Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

mainline boot: 15 passed 0 failed (mainline/v3.12-rc7-65-g026f8f6)

by Olof's autobooter

arndale : passed 0:49.99 bbb : passed 1:54.80 beaver : passed 0:50.71 multi-beaver : passed 0:32.26 cubie : passed 1:03.79 cubie2 : passed 0:55.53 cubox : passed 0:50.73 panda : passed 2:49.30 multi-panda : passed 2:51.87 sama5 : passed 1:33.29 snowball : passed 1:12.85 multi-snowball : passed 0:37.69 multi-trimslice : passed 0:32.89 wandboard : passed 1:08.18 multi-wandboard : passed 0:35.33 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

11 years, 6 months

mainline build: 16 warnings 0 failures (mainline/v3.12-rc7-65-g026f8f6)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 026f8f6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.12-rc7-65-g026f8f6/ Runtime: 38m 15s Passed: 117 Failed: 0 Warnings: 16 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 6 months

arm-soc boot: 30 pass, 1 fail (v3.12-rc5-895-gc1b35c6)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.12-rc5-895-gc1b35c6 Failed boot tests (console logs at the end) =========================================== sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.7 sec omap3-beagle-xm PASS: 0 min 51.5 sec am335x-bone PASS: 0 min 26.4 sec omap4-panda PASS: 1 min 4.4 sec omap4-panda-es PASS: 1 min 9.4 sec omap3-tobi,3730storm PASS: 0 min 20.6 sec omap3-tobi,3530overo PASS: 0 min 21.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.6 sec imx6q-wandboard PASS: 0 min 16.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.5 sec tegra30-beaver PASS: 0 min 22.2 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 49.4 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 9.0 sec omap4-panda-es PASS: 1 min 8.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard FAIL: 0 min 7.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.7 sec omap3-tobi,3530overo PASS: 0 min 19.9 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec Console logs for failures ========================= multi_v7_defconfig ------------------ sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.95 seconds. # PYBOOT: Result: FAIL

11 years, 6 months

arm-soc boot: 15 passed 0 failed (arm-soc/v3.12-rc5-895-gc1b35c6)

by Olof's autobooter

arndale : passed 0:48.72 bbb : passed 1:50.44 beaver : passed 0:52.02 multi-beaver : passed 0:31.86 cubie2 : passed 0:53.18 cubie : passed 0:53.11 cubox : passed 0:53.06 panda : passed 2:58.81 multi-panda : passed 2:50.52 sama5 : passed 1:40.13 snowball : passed 0:50.85 multi-snowball : passed 0:42.27 multi-trimslice : passed 0:31.19 wandboard : passed 0:57.24 multi-wandboard : passed 0:35.79 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

11 years, 6 months

arm-soc build: 18 warnings 0 failures (arm-soc/v3.12-rc5-895-gc1b35c6)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: c1b35c6 Merge branch 'next/dt' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.12-rc5-895-gc1b35c6/ Runtime: 38m 52s Passed: 118 Failed: 0 Warnings: 18 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:965:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:965:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 5 net/core/secure_seq.c:17:13: warning: 'net_secret_init' defined but not used [-Wunused-function] Section mismatches:

11 years, 6 months

next boot: 1 pass, 30 fail (next-20131031)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20131031 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig am335x-bone: FAIL: omap2plus_defconfig omap4-panda: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig omap3-tobi,3730storm: FAIL: omap2plus_defconfig omap3-tobi,3530overo: FAIL: omap2plus_defconfig tegra30-beaver: FAIL: tegra_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig omap3-tobi,3530overo: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack FAIL: 0 min 30.5 sec omap3-beagle-xm FAIL: 0 min 44.8 sec am335x-bone FAIL: 0 min 29.4 sec omap4-panda FAIL: 0 min 56.0 sec omap4-panda-es FAIL: 0 min 55.4 sec omap3-tobi,3730storm FAIL: 0 min 28.2 sec omap3-tobi,3530overo FAIL: 0 min 27.1 sec tegra_defconfig --------------- tegra30-beaver FAIL: 0 min 12.7 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual FAIL: 0 min 22.2 sec imx6dl-wandboard,wand-solo FAIL: 0 min 22.1 sec imx6q-wandboard FAIL: 0 min 20.2 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 28.9 sec armada-370-mirabox FAIL: 0 min 27.8 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 33.4 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 29.7 sec tegra30-beaver FAIL: 0 min 23.9 sec am335x-boneblack FAIL: 0 min 30.1 sec omap3-beagle-xm FAIL: 0 min 44.5 sec armada-370-mirabox FAIL: 0 min 28.6 sec omap4-panda FAIL: 0 min 55.3 sec omap4-panda-es FAIL: 0 min 57.3 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 30.4 sec sun4i-a10-cubieboard FAIL: 0 min 6.9 sec imx6dl-wandboard,wand-solo FAIL: 0 min 21.2 sec am335x-bone FAIL: 0 min 28.9 sec imx6q-wandboard FAIL: 0 min 19.9 sec omap3-tobi,3730storm FAIL: 0 min 28.1 sec imx6dl-wandboard,wand-dual FAIL: 0 min 21.2 sec omap3-tobi,3530overo FAIL: 0 min 26.7 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 28.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec Console logs for failures ========================= omap2plus_defconfig ------------------- am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- done Bytes transferred = 17911 (45f7 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 root=/dev/nfs nfsroot=192.168.1.2:/export/rootfs,nolock rw ip=dhcp U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19b000, end 9f237300 ... OK Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.54 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 24 lines of boot log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/3730xm-dzheqm/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *T ## 2 KiB/s done Bytes transferred = 14683 (395b hex) OMAP3 beagleboard.org #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffff95a ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.82 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- done Bytes transferred = 17315 (43a3 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.174:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19b000, end 8f237300 ... OK Using Device Tree in place at 81f00000, end 81f073a2 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.35 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- 2 KiB/s done Bytes transferred = 19948 (4dec hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.173:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f07deb Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 55.97 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ 2 KiB/s done Bytes transferred = 20188 (4edc hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.163:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f07edb Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 55.44 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/3730storm-fN5GAo/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *# 2 MiB/s done Bytes transferred = 14381 (382d hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffff82c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.21 seconds. # PYBOOT: Result: FAIL omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ done Bytes transferred = 14381 (382d hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff6282c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.08 seconds. # PYBOOT: Result: FAIL tegra_defconfig --------------- tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 0.000000] 3f00: 00000000 c07a7ce0 fe206000 00000000 c084d1ec fe30e400 00000000 c078f3f8 [ 0.000000] 3f20: fe206030 00000007 00000001 c084d1ec c084d1ec c07e9370 c07b3f2c c084d210 [ 0.000000] 3f40: 00000000 c1862924 c07f263c 00000004 00000001 c07f244c c084d1a0 c07906bc [ 0.000000] 3f60: 00000001 00000002 00000004 00000000 00000000 00000000 c07ac018 c1862924 [ 0.000000] 3f80: c07ac018 c07b2000 c07a06d8 c07ba380 ffffffff c1868880 00000000 c078e61c [ 0.000000] 3fa0: c07ae2e0 c07ac264 c07ba380 c0803140 c07ba380 c07753c0 80000001 c07729a0 [ 0.000000] 3fc0: ffffffff ffffffff c0772578 00000000 00000000 c07a06d8 10c5387d c07ba3cc [ 0.000000] 3fe0: c07a06d4 c07bee10 8000406a 412fc099 00000000 80008074 00000000 00000000 [ 0.000000] [<c03c4aec>] (_clk_register+0x1a0/0x208) from [<c03c4b8c>] (clk_register+0x38/0x70) [ 0.000000] [<c03c4b8c>] (clk_register+0x38/0x70) from [<c03c5890>] (clk_register_gate+0xac/0x108) [ 0.000000] [<c03c5890>] (clk_register_gate+0xac/0x108) from [<c078f3f8>] (tegra_super_clk_gen4_init+0x1a4/0x2d0) [ 0.000000] [<c078f3f8>] (tegra_super_clk_gen4_init+0x1a4/0x2d0) from [<c07906bc>] (tegra30_clock_init+0x754/0xaf4) [ 0.000000] [<c07906bc>] (tegra30_clock_init+0x754/0xaf4) from [<c078e61c>] (of_clk_init+0x40/0x60) [ 0.000000] [<c078e61c>] (of_clk_init+0x40/0x60) from [<c07753c0>] (time_init+0x28/0x30) [ 0.000000] [<c07753c0>] (time_init+0x28/0x30) from [<c07729a0>] (start_kernel+0x1f8/0x340) [ 0.000000] [<c07729a0>] (start_kernel+0x1f8/0x340) from [<80008074>] (0x80008074) [ 0.000000] Code: e5886000 e5934014 e3540000 1affffb7 (e5970000) [ 0.000000] ---[ end trace 13adc9301e6db314 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 # PYBOOT: Time: 12.72 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------ 1.5 MiB/s done Bytes transferred = 33645 (836d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.179:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none =>bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b36c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.17 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log: ------------------------------------------------------------ 1.4 MiB/s done Bytes transferred = 33645 (836d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.180:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b36c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.05 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Bytes transferred = 35284 (89d4 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.181:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4b1da0 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b9d3 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.25 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Image Name: Linux Created: 2013-10-31 11:15:51 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2699697 Bytes = 2.6 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.86 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2013-10-31 11:15:23 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2696054 Bytes = 2.6 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.76 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- tftp 0x407c0000 tmp/arndale-GPniWF/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.171 Filename 'tmp/arndale-GPniWF/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33005 (80ed hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.171:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb0ec Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.39 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- ################################################################# ###################################################### done Bytes transferred = 3649556 (37b014 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.184:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3649492 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.67 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ Bytes transferred = 20920 (51b8 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x376188 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830081b7 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 23.91 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 24 lines of boot log: -------------------------------------------------- done Bytes transferred = 17911 (45f7 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 root=/dev/nfs nfsroot=192.168.1.2:/export/rootfs,nolock rw ip=dhcp U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19b000, end 9f237300 ... OK Using Device Tree in place at 81f00000, end 81f075f6 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.08 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 24 lines of boot log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/3730xm-Cwtkd0/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *T ## 1000 Bytes/s done Bytes transferred = 14683 (395b hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org #bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffff95a ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.46 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2013-10-31 11:02:08 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3639158 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.56 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- 2 KiB/s done Bytes transferred = 19948 (4dec hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.173:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f07deb Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 55.28 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ 2 KiB/s done Bytes transferred = 20188 (4edc hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.163:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f07edb Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 57.30 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Image Name: Linux Created: 2013-10-31 11:05:22 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3642801 Bytes = 3.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.38 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.92 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 24 lines of boot log: ------------------------------------------------------------ 1.4 MiB/s done Bytes transferred = 33645 (836d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.180:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b36c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.21 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- done Bytes transferred = 17315 (43a3 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.174:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19b000, end 8f237300 ... OK Using Device Tree in place at 81f00000, end 81f073a2 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.86 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Bytes transferred = 35284 (89d4 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.181:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x376188 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b9d3 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.91 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/3730storm-M_Vbyr/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *# 2 MiB/s done Bytes transferred = 14381 (382d hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8fff9000, end 8ffff82c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.09 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------ 1.5 MiB/s done Bytes transferred = 33645 (836d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.179:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none =>bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b36c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.19 seconds. # PYBOOT: Result: FAIL omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ done Bytes transferred = 14381 (382d hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffff300 ... OK Loading Device Tree to 8ff5c000, end 8ff6282c ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 26.69 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- ################################################################# ### done Bytes transferred = 2897156 (2c3504 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.184:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2897092 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.25 seconds. # PYBOOT: Result: FAIL

11 years, 6 months

queue boot: 25 pass, 0 fail (v3.11.6-62-ge5b2bf3)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.11.6-62-ge5b2bf3 Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 52.8 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 3.3 sec omap4-panda-es PASS: 1 min 7.5 sec omap3-tobi,3730storm PASS: 0 min 20.7 sec omap3-tobi,3530overo PASS: 0 min 21.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 15.7 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 15.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 15.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ tegra30-beaver PASS: 0 min 17.3 sec omap3-beagle-xm PASS: 0 min 50.2 sec armada-370-mirabox PASS: 0 min 20.5 sec am335x-bone PASS: 0 min 33.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec omap4-panda PASS: 1 min 2.9 sec omap4-panda-es PASS: 1 min 2.2 sec omap3-tobi,3730storm PASS: 0 min 19.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 19.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 6 months

queue boot: 8 passed 5 failed (queue/v3.11.6-62-ge5b2bf3)

by Olof's autobooter

arndale : passed 0:49.81 bbb : FAILED 1:15.33 beaver : OFFLINE 0:30.54 multi-beaver : OFFLINE 0:30.48 cubie2 : FAILED 0:47.98 cubie : passed 0:48.61 cubox : passed 0:55.65 panda : passed 2:53.11 multi-panda : passed 2:45.45 sama5 : passed 1:38.46 snowball : passed 1:21.73 multi-snowball : FAILED 0:54.52 multi-trimslice : passed 0:55.97 wandboard : FAILED 0:40.98 multi-wandboard : FAILED 0:45.72 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4202/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.108 Filename '/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################### 625 KiB/s done Bytes transferred = 4091024 (3e6c90 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.108 Filename '/srv/tftp/queue/v3.11.6-62-ge5b2bf3/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2098/131068 bytes sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.154 Filename '/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.9 MiB/s done Bytes transferred = 3598248 (36e7a8 hex) sun7i# tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.154 Filename '/srv/tftp/queue/v3.11.6-62-ge5b2bf3/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i# node: cubie2 status: on ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.122 Filename '/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.multi-snowball'. Load address: 0x100000 Loading: *###node: snowball status: on ############################################################## ################################################################# ################################################################# ################################################################# ########################T ######################################### ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################### done Bytes transferred = 3614970 (3728fa hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3614906 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2718/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.multi-256m'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #############################################T #################### ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 588.9 KiB/s done Bytes transferred = 3598248 (36e7a8 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.11.6-62-ge5b2bf3/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2711/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.11.6-62-ge5b2bf3/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################# 3.6 MiB/s done Bytes transferred = 4304144 (41ad10 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.6-62-ge5b2bf3/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/queue/v3.11.6-62-ge5b2bf3/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off

11 years, 6 months

queue build: 10 warnings 0 failures (queue/v3.11.6-62-ge5b2bf3)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: e5b2bf3 wireless: cw1200: acquire hwbus lock around cw1200_irq_handler() call. Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.11.6-62-ge5b2bf3/ Runtime: 37m 36s Passed: 119 Failed: 0 Warnings: 10 Section mismatches: 8 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3228:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3593:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/mmc/host/tmio_mmc_pio.c:798:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/spi/spi-pl022.c:2197:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1134:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 4 drivers/usb/host/xhci.c:3574:17: warning: unused variable 'dev' [-Wunused-variable] 4 drivers/usb/host/xhci.c:3660:17: warning: unused variable 'dev' [-Wunused-variable] Section mismatches: 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5a7c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5aa4): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x4dc): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x504): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x0): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x28): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe43c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe464): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown)

11 years, 6 months

next boot: 1 passed 12 failed (next/next-20131031)

by Olof's autobooter

arndale : FAILED 1:11.48 bbb : OFFLINE 0:30.47 beaver : FAILED 0:18.01 multi-beaver : FAILED 1:05.07 cubie2 : FAILED 0:21.82 cubie : FAILED 0:18.57 cubox : OFFLINE 0:30.47 panda : FAILED 1:11.71 multi-panda : FAILED 0:48.60 sama5 : passed 1:40.89 snowball : FAILED 1:02.96 multi-snowball : FAILED 0:50.51 multi-trimslice : FAILED 0:46.27 wandboard : FAILED 0:55.67 multi-wandboard : FAILED 0:48.67 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board arndale failure log: ------------------------------------------------- Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############### done Bytes transferred = 2737800 (29c688 hex) ARNDALE5250 # tftpboot 0x407c0000 172.16.1.4:/srv/tftp/next/next-20131031/exynos5250-arndale.dtb tftpboot 0x407c0000 172.16.1.4:/srv/tftp/next/next-20131031/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.160 Filename '/srv/tftp/next/next-20131031/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *####### done Bytes transferred = 33005 (80ed hex) ARNDALE5250 # bootm 0x40800000 - 0x407c0000 bootm 0x40800000 - 0x407c0000 ## Booting kernel from Legacy Image at 40800000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2737736 Bytes = 2.6 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff4000, end 4ffff0ec ... OK Starting kernel ... node: arndale status: on ~$off ======================================================================== Board beaver failure log: ------------------------------------------------- [ 0.000000] pgd = c0004000 [ 0.000000] [00000000] *pgd=00000000 [ 0.000000] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0-rc7-next-20131031 #1 [ 0.000000] task: c07bdce0 ti: c07b2000 task.ti: c07b2000 [ 0.000000] PC is at _clk_register+0x1a0/0x208 [ 0.000000] LR is at 0x6b6c6368 [ 0.000000] pc : [<c03c4aec>] lr : [<6b6c6368>] psr: 600001d3 [ 0.000000] sp : c07b3eb8 ip : 0000001c fp : ee00f364 [ 0.000000] r10: fe206030 r9 : 0000002c r8 : ee013200 [ 0.000000] r7 : 00000000 r6 : ee014080 r5 : ee013200 r4 : 00000000 [ 0.000000] r3 : c07b3ee8 r2 : 80000000 r1 : c06f5a51 r0 : ee013240 [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c5387d Table: 8000404a DAC: 00000015 [ 0.000000] Process swapper/0 (pid: 0, stack limit = 0xc07b2240) [ 0.000000] Stack: (0xc07b3eb8 to 0xc07b4000) [ 0.000000] 3ea0: ee014080 ee013200 [ 0.000000] 3ec0: 00000000 00000000 c06f5a4c c03c4b8c ee013200 00000001 00000007 c03c5890 [ 0.000000] 3ee0: fe30e400 c06f5a40 c06f5a4c c05ca0c8 c07b3ee4 00000001 0000002c 00000000 [ 0.000000] 3f00: 00000000 c07a7ce0 fe206000 00000000 c084d1ec fe30e400 00000000 c078f3f8 [ 0.000000] 3f20: fe206030 00000007 00000001 c084d1ec c084d1ec c07e9370 c07b3f2c c084d210 [ 0.000000] 3f40: 00000000 c18628f4 c07f263c 00000004 00000001 c07f244c c084d1a0 c07906bc [ 0.000000] 3f60: 00000001 00000002 00000004 00000000 00000000 00000000 c07ac018 c18628f4 [ 0.000000] 3f80: c07ac018 c07b2000 c07a06d8 c07ba380 ffffffff c1868880 00000000 c078e61c [ 0.000000] 3fa0: c07ae2e0 c07ac264 c07ba380 c0803140 c07ba380 c07753c0 80000001 c07729a0 [ 0.000000] 3fc0: ffffffff ffffffff c0772578 00000000 00000000 c07a06d8 10c5387d c07ba3cc [ 0.000000] 3fe0: c07a06d4 c07bee10 8000406a 412fc099 00000000 80008074 00000000 00000000 [ 0.000000] [<c03c4aec>] (_clk_register+0x1a0/0x208) from [<c03c4b8c>] (clk_register+0x38/0x70) [ 0.000000] [<c03c4b8c>] (clk_register+0x38/0x70) from [<c03c5890>] (clk_register_gate+0xac/0x108) [ 0.000000] [<c03c5890>] (clk_register_gate+0xac/0x108) from [<c078f3f8>] (tegra_super_clk_gen4_init+0x1a4/0x2d0) [ 0.000000] [<c078f3f8>] (tegra_super_clk_gen4_init+0x1a4/0x2d0) from [<c07906bc>] (tegra30_clock_init+0x754/0xaf4) [ 0.000000] [<c07906bc>] (tegra30_clock_init+0x754/0xaf4) from [<c078e61c>] (of_clk_init+0x40/0x60) [ 0.000000] [<c078e61c>] (of_clk_init+0x40/0x60) from [<c07753c0>] (time_init+0x28/0x30) [ 0.000000] [<c07753c0>] (time_init+0x28/0x30) from [<c07729a0>] (start_kernel+0x1f8/0x340) [ 0.000000] [<c07729a0>] (start_kernel+0x1f8/0x340) from [<80008074>] (0x80008074) [ 0.000000] Code: e5886000 e5934014 e3540000 1affffb7 (e5970000) [ 0.000000] ---[ end trace 00ad2ff17d281ded ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Cubietech Cubieboard2 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] PERCPU: Embedded 5 pages/cpu @c0fb7000 s7040 r0 d13440 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1031640K/1048576K available (5030K kernel code, 612K rwdata, 1424K rodata, 478K init, 276K bss, 16936K reserved, 270336K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0xc0008000 - 0xc0655c4c (6456 kB) [ 0.000000] .init : 0xc0656000 - 0xc06cdb80 ( 479 kB) [ 0.000000] .data : 0xc06ce000 - 0xc0767240 ( 613 kB) [ 0.000000] .bss : 0xc0767248 - 0xc07ac344 ( 277 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at ../../include/linux/kref.h:47 __clk_get+0x58/0x64() [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0-rc7-next-20131031 #1 [ 0.000000] [<c0014e38>] (unwind_backtrace+0x0/0xf4) from [<c0011810>] (show_stack+0x10/0x14) [ 0.000000] [<c0011810>] (show_stack+0x10/0x14) from [<c04c0520>] (dump_stack+0x84/0x94) [ 0.000000] [<c04c0520>] (dump_stack+0x84/0x94) from [<c0041628>] (warn_slowpath_common+0x68/0x84) [ 0.000000] [<c0041628>] (warn_slowpath_common+0x68/0x84) from [<c004170c>] (warn_slowpath_null+0x1c/0x24) [ 0.000000] [<c004170c>] (warn_slowpath_null+0x1c/0x24) from [<c03caaf4>] (__clk_get+0x58/0x64) [ 0.000000] [<c03caaf4>] (__clk_get+0x58/0x64) from [<c03c8454>] (of_clk_get+0x5c/0x74) [ 0.000000] [<c03c8454>] (of_clk_get+0x5c/0x74) from [<c0691bc4>] (sun4i_timer_init+0x60/0x1f0) [ 0.000000] [<c0691bc4>] (sun4i_timer_init+0x60/0x1f0) from [<c0690fa8>] (clocksource_of_init+0x44/0x68) [ 0.000000] [<c0690fa8>] (clocksource_of_init+0x44/0x68) from [<c06569b4>] (start_kernel+0x20c/0x350) [ 0.000000] [<c06569b4>] (start_kernel+0x20c/0x350) from [<40008074>] (0x40008074) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Cubietech Cubieboard [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] PERCPU: Embedded 5 pages/cpu @c0fb7000 s7040 r0 d13440 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1031664K/1048576K available (5030K kernel code, 612K rwdata, 1424K rodata, 478K init, 276K bss, 16912K reserved, 270336K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0xc0008000 - 0xc0655c4c (6456 kB) [ 0.000000] .init : 0xc0656000 - 0xc06cdb80 ( 479 kB) [ 0.000000] .data : 0xc06ce000 - 0xc0767240 ( 613 kB) [ 0.000000] .bss : 0xc0767248 - 0xc07ac344 ( 277 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at ../../include/linux/kref.h:47 __clk_get+0x58/0x64() [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0-rc7-next-20131031 #1 [ 0.000000] [<c0014e38>] (unwind_backtrace+0x0/0xf4) from [<c0011810>] (show_stack+0x10/0x14) [ 0.000000] [<c0011810>] (show_stack+0x10/0x14) from [<c04c0520>] (dump_stack+0x84/0x94) [ 0.000000] [<c04c0520>] (dump_stack+0x84/0x94) from [<c0041628>] (warn_slowpath_common+0x68/0x84) [ 0.000000] [<c0041628>] (warn_slowpath_common+0x68/0x84) from [<c004170c>] (warn_slowpath_null+0x1c/0x24) [ 0.000000] [<c004170c>] (warn_slowpath_null+0x1c/0x24) from [<c03caaf4>] (__clk_get+0x58/0x64) [ 0.000000] [<c03caaf4>] (__clk_get+0x58/0x64) from [<c03c8454>] (of_clk_get+0x5c/0x74) [ 0.000000] [<c03c8454>] (of_clk_get+0x5c/0x74) from [<c0691bc4>] (sun4i_timer_init+0x60/0x1f0) [ 0.000000] [<c0691bc4>] (sun4i_timer_init+0x60/0x1f0) from [<c0690fa8>] (clocksource_of_init+0x44/0x68) [ 0.000000] [<c0690fa8>] (clocksource_of_init+0x44/0x68) from [<c06569b4>] (start_kernel+0x20c/0x350) [ 0.000000] [<c06569b4>] (start_kernel+0x20c/0x350) from [<40008074>] (0x40008074) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ 0.000000]~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 459 KiB/s done Bytes transferred = 3629512 (3761c8 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/next/next-20131031/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/next/next-20131031/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.175 Filename '/srv/tftp/next/next-20131031/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *##### 1.5 MiB/s done Bytes transferred = 20920 (51b8 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3629448 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff7000, end 8ffff1b7 ... OK Starting kernel ... node: beaver status: on ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################################### done Bytes transferred = 3629512 (3761c8 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/next/next-20131031/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/next/next-20131031/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/next/next-20131031/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 20188 (4edc hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3629448 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK Using Device Tree in place at 81000000, end 81007edb Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- Environment size: 1698/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/next/next-20131031/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/next/next-20131031/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.122 Filename '/srv/tftp/next/next-20131031/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #########T ######################################################## ################################################################# ################################################################# ################################################################# ################################################################# ############################################################### done Bytes transferred = 3649556 (37b014 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3649492 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################### done Bytes transferred = 3647348 (37a774 hex) TrimSlice # bootm 0x800000 bootm 0x800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3647284 Bytes = 3.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... U-Boot 2010.09-00172-g1c59bc2 (Mar 21 2011 - 10:25:36) TEGRA2 Board: TrimSlice DRAM: 1 GiB SF: Detected W25Q80BL with page size 256, total 1 MiB In: serial Out: serial Err: serial Boot: Spi Net: RTL8169#0 Hit any key to stop autoboot: 5 4 3 node: trimslice status: on 2 1 0 Unknown command 'none' - try 'help' TrimSlice # ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################T ############################### 596.7 KiB/s done Bytes transferred = 3629512 (3761c8 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/next/next-20131031/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/next/next-20131031/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/next/next-20131031/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: *####### 2.8 MiB/s done Bytes transferred = 35284 (89d4 hex) => bootm 0x12000000 - 0x14000000 bootm 0x12000000 - 0x14000000 ## Booting kernel from Legacy Image at 12000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3629448 Bytes = 3.5 MiB Load Address: 10008000 Entry Point: 10008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 14000000 Booting using the fdt blob at 0x14000000 Loading Kernel Image ... OK Using Device Tree in place at 14000000, end 1400b9d3 Starting kernel ... ~$off ======================================================================== Board panda failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################# done Bytes transferred = 4241408 (40b800 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/next/next-20131031/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/next/next-20131031/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/next/next-20131031/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 20188 (4edc hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4241344 Bytes = 4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK Using Device Tree in place at 81000000, end 81007edb Starting kernel ... node: panda-es status: on ~$off ======================================================================== Board snowball failure log: ------------------------------------------------- Environment size: 1692/4092 bytes U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/next/next-20131031/uImage.snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/next/next-20131031/uImage.snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.122 Filename '/srv/tftp/next/next-20131031/uImage.snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## done Bytes transferred = 2897156 (2c3504 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2897092 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... node: snowball status: on ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################################### 766.6 KiB/s done Bytes transferred = 4922848 (4b1de0 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/next/next-20131031/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/next/next-20131031/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/next/next-20131031/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: *####### 2.8 MiB/s done Bytes transferred = 35284 (89d4 hex) => bootm 0x12000000 - 0x14000000 bootm 0x12000000 - 0x14000000 ## Booting kernel from Legacy Image at 12000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4922784 Bytes = 4.7 MiB Load Address: 10008000 Entry Point: 10008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 14000000 Booting using the fdt blob at 0x14000000 Loading Kernel Image ... OK Using Device Tree in place at 14000000, end 1400b9d3 Starting kernel ... ~$off

11 years, 6 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports