Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

mainline build: 11 warnings 0 failures (mainline/v3.13-3667-ge1ba845)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: e1ba845 Merge tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-3667-ge1ba845/ Runtime: 23m 4s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2140:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

11 years, 3 months

queue boot: 24 passed 2 failed (queue/v3.12.8-25-g45e6db5)

by Olof's autobooter

Failed boards: bbb omap2plus_defconfig : FAILED 1:37.09 bbb multi_v7_defconfig : FAILED 1:36.06 Successful boards: arndale exynos_defconfig : passed 1:11.01 beaver tegra_defconfig : passed 0:54.32 beaver multi_v7_defconfig : passed 0:40.44 capri bcm_defconfig : passed 0:45.73 capri multi_v7_defconfig : passed 0:42.43 cubie multi_v7_defconfig : passed 0:57.54 cubie2 multi_v7_defconfig : passed 0:53.24 cubie2 multi_lpae_defconfig : passed 0:53.56 cubox dove_defconfig : passed 0:56.44 dalmore tegra_defconfig : passed 1:19.42 dalmore multi_v7_defconfig : passed 1:02.97 dalmore multi_lpae_defconfig : passed 1:01.87 panda omap2plus_defconfig : passed 1:16.09 panda multi_v7_defconfig : passed 1:10.08 sama5 sama5_defconfig : passed 1:57.95 seaboard tegra_defconfig : passed 1:04.75 seaboard multi_v7_defconfig : passed 0:57.91 snow exynos_defconfig : passed 1:32.44 snowball u8500_defconfig : passed 1:22.70 snowball multi_v7_defconfig : passed 0:49.87 trimslice tegra_defconfig : passed 0:58.45 trimslice multi_v7_defconfig : passed 0:48.49 wandboard imx_v6_v7_defconfig : passed 0:51.48 wandboard multi_v7_defconfig : passed 0:47.11 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.245026] RPC: Registered tcp transport module. [ 0.245037] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.245817] mop500-uib: failed to get adapter i2c2 [ 0.262208] NFS: Registering the id_resolver key type [ 0.262325] Key type id_resolver registered [ 0.262339] Key type id_legacy registered [ 0.262738] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.262760] io scheduler noop registered [ 0.262772] io scheduler deadline registered [ 0.263017] io scheduler cfq registered (default) [ 0.263871] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.341856] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.343743] Serial: IMX driver [ 0.344712] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.937740] console [ttyO0] enabled [ 0.942543] serial: Freescale lpuart driver [ 0.947317] [drm] Initialized drm 1.1.0 20060810 [ 0.954265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.961204] ehci-platform: EHCI generic platform driver [ 0.966828] ehci-omap: OMAP-EHCI Host Controller driver [ 0.972456] ehci-orion: EHCI orion driver [ 0.976769] SPEAr-ehci: EHCI SPEAr driver [ 0.981123] tegra-ehci: Tegra EHCI driver [ 0.985702] usbcore: registered new interface driver usb-storage [ 0.993533] mousedev: PS/2 mouse device common for all mice [ 1.000825] sdhci: Secure Digital Host Controller Interface driver [ 1.007346] sdhci: Copyright(c) Pierre Ossman [ 1.012385] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.019344] usbcore: registered new interface driver usbhid [ 1.025266] usbhid: USB HID core driver [ 1.029715] TCP: cubic registered [ 1.034136] NET: Registered protocol family 10 [ 1.039968] sit: IPv6 over IPv4 tunneling driver [ 1.045942] Key type dns_resolver registered [ 1.050711] Registering SWP/SWPB emulation handler [ 1.057905] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.064001] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.074086] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.823681] i2c /dev entries driver [ 1.827944] Driver for 1-wire Dallas network protocol. [ 1.840385] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.853150] of_get_named_gpio_flags exited with status 53 [ 1.858867] of_get_named_gpio_flags exited with status 54 [ 1.864660] of_get_named_gpio_flags exited with status 55 [ 1.870358] of_get_named_gpio_flags exited with status 56 [ 1.876137] of_get_named_gpio_flags exited with status 53 [ 1.884128] of_get_named_gpio_flags exited with status 54 [ 1.890840] of_get_named_gpio_flags exited with status 55 [ 1.897915] of_get_named_gpio_flags exited with status 56 [ 1.906952] ledtrig-cpu: registered to indicate activity on CPUs [ 1.915634] usbcore: registered new interface driver usbhid [ 1.921511] usbhid: USB HID core driver [ 1.927428] oprofile: no performance counters [ 1.935533] oprofile: using timer interrupt. [ 1.940959] TCP: cubic registered [ 1.944703] Initializing XFRM netlink socket [ 1.949412] NET: Registered protocol family 17 [ 1.954283] NET: Registered protocol family 15 [ 1.959478] Key type dns_resolver registered [ 1.964205] ThumbEE CPU extension supported. [ 1.990443] DCDC1: at 1500 mV [ 1.996978] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.005773] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.013777] LDO1: at 1800 mV [ 2.019710] LDO2: at 3300 mV [ 2.026827] LDO3: 1800 mV [ 2.032690] LDO4: at 3300 mV [ 2.038606] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.045279] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.122416] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.128859] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.139042] libphy: 4a101000.mdio: probed [ 2.143440] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.153657] Random MACID = be:44:6b:01:5c:7a [ 2.164679] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.178695] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

11 years, 3 months

queue build: 17 warnings 0 failures (queue/v3.12.8-25-g45e6db5)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 45e6db5 ARM: 7934/1: DT/kernel: fix arch_match_cpu_phys_id to avoid erroneous match Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.8-25-g45e6db5/ Runtime: 33m 59s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 3 months

arm-soc boot: 36 pass, 1 fail (v3.13-rc5-1194-gdbd3277)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.13-rc5-1194-gdbd3277 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.4 sec omap3-beagle-xm PASS: 0 min 57.5 sec am335x-bone PASS: 0 min 27.4 sec omap3-tobi,3530overo PASS: 0 min 22.6 sec omap4-panda PASS: 1 min 18.0 sec omap4-panda-es PASS: 1 min 11.3 sec omap3-tobi,3730storm PASS: 0 min 21.7 sec omap3-beagle PASS: 0 min 42.4 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.2 sec imx6q-wandboard PASS: 0 min 17.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.8 sec sun4i-a10-cubieboard PASS: 0 min 13.8 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.3 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 16.7 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 23.4 sec omap3-beagle-xm PASS: 0 min 51.7 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 21.3 sec omap4-panda PASS: 0 min 51.2 sec omap4-panda-es FAIL: 1 min 44.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.9 sec sun4i-a10-cubieboard PASS: 0 min 19.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.8 sec omap3-tobi,3530overo PASS: 0 min 21.3 sec am335x-bone PASS: 0 min 25.0 sec imx6q-wandboard PASS: 0 min 17.3 sec omap3-tobi,3730storm PASS: 0 min 24.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec omap3-beagle PASS: 0 min 41.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 28.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ I2C: ready DRAM: 1 GiB MMC: OMAP SD/MMC: 0 Using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 3 2 1 0 mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 435 bytes read in 4 ms (105.5 KiB/s) Importing environment from mmc0 ... Running uenvcmd ... (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 104.74 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

mainline boot: 37 pass, 0 fail (v3.13-3477-gdf32e43)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-3477-gdf32e43 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 1 min 0.2 sec am335x-bone PASS: 0 min 27.1 sec omap3-tobi,3530overo PASS: 0 min 22.6 sec omap4-panda PASS: 1 min 3.9 sec omap4-panda-es PASS: 1 min 12.7 sec omap3-tobi,3730storm PASS: 0 min 25.2 sec omap3-beagle PASS: 0 min 34.8 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 20.7 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 20.3 sec imx6q-wandboard PASS: 0 min 17.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.8 sec sun4i-a10-cubieboard PASS: 0 min 12.9 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox PASS: 0 min 19.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.0 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 32.3 sec tegra30-beaver PASS: 0 min 14.2 sec am335x-boneblack PASS: 0 min 22.5 sec omap3-beagle-xm PASS: 0 min 56.4 sec sun7i-a20-cubieboard2 PASS: 0 min 23.8 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 3.9 sec omap4-panda-es PASS: 1 min 7.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.4 sec sun4i-a10-cubieboard PASS: 0 min 13.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec omap3-tobi,3530overo PASS: 0 min 21.2 sec am335x-bone PASS: 0 min 24.1 sec imx6q-wandboard PASS: 0 min 16.7 sec omap3-tobi,3730storm PASS: 0 min 24.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec omap3-beagle PASS: 0 min 34.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 27.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec

11 years, 3 months

queue boot: 24 passed 2 failed (queue/v3.12.8-5-g68e48c6)

by Olof's autobooter

Failed boards: bbb omap2plus_defconfig : FAILED 1:35.63 bbb multi_v7_defconfig : FAILED 1:34.36 Successful boards: arndale exynos_defconfig : passed 1:05.59 beaver tegra_defconfig : passed 0:53.49 beaver multi_v7_defconfig : passed 0:39.74 capri bcm_defconfig : passed 0:42.27 capri multi_v7_defconfig : passed 0:41.68 cubie multi_v7_defconfig : passed 0:56.72 cubie2 multi_v7_defconfig : passed 0:52.61 cubie2 multi_lpae_defconfig : passed 1:00.29 cubox dove_defconfig : passed 0:52.73 dalmore tegra_defconfig : passed 1:17.26 dalmore multi_v7_defconfig : passed 1:02.80 dalmore multi_lpae_defconfig : passed 0:59.85 panda omap2plus_defconfig : passed 1:18.57 panda multi_v7_defconfig : passed 1:05.21 sama5 sama5_defconfig : passed 1:56.01 seaboard tegra_defconfig : passed 0:57.80 seaboard multi_v7_defconfig : passed 0:55.86 snow exynos_defconfig : passed 1:26.29 snowball u8500_defconfig : passed 1:24.51 snowball multi_v7_defconfig : passed 0:53.45 trimslice tegra_defconfig : passed 0:58.52 trimslice multi_v7_defconfig : passed 0:47.24 wandboard imx_v6_v7_defconfig : passed 0:50.38 wandboard multi_v7_defconfig : passed 0:55.90 Board legend is available at http://arm-soc.lixom.net/boards.html Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.245125] RPC: Registered tcp transport module. [ 0.245135] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.245910] mop500-uib: failed to get adapter i2c2 [ 0.262312] NFS: Registering the id_resolver key type [ 0.262427] Key type id_resolver registered [ 0.262442] Key type id_legacy registered [ 0.262843] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.262863] io scheduler noop registered [ 0.262874] io scheduler deadline registered [ 0.263121] io scheduler cfq registered (default) [ 0.263970] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.341946] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.343831] Serial: IMX driver [ 0.344803] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.937872] console [ttyO0] enabled [ 0.942687] serial: Freescale lpuart driver [ 0.947464] [drm] Initialized drm 1.1.0 20060810 [ 0.954406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.961344] ehci-platform: EHCI generic platform driver [ 0.966970] ehci-omap: OMAP-EHCI Host Controller driver [ 0.972602] ehci-orion: EHCI orion driver [ 0.976915] SPEAr-ehci: EHCI SPEAr driver [ 0.981275] tegra-ehci: Tegra EHCI driver [ 0.985852] usbcore: registered new interface driver usb-storage [ 0.993691] mousedev: PS/2 mouse device common for all mice [ 1.000976] sdhci: Secure Digital Host Controller Interface driver [ 1.007497] sdhci: Copyright(c) Pierre Ossman [ 1.012541] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.019501] usbcore: registered new interface driver usbhid [ 1.025423] usbhid: USB HID core driver [ 1.029873] TCP: cubic registered [ 1.034296] NET: Registered protocol family 10 [ 1.040127] sit: IPv6 over IPv4 tunneling driver [ 1.046076] Key type dns_resolver registered [ 1.050838] Registering SWP/SWPB emulation handler [ 1.058037] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.064135] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.074233] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.827526] i2c /dev entries driver [ 1.832102] Driver for 1-wire Dallas network protocol. [ 1.844513] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.856872] of_get_named_gpio_flags exited with status 53 [ 1.862822] of_get_named_gpio_flags exited with status 54 [ 1.868522] of_get_named_gpio_flags exited with status 55 [ 1.874304] of_get_named_gpio_flags exited with status 56 [ 1.880032] of_get_named_gpio_flags exited with status 53 [ 1.887986] of_get_named_gpio_flags exited with status 54 [ 1.894872] of_get_named_gpio_flags exited with status 55 [ 1.901399] of_get_named_gpio_flags exited with status 56 [ 1.910199] ledtrig-cpu: registered to indicate activity on CPUs [ 1.919216] usbcore: registered new interface driver usbhid [ 1.925284] usbhid: USB HID core driver [ 1.931208] oprofile: no performance counters [ 1.939169] oprofile: using timer interrupt. [ 1.944852] TCP: cubic registered [ 1.948358] Initializing XFRM netlink socket [ 1.953095] NET: Registered protocol family 17 [ 1.957891] NET: Registered protocol family 15 [ 1.963171] Key type dns_resolver registered [ 1.967824] ThumbEE CPU extension supported. [ 1.993899] DCDC1: at 1500 mV [ 2.000118] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.008711] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.017004] LDO1: at 1800 mV [ 2.023128] LDO2: at 3300 mV [ 2.030032] LDO3: 1800 mV [ 2.035980] LDO4: at 3300 mV [ 2.043654] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.049408] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.121909] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.128351] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.138460] libphy: 4a101000.mdio: probed [ 2.142852] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.153060] Random MACID = ee:d7:d6:4a:8e:c6 [ 2.164058] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.178102] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

11 years, 3 months

queue build: 17 warnings 0 failures (queue/v3.12.8-5-g68e48c6)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 68e48c6 staging: comedi: adl_pci9111: fix incorrect irq passed to request_irq() Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.8-5-g68e48c6/ Runtime: 34m 9s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 3 months

next boot: 29 passed 2 failed (next/next-20140120)

by Olof's autobooter

Failed boards: hummingboard multi_v7_defconfig : FAILED 0:25.73 panda multi_v7_defconfig : FAILED 1:33.60 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.52 arndale exynos_defconfig : passed 1:04.74 bbb omap2plus_defconfig : passed 1:34.79 bbb multi_v7_defconfig : passed 1:22.50 beaver tegra_defconfig : passed 0:55.17 beaver multi_v7_defconfig : passed 0:48.66 capri bcm_defconfig : passed 0:45.18 capri multi_v7_defconfig : passed 0:43.68 cubie sunxi_defconfig : passed 0:52.26 cubie multi_v7_defconfig : passed 0:57.01 cubie2 sunxi_defconfig : passed 0:49.94 cubie2 multi_v7_defconfig : passed 0:57.00 cubie2 multi_lpae_defconfig : passed 0:50.48 cubox dove_defconfig : passed 1:02.41 dalmore tegra_defconfig : passed 1:23.07 dalmore multi_v7_defconfig : passed 1:18.60 dalmore multi_lpae_defconfig : passed 1:13.83 hummingboard imx_v6_v7_defconfig : warnings 1:18.41 panda omap2plus_defconfig : passed 1:15.87 sama5 sama5_defconfig : passed 1:56.59 seaboard tegra_defconfig : passed 1:03.60 seaboard multi_v7_defconfig : passed 1:09.56 snow exynos_defconfig : passed 1:20.92 snowball u8500_defconfig : passed 1:20.51 snowball multi_v7_defconfig : passed 2:04.36 trimslice tegra_defconfig : passed 0:57.18 trimslice multi_v7_defconfig : passed 0:59.46 wandboard imx_v6_v7_defconfig : warnings 0:57.56 wandboard multi_v7_defconfig : passed 1:04.03 Board legend is available at http://arm-soc.lixom.net/boards.html Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.094873] hub 1-0:1.0: 1 port detected [ 1.099559] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.104631] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.109575] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.134902] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.141040] hub 2-0:1.0: USB hub found [ 1.144836] hub 2-0:1.0: 1 port detected [ 1.149503] mousedev: PS/2 mouse device common for all mice [ 1.156747] i2c /dev entries driver [ 1.161497] sdhci: Secure Digital Host Controller Interface driver [ 1.167728] sdhci: Copyright(c) Pierre Ossman [ 1.172573] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.178794] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.187975] mmc0: no vqmmc regulator found [ 1.234908] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.242937] usbcore: registered new interface driver usbhid [ 1.248551] usbhid: USB HID core driver [ 1.258829] TCP: cubic registered [ 1.262186] NET: Registered protocol family 17 [ 1.266855] Key type dns_resolver registered [ 1.271242] Registering SWP/SWPB emulation handler [ 1.281197] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.289513] spear_cpufreq: Invalid cpufreq_tbl [ 1.300285] ALSA device list: [ 1.303462] No soundcards found. [ 1.307710] VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0): error -6 [ 1.315493] Please append a correct "root=" boot option; here are the available partitions: [ 1.323856] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.332131] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc8-next-20140120 #1 [ 1.339650] [<c001584c>] (unwind_backtrace) from [<c00113fc>] (show_stack+0x10/0x14) [ 1.347416] [<c00113fc>] (show_stack) from [<c058b828>] (dump_stack+0x84/0x94) [ 1.354651] [<c058b828>] (dump_stack) from [<c0588848>] (panic+0xa0/0x1f4) [ 1.361545] [<c0588848>] (panic) from [<c081101c>] (mount_block_root+0x1a0/0x230) [ 1.369039] [<c081101c>] (mount_block_root) from [<c08111b4>] (mount_root+0x108/0x110) [ 1.376965] [<c08111b4>] (mount_root) from [<c0811314>] (prepare_namespace+0x158/0x1a0) [ 1.384980] [<c0811314>] (prepare_namespace) from [<c0810cd8>] (kernel_init_freeable+0x1cc/0x1dc) [ 1.393863] [<c0810cd8>] (kernel_init_freeable) from [<c0585ce4>] (kernel_init+0x8/0x120) [ 1.402052] [<c0585ce4>] (kernel_init) from [<c000e578>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.565734] usbcore: registered new interface driver usbhid [ 1.571624] usbhid: USB HID core driver [ 1.578979] TCP: cubic registered [ 1.582458] NET: Registered protocol family 17 [ 1.587310] Key type dns_resolver registered [ 1.592224] Power Management for TI OMAP4+ devices. [ 1.597381] Power Management for TI OMAP4. [ 1.601684] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.609069] Registering SWP/SWPB emulation handler [ 1.615112] vwl1271: 1800 mV [ 1.619934] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.629119] twl 0-0048: PIH (irq 39) nested IRQs [ 1.634674] twl_rtc rtc.11: Power up reset detected. [ 1.640563] twl_rtc rtc.11: Enabling TWL-RTC [ 1.647521] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.654357] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.660339] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.666351] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.672302] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.677795] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.683197] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.688568] VDAC: 1800 mV [ 1.688568] VANA: 2100 mV [ 1.695220] VCXIO: 1800 mV [ 1.698181] VUSB: 3300 mV [ 1.701995] V1V8: 1800 mV [ 1.705474] V2V1: 2100 mV [ 1.819976] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.920837] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.928375] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 1.937194] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 1.944641] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 1.950958] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.958587] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.962432] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 1.974761] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 1.982940] hub 1-1:1.0: USB hub found [ 1.987152] hub 1-1:1.0: 5 ports detected ~$off # PYBOOT: Exception: timeout

11 years, 3 months

arm-soc boot: 28 passed 1 failed (arm-soc/v3.13-rc5-1194-gdbd3277)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 1:42.18 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:10.73 arndale exynos_defconfig : passed 1:00.34 bbb omap2plus_defconfig : passed 1:31.61 bbb multi_v7_defconfig : passed 1:23.35 beaver tegra_defconfig : passed 0:52.80 beaver multi_v7_defconfig : passed 0:50.12 capri bcm_defconfig : passed 0:43.34 capri multi_v7_defconfig : passed 0:44.44 cubie sunxi_defconfig : passed 0:48.21 cubie multi_v7_defconfig : passed 0:50.59 cubie2 sunxi_defconfig : passed 0:47.13 cubie2 multi_v7_defconfig : passed 1:00.62 cubie2 multi_lpae_defconfig : passed 0:50.26 cubox dove_defconfig : warnings 1:08.43 dalmore tegra_defconfig : passed 1:15.21 dalmore multi_v7_defconfig : passed 1:17.14 dalmore multi_lpae_defconfig : passed 1:15.92 panda omap2plus_defconfig : passed 1:16.94 sama5 sama5_defconfig : passed 1:54.83 seaboard tegra_defconfig : passed 1:00.07 seaboard multi_v7_defconfig : passed 1:06.78 snow exynos_defconfig : passed 1:18.61 snowball u8500_defconfig : passed 1:21.14 snowball multi_v7_defconfig : passed 2:03.70 trimslice tegra_defconfig : passed 0:59.18 trimslice multi_v7_defconfig : passed 1:00.58 wandboard imx_v6_v7_defconfig : passed 0:54.07 wandboard multi_v7_defconfig : passed 1:05.59 Board legend is available at http://arm-soc.lixom.net/boards.html Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.422393] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.428283] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.435607] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.442962] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.450561] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 1.458160] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 1.465789] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.471679] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 1.479003] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 1.486358] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.494018] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.500885] usbcore: registered new interface driver usbhid [ 1.506744] usbhid: USB HID core driver [ 1.513763] TCP: cubic registered [ 1.517272] NET: Registered protocol family 17 [ 1.522094] Key type dns_resolver registered [ 1.527008] Power Management for TI OMAP4+ devices. [ 1.532165] Power Management for TI OMAP4. [ 1.536468] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.543579] Registering SWP/SWPB emulation handler [ 1.549499] vwl1271: 1800 mV [ 1.553771] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.563598] twl 0-0048: PIH (irq 39) nested IRQs [ 1.569244] twl_rtc rtc.11: Power up reset detected. [ 1.575134] twl_rtc rtc.11: Enabling TWL-RTC [ 1.582122] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.588897] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.594909] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.600921] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.607025] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.612426] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.617797] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.622802] VDAC: 1800 mV [ 1.626373] VANA: 2100 mV [ 1.629821] VCXIO: 1800 mV [ 1.633117] VUSB: 3300 mV [ 1.636596] V1V8: 1800 mV [ 1.640106] V2V1: 2100 mV ~$off # PYBOOT: Exception: timeout

11 years, 3 months

arm-soc build: 55 warnings 0 failures (arm-soc/v3.13-rc5-1194-gdbd3277)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: dbd3277 Merge branches 'late/drivers' and 'late/dt' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-rc5-1194-gdbd3277/ Runtime: 21m 33s Passed: 123 Failed: 0 Warnings: 55 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2138:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:201:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:209:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:299:28: warning: unused variable 'ops' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:346:28: warning: unused variable 'ops' [-Wunused-variable] Section mismatches:

11 years, 3 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports