Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

next boot: 32 pass, 2 fail (next-20140116)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140116 Failed boot tests (console logs at the end) =========================================== exynos5250-arndale: FAIL: exynos_defconfig omap4-panda-es: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.2 sec omap3-beagle-xm PASS: 0 min 58.2 sec am335x-bone PASS: 0 min 26.8 sec omap4-panda PASS: 1 min 5.8 sec omap4-panda-es PASS: 1 min 4.9 sec omap3-tobi,3730storm PASS: 0 min 23.8 sec omap3-tobi,3530overo PASS: 0 min 25.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.0 sec imx6q-wandboard PASS: 0 min 15.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.3 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.6 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 1 min 25.2 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.1 sec tegra30-beaver PASS: 0 min 21.1 sec am335x-boneblack PASS: 0 min 22.8 sec omap3-beagle-xm PASS: 0 min 50.4 sec sun7i-a20-cubieboard2 PASS: 0 min 13.7 sec armada-370-mirabox PASS: 0 min 21.5 sec omap4-panda PASS: 0 min 51.0 sec omap4-panda-es FAIL: 1 min 45.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.7 sec bcm28155-ap PASS: 1 min 9.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone PASS: 0 min 25.4 sec imx6q-wandboard PASS: 0 min 16.7 sec omap3-tobi,3730storm PASS: 0 min 23.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.6 sec omap3-tobi,3530overo PASS: 0 min 20.8 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.2 sec Console logs for failures ========================= exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- [ 1.870085] VDD_33ON_2.8V: disabling [ 1.881063] exynos-dp 145b0000.dp-controller: unable to find phy [ 1.886960] platform 145b0000.dp-controller: Driver exynos-dp requests probe deferral [ 1.887265] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 1.887351] mmc0: new high speed DDR MMC card at address 0001 [ 1.910581] isa bounce pool size: 16 pages [ 1.914429] mmcblk0: mmc0:0001 M4G1FA 3.72 GiB [ 1.919026] mmcblk0boot0: mmc0:0001 M4G1FA partition 1 1.00 MiB [ 1.924932] mmcblk0boot1: mmc0:0001 M4G1FA partition 2 1.00 MiB [ 1.930827] mmcblk0rpmb: mmc0:0001 M4G1FA partition 3 128 KiB [ 1.937537] mmcblk0: p1 p2 p3 p4 [ 1.942002] mmcblk0boot1: unknown partition table [ 1.946261] mmcblk0boot0: unknown partition table [ 2.111039] exynos-dp 145b0000.dp-controller: unable to find phy [ 2.115608] platform 145b0000.dp-controller: Driver exynos-dp requests probe deferral [ 2.124339] input: gpio_keys.4 as /devices/gpio_keys.4/input/input0 [ 2.130055] exynos-dp 145b0000.dp-controller: unable to find phy [ 2.135687] s3c-rtc 101e0000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.144169] platform 145b0000.dp-controller: Driver exynos-dp requests probe deferral [ 2.153030] Waiting for root device /dev/mmcblk1p3... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 85.16 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ scanning usb for ethernet devices... 1 Ethernet Device(s) found Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.163 Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'omap2/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################### 2.2 MiB/s done Bytes transferred = 4112320 (3ebfc0 hex) Wrong Image Format for bootm command ERROR: can't get kernel image! ** File not found /boot/omap2/zImage ** Panda # ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 105.08 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

next boot: 25 passed 2 failed (next/next-20140117)

by Olof's autobooter

Failed boards: beaver tegra_defconfig : BUILD FAILED dalmore tegra_defconfig : BUILD FAILED hummingboard multi_v7_defconfig : FAILED 0:25.53 panda multi_v7_defconfig : FAILED 1:31.96 seaboard tegra_defconfig : BUILD FAILED trimslice tegra_defconfig : BUILD FAILED Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.95 arndale exynos_defconfig : passed 1:06.81 bbb omap2plus_defconfig : passed 1:35.84 bbb multi_v7_defconfig : passed 1:22.81 beaver multi_v7_defconfig : passed 0:54.57 capri bcm_defconfig : passed 0:42.09 capri multi_v7_defconfig : passed 0:43.85 cubie sunxi_defconfig : passed 0:50.89 cubie multi_v7_defconfig : passed 0:57.13 cubie2 sunxi_defconfig : passed 0:49.61 cubie2 multi_v7_defconfig : passed 0:58.52 cubie2 multi_lpae_defconfig : passed 0:49.28 cubox dove_defconfig : passed 1:07.75 dalmore multi_v7_defconfig : passed 1:19.31 dalmore multi_lpae_defconfig : passed 1:18.65 hummingboard imx_v6_v7_defconfig : warnings 1:14.87 panda omap2plus_defconfig : passed 1:17.64 sama5 sama5_defconfig : passed 1:57.45 seaboard multi_v7_defconfig : passed 1:12.63 snow exynos_defconfig : passed 1:21.08 snowball u8500_defconfig : passed 2:18.59 snowball multi_v7_defconfig : passed 2:04.68 trimslice multi_v7_defconfig : passed 0:58.68 wandboard imx_v6_v7_defconfig : warnings 0:57.96 wandboard multi_v7_defconfig : passed 1:03.05 Board legend is available at http://arm-soc.lixom.net/boards.html Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.085603] hub 1-0:1.0: 1 port detected [ 1.090255] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.095327] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.100275] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.125581] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.131719] hub 2-0:1.0: USB hub found [ 1.135514] hub 2-0:1.0: 1 port detected [ 1.140193] mousedev: PS/2 mouse device common for all mice [ 1.147496] i2c /dev entries driver [ 1.152321] sdhci: Secure Digital Host Controller Interface driver [ 1.158552] sdhci: Copyright(c) Pierre Ossman [ 1.163418] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.169649] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.178833] mmc0: no vqmmc regulator found [ 1.225589] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.233648] usbcore: registered new interface driver usbhid [ 1.239264] usbhid: USB HID core driver [ 1.249587] TCP: cubic registered [ 1.252944] NET: Registered protocol family 17 [ 1.257625] Key type dns_resolver registered [ 1.262013] Registering SWP/SWPB emulation handler [ 1.271969] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.280286] spear_cpufreq: Invalid cpufreq_tbl [ 1.291127] ALSA device list: [ 1.294302] No soundcards found. [ 1.298478] VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0): error -6 [ 1.306263] Please append a correct "root=" boot option; here are the available partitions: [ 1.314626] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.322899] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc8-next-20140117 #1 [ 1.330419] [<c001584c>] (unwind_backtrace) from [<c00113fc>] (show_stack+0x10/0x14) [ 1.338183] [<c00113fc>] (show_stack) from [<c0589ca0>] (dump_stack+0x84/0x94) [ 1.345420] [<c0589ca0>] (dump_stack) from [<c0586cc0>] (panic+0xa0/0x1f4) [ 1.352314] [<c0586cc0>] (panic) from [<c080e01c>] (mount_block_root+0x1a0/0x230) [ 1.359809] [<c080e01c>] (mount_block_root) from [<c080e1b4>] (mount_root+0x108/0x110) [ 1.367734] [<c080e1b4>] (mount_root) from [<c080e314>] (prepare_namespace+0x158/0x1a0) [ 1.375749] [<c080e314>] (prepare_namespace) from [<c080dcd8>] (kernel_init_freeable+0x1cc/0x1dc) [ 1.384633] [<c080dcd8>] (kernel_init_freeable) from [<c058415c>] (kernel_init+0x8/0x120) [ 1.392823] [<c058415c>] (kernel_init) from [<c000e578>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.462432] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.469726] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.477081] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.484680] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 1.492309] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 1.499908] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.505767] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 1.513122] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 1.520477] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.528106] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.535278] usbcore: registered new interface driver usbhid [ 1.541137] usbhid: USB HID core driver [ 1.548583] TCP: cubic registered [ 1.552093] NET: Registered protocol family 17 [ 1.556915] Key type dns_resolver registered [ 1.561828] Power Management for TI OMAP4+ devices. [ 1.566986] Power Management for TI OMAP4. [ 1.571319] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.578704] Registering SWP/SWPB emulation handler [ 1.584442] vwl1271: 1800 mV [ 1.588897] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.598632] twl 0-0048: PIH (irq 39) nested IRQs [ 1.604217] twl_rtc rtc.11: Power up reset detected. [ 1.610046] twl_rtc rtc.11: Enabling TWL-RTC [ 1.617004] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.623779] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.629760] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.635772] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.641723] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.647186] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.652557] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.657562] VDAC: 1800 mV [ 1.660888] VANA: 2100 mV [ 1.664642] VCXIO: 1800 mV [ 1.664642] VUSB: 3300 mV [ 1.671447] V1V8: 1800 mV [ 1.674896] V2V1: 2100 mV [ 1.680511] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz ~$off # PYBOOT: Exception: timeout

11 years, 4 months

next build: 129 warnings 4 failures (next/next-20140117)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: ee8502c Add linux-next specific files for 20140117 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140117/ Runtime: 38m 20s Passed: 119 Failed: 4 Warnings: 129 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ezx_defconfig mvebu_defconfig omap1_defconfig tegra_defconfig ------------------------------------------------------------------------------- Errors: ezx_defconfig: arch/arm/Kconfig:1966:error: recursive dependency detected! mvebu_defconfig: arch/arm/Kconfig:1966:error: recursive dependency detected! omap1_defconfig: arch/arm/Kconfig:1966:error: recursive dependency detected! tegra_defconfig: arch/arm/Kconfig:1966:error: recursive dependency detected! Warnings: 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 123 mm/nobootmem.c:119:26: warning: unused variable 'size' [-Wunused-variable] Section mismatches:

11 years, 4 months

mainline build: 11 warnings 0 failures (mainline/v3.13-rc8-49-g8b6d79f)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 8b6d79f Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-rc8-49-g8b6d79f/ Runtime: 14m 1s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2140:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

11 years, 4 months

arm-soc boot: 27 passed 1 failed (arm-soc/v3.13-rc5-1178-gf342684)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 1:40.61 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.04 arndale exynos_defconfig : passed 1:05.53 bbb omap2plus_defconfig : passed 1:36.85 beaver tegra_defconfig : passed 0:55.59 beaver multi_v7_defconfig : passed 0:51.78 capri bcm_defconfig : passed 0:42.64 capri multi_v7_defconfig : passed 0:45.06 cubie sunxi_defconfig : passed 0:50.82 cubie multi_v7_defconfig : passed 0:50.71 cubie2 sunxi_defconfig : passed 0:50.28 cubie2 multi_v7_defconfig : passed 0:59.83 cubie2 multi_lpae_defconfig : passed 0:49.94 cubox dove_defconfig : warnings 1:09.02 dalmore tegra_defconfig : passed 1:22.33 dalmore multi_v7_defconfig : passed 1:15.85 dalmore multi_lpae_defconfig : passed 1:19.64 panda omap2plus_defconfig : passed 1:20.58 sama5 sama5_defconfig : passed 1:57.06 seaboard tegra_defconfig : passed 0:58.89 seaboard multi_v7_defconfig : passed 1:05.95 snow exynos_defconfig : passed 1:19.90 snowball u8500_defconfig : passed 1:23.18 snowball multi_v7_defconfig : passed 2:02.91 trimslice tegra_defconfig : passed 1:02.58 trimslice multi_v7_defconfig : passed 0:54.97 wandboard imx_v6_v7_defconfig : passed 1:05.69 wandboard multi_v7_defconfig : passed 1:01.01 Board legend is available at http://arm-soc.lixom.net/boards.html Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.543548] Registering SWP/SWPB emulation handler [ 1.549438] vwl1271: 1800 mV [ 1.553710] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.563507] twl 0-0048: PIH (irq 39) nested IRQs [ 1.569152] twl_rtc rtc.11: Power up reset detected. [ 1.574981] twl_rtc rtc.11: Enabling TWL-RTC [ 1.581848] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.588714] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.594726] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.600738] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.606719] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.612213] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.617584] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.622924] VDAC: 1800 mV [ 1.626129] VANA: 2100 mV [ 1.629608] VCXIO: 1800 mV [ 1.632904] VUSB: 3300 mV [ 1.636352] V1V8: 1800 mV [ 1.639862] V2V1: 2100 mV [ 1.726409] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.877105] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.884521] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 1.893310] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 1.899963] hub 1-1:1.0: USB hub found [ 1.904235] hub 1-1:1.0: 5 ports detected [ 1.909454] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 1.915405] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.923461] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.931060] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 1.939636] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.002441] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 2.010498] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 2.018096] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.043579] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.053924] mmc0: new high speed SDHC card at address b368 [ 2.053955] isa bounce pool size: 16 pages [ 2.064483] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.070495] mmcblk0: p1 p2 ~$off # PYBOOT: Exception: timeout

11 years, 4 months

arm-soc build: 55 warnings 0 failures (arm-soc/v3.13-rc5-1178-gf342684)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: f342684 Merge branch 'next/drivers' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-rc5-1178-gf342684/ Runtime: 21m 8s Passed: 123 Failed: 0 Warnings: 55 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2138:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:201:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:209:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:299:28: warning: unused variable 'ops' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:346:28: warning: unused variable 'ops' [-Wunused-variable] Section mismatches:

11 years, 4 months

next boot: 29 passed 2 failed (next/next-20140116)

by Olof's autobooter

Failed boards: hummingboard multi_v7_defconfig : FAILED 0:26.34 panda multi_v7_defconfig : FAILED 1:33.88 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.82 arndale exynos_defconfig : passed 1:06.65 bbb omap2plus_defconfig : passed 1:36.31 bbb multi_v7_defconfig : passed 1:20.49 beaver tegra_defconfig : passed 0:51.51 beaver multi_v7_defconfig : passed 0:52.39 capri bcm_defconfig : passed 0:42.43 capri multi_v7_defconfig : passed 0:43.81 cubie sunxi_defconfig : passed 0:50.98 cubie multi_v7_defconfig : passed 0:54.90 cubie2 sunxi_defconfig : passed 0:50.12 cubie2 multi_v7_defconfig : passed 0:59.05 cubie2 multi_lpae_defconfig : passed 0:49.88 cubox dove_defconfig : passed 1:08.59 dalmore tegra_defconfig : passed 1:22.90 dalmore multi_v7_defconfig : passed 1:14.45 dalmore multi_lpae_defconfig : passed 1:17.63 hummingboard imx_v6_v7_defconfig : warnings 1:14.83 panda omap2plus_defconfig : passed 1:14.24 sama5 sama5_defconfig : passed 1:55.17 seaboard tegra_defconfig : passed 1:01.33 seaboard multi_v7_defconfig : passed 1:03.18 snow exynos_defconfig : passed 1:21.43 snowball u8500_defconfig : passed 1:24.21 snowball multi_v7_defconfig : passed 2:04.58 trimslice tegra_defconfig : passed 0:59.79 trimslice multi_v7_defconfig : passed 0:55.55 wandboard imx_v6_v7_defconfig : warnings 1:02.43 wandboard multi_v7_defconfig : passed 0:56.65 Board legend is available at http://arm-soc.lixom.net/boards.html Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.085740] hub 1-0:1.0: 1 port detected [ 1.090392] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.095464] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.100411] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.125718] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.131871] hub 2-0:1.0: USB hub found [ 1.135664] hub 2-0:1.0: 1 port detected [ 1.140345] mousedev: PS/2 mouse device common for all mice [ 1.147614] i2c /dev entries driver [ 1.152388] sdhci: Secure Digital Host Controller Interface driver [ 1.158619] sdhci: Copyright(c) Pierre Ossman [ 1.163460] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.169678] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.178860] mmc0: no vqmmc regulator found [ 1.225727] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.233754] usbcore: registered new interface driver usbhid [ 1.239371] usbhid: USB HID core driver [ 1.249666] TCP: cubic registered [ 1.253023] NET: Registered protocol family 17 [ 1.257705] Key type dns_resolver registered [ 1.262094] Registering SWP/SWPB emulation handler [ 1.272065] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.280380] spear_cpufreq: Invalid cpufreq_tbl [ 1.291262] ALSA device list: [ 1.294438] No soundcards found. [ 1.298612] VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0): error -6 [ 1.306397] Please append a correct "root=" boot option; here are the available partitions: [ 1.314761] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.323034] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc8-next-20140116 #1 [ 1.330555] [<c001584c>] (unwind_backtrace) from [<c00113fc>] (show_stack+0x10/0x14) [ 1.338315] [<c00113fc>] (show_stack) from [<c05888ec>] (dump_stack+0x84/0x94) [ 1.345552] [<c05888ec>] (dump_stack) from [<c058590c>] (panic+0xa0/0x1f4) [ 1.352444] [<c058590c>] (panic) from [<c080901c>] (mount_block_root+0x1a0/0x230) [ 1.359937] [<c080901c>] (mount_block_root) from [<c08091b4>] (mount_root+0x108/0x110) [ 1.367862] [<c08091b4>] (mount_root) from [<c0809314>] (prepare_namespace+0x158/0x1a0) [ 1.375875] [<c0809314>] (prepare_namespace) from [<c0808cd8>] (kernel_init_freeable+0x1cc/0x1dc) [ 1.384757] [<c0808cd8>] (kernel_init_freeable) from [<c0582da8>] (kernel_init+0x8/0x120) [ 1.392945] [<c0582da8>] (kernel_init) from [<c000e578>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.452880] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.460144] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.467437] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.475006] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 1.482574] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 1.490142] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.495971] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 1.503265] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 1.510559] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.518157] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.525268] usbcore: registered new interface driver usbhid [ 1.531097] usbhid: USB HID core driver [ 1.538391] TCP: cubic registered [ 1.541870] NET: Registered protocol family 17 [ 1.546691] Key type dns_resolver registered [ 1.551574] Power Management for TI OMAP4+ devices. [ 1.556701] Power Management for TI OMAP4. [ 1.560974] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.568054] Registering SWP/SWPB emulation handler [ 1.574127] vwl1271: 1800 mV [ 1.579162] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.588348] twl 0-0048: PIH (irq 39) nested IRQs [ 1.593933] twl_rtc rtc.11: Power up reset detected. [ 1.599822] twl_rtc rtc.11: Enabling TWL-RTC [ 1.606781] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.613677] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.619659] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.625640] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.631622] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.637176] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.642547] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.647552] VDAC: 1800 mV [ 1.647552] VANA: 2100 mV [ 1.654602] VCXIO: 1800 mV [ 1.657562] VUSB: 3300 mV [ 1.661407] V1V8: 1800 mV [ 1.664916] V2V1: 2100 mV [ 1.760314] usb 1-1: new high-speed USB device number 2 using ehci-omap ~$off # PYBOOT: Exception: timeout

11 years, 4 months

next build: 129 warnings 0 failures (next/next-20140116)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 5a0b6dd Add linux-next specific files for 20140116 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140116/ Runtime: 42m 33s Passed: 123 Failed: 0 Warnings: 129 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 123 mm/nobootmem.c:119:26: warning: unused variable 'size' [-Wunused-variable] Section mismatches:

11 years, 4 months

queue boot: 31 pass, 0 fail (v3.12.8)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.8 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 24.4 sec omap3-beagle-xm PASS: 1 min 4.1 sec am335x-bone PASS: 0 min 26.2 sec omap4-panda PASS: 1 min 4.9 sec omap4-panda-es PASS: 1 min 3.6 sec omap3-tobi,3730storm PASS: 0 min 20.3 sec omap3-tobi,3530overo PASS: 0 min 21.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.0 sec imx6q-wandboard PASS: 0 min 14.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 26.7 sec tegra30-beaver PASS: 0 min 20.7 sec am335x-boneblack PASS: 0 min 31.6 sec omap3-beagle-xm PASS: 0 min 60.0 sec sun7i-a20-cubieboard2 PASS: 0 min 13.0 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 2.3 sec omap4-panda-es PASS: 1 min 2.8 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec am335x-bone PASS: 0 min 33.2 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 19.9 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 4 months

mainline boot: 32 pass, 0 fail (v3.13-rc8-46-g85ce70f)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-rc8-46-g85ce70f Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 24.9 sec omap3-beagle-xm PASS: 1 min 1.6 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 6.1 sec omap4-panda-es PASS: 1 min 2.0 sec omap3-tobi,3730storm PASS: 0 min 23.6 sec omap3-tobi,3530overo PASS: 0 min 22.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.0 sec imx6q-wandboard PASS: 0 min 16.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 1 min 1.2 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 29.8 sec tegra30-beaver PASS: 0 min 17.6 sec am335x-boneblack PASS: 0 min 21.8 sec omap3-beagle-xm PASS: 0 min 55.5 sec sun7i-a20-cubieboard2 PASS: 0 min 13.1 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 2.6 sec omap4-panda-es PASS: 0 min 59.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec am335x-bone PASS: 0 min 23.5 sec imx6q-wandboard PASS: 0 min 16.8 sec omap3-tobi,3730storm PASS: 0 min 19.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.8 sec omap3-tobi,3530overo PASS: 0 min 23.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 27.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 4 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports