Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

arm-soc build: 16 warnings 0 failures (arm-soc/v3.13-rc1-58-gd40b279)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: d40b279 Merge branch 'fixes' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-rc1-58-gd40b279/ Runtime: 35m 14s Passed: 119 Failed: 0 Warnings: 16 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/dma/at_hdmac_regs.h:350:23: warning: 'chan2parent' defined but not used [-Wunused-function] 2 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 2 drivers/gpu/host1x/hw/debug_hw.c:167:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] 4 drivers/dma/mv_xor.c:57:12: warning: 'mv_desc_get_dest_addr' defined but not used [-Wunused-function] Section mismatches:

11 years, 5 months

queue boot: 12 pass, 2 fail (v3.10.21-60-gb323ae3)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.21-60-gb323ae3 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 51.1 sec am335x-bone PASS: 0 min 26.3 sec omap4-panda PASS: 1 min 12.2 sec omap4-panda-es PASS: 1 min 6.7 sec omap3-tobi,3730storm PASS: 0 min 35.8 sec omap3-tobi,3530overo PASS: 0 min 33.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 20.7 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.5 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox FAIL: 0 min 17.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c0275980>] (panic+0xa0/0x1e8) [<c0275980>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02716d8>] (kernel_init+0x8/0x158) [<c02716d8>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.21-00060-gb323ae3 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c001234c>] (handle_IPI+0x108/0x130) [<c001234c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0359f70 to 0xc0359fb8) 9f60: c1d5a6d8 00000000 000000c2 000000c2 9f80: c03604a8 c0358000 c036045c c0383a6c c027debc c0358000 c0383a6c c0358000 9fa0: 0000001f c0359fb8 c000f070 c004f8e0 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) [<c004f8e0>] (cpu_startup_entry+0xfc/0x140) from [<c0328a3c>] (start_kernel+0x2c4/0x2d0) [<c0328a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 20.06 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.21-00060-gb323ae3 #1 [<c0013bcc>] (unwind_backtrace+0x0/0xf4) from [<c0011490>] (show_stack+0x10/0x14) [<c0011490>] (show_stack+0x10/0x14) from [<c0275980>] (panic+0xa0/0x1e8) [<c0275980>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c02716d8>] (kernel_init+0x8/0x158) [<c02716d8>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 17.83 seconds. # PYBOOT: Result: FAIL

11 years, 5 months

queue build: 23 warnings 0 failures (queue/v3.10.21-60-gb323ae3)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: b323ae3 xen/blkback: fix reference counting Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.10.21-60-gb323ae3/ Runtime: 32m 13s Passed: 121 Failed: 0 Warnings: 23 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-pxa/em-x270.c:480:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:484:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:603:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/gpio/gpio-omap.c:1529:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] 1 drivers/spi/spi-pl022.c:2226:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/video/backlight/max8925_bl.c:124:41: warning: statement with no effect [-Wunused-value] 1 include/linux/clocksource.h:345:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] Section mismatches:

11 years, 5 months

queue boot: 30 pass, 0 fail (v3.12.2-75-ge102068)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.2-75-ge102068 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.4 sec omap3-beagle-xm PASS: 0 min 50.1 sec am335x-bone PASS: 0 min 26.1 sec omap4-panda PASS: 1 min 4.2 sec omap4-panda-es PASS: 1 min 7.4 sec omap3-tobi,3730storm PASS: 0 min 21.0 sec omap3-tobi,3530overo PASS: 0 min 21.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.8 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 19.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.2 sec tegra30-beaver PASS: 0 min 16.7 sec am335x-boneblack PASS: 0 min 34.5 sec omap3-beagle-xm PASS: 0 min 52.7 sec sun7i-a20-cubieboard2 PASS: 0 min 12.9 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 2.5 sec omap4-panda-es PASS: 1 min 3.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.8 sec omap3-tobi,3730storm PASS: 0 min 19.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 22.8 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 5 months

queue build: 17 warnings 0 failures (queue/v3.12.2-75-ge102068)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: e102068 xen/blkback: fix reference counting Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.2-75-ge102068/ Runtime: 33m 59s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 5 months

mainline boot: 30 pass, 0 fail (v3.13-rc2-1-gaf91706)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-rc2-1-gaf91706 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.9 sec omap3-beagle-xm PASS: 0 min 52.8 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 3.6 sec omap4-panda-es PASS: 1 min 1.9 sec omap3-tobi,3730storm PASS: 0 min 24.1 sec omap3-tobi,3530overo PASS: 0 min 21.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.8 sec imx6q-wandboard PASS: 0 min 16.7 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 20.0 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.6 sec tegra30-beaver PASS: 0 min 20.3 sec am335x-boneblack PASS: 0 min 34.7 sec omap3-beagle-xm PASS: 0 min 50.5 sec sun7i-a20-cubieboard2 PASS: 0 min 12.9 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 1.7 sec omap4-panda-es PASS: 1 min 0.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.6 sec am335x-bone PASS: 0 min 33.5 sec imx6q-wandboard PASS: 0 min 16.8 sec omap3-tobi,3730storm PASS: 0 min 22.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec omap3-tobi,3530overo PASS: 0 min 20.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 28.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 5 months

mainline boot: 15 passed 0 failed (mainline/v3.13-rc2-1-gaf91706)

by Olof's autobooter

arndale : passed 0:46.72 bbb : passed 1:43.07 beaver : passed 0:38.48 multi-beaver : passed 0:28.59 cubie : passed 0:44.20 cubie2 : passed 0:44.95 cubox : passed 0:49.43 panda : passed 2:49.44 multi-panda : passed 2:44.42 sama5 : passed 1:34.90 snowball : passed 0:46.56 multi-snowball : passed 0:37.82 multi-trimslice : passed 0:38.69 wandboard : passed 0:53.23 multi-wandboard : passed 0:31.22 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

11 years, 5 months

mainline build: 20 warnings 0 failures (mainline/v3.13-rc2-1-gaf91706)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: af91706 ima: store address of template_fmt_copy in a pointer before calling strsep Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-rc2-1-gaf91706/ Runtime: 35m 18s Passed: 119 Failed: 0 Warnings: 20 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/dma/at_hdmac_regs.h:350:23: warning: 'chan2parent' defined but not used [-Wunused-function] 2 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 2 drivers/gpu/host1x/hw/debug_hw.c:167:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] 4 drivers/dma/amba-pl08x.c:1172:2: warning: passing argument 1 of 'dma_descriptor_unmap' from incompatible pointer type [enabled by default] 4 drivers/dma/mv_xor.c:57:12: warning: 'mv_desc_get_dest_addr' defined but not used [-Wunused-function] Section mismatches:

11 years, 5 months

rmk boot: 8 passed 4 failed (rmk/v3.13-rc2-21-gfb4bdc5)

by Olof's autobooter

arndale : OFFLINE 0:30.49 bbb : passed 1:44.86 beaver : passed 0:41.63 multi-beaver : passed 0:31.83 cubie : passed 0:45.55 cubie2 : passed 0:51.07 cubox : OFFLINE 0:30.47 panda : FAILED 0:59.35 multi-panda : FAILED 2:57.10 sama5 : OFFLINE 0:30.47 snowball : passed 1:09.05 multi-snowball : FAILED 2:15.42 multi-trimslice : passed 0:39.87 wandboard : FAILED 1:43.54 multi-wandboard : passed 0:37.92 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board multi-panda failure log: ------------------------------------------------- [ 1.566680] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 1.573089] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 1.579376] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.587127] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.596588] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 1.651794] twl_rtc rtc.11: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 1.661010] Waiting for root device /dev/mmcblk0p2... [ 1.699798] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.826477] mmc0: host does not support reading read-only switch. assuming write-enable. [ 1.836914] mmc0: new high speed SDHC card at address b368 [ 1.843139] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.849304] mmcblk0: p1 p2 [ 1.875549] hub 1-1:1.0: USB hub found [ 1.879669] hub 1-1:1.0: 5 ports detected [ 1.916656] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.926269] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.937988] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 1.945953] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 2.193939] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 5.402435] EXT4-fs (mmcblk0p2): recovery complete [ 5.877624] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.886230] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 5.902252] devtmpfs: mounted [ 5.905914] Freeing unused kernel memory: 468K (c0649000 - c06be000) [ 6.120666] init: Failed to create pty - disabling logging for job [ 6.128814] init: Temporary process spawn error: No space left on device [ 6.177032] init: Failed to create pty - disabling logging for job [ 6.184082] init: Temporary process spawn error: No space left on device [ 6.200958] init: Failed to create pty - disabling logging for job [ 6.200958] init: Temporary process spawn error: No space left on device [ 6.217529] init: Failed to create pty - disabling logging for job [ 6.224090] init: Temporary process spawn error: No space left on device [ 6.326934] init: ureadahead main process (59) terminated with status 5 [ 6.453002] init: Failed to create pty - disabling logging for job [ 6.453002] init: Temporary process spawn error: No space left on device [ 6.480651] init: Failed to create pty - disabling logging for job [ 6.481781] init: Temporary process spawn error: No space left on device [ 6.539276] init: Failed to create pty - disabling logging for job [ 6.546264] init: Temporary process spawn error: No space left on device ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- [ 18.312652] NET: Registered protocol family 35 [ 18.317565] NET: Registered protocol family 37 [ 18.322235] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 18.330383] Registering SWP/SWPB emulation handler [ 18.343139] l2x0-prefetch: initialized. [ 18.350433] mcde_display_hdmi_init [ 18.355041] regulator_init_complete: LDO-USB: disabling [ 18.360443] regulator_init_complete: db8500-esram34: disabling [ 18.366394] regulator_init_complete: db8500-esram12: disabling [ 18.391021] ab8500-rtc ab8500-rtc.0: setting system clock to 2013-11-30 23:19:37 UTC (1385853577) [ 18.921295] net eth0: SMSC911x/921x identified at 0xe08c0000, IRQ: 300 [ 19.732818] av8100_hdmi av8100_hdmi.1: HDMI display probed [ 19.831665] av8100 0-0070: chip version:2 [ 19.931579] Sending DHCP requests .Console: switching to colour frame buffer device 160x45 [ 20.921325] av8100_hdmi av8100_hdmi.1: Framebuffer created (av8100_hdmi) [ 22.511474] .node: snowball status: on ., OK [ 30.091461] IP-Config: Got DHCP answer from 172.16.1.7, my address is 172.16.1.153 [ 30.101135] IP-Config: Complete: [ 30.104614] device=eth0, addr=172.16.1.153, mask=255.255.255.0, gw=172.16.1.1, [ 30.112213] host=172.16.1.153, domain=lixom.net, nis-domain=(none), [ 30.118957] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 30.128173] EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240) [ 30.232574] EXT2-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (244) [ 30.723449] EXT4-fs (mmcblk0p3): warning: checktime reached, running e2fsck is recommended [ 30.735778] EXT4-fs (mmcblk0p3): recovery complete [ 30.743927] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 30.752197] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 30.759704] devtmpfs: mounted [ 30.762969] Freeing init memory: 216K Last login: Wed Sep 11 20:13:55 UTC 2013 on tty1 root Welcome to Linaro 11.09 (development branch) (GNU/Linux 2.6.38-1001-ux500 armv7l) * Documentation: https://wiki.linaro.org/ root root@linaro-nano:~# root -bash: root: command not found root@linaro-nano:~# ~$off ======================================================================== Board panda failure log: ------------------------------------------------- [ 2.258880] of_get_named_gpio_flags: can't parse gpios property [ 2.265197] of_get_named_gpio_flags: can't parse gpios property [ 2.271606] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.279418] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.290313] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.337280] twl_rtc rtc.10: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.346191] Waiting for root device /dev/mmcblk0p2... [ 2.491119] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.501739] mmc0: new high speed SDHC card at address b368 [ 2.509307] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.517517] mmcblk0: p1 p2 [ 2.575775] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) [ 2.587280] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244) [ 2.601501] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.609313] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 5.661743] EXT4-fs (mmcblk0p2): recovery complete [ 6.134796] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.134918] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 6.155609] devtmpfs: mounted [ 6.155609] Freeing unused kernel memory: 376K (c06f2000 - c0750000) [ 6.420074] init: Failed to create pty - disabling logging for job [ 6.429504] init: Temporary process spawn error: No space left on device [ 6.484832] init: Failed to create pty - disabling logging for job [ 6.491729] init: Temporary process spawn error: No space left on device [ 6.513854] init: Failed to create pty - disabling logging for job [ 6.520538] init: Temporary process spawn error: No space left on device [ 6.530761] init: Failed to create pty - disabling logging for job [ 6.538604] init: Temporary process spawn error: No space left on device [ 6.645996] init: ureadahead main process (785) terminated with status 5 [ 6.798400] init: Failed to create pty - disabling logging for job [ 6.805206] init: Temporary process spawn error: No space left on device [ 6.835723] init: Failed to create pty - disabling logging for job [ 6.835723] init: Temporary process spawn error: No space left on device [ 6.924621] init: Failed to create pty - disabling logging for job [ 6.924621] init: Temporary process spawn error: No space left on device modprobe: FATAL: Could not load /lib/modules/3.11.0-rc1-00018-g16fc5bc/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/3.11.0-rc1-00018-g16fc5bc/modules.dep: No such file or directory ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@wandboard:~# halt halt Broadcast message from root@wandboard (ttymxc0) (Thu Jan 1 00:00:22 1970): The system is going down for system halt NOW! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signanode wandboard status: off U-Boot 2013.07-dirty (Aug 04 2013 - 23:26:03) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 1 0 mmc0 is current device SD/MMC found on device 0 ** File not found uEnv.txt ** Checking if uenvcmd is set ... Running default loadzimage ... ** File not found zImage ** => node: wandboard status: on node: wandboard status: on ~$off

11 years, 5 months

rmk boot: 15 passed 0 failed (rmk/v3.13-rc1-14-g021af24)

by Olof's autobooter

arndale : passed 0:51.55 bbb : passed 1:55.92 beaver : passed 0:57.82 multi-beaver : passed 0:28.85 cubie : passed 0:56.65 cubie2 : passed 0:56.52 cubox : passed 0:50.77 panda : passed 2:52.77 multi-panda : passed 2:45.69 sama5 : passed 1:38.89 snowball : passed 0:54.90 multi-snowball : passed 0:37.88 multi-trimslice : passed 0:33.27 wandboard : passed 0:58.76 multi-wandboard : passed 0:34.71 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

11 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports