Full logs are available at http://arm-soc.lixom.net/bootlogs/stable-rc/v4.4.37-24-gdc384c3/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:28.41 bbb arm-omap2plus_defconfig : FAILED 1:53.48 bbb arm-multi_v7_defconfig : FAILED 1:54.33 bbb arm-multi_v7_nosmp_defconfig : FAILED 1:58.69 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.59 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.53 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:52.00 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:52.25 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.34 jetsontx1 arm64-defconfig : NO DTB jetsontx1 arm64-nosmp_defconfig : NO DTB odroidu3 arm-exynos_defconfig : FAILED 1:53.54 odroidu3 arm-multi_v7_defconfig : FAILED 0:31.01 seaboard arm-tegra_defconfig : FAILED 1:50.48 seaboard arm-multi_v7_defconfig : FAILED 2:12.03 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:49.64 trimslice arm-multi_v7_nosmp_defconfig : FAILED 3:18.69

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:13.57 arndale arm-exynos_defconfig : warnings 1:32.23 arndale arm-multi_v7_defconfig : passed 1:21.58 arndale arm-multi_lpae_defconfig : passed 1:44.57 capri arm-multi_v7_defconfig : passed 0:45.75 capri arm-multi_v7_nosmp_defconfig : warnings 1:08.17 chitra powerpc-pasemi_defconfig : passed 2:25.42 chitra powerpc-ppc64_defconfig : passed 3:09.62 colombus arm-sunxi_defconfig : passed 1:57.80 colombus arm-multi_v7_defconfig : passed 2:15.07 colombus arm-multi_lpae_defconfig : passed 2:11.50 cosmic arm-imx_v6_v7_defconfig : passed 3:19.84 cosmic arm-multi_v7_defconfig : passed 3:09.78 cosmic arm-multi_v7_nosmp_defconfig : passed 2:42.38 cubie arm-sunxi_defconfig : passed 0:52.15 cubie arm-multi_v7_defconfig : passed 0:53.13 cubie arm-multi_v7_nosmp_defconfig : passed 0:53.64 cubie2 arm-sunxi_defconfig : passed 0:50.66 cubie2 arm-multi_v7_defconfig : passed 1:00.32 cubie2 arm-multi_lpae_defconfig : passed 1:03.14 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:59.42 cubox arm-multi_v7_defconfig : passed 1:11.27 cubox arm-mvebu_v7_defconfig : passed 1:28.49 cubox arm-multi_v7_nosmp_defconfig : passed 1:19.43 jetsontk1 arm-tegra_defconfig : passed 1:33.85 jetsontk1 arm-multi_v7_defconfig : passed 1:36.65 jetsontk1 arm-multi_lpae_defconfig : passed 1:41.76 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:41.21 minnowmax x86-minnowmax_defconfig : passed 2:19.07 pandaes arm-omap2plus_defconfig : warnings 1:39.91 pandaes arm-multi_v7_defconfig : passed 1:53.02 pandaes arm-multi_v7_nosmp_defconfig : warnings 3:07.62 parallella arm-multi_v7_defconfig : passed 3:08.16 parallella arm-multi_v7_nosmp_defconfig : warnings 2:37.18 pi arm-exynos_defconfig : passed 1:27.04 pi arm-multi_v7_defconfig : passed 1:33.47 pi arm-multi_lpae_defconfig : passed 1:51.82 pi arm-multi_v7_nosmp_defconfig : warnings 1:50.12 pit arm-exynos_defconfig : passed 1:31.16 pit arm-multi_v7_defconfig : passed 1:34.67 pit arm-multi_lpae_defconfig : passed 2:11.17 pit arm-multi_v7_nosmp_defconfig : warnings 1:33.72 seattle arm64-defconfig : passed 2:31.11 seattle arm64-nosmp_defconfig : passed 2:10.99 trimslice arm-tegra_defconfig : passed 1:32.70 trimslice arm-multi_v7_defconfig : passed 2:35.95 wandboard arm-imx_v6_v7_defconfig : passed 1:13.80 wandboard arm-multi_v7_defconfig : passed 1:01.74 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:33.97

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 0:02.61 beaver arm-multi_v7_defconfig : OFFLINE 0:03.32 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 0:04.13 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.57 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:16.50 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:17.53 dalmore arm-tegra_defconfig : OFFLINE 0:02.88 dalmore arm-multi_v7_defconfig : OFFLINE 0:02.86 dalmore arm-multi_lpae_defconfig : OFFLINE 0:04.05 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 0:02.94 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:24.74 hummingboard arm-multi_v7_defconfig : OFFLINE 2:24.45 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.39 omap5uevm arm-omap2plus_defconfig : OFFLINE 0:02.55 omap5uevm arm-multi_v7_defconfig : OFFLINE 0:03.57 omap5uevm arm-multi_lpae_defconfig : OFFLINE 0:04.09 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 0:03.57 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:57.17 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:48.64 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:47.60 sama5 arm-sama5_defconfig : OFFLINE 2:15.12 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:28.23 snow arm-exynos_defconfig : OFFLINE 2:30.56 snow arm-multi_v7_defconfig : OFFLINE 2:23.41 snow arm-multi_lpae_defconfig : OFFLINE 2:13.12 snow arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.02 snowball arm-u8500_defconfig : OFFLINE 0:06.59 snowball arm-multi_v7_defconfig : OFFLINE 0:04.32 snowball arm-multi_v7_nosmp_defconfig : OFFLINE 0:07.02 socfpga arm-socfpga_defconfig : OFFLINE 2:24.28 socfpga arm-multi_v7_defconfig : OFFLINE 2:22.66 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.25

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.106581] dwmmc_exynos 12220000.mmc: Version ID is 241a [ 2.111962] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 102,32 bit host data width,128 deep fifo [ 2.121447] dwmmc_exynos 12220000.mmc: No vqmmc regulator found [ 2.154299] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 2.158799] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.165044] ledtrig-cpu: registered to indicate activity on CPUs [ 2.170047] usbcore: registered new interface driver usbhid [ 2.175493] usbhid: USB HID core driver [ 2.181607] NET: Registered protocol family 10 [ 2.184993] sit: IPv6 over IPv4 tunneling driver [ 2.189476] NET: Registered protocol family 17 [ 2.193601] can: controller area network core (rev 20120528 abi 9) [ 2.199795] NET: Registered protocol family 29 [ 2.204188] can: raw protocol (rev 20120528) [ 2.208447] can: broadcast manager protocol (rev 20120528 t) [ 2.214090] can: netlink gateway (rev 20130117) max_hops=1 [ 2.219748] Key type dns_resolver registered [ 2.224061] ThumbEE CPU extension supported. [ 2.229061] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.235531] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.241163] hctosys: unable to open rtc device (rtc0) [ 2.249741] MAIN_DC: disabling [ 2.251315] hdmi-en: disabling [ 2.254742] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.38-rc1-00024-gdc384c3 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Fri Dec 9 02:20:54 PST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192

[PYBOOT] [arndale 02:25]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:26]: got exception: timeout ~$off

[PYBOOT] [arndale 02:27]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.529539] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.595673] Synopsys Designware Multimedia Card Interface Driver [ 1.603466] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.613055] ledtrig-cpu: registered to indicate activity on CPUs [ 1.619881] usbcore: registered new interface driver usbhid [ 1.625778] usbhid: USB HID core driver [ 1.636448] NET: Registered protocol family 10 [ 1.642954] sit: IPv6 over IPv4 tunneling driver [ 1.649102] NET: Registered protocol family 17 [ 1.653870] can: controller area network core (rev 20120528 abi 9) [ 1.660510] NET: Registered protocol family 29 [ 1.665232] can: raw protocol (rev 20120528) [ 1.669751] can: broadcast manager protocol (rev 20120528 t) [ 1.675745] can: netlink gateway (rev 20130117) max_hops=1 [ 1.682427] Key type dns_resolver registered [ 1.687299] omap_voltage_late_init: Voltage driver support not added [ 1.695437] ThumbEE CPU extension supported. [ 1.700054] Registering SWP/SWPB emulation handler [ 1.714069] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.721821] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.730223] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.737892] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.745488] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.753050] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.760365] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.768554] hctosys: unable to open rtc device (rtc0) [ 1.783134] Waiting for root device /dev/mmcblk1p2... [ 1.817682] mmc1: MAN_BKOPS_EN bit is not set [ 1.824200] mmc1: new high speed MMC card at address 0001 [ 1.830855] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.836066] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.842657] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.851165] mmcblk0: p1 p2

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.349747] sdhci: Copyright(c) Pierre Ossman [ 1.355499] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.418804] Synopsys Designware Multimedia Card Interface Driver [ 1.426303] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.435339] ledtrig-cpu: registered to indicate activity on CPUs [ 1.442053] usbcore: registered new interface driver usbhid [ 1.447932] usbhid: USB HID core driver [ 1.457206] NET: Registered protocol family 10 [ 1.463705] sit: IPv6 over IPv4 tunneling driver [ 1.469633] NET: Registered protocol family 17 [ 1.474368] can: controller area network core (rev 20120528 abi 9) [ 1.480965] NET: Registered protocol family 29 [ 1.485661] can: raw protocol (rev 20120528) [ 1.490174] can: broadcast manager protocol (rev 20120528 t) [ 1.496151] can: netlink gateway (rev 20130117) max_hops=1 [ 1.502766] Key type dns_resolver registered [ 1.507543] omap_voltage_late_init: Voltage driver support not added [ 1.515379] ThumbEE CPU extension supported. [ 1.527636] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.535262] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.543038] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.550563] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.558056] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.565537] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.572810] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.580413] hctosys: unable to open rtc device (rtc0) [ 1.591429] Waiting for root device /dev/mmcblk1p2... [ 1.625901] mmc1: MAN_BKOPS_EN bit is not set [ 1.632283] mmc1: new high speed MMC card at address 0001 [ 1.638723] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.643789] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.650262] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.658509] mmcblk0: p1 p2

[PYBOOT] [bbb 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:56]: got exception: timeout ~$off

[PYBOOT] [bbb 01:58]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.057888] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.064222] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.071105] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.080710] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.090221] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.097246] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.140750] ledtrig-cpu: registered to indicate activity on CPUs [ 2.148916] oprofile: using arm/armv7 [ 2.154121] Initializing XFRM netlink socket [ 2.159209] NET: Registered protocol family 10 [ 2.169643] sit: IPv6 over IPv4 tunneling driver [ 2.178435] NET: Registered protocol family 17 [ 2.183370] NET: Registered protocol family 15 [ 2.188658] Key type dns_resolver registered [ 2.193601] omap_voltage_late_init: Voltage driver support not added [ 2.200352] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.208827] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.219126] ThumbEE CPU extension supported. [ 2.223785] Registering SWP/SWPB emulation handler [ 2.228826] SmartReflex Class3 initialized [ 2.298172] mmc1: MAN_BKOPS_EN bit is not set [ 2.307964] mmc1: new high speed MMC card at address 0001 [ 2.321635] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 2.332449] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.339657] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.346917] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.355886] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.369262] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.379903] mmcblk0: p1 p2 [ 2.385666] hctosys: unable to open rtc device (rtc0) [ 2.391163] sr_init: No PMIC hook to init smartreflex [ 2.396838] sr_init: platform driver register failed for SR [ 2.453179] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:51]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.571514] NET: Registered protocol family 10 [ 1.576791] sit: IPv6 over IPv4 tunneling driver [ 1.582068] NET: Registered protocol family 17 [ 1.586733] can: controller area network core (rev 20120528 abi 9) [ 1.593238] NET: Registered protocol family 29 [ 1.597906] can: raw protocol (rev 20120528) [ 1.602382] can: broadcast manager protocol (rev 20120528 t) [ 1.608312] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614353] Key type dns_resolver registered [ 1.618905] omap_voltage_late_init: Voltage driver support not added [ 1.626053] Power Management for TI OMAP4+ devices. [ 1.631363] ThumbEE CPU extension supported. [ 1.635860] Registering SWP/SWPB emulation handler [ 1.642672] palmas 0-0058: Irq flag is 0x00000008 [ 1.667211] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698777] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.712939] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735499] rtc-ds1307 2-006f: SET TIME! [ 1.741270] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.748029] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752633] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761445] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.795970] vdd_3v3: supplied by regen1 [ 1.836905] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.854000] aic_dvdd_fixed: disabling [ 1.858008] ldousb: disabling [ 1.862038] Waiting for root device /dev/mmcblk1p1... [ 1.869586] mmc1: MAN_BKOPS_EN bit is not set [ 1.881560] mmc1: new high speed MMC card at address 0001 [ 1.887542] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892431] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898787] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905659] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:49]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:50]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.571423] NET: Registered protocol family 10 [ 1.576691] sit: IPv6 over IPv4 tunneling driver [ 1.581960] NET: Registered protocol family 17 [ 1.586620] can: controller area network core (rev 20120528 abi 9) [ 1.593127] NET: Registered protocol family 29 [ 1.597785] can: raw protocol (rev 20120528) [ 1.602256] can: broadcast manager protocol (rev 20120528 t) [ 1.608187] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614223] Key type dns_resolver registered [ 1.618773] omap_voltage_late_init: Voltage driver support not added [ 1.625921] Power Management for TI OMAP4+ devices. [ 1.631230] ThumbEE CPU extension supported. [ 1.635716] Registering SWP/SWPB emulation handler [ 1.642525] palmas 0-0058: Irq flag is 0x00000008 [ 1.667122] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698598] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.712715] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735432] rtc-ds1307 2-006f: SET TIME! [ 1.741199] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.747953] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752557] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761383] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.795899] vdd_3v3: supplied by regen1 [ 1.836814] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.853916] aic_dvdd_fixed: disabling [ 1.857925] ldousb: disabling [ 1.861960] Waiting for root device /dev/mmcblk1p1... [ 1.869527] mmc1: MAN_BKOPS_EN bit is not set [ 1.881542] mmc1: new high speed MMC card at address 0001 [ 1.887524] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892415] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898771] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905636] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.456052] NET: Registered protocol family 10 [ 1.461297] sit: IPv6 over IPv4 tunneling driver [ 1.466473] NET: Registered protocol family 17 [ 1.471136] can: controller area network core (rev 20120528 abi 9) [ 1.477633] NET: Registered protocol family 29 [ 1.482291] can: raw protocol (rev 20120528) [ 1.486763] can: broadcast manager protocol (rev 20120528 t) [ 1.492692] can: netlink gateway (rev 20130117) max_hops=1 [ 1.498648] Key type dns_resolver registered [ 1.503189] omap_voltage_late_init: Voltage driver support not added [ 1.510129] Power Management for TI OMAP4+ devices. [ 1.515394] ThumbEE CPU extension supported. [ 1.519975] ata1: SATA link down (SStatus 0 SControl 300) [ 1.526891] palmas 0-0058: Irq flag is 0x00000008 [ 1.551534] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.579668] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.592961] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.615101] rtc-ds1307 2-006f: SET TIME! [ 1.620722] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.627418] rtc-ds1307 2-006f: 64 bytes nvram [ 1.632009] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.639820] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.675295] vdd_3v3: supplied by regen1 [ 1.710451] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.723028] aic_dvdd_fixed: disabling [ 1.727024] ldousb: disabling [ 1.730813] Waiting for root device /dev/mmcblk1p1... [ 1.769210] mmc1: MAN_BKOPS_EN bit is not set [ 1.781160] mmc1: new high speed MMC card at address 0001 [ 1.787034] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.791863] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.798149] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.804891] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:50]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:51]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.178132] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.188501] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.193362] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.199656] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.206511] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.216103] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.225598] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.232642] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.282873] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.289167] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296029] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.305619] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315113] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.322158] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.328273] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.334578] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.341466] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351089] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.360597] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.367674] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.374477] vdd_3v3: supplied by regen1 [ 2.413120] hctosys: unable to open rtc device (rtc0) [ 2.418424] sr_init: No PMIC hook to init smartreflex [ 2.423938] sr_init: platform driver register failed for SR [ 2.474384] aic_dvdd_fixed: disabling [ 2.481644] ldousb: disabling [ 2.487844] Waiting for root device /dev/mmcblk1p1... [ 2.527090] mmc1: MAN_BKOPS_EN bit is not set [ 2.539316] mmc1: new high speed MMC card at address 0001 [ 2.546771] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.552224] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.559055] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.567313] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 40.416959] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 81.356940] random: dd: uninitialized urandom read (512 bytes read, 52 bits of entropy available) [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 85.832131] eth0: device MAC address ae:07:b3:31:0a:f0 [ 85.977026] RX IPC Checksum Offload disabled [ 85.981653] No MAC Management Counters available Listening on LPF/eth0/ae:07:b3:31:0a:f0 Sending on LPF/eth0/ae:07:b3:31:0a:f0 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 No DHCPOFFERS received. No working leases in persistent database - sleeping. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2.

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.938435] usbcore: registered new interface driver usbhid [ 1.942808] usbhid: USB HID core driver [ 1.953850] NET: Registered protocol family 10 [ 1.954911] sit: IPv6 over IPv4 tunneling driver [ 1.958135] NET: Registered protocol family 17 [ 1.961704] NET: Registered protocol family 15 [ 1.966347] Registering SWP/SWPB emulation handler [ 1.972735] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.976798] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.994996] mmc1: MAN_BKOPS_EN bit is not set [ 1.996315] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 2.003652] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 2.013518] mmc1: new DDR MMC card at address 0001 [ 2.017999] max98090 1-0010: MAX98090 REVID=0x43 [ 2.025001] max98090 1-0010: use default 2.8v micbias [ 2.027787] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 2.032748] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 2.038794] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.046101] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.052790] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.057795] hub 1-3:1.0: USB hub found [ 2.061874] hub 1-3:1.0: 3 ports detected [ 2.065580] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.072682] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.073906] mmcblk0: p1 p2 [ 2.083910] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.112959] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.137155] VDD10_HDMI_1.0V: disabling [ 2.137950] vdd_g3d: disabling [ 2.139008] BUCK8_2.8V: disabling [ 2.143078] ALSA device list: [ 2.144541] #0: Odroid-U3 [ 2.148360] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [odroidu3 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:51]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:53]: Done. Board odroidu3-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.823985] [<c0215394>] (__irq_svc) from [<c0211630>] (arch_cpu_idle+0x38/0x3c) [ 1.831359] [<c0211630>] (arch_cpu_idle) from [<c0280b1c>] (cpu_startup_entry+0x1ec/0x248) [ 1.839595] [<c0280b1c>] (cpu_startup_entry) from [<c0dfbc78>] (start_kernel+0x3a8/0x3b4) [ 1.847745] [<c0dfbc78>] (start_kernel) from [<4020807c>] (0x4020807c) [ 1.854246] CPU3: stopping [ 1.856937] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.4.38-rc1-00024-gdc384c3 #1 [ 1.864479] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 1.870565] [<c021913c>] (unwind_backtrace) from [<c0214838>] (show_stack+0x10/0x14) [ 1.878277] [<c0214838>] (show_stack) from [<c0489a2c>] (dump_stack+0x98/0xac) [ 1.885474] [<c0489a2c>] (dump_stack) from [<c02178b4>] (handle_IPI+0x188/0x1a8) [ 1.892844] [<c02178b4>] (handle_IPI) from [<c020a75c>] (gic_handle_irq+0x94/0x98) [ 1.900389] [<c020a75c>] (gic_handle_irq) from [<c0215394>] (__irq_svc+0x54/0x70) [ 1.907843] Exception stack(0xee0b1f80 to 0xee0b1fc8) [ 1.912878] 1f80: 00000001 00000000 00000000 c0223900 c0f064a4 00000000 00000000 ee0b1fd8 [ 1.921030] 1fa0: c0f06504 c09fa5c8 ee0b0000 c0f0650c 2e0ba000 ee0b1fd0 c021162c c0211630 [ 1.929178] 1fc0: 60000053 ffffffff [ 1.932653] [<c0215394>] (__irq_svc) from [<c0211630>] (arch_cpu_idle+0x38/0x3c) [ 1.940026] [<c0211630>] (arch_cpu_idle) from [<c0280b1c>] (cpu_startup_entry+0x1ec/0x248) [ 1.948262] [<c0280b1c>] (cpu_startup_entry) from [<4020ab6c>] (0x4020ab6c) [ 1.955197] CPU2: stopping [ 1.957888] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.4.38-rc1-00024-gdc384c3 #1 [ 1.965429] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 1.971515] [<c021913c>] (unwind_backtrace) from [<c0214838>] (show_stack+0x10/0x14) [ 1.979228] [<c0214838>] (show_stack) from [<c0489a2c>] (dump_stack+0x98/0xac) [ 1.986424] [<c0489a2c>] (dump_stack) from [<c02178b4>] (handle_IPI+0x188/0x1a8) [ 1.993794] [<c02178b4>] (handle_IPI) from [<c020a75c>] (gic_handle_irq+0x94/0x98) [ 2.001339] [<c020a75c>] (gic_handle_irq) from [<c0215394>] (__irq_svc+0x54/0x70) [ 2.008793] Exception stack(0xee0aff80 to 0xee0affc8) [ 2.013829] ff80: 00000001 00000000 00000000 c0223900 c0f064a4 00000000 00000000 ee0affd8 [ 2.021980] ffa0: c0f06504 c09fa5c8 ee0ae000 c0f0650c 2e0ae000 ee0affd0 c021162c c0211630 [ 2.030128] ffc0: 60000053 ffffffff [ 2.033604] [<c0215394>] (__irq_svc) from [<c0211630>] (arch_cpu_idle+0x38/0x3c) [ 2.040977] [<c0211630>] (arch_cpu_idle) from [<c0280b1c>] (cpu_startup_entry+0x1ec/0x248) [ 2.049213] [<c0280b1c>] (cpu_startup_entry) from [<4020ab6c>] (0x4020ab6c) [ 2.056152] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

[PYBOOT] [odroidu3 00:29]: got exception: panic ~$off

[PYBOOT] [odroidu3 00:30]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.679866] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.686296] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.697460] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.703933] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.709358] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.717123] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.723068] mmc2: switch to bus width 2 failed [ 1.728173] mmc2: switch to bus width 1 failed [ 1.728687] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.738570] mmc2: new high speed MMC card at address 0001 [ 1.744519] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.744744] hub 3-0:1.0: USB hub found [ 1.744790] hub 3-0:1.0: 1 port detected [ 1.757077] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.763192] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.770353] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.776991] [drm] No driver support for vblank timestamp query. [ 1.794997] mmcblk0: p3 [ 1.853531] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.854883] Console: switching to colour frame buffer device 170x48 [ 1.861813] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.864823] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.872500] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.900268] drm drm: fb0: frame buffer device [ 1.918216] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.923754] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.933817] mmc0: new SDIO card at address 0001 [ 1.939850] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.946925] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.961551] vdd_1v5: disabling [ 1.964634] vdd_1v2: disabling [ 2.487005] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.498165] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 02:10]: got exception: timeout ~$off

[PYBOOT] [seaboard 02:11]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.650967] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.657348] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667721] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674186] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679599] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687341] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699411] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.705954] hub 3-0:1.0: USB hub found [ 1.709743] hub 3-0:1.0: 1 port detected [ 1.716998] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.723611] [drm] No driver support for vblank timestamp query. [ 1.823356] Console: switching to colour frame buffer device 170x48 [ 1.842154] mmc2: switch to bus width 2 failed [ 1.846638] drm drm: fb0: frame buffer device [ 1.851103] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.856865] mmc2: switch to bus width 1 failed [ 1.861318] mmc2: new high speed MMC card at address 0001 [ 1.867667] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.874424] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.879007] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.890890] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.896843] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.903113] vdd_1v5: disabling [ 1.906196] vdd_1v2: disabling [ 1.909688] mmcblk0: p3 [ 1.963039] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.976649] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.984993] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.997762] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.032894] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.041651] mmc0: new SDIO card at address 0001 [ 2.509522] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.520622] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.807435] Key type dns_resolver registered [ 1.813341] Registering SWP/SWPB emulation handler [ 1.818915] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.829873] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.842115] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.847965] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.854591] VDDIO_HDMI: supplied by vdd_5v0 [ 1.859103] vdd_sys: supplied by vdd_5v0 [ 1.863219] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.868238] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.868490] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.875207] mmc0: new SDIO card at address 0001 [ 1.884965] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.896498] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.903001] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.908471] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.916722] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.940787] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.950481] hub 3-0:1.0: USB hub found [ 1.954845] hub 3-0:1.0: 1 port detected [ 1.967092] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.973732] [drm] No driver support for vblank timestamp query. [ 2.070468] Console: switching to colour frame buffer device 170x48 [ 2.093598] drm drm: fb0: frame buffer device [ 2.120758] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.128295] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.136197] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 2.158322] vdd_1v5: disabling [ 2.161408] vdd_1v2: disabling [ 2.164604] ALSA device list: [ 2.167565] #0: NVIDIA Tegra Seaboard [ 2.370585] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.381799] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done. Board trimslice-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

permitted by applicable law. root@trimslice:~# cat /proc/cmdline cat /proc/cmdline console=ttyS0,115200 root=/dev/sda1 rootwait rw root@trimslice:~# uname -r uname -r 4.4.38-rc1-00024-gdc384c3 root@trimslice:~# cat /proc/cpuinfo cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 0 (v7l) BogoMIPS : 0.43 Features : half thumb fastmult vfp edsp thumbee vfpv3 vfpv3d16 tls CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x1 CPU part : 0xc09 CPU revision : 0

Hardware : NVIDIA Tegra SoC (Flattened Device Tree) Revision : 0000 Serial : 0000000000000000 root@trimslice:~# ip -f inet -o addr ip -f inet -o addr 1: lo inet 127.0.0.1/8 scope host lo\ valid_lft fopeter prederred_ldt forevep48 eth1 inet 172.16.20.111/24 brd 172.16.20.255 scope global eth1\ talid_lft fopever ppedepred_ldt forever root@trimslice:~# dmesg -l err | awk '{ print "[ERR] " $0 }' dmesg -l err | awk '{ print "[ERR] $0 }' [ERR] [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ERR] [ 0.033143] usb1_vbus: Failed to request enable GPIO170: -517 [ERR] [ 0.033212] reg-fixed-voltage regulators:regulator@2: Failed to register regulator: -517 [ERR] [ 1.746809] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ERR] [ 4.329482] sd 0:0:0:0: [sda] No Caching mode page found [ERR] [ 4.334865] sd 0:0:0:0: [sda] Assuming drive cache: write through [ERR] [ 4.397090] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ERR] [ 4.406081] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities rmot@trimslice:~# [PYBOOT] [trimslice 03:16]: got exception: ERROR: Timeout waiting for command: dmesg -l err | awk '{ print "[ERR] " $0 }'. ~$off

[PYBOOT] [trimslice 03:17]: Done.