [ 2.070607] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.077693] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.085248] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.104234] vdd_1v5: disabling [ 2.107285] vdd_1v2: disabling [ 2.110449] ALSA device list: [ 2.113444] #0: NVIDIA Tegra Seaboard [ 2.379392] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.392019] EXT4-fs (mmcblk0p3): mounting ext3 file system using the ext4 subsystem
[PYBOOT] [seaboard 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:45]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:47]: Done.
========================================================================
Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.494323] iio iio:device1: registered pressure sensor lps001wp [ 2.500762] coresight-tpiu 80190000.tpiu: TPIU initialized [ 2.506652] coresight-etb10 801a4000.etb: ETB initialized [ 2.512420] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.518798] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.526123] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.532348] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.544769] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.555480] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.565277] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.575988] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.599670] NET: Registered protocol family 10 [ 2.615844] sit: IPv6 over IPv4 tunneling driver [ 2.622009] NET: Registered protocol family 17 [ 2.626525] NET: Registered protocol family 35 [ 2.631225] NET: Registered protocol family 37 [ 2.635894] Registering SWP/SWPB emulation handler [ 2.652618] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.659790] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-03-24 11:09:54 UTC (953896194) [ 2.669494] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.676574] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.683593] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.690582] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.704620] db8500-esram12: disabling [ 2.708343] db8500-esram34: disabling [ 2.712310] V-CSI/DSI: disabling [ 2.715576] mmci-reg: disabling [ 2.718872] ALSA device list: [ 2.721862] #0: MOP500-card [ 2.725189] uart-pl011 80007000.uart: DMA channel TX dma0chan12 [ 2.731170] uart-pl011 80007000.uart: DMA channel RX dma0chan13 [ 2.739044] EXT4-fs (mmcblk0p4): couldn't mount as ext3 due to feature incompatibilities [ 2.760253] unexpected IRQ trap at vector 00
[PYBOOT] [snowball 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:56]: got exception: timeout ~$off
[PYBOOT] [snowball 01:57]: Done.
========================================================================
Board socfpga-arm-socfpga_defconfig failure log: -------------------------------------------------
[ 1.589526] mousedev: PS/2 mouse device common for all mice [ 1.595319] i2c /dev entries driver [ 1.599357] Synopsys Designware Multimedia Card Interface Driver [ 1.605566] dw_mmc ff704000.dwmmc0: IDMAC supports 32-bit address mode. [ 1.612185] dw_mmc ff704000.dwmmc0: Using internal DMA controller. [ 1.618362] dw_mmc ff704000.dwmmc0: Version ID is 240a [ 1.623537] dw_mmc ff704000.dwmmc0: DW MMC controller at irq 30,32 bit host data width,1024 deep fifo [ 1.632838] dw_mmc ff704000.dwmmc0: Got CD GPIO [ 1.673439] dw_mmc ff704000.dwmmc0: 1 slots initialized [ 1.678902] usbcore: registered new interface driver usbhid [ 1.684483] usbhid: USB HID core driver [ 1.688513] fpga_manager fpga0: Altera SOCFPGA FPGA Manager registered [ 1.695234] oprofile: no performance counters [ 1.699653] oprofile: using timer interrupt. [ 1.704924] NET: Registered protocol family 10 [ 1.710035] sit: IPv6 over IPv4 tunneling driver [ 1.715226] NET: Registered protocol family 17 [ 1.719689] NET: Registered protocol family 15 [ 1.724147] can: controller area network core (rev 20120528 abi 9) [ 1.730358] NET: Registered protocol family 29 [ 1.734808] can: raw protocol (rev 20120528) [ 1.739063] can: broadcast manager protocol (rev 20120528 t) [ 1.744721] can: netlink gateway (rev 20130117) max_hops=1 [ 1.750351] 8021q: 802.1Q VLAN Support v1.8 [ 1.754623] ThumbEE CPU extension supported. [ 1.758894] Registering SWP/SWPB emulation handler [ 1.766441] ttyS0 - failed to request DMA [ 1.770482] Waiting for root device /dev/mmcblk0p2... [ 1.791839] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.801602] mmc0: new high speed SDHC card at address 0002 [ 1.807536] mmcblk0: mmc0:0002 SD8GB 7.43 GiB [ 1.813951] mmcblk0: p1 p2 p3 [ 1.884885] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
[PYBOOT] [socfpga 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [socfpga 01:50]: got exception: timeout ~$off
[PYBOOT] [socfpga 01:51]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 1.932335] caam 2100000.caam: job rings = 2, qi = 0 [ 1.951182] caam algorithms registered in /proc/crypto [ 1.961316] caam_jr 2101000.jr0: registering rng-caam [ 1.967077] usbcore: registered new interface driver usbhid [ 1.972659] usbhid: USB HID core driver [ 1.981233] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 2.039531] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 2.045942] fsl-asoc-card sound: snd_soc_register_card failed (-517) [ 2.054456] fsl-asrc 2034000.asrc: driver registered [ 2.250945] mmc2: host does not support reading read-only switch, assuming write-enable [ 2.265008] mmc2: new high speed SDHC card at address 0001 [ 2.271788] mmcblk1: mmc2:0001 00000 7.61 GiB [ 2.277975] mmcblk1: p1 p2 [ 2.684642] sgtl5000 1-000a: Using internal LDO instead of VDDD [ 2.709718] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 2.722814] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 2.734664] NET: Registered protocol family 10 [ 2.741938] sit: IPv6 over IPv4 tunneling driver [ 2.748609] NET: Registered protocol family 17 [ 2.753137] can: controller area network core (rev 20120528 abi 9) [ 2.759484] NET: Registered protocol family 29 [ 2.763982] can: raw protocol (rev 20120528) [ 2.768336] can: broadcast manager protocol (rev 20120528 t) [ 2.774058] can: netlink gateway (rev 20130117) max_hops=1 [ 2.780200] Key type dns_resolver registered [ 2.791591] Registering SWP/SWPB emulation handler [ 2.802353] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C [ 2.815858] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 2.863855] ALSA device list: [ 2.866844] #0: imx6-wandboard-sgtl5000 [ 2.870862] #1: imx-spdif [ 2.884514] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.901945] Internal error: Oops - bad syscall: ee243c5c [#1] SMP ARM 8®À€RÀ€RÀ}8Å`²ÀPü°Àd-sa\²À`²À8²ÀøQÀ€Q [PYBOOT] [wandboard 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 01:42]: got exception: timeout ~$off
[PYBOOT] [wandboard 01:43]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter