Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

mainline build: 19 warnings 0 failures (mainline/v3.12-2839-gedae583)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: edae583 Merge tag 'arc-v3.13-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.12-2839-gedae583/ Runtime: 38m 30s Passed: 118 Failed: 0 Warnings: 19 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:965:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:965:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/video/exynos/exynos_mipi_dsi.c:144:26: warning: unused variable 'pdev' [-Wunused-variable] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 6 months

mainline boot: 30 pass, 0 fail (v3.12-2798-gf9efbce)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.12-2798-gf9efbce Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 32.8 sec omap3-beagle-xm PASS: 0 min 49.4 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 3.8 sec omap4-panda-es PASS: 1 min 1.4 sec omap3-tobi,3730storm PASS: 0 min 20.5 sec omap3-tobi,3530overo PASS: 0 min 24.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec imx6q-wandboard PASS: 0 min 16.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.3 sec tegra30-beaver PASS: 0 min 16.6 sec am335x-boneblack PASS: 0 min 34.7 sec omap3-beagle-xm PASS: 0 min 50.8 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 1.3 sec omap4-panda-es PASS: 1 min 2.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 19.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-tobi,3530overo PASS: 0 min 19.9 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 31.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 6 months

mainline boot: 15 passed 0 failed (mainline/v3.12-2798-gf9efbce)

by Olof's autobooter

arndale : passed 0:50.27 bbb : passed 1:54.19 beaver : passed 1:05.62 multi-beaver : passed 0:31.93 cubie2 : passed 0:56.86 cubie : passed 0:57.09 cubox : passed 0:52.41 panda : passed 2:49.19 multi-panda : passed 2:45.85 sama5 : passed 1:35.89 snowball : passed 1:03.38 multi-snowball : passed 0:37.85 multi-trimslice : passed 0:36.54 wandboard : passed 0:53.23 multi-wandboard : passed 0:30.74 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

11 years, 6 months

mainline build: 19 warnings 0 failures (mainline/v3.12-2798-gf9efbce)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: f9efbce Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.12-2798-gf9efbce/ Runtime: 38m 35s Passed: 118 Failed: 0 Warnings: 19 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:965:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:965:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/video/exynos/exynos_mipi_dsi.c:144:26: warning: unused variable 'pdev' [-Wunused-variable] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 6 months

next boot: 30 pass, 0 fail (next-20131111)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20131111 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.9 sec omap3-beagle-xm PASS: 0 min 53.9 sec am335x-bone PASS: 0 min 26.8 sec omap4-panda PASS: 1 min 5.7 sec omap4-panda-es PASS: 1 min 4.9 sec omap3-tobi,3730storm PASS: 0 min 24.0 sec omap3-tobi,3530overo PASS: 0 min 25.1 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec imx6q-wandboard PASS: 0 min 16.4 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.2 sec tegra30-beaver PASS: 0 min 21.3 sec am335x-boneblack PASS: 0 min 39.7 sec omap3-beagle-xm PASS: 0 min 49.0 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 0.8 sec omap4-panda-es PASS: 1 min 1.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec am335x-bone PASS: 0 min 33.5 sec imx6q-wandboard PASS: 0 min 16.8 sec omap3-tobi,3730storm PASS: 0 min 22.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.8 sec omap3-tobi,3530overo PASS: 0 min 20.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 28.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec

11 years, 6 months

next boot: 15 passed 0 failed (next/next-20131111)

by Olof's autobooter

arndale : passed 0:49.71 bbb : passed 1:57.70 beaver : passed 0:51.24 multi-beaver : passed 0:32.59 cubie2 : passed 0:55.56 cubie : passed 1:09.30 cubox : passed 0:48.38 panda : passed 2:50.64 multi-panda : passed 2:47.48 sama5 : passed 1:34.68 snowball : passed 0:58.12 multi-snowball : passed 0:38.19 multi-trimslice : passed 0:34.65 wandboard : passed 1:17.30 multi-wandboard : passed 0:35.10 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

11 years, 6 months

next build: 17 warnings 4 failures (next/next-20131111)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: edea089 Add linux-next specific files for 20131111 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20131111/ Runtime: 41m 34s Passed: 116 Failed: 4 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: at91x40_defconfig da8xx_omapl_defconfig davinci_all_defconfig efm32_defconfig ------------------------------------------------------------------------------- Errors: at91x40_defconfig: :(.init.text+0x79c): undefined reference to `early_paging_init' :(.text+0x15648): undefined reference to `vm_commit_limit' :(.text+0x4bbc8): undefined reference to `vm_commit_limit' da8xx_omapl_defconfig: ../../sound/soc/davinci/davinci-pcm.c:241:39: error: 'DMA_COMPLETE' undeclared (first use in this function) davinci_all_defconfig: ../../sound/soc/davinci/davinci-pcm.c:241:39: error: 'DMA_COMPLETE' undeclared (first use in this function) efm32_defconfig: arch/arm/kernel/sigreturn_codes.S:48: Error: selected processor does not support ARM opcodes arch/arm/kernel/sigreturn_codes.S:53: Error: attempt to use an ARM instruction on a Thumb-only processor -- `mov r7,#((0+119)-0)' arch/arm/kernel/sigreturn_codes.S:54: Error: attempt to use an ARM instruction on a Thumb-only processor -- `swi #((0+119))|(0x900000)' arch/arm/kernel/sigreturn_codes.S:62: Error: selected processor does not support ARM opcodes arch/arm/kernel/sigreturn_codes.S:63: Error: attempt to use an ARM instruction on a Thumb-only processor -- `mov r7,#((0+173)-0)' arch/arm/kernel/sigreturn_codes.S:64: Error: attempt to use an ARM instruction on a Thumb-only processor -- `swi #((0+173))|(0x900000)' arch/arm/kernel/sigreturn_codes.S:77: Error: selected processor does not support ARM opcodes arch/arm/lib/changebit.S:15: Error: architectural extension `mp' is not allowed for the current base architecture arch/arm/lib/clearbit.S:15: Error: architectural extension `mp' is not allowed for the current base architecture arch/arm/lib/setbit.S:15: Error: architectural extension `mp' is not allowed for the current base architecture Warnings: 1 arch/arm/kernel/traps.c:859:123: warning: 'kuser_init' defined but not used [-Wunused-function] 1 arch/arm/mach-omap2/pm34xx.c:123:32: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/video/exynos/exynos_mipi_dsi.c:144:26: warning: unused variable 'pdev' [-Wunused-variable] 2 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 2 drivers/gpu/host1x/hw/debug_hw.c:167:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

11 years, 6 months

arm-soc boot: 15 passed 0 failed (arm-soc/v3.12-2754-g275a74d)

by Olof's autobooter

arndale : passed 0:50.09 bbb : passed 1:53.05 beaver : passed 1:02.29 multi-beaver : passed 0:36.05 cubie : passed 1:03.74 cubie2 : passed 0:55.38 cubox : passed 0:53.52 panda : passed 2:59.45 multi-panda : passed 2:50.22 sama5 : passed 1:28.92 snowball : passed 0:55.32 multi-snowball : passed 0:37.51 multi-trimslice : passed 0:45.41 wandboard : passed 1:08.31 multi-wandboard : passed 0:40.10 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

11 years, 6 months

arm-soc build: 19 warnings 0 failures (arm-soc/v3.12-2754-g275a74d)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 275a74d Merge branch 'next/dt' into HEAD Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.12-2754-g275a74d/ Runtime: 38m 13s Passed: 118 Failed: 0 Warnings: 19 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:965:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:965:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/video/exynos/exynos_mipi_dsi.c:144:26: warning: unused variable 'pdev' [-Wunused-variable] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 6 months

arm-soc boot: 0 passed 13 failed (arm-soc/v3.12-2754-g3eb5b6a)

by Olof's autobooter

arndale : FAILED 0:51.51 bbb : FAILED 1:14.92 beaver : FAILED 0:46.62 multi-beaver : FAILED 0:46.08 cubie : FAILED 0:49.78 cubie2 : FAILED 0:59.41 cubox : OFFLINE 0:30.46 panda : OFFLINE 0:30.49 multi-panda : FAILED 0:44.94 sama5 : FAILED 1:01.78 snowball : FAILED 1:00.05 multi-snowball : FAILED 0:39.69 multi-trimslice : FAILED 1:00.83 wandboard : FAILED 1:00.71 multi-wandboard : FAILED 0:39.53 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board arndale failure log: ------------------------------------------------- setenv autoboot no ARNDALE5250 # printenv printenv autoboot=no autoload=no baudrate=115200 bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw bootcmd=run net_boot bootdelay=3 bootfile=arm-soc/v3.12-2754-g3eb5b6a/uImage.exynos dnsip=172.16.1.1 ethact=asx0 gatewayip=172.16.1.1 initrd_high=0x7fffffff ipaddr=172.16.1.155 legacy=usb start ; bootp ; tftpboot 0x40800000 172.16.1.7:/srv/tftp/uImage.arndale && bootm 0x40800000 net_boot=bootp ; tftpboot 0x40800000 172.16.1.4:/srv/tftp/uImage.exynos && tftpboot 0x407c0000 172.16.1.4:/srv/tftp/exynos5250-arndale.dtb && bootm 0x40800000 - 0x407c0000 netmask=255.255.255.0 preboot=usb start serverip=172.16.1.7 stderr=serial stdin=serial stdout=serial usbethaddr=00:40:5c:26:0a:5b Environment size: 749/16380 bytes ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw ARNDALE5250 # tftpboot 0x40800000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.exynos tftpboot 0x40800000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.exynos Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.155 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.exynos'. Load address: 0x40800000 Loading: * TFTP error: 'File not found' (1) Not retrying... ARNDALE5250 # ~$off ======================================================================== Board bbb failure log: ------------------------------------------------- ramargs=setenv bootargs console=${console} ${optargs} root=${ramroot} rootfstype=${ramrootfstype} ramboot=echo Booting from ramdisk ...; run ramargs; bootm ${loadaddr} ${rdaddr} ${fdtaddr} ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M ramrootfstype=ext2 rdaddr=0x81000000 rootpath=/export/rootfs serverip=172.16.1.7 soc=am33xx spiargs=setenv bootargs console=${console} ${optargs} root=${spiroot} rootfstype=${spirootfstype} spiboot=echo Booting from spi ...; run spiargs; sf probe ${spibusno}:0; sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; bootm ${loadaddr} spibusno=0 spiimgsize=0x362000 spiroot=/dev/mtdblock4 rw spirootfstype=jffs2 spisrcaddr=0xe0000 static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off stderr=serial stdin=serial stdout=serial usbnet_devaddr=bc:6a:29:7a:42:a8 vendor=ti ver=U-Boot 2013.04-00017-g5c4fa11 (May 03 2013 - 10:48:32) Environment size: 4204/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.103 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.omap'. Load address: 0x80000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board beaver failure log: ------------------------------------------------- dnsip=172.16.1.1 ethact=asx0 fdt_addr_r=0x82000000 gatewayip=172.16.1.1 initrd_high=0xffffffff ipaddr=172.16.1.171 kernel_addr_r=0x81000000 loadaddr=0x80408000 mmc_boot=setenv devtype mmc; if mmc dev ${devnum}; then run scan_boot; fi netmask=255.255.255.0 ramdisk_addr_r=0x82100000 rootpart=1 scan_boot=echo Scanning ${devtype} ${devnum}...; for prefix in ${boot_prefixes}; do for script in ${boot_scripts}; do run script_boot; done; done; script_boot=if load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then echo ${script} found! Executing ...;source ${scriptaddr};fi; scriptaddr=0x90000000 serverip=172.16.1.7 soc=tegra30 stderr=serial stdin=serial stdout=serial usb_boot=setenv devtype usb; run usb_init; if usb dev ${devnum}; then run scan_boot; fi usb_init=if ${usb_need_init}; then set usb_need_init false; usb start 0; fi usbethaddr=58:6d:8f:50:ba:18 vendor=nvidia Environment size: 1600/8188 bytes Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # tftpboot 0x82000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.tegra30 tftpboot 0x82000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.tegra30 Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.171 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.tegra30'. Load address: 0x82000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Tegra30 (Beaver) # node: beaver status: on ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- bootenv=uEnv.txt bootfile=arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-1g bootscr=boot.scr console=ttyS0,115200 device=mmc dnsip=172.16.1.1 ethact=emac ethaddr=08:00:08:1e:2f:44 gatewayip=172.16.1.1 ipaddr=172.16.1.133 kernel=uImage loadbootenv=fatload $device $partition $scriptaddr ${bootenv} || ext2load $device $partition $scriptaddr boot/${bootenv} || ext2load $device $partition $scriptaddr ${bootenv} loadbootscr=fatload $device $partition $scriptaddr ${bootscr} || ext2load $device $partition $scriptaddr boot/${bootscr} ||ext2load $device $partition $scriptaddr ${bootscr} loadkernel=if bootpath=/boot/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; elif bootpath=/ && fatload $device $partition 0x43000000 script.bin && fatload $device $partition 0x48000000 ${kernel};then true; elif bootpath=/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; else false;fi loglevel=8 netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2099/131068 bytes sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.133 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-1g'. Load address: 0x41000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun4i#node: cubie status: on ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- bootenv=uEnv.txt bootfile=arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-1g bootscr=boot.scr console=ttyS0,115200 device=mmc dnsip=172.16.1.1 ethact=emac ethaddr=08:00:08:1e:2f:64 gatewayip=172.16.1.1 ipaddr=172.16.1.149 kernel=uImage loadbootenv=fatload $device $partition $scriptaddr ${bootenv} || ext2load $device $partition $scriptaddr boot/${bootenv} || ext2load $device $partition $scriptaddr ${bootenv} loadbootscr=fatload $device $partition $scriptaddr ${bootscr} || ext2load $device $partition $scriptaddr boot/${bootscr} ||ext2load $device $partition $scriptaddr ${bootscr} loadkernel=if bootpath=/boot/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; elif bootpath=/ && fatload $device $partition 0x43000000 script.bin && fatload $device $partition 0x48000000 ${kernel};then true; elif bootpath=/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; else false;fi loglevel=8 netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2100/131068 bytes sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# tftpboot 0x41000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.149 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-1g'. Load address: 0x41000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i# node: cubie2 status: on ~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- cpu=armv7 dnsip=172.16.1.1 ethact=asx0 fdt_addr_r=0x82000000 gatewayip=172.16.1.1 initrd_high=0xffffffff ipaddr=172.16.1.171 kernel_addr_r=0x81000000 loadaddr=0x80408000 mmc_boot=setenv devtype mmc; if mmc dev ${devnum}; then run scan_boot; fi netmask=255.255.255.0 ramdisk_addr_r=0x82100000 rootpart=1 scan_boot=echo Scanning ${devtype} ${devnum}...; for prefix in ${boot_prefixes}; do for script in ${boot_scripts}; do run script_boot; done; done; script_boot=if load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then echo ${script} found! Executing ...;source ${scriptaddr};fi; scriptaddr=0x90000000 serverip=172.16.1.7 soc=tegra30 stderr=serial stdin=serial stdout=serial usb_boot=setenv devtype usb; run usb_init; if usb dev ${devnum}; then run scan_boot; fi usb_init=if ${usb_need_init}; then set usb_need_init false; usb start 0; fi usbethaddr=58:6d:8f:50:ba:18 vendor=nvidia Environment size: 1601/8188 bytes Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # tftpboot 0x82000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-2g tftpboot 0x82000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-2g Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.171 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-2g'. Load address: 0x82000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Tegra30 (Beaver) # ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- setenv autoboot no Panda # printenv printenv autoboot=no autoload=no baudrate=115200 bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk bootcmd=run usb_boot ; run legacy ; run local bootdelay=1 bootfile=arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-2g console=ttyO2,115200n8 ethact=sms0 fdt_high=0xffffffff gatewayip=172.16.1.1 hostname=panda-es ipaddr=172.16.1.182 legacy=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && bootm 0x80000000 loadaddr=0x80000000 local=mmc rescan 0 ; fatload mmc 0:1 0x80000000 uImage && bootm 0x80000000 netmask=255.255.255.0 serverip=172.16.1.7 usb_boot=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && tftp 0x81000000 172.16.1.7:/srv/tftp/omap4-panda.dtb && bootm 0x80000000 - 0x81000000 usbethaddr=2E:60:67:E0:49:01 Environment size: 822/131068 bytes Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # tftpboot 0x80000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-2g tftpboot 0x80000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-2g Waiting for Ethernet connection... node: panda-es status: on done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-2g'. Load address: 0x80000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Panda # ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- emmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk0p3 rootwait addcons=setenv bootargs ${bootargs} console=${console} emmcboot=echo Booting from eMMC ...; run commonargs emmcargs memargs; bootm ${loadaddr} mmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk1p2 rootwait mmcboot=echo Booting from external MMC ...; run commonargs mmcargs memargs; bootm ${loadaddr} ethact=smc911x-0 bootdelay=5 bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk ethaddr=08:00:08:1e:0f:44 stdin=serial stdout=serial stderr=serial board_id=1 startup_graphics=0 logo=0 crashkernel=crashkernel=1M@0x5600000 autoload=no netmask=255.255.255.0 ipaddr=172.16.1.117 serverip=172.16.1.7 bootfile=arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-snowball autoboot=no Environment size: 1707/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.117 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-snowball'. Load address: 0x100000 Loading: * TFTP error: 'File not found' (1) Not retrying... U8500 $ ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.130 TrimSlice # setenv bootfile arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-trimslice setenv bootfile arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.130 serverip=172.16.1.7 bootfile=arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-trimslice autoboot=no Environment size: 377/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.130 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # node: trimslice status: on ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- gatewayip=172.16.1.1 importbootenv=echo Importing environment from mmc (uEnv.txt)...; env import -t $loadaddr $filesize initrd_high=0xffffffff ip_dyn=yes ipaddr=172.16.1.150 loadaddr=0x12000000 loadbootenv=load mmc ${mmcdev}:${mmcpart} ${loadaddr} uEnv.txt loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script}; loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /dtbs/${fdt_file} loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage} loadzimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage mmcargs=setenv bootargs console=${console},${baudrate} ${optargs} root=${mmcroot} rootfstype=${mmcrootfstype} video=${video} mmcboot=echo Booting from mmc ...; run mmcargs; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; mmcdev=0 mmcpart=1 mmcroot=/dev/mmcblk0p2 ro mmcrootfstype=ext4 rootwait netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; netmask=255.255.255.0 script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2720/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.multi-256m'. Load address: 0x12000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off ======================================================================== Board sama5 failure log: ------------------------------------------------- U-Boot> setenv autoboot no setenv autoboot no U-Boot> printenv printenv autoboot=no autoload=no baudrate=115200 bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw debug bootcmd=nand read 0x21000000 0x00180000 0x0000509E; nand read 0x22000000 0x00200000 0x00281428; bootm 0x22000000 - 0x21000000 bootdelay=6 bootfile=arm-soc/v3.12-2754-g3eb5b6a/uImage.sama5 eth1addr=08:00:08:e1:88:0e ethact=gmacb0 ethprime=gmacb0 ipaddr=172.16.1.199 legacy_bootargs=console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs serverip=172.16.1.4 stderr=serial stdin=serial stdout=serial Environment size: 610/131067 bytes U-Boot> setenv bootargs 'console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw' setenv bootargs 'console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw' U-Boot> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw U-Boot> tftpboot 0x22000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.sama5 tftpboot 0x22000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.sama5 gmacb0: PHY present at 1 gmacb0: link up, 1000Mbps full-duplex (lpa: 0x0300) Using gmacb0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.199 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.sama5'. Load address: 0x22000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot> node: sama5 status: on ~$off ======================================================================== Board snowball failure log: ------------------------------------------------- addcons=setenv bootargs ${bootargs} console=${console} emmcboot=echo Booting from eMMC ...; run commonargs emmcargs memargs; bootm ${loadaddr} mmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk1p2 rootwait mmcboot=echo Booting from external MMC ...; run commonargs mmcargs memargs; bootm ${loadaddr} ethact=smc911x-0 bootdelay=5 bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk ethaddr=08:00:08:1e:0f:44 stdin=serial stdout=serial stderr=serial board_id=1 startup_graphics=0 logo=0 crashkernel=crashkernel=1M@0x5600000 autoload=no netmask=255.255.255.0 ipaddr=172.16.1.117 serverip=172.16.1.7 bootfile=arm-soc/v3.12-2754-g3eb5b6a/uImage.snowball autoboot=no Environment size: 1701/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.117 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.snowball'. Load address: 0x100000 Loading: * TFTP error: 'File not found' (1) Not retrying... U8500 $ node: snowball status: on ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- importbootenv=echo Importing environment from mmc (uEnv.txt)...; env import -t $loadaddr $filesize initrd_high=0xffffffff ip_dyn=yes ipaddr=172.16.1.150 loadaddr=0x12000000 loadbootenv=load mmc ${mmcdev}:${mmcpart} ${loadaddr} uEnv.txt loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script}; loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /dtbs/${fdt_file} loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage} loadzimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage mmcargs=setenv bootargs console=${console},${baudrate} ${optargs} root=${mmcroot} rootfstype=${mmcrootfstype} video=${video} mmcboot=echo Booting from mmc ...; run mmcargs; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; mmcdev=0 mmcpart=1 mmcroot=/dev/mmcblk0p2 ro mmcrootfstype=ext4 rootwait netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; netmask=255.255.255.0 script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2713/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.150 Filename '/srv/tftp/arm-soc/v3.12-2754-g3eb5b6a/uImage.imx'. Load address: 0x12000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => node: wandboard status: on ~$off

11 years, 6 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports