Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

queue build: 17 warnings 0 failures (queue/v3.12.9-5-geed635b)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: eed635b powerpc/thp: Fix crash on mremap Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.9-5-geed635b/ Runtime: 33m 59s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 3 months

queue boot: 35 pass, 0 fail (v3.12.9-2-g798c1f3)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.9-2-g798c1f3 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 24.8 sec omap3-beagle-xm PASS: 0 min 57.1 sec am335x-bone PASS: 0 min 26.7 sec omap4-panda PASS: 1 min 4.9 sec omap4-panda-es PASS: 1 min 1.3 sec omap3-tobi,3730storm PASS: 0 min 21.9 sec omap3-tobi,3530overo PASS: 0 min 22.1 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.8 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec imx6q-wandboard PASS: 0 min 16.2 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.7 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 27.9 sec tegra30-beaver PASS: 0 min 16.6 sec am335x-boneblack PASS: 0 min 32.0 sec omap3-beagle-xm PASS: 0 min 55.5 sec sun7i-a20-cubieboard2 PASS: 0 min 13.5 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 4.9 sec omap4-panda-es PASS: 1 min 0.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.8 sec sun4i-a10-cubieboard PASS: 0 min 18.4 sec bcm28155-ap PASS: 0 min 58.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.5 sec am335x-bone PASS: 0 min 33.7 sec imx6q-wandboard PASS: 0 min 16.0 sec omap3-tobi,3730storm PASS: 0 min 19.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.4 sec omap3-tobi,3530overo PASS: 0 min 20.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 20.0 sec

11 years, 3 months

queue boot: 24 passed 2 failed (queue/v3.12.9-2-g798c1f3)

by Olof's autobooter

Failed boards: bbb omap2plus_defconfig : FAILED 1:36.57 bbb multi_v7_defconfig : FAILED 1:35.36 Successful boards: arndale exynos_defconfig : passed 1:07.46 beaver tegra_defconfig : passed 0:54.34 beaver multi_v7_defconfig : passed 0:39.75 capri bcm_defconfig : passed 0:42.00 capri multi_v7_defconfig : passed 0:42.18 cubie multi_v7_defconfig : passed 0:54.35 cubie2 multi_v7_defconfig : passed 0:50.72 cubie2 multi_lpae_defconfig : passed 0:52.11 cubox dove_defconfig : passed 1:03.36 dalmore tegra_defconfig : passed 1:20.87 dalmore multi_v7_defconfig : passed 1:02.58 dalmore multi_lpae_defconfig : passed 1:00.90 panda omap2plus_defconfig : passed 1:26.26 panda multi_v7_defconfig : passed 1:07.66 sama5 sama5_defconfig : passed 1:53.93 seaboard tegra_defconfig : passed 0:58.54 seaboard multi_v7_defconfig : passed 0:55.17 snow exynos_defconfig : passed 1:28.57 snowball u8500_defconfig : passed 1:21.12 snowball multi_v7_defconfig : passed 0:49.63 trimslice tegra_defconfig : passed 0:58.31 trimslice multi_v7_defconfig : passed 0:47.11 wandboard imx_v6_v7_defconfig : passed 0:55.32 wandboard multi_v7_defconfig : passed 0:51.40 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.245113] RPC: Registered tcp transport module. [ 0.245124] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.245896] mop500-uib: failed to get adapter i2c2 [ 0.262305] NFS: Registering the id_resolver key type [ 0.262420] Key type id_resolver registered [ 0.262434] Key type id_legacy registered [ 0.262835] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.262857] io scheduler noop registered [ 0.262869] io scheduler deadline registered [ 0.263118] io scheduler cfq registered (default) [ 0.263974] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.341801] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.343671] Serial: IMX driver [ 0.344634] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.937624] console [ttyO0] enabled [ 0.942433] serial: Freescale lpuart driver [ 0.947218] [drm] Initialized drm 1.1.0 20060810 [ 0.954170] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.961108] ehci-platform: EHCI generic platform driver [ 0.966736] ehci-omap: OMAP-EHCI Host Controller driver [ 0.972367] ehci-orion: EHCI orion driver [ 0.976682] SPEAr-ehci: EHCI SPEAr driver [ 0.981039] tegra-ehci: Tegra EHCI driver [ 0.985621] usbcore: registered new interface driver usb-storage [ 0.993449] mousedev: PS/2 mouse device common for all mice [ 1.000734] sdhci: Secure Digital Host Controller Interface driver [ 1.007254] sdhci: Copyright(c) Pierre Ossman [ 1.012283] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.019241] usbcore: registered new interface driver usbhid [ 1.025160] usbhid: USB HID core driver [ 1.029611] TCP: cubic registered [ 1.034031] NET: Registered protocol family 10 [ 1.039792] sit: IPv6 over IPv4 tunneling driver [ 1.045834] Key type dns_resolver registered [ 1.050600] Registering SWP/SWPB emulation handler [ 1.057793] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.063890] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.073985] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.825835] i2c /dev entries driver [ 1.830101] Driver for 1-wire Dallas network protocol. [ 1.842274] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.854977] of_get_named_gpio_flags exited with status 53 [ 1.860693] of_get_named_gpio_flags exited with status 54 [ 1.866497] of_get_named_gpio_flags exited with status 55 [ 1.872192] of_get_named_gpio_flags exited with status 56 [ 1.877973] of_get_named_gpio_flags exited with status 53 [ 1.885937] of_get_named_gpio_flags exited with status 54 [ 1.892639] of_get_named_gpio_flags exited with status 55 [ 1.899733] of_get_named_gpio_flags exited with status 56 [ 1.908753] ledtrig-cpu: registered to indicate activity on CPUs [ 1.917482] usbcore: registered new interface driver usbhid [ 1.923356] usbhid: USB HID core driver [ 1.929306] oprofile: no performance counters [ 1.937378] oprofile: using timer interrupt. [ 1.942809] TCP: cubic registered [ 1.946558] Initializing XFRM netlink socket [ 1.951264] NET: Registered protocol family 17 [ 1.956135] NET: Registered protocol family 15 [ 1.961326] Key type dns_resolver registered [ 1.966055] ThumbEE CPU extension supported. [ 1.992140] DCDC1: at 1500 mV [ 1.998685] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.006999] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.014964] LDO1: at 1800 mV [ 2.020901] LDO2: at 3300 mV [ 2.028114] LDO3: 1800 mV [ 2.033720] LDO4: at 3300 mV [ 2.039968] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.046657] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.123967] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.130409] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.140626] libphy: 4a101000.mdio: probed [ 2.145056] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.155224] Random MACID = 1a:f5:84:b7:98:80 [ 2.166202] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.180146] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

11 years, 3 months

queue build: 17 warnings 0 failures (queue/v3.12.9-2-g798c1f3)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 798c1f3 md/raid5: fix long-standing problem with bitmap handling on write failure. Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.9-2-g798c1f3/ Runtime: 34m 5s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 3 months

mainline boot: 32 pass, 5 fail (v3.13-10094-g9b0cd30)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-10094-g9b0cd30 Failed boot tests (console logs at the end) =========================================== omap3-tobi,3730storm: FAIL: omap2plus_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 1 min 0.2 sec am335x-bone PASS: 0 min 27.3 sec omap4-panda PASS: 1 min 5.9 sec omap4-panda-es PASS: 1 min 16.3 sec omap3-tobi,3730storm FAIL: 1 min 20.4 sec omap3-tobi,3530overo PASS: 0 min 23.1 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 17.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec imx6q-wandboard PASS: 0 min 17.3 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 15.1 sec sun4i-a10-cubieboard PASS: 0 min 17.3 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.1 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 29.5 sec tegra30-beaver PASS: 0 min 14.2 sec am335x-boneblack PASS: 0 min 22.4 sec omap3-beagle-xm PASS: 1 min 1.4 sec sun7i-a20-cubieboard2 PASS: 0 min 13.9 sec armada-370-mirabox FAIL: 0 min 28.7 sec omap4-panda PASS: 1 min 5.6 sec omap4-panda-es PASS: 1 min 11.8 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 30.3 sec sun4i-a10-cubieboard PASS: 0 min 13.7 sec bcm28155-ap PASS: 0 min 58.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone PASS: 0 min 25.4 sec imx6q-wandboard PASS: 0 min 16.3 sec omap3-tobi,3730storm FAIL: 0 min 25.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.4 sec omap3-tobi,3530overo PASS: 0 min 20.7 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.3 sec armada-370-mirabox PASS: 0 min 20.2 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ [ 5.963562] Workqueue: kmmcd mmc_rescan [ 5.967620] [<c0015410>] (unwind_backtrace) from [<c001200c>] (show_stack+0x10/0x14) [ 5.975799] [<c001200c>] (show_stack) from [<c05421b8>] (dump_stack+0x7c/0x94) [ 5.983428] [<c05421b8>] (dump_stack) from [<c004045c>] (warn_slowpath_common+0x6c/0x90) [ 5.991973] [<c004045c>] (warn_slowpath_common) from [<c004051c>] (warn_slowpath_null+0x1c/0x24) [ 6.001251] [<c004051c>] (warn_slowpath_null) from [<c02f8d14>] (omap3_l3_app_irq+0xcc/0x120) [ 6.010253] [<c02f8d14>] (omap3_l3_app_irq) from [<c00904a0>] (handle_irq_event_percpu+0x5c/0x21c) [ 6.019714] [<c00904a0>] (handle_irq_event_percpu) from [<c009069c>] (handle_irq_event+0x3c/0x5c) [ 6.029083] [<c009069c>] (handle_irq_event) from [<c0092f94>] (handle_level_irq+0xac/0x118) [ 6.037902] [<c0092f94>] (handle_level_irq) from [<c008fc28>] (generic_handle_irq+0x28/0x3c) [ 6.046783] [<c008fc28>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4) [ 6.055145] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74) [ 6.063781] [<c00085b4>] (omap3_intc_handle_irq) from [<c0548c24>] (__irq_svc+0x44/0x5c) [ 6.072326] Exception stack(0xde0efce0 to 0xde0efd28) [ 6.077667] fce0: de11a000 de0efd2c fa0b4000 00000000 de0efd84 de11a000 00000000 00008002 [ 6.086273] fd00: de4c7b46 de4c7b40 de0efde6 00000000 00000000 de0efd28 c04373f0 c0437280 [ 6.094909] fd20: 20000113 ffffffff [ 6.098602] [<c0548c24>] (__irq_svc) from [<c0437280>] (mmc_wait_for_req_done+0x0/0xec) [ 6.107055] [<c0437280>] (mmc_wait_for_req_done) from [<00000000>] ( (null)) [ 6.114562] ---[ end trace 4e0b94427c8fbf15 ]--- ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 80.44 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2014-01-30 6:11:21 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3699826 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.68 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Image Name: Linux Created: 2014-01-30 6:14:28 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3704447 Bytes = 3.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.26 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/3730storm-wu7R5m/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 56692 (dd74 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffef000, end 8ffffd73 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 25.40 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c04cdc40>] (kernel_init_freeable) from [<c039fad8>] (kernel_init+0x8/0x120) [<c039fad8>] (kernel_init) from [<c000e278>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 8b0c199d68d10af1 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.13.0-10094-g9b0cd30 #1 [<c0014824>] (unwind_backtrace) from [<c00110d4>] (show_stack+0x10/0x14) [<c00110d4>] (show_stack) from [<c03a4300>] (dump_stack+0x80/0x90) [<c03a4300>] (dump_stack) from [<c0013be4>] (handle_IPI+0x148/0x170) [<c0013be4>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c00>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000942 00000000 ee876000 c05024ac c03ab9c8 ee876000 7fc0: c052ec76 00000001 c052ec76 ee876000 00000000 ee877fe8 c000edec c0055720 7fe0: 60000113 ffffffff [<c0011c00>] (__irq_svc) from [<c0055720>] (cpu_startup_entry+0xf4/0x134) [<c0055720>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.27 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

mainline boot: 31 passed 0 failed (mainline/v3.13-10094-g9b0cd30)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:19.08 arndale exynos_defconfig : passed 1:02.14 bbb omap2plus_defconfig : passed 1:31.86 bbb multi_v7_defconfig : passed 1:16.53 beaver tegra_defconfig : passed 0:52.25 beaver multi_v7_defconfig : passed 0:40.44 capri bcm_defconfig : passed 0:44.88 capri multi_v7_defconfig : passed 0:42.75 cubie sunxi_defconfig : passed 0:48.24 cubie multi_v7_defconfig : passed 0:48.95 cubie2 sunxi_defconfig : passed 0:47.19 cubie2 multi_v7_defconfig : passed 0:57.44 cubie2 multi_lpae_defconfig : passed 0:48.52 cubox dove_defconfig : warnings 1:05.44 dalmore tegra_defconfig : passed 1:20.22 dalmore multi_v7_defconfig : passed 1:03.69 dalmore multi_lpae_defconfig : passed 1:01.33 hummingboard imx_v6_v7_defconfig : passed 1:19.67 hummingboard multi_v7_defconfig : passed 0:55.65 panda omap2plus_defconfig : passed 1:19.48 panda multi_v7_defconfig : passed 1:12.68 sama5 sama5_defconfig : passed 1:56.59 seaboard tegra_defconfig : passed 1:04.35 seaboard multi_v7_defconfig : passed 0:52.61 snow exynos_defconfig : passed 1:22.65 snowball u8500_defconfig : passed 1:27.25 snowball multi_v7_defconfig : passed 1:07.01 trimslice tegra_defconfig : passed 0:54.27 trimslice multi_v7_defconfig : passed 0:52.60 wandboard imx_v6_v7_defconfig : passed 1:01.83 wandboard multi_v7_defconfig : passed 1:01.51 Board legend is available at http://arm-soc.lixom.net/boards.html

11 years, 3 months

mainline build: 2 warnings 0 failures (mainline/v3.13-10094-g9b0cd30)

by Olof's autobuilder

11 years, 3 months

next boot: 13 pass, 24 fail (next-20140130)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140130 Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig omap3-tobi,3730storm: FAIL: omap2plus_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig tegra30-beaver: FAIL: tegra_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 26.4 sec omap3-beagle-xm PASS: 0 min 58.5 sec am335x-bone PASS: 0 min 32.3 sec omap4-panda FAIL: 0 min 58.2 sec omap4-panda-es FAIL: 0 min 58.8 sec omap3-tobi,3730storm FAIL: 1 min 20.3 sec omap3-tobi,3530overo PASS: 0 min 22.9 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 19.8 sec tegra_defconfig --------------- tegra30-beaver FAIL: 0 min 12.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard FAIL: 0 min 20.8 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 17.5 sec sun4i-a10-cubieboard FAIL: 0 min 18.8 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 4.0 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 34.3 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 33.3 sec tegra30-beaver FAIL: 0 min 24.2 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 48.1 sec sun7i-a20-cubieboard2 FAIL: 0 min 24.7 sec armada-370-mirabox FAIL: 0 min 29.0 sec omap4-panda FAIL: 0 min 56.6 sec omap4-panda-es FAIL: 0 min 57.8 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec sun4i-a10-cubieboard FAIL: 0 min 24.2 sec bcm28155-ap FAIL: 16 min 23.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.7 sec am335x-bone PASS: 0 min 25.9 sec imx6q-wandboard FAIL: 0 min 20.5 sec omap3-tobi,3730storm FAIL: 0 min 29.3 sec imx6dl-wandboard,wand-dual FAIL: 0 min 22.1 sec omap3-tobi,3530overo PASS: 0 min 21.4 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 28.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 29.3 sec armada-370-mirabox FAIL: 0 min 27.9 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- 8.8 KiB/s done Bytes transferred = 50077 (c39d hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f39c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 58.17 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ 8.8 KiB/s done Bytes transferred = 50489 (c539 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f538 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 58.75 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ [ 5.978454] [<c008fc60>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4) [ 5.986816] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74) [ 5.995452] [<c00085b4>] (omap3_intc_handle_irq) from [<c054c424>] (__irq_svc+0x44/0x5c) [ 6.003997] Exception stack(0xde0efcc0 to 0xde0efd08) [ 6.009307] fcc0: de3b8480 01003600 fa0b4000 34020001 de0efd2c de3b8000 de3b8000 00008002 [ 6.017944] fce0: de4d5606 de4d5600 de0efde6 00000000 00000000 de0efd08 c044f6f4 c0438640 [ 6.026580] fd00: 20000113 ffffffff [ 6.030273] [<c054c424>] (__irq_svc) from [<c0438640>] (mmc_start_request+0xc4/0xe0) [ 6.038421] [<c0438640>] (mmc_start_request) from [<c0438768>] (__mmc_start_req+0x54/0x84) [ 6.047149] [<c0438768>] (__mmc_start_req) from [<c0438c08>] (mmc_wait_for_cmd+0x58/0x88) [ 6.055786] [<c0438c08>] (mmc_wait_for_cmd) from [<c0442704>] (mmc_io_rw_direct_host+0xa4/0x13c) [ 6.065032] [<c0442704>] (mmc_io_rw_direct_host) from [<c04434c8>] (sdio_read_cis+0x168/0x298) [ 6.074127] [<c04434c8>] (sdio_read_cis) from [<c04419ac>] (mmc_sdio_init_card+0x3e0/0xaa4) [ 6.082946] [<c04419ac>] (mmc_sdio_init_card) from [<c0442378>] (mmc_attach_sdio+0x78/0x360) [ 6.091857] [<c0442378>] (mmc_attach_sdio) from [<c043aec8>] (mmc_rescan+0x260/0x2e8) [ 6.100097] [<c043aec8>] (mmc_rescan) from [<c005917c>] (process_one_work+0x1ac/0x4c4) [ 6.108459] [<c005917c>] (process_one_work) from [<c005a014>] (worker_thread+0x114/0x3b4) [ 6.117095] [<c005a014>] (worker_thread) from [<c005fc08>] (kthread+0xcc/0xe8) [ 6.124725] [<c005fc08>] (kthread) from [<c000e548>] (ret_from_fork+0x14/0x2c) [ 6.132324] ---[ end trace d01bc6cc5911634f ]--- ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 80.30 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x4437f8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.82 seconds. # PYBOOT: Result: FAIL tegra_defconfig --------------- tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 0.000000] r10: ffffffff r9 : ffffffff r8 : 3fefffc0 [ 0.000000] r7 : ffffffff r6 : 0000001c r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : 00000000 r1 : ffffffdc r0 : 3fefffc0 [ 0.000000] Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c5387d Table: 8000404a DAC: 00000015 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc07ce240) [ 0.000000] Stack: (0xc07cfef4 to 0xc07d0000) [ 0.000000] fee0: c079da18 ffffffff c001bad8 [ 0.000000] ff00: ffffffff 00000000 c06b9b1c c07e1b78 00000000 ffffffff 0000001c c079dbec [ 0.000000] ff20: ffffffff c07d63f4 00080800 c0800000 ffff1000 000ae7f5 00001000 00000007 [ 0.000000] ff40: 00000200 c07b8000 c07b8000 c07d63c8 c06b9b1c c07e1b78 c07dae70 c081d680 [ 0.000000] ff60: c085b20c c0790fa8 ffffffff 10c5387d c07dae70 c081d540 00000001 ffffffff [ 0.000000] ff80: c07ce000 00000000 c07d63c0 00000000 00000000 c0575f70 c06b869c c081d540 [ 0.000000] ffa0: 00000001 ffffffff c07ce000 00000000 c07d63c0 00000000 00000000 c078e838 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c07bbd78 10c5387d c07d640c [ 0.000000] ffe0: c07bbd74 c07daf80 8000406a 412fc099 00000000 80008074 00000000 00000000 [ 0.000000] Code: e3110020 18a0500c 18a0500c e3110010 (18a0500c) [ 0.000000] ---[ end trace 3406ff24bd97382e ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address 3fefffc0 # PYBOOT: Time: 12.04 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Bytes transferred = 25751 (6497 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4e5800 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009496 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.84 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b05f8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 17.49 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b05f8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.75 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- tftp 0x407c0000 192.168.1.2:tmp/arndale-KsQ1Mq/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.167 Filename 'tmp/arndale-KsQ1Mq/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33440 (82a0 hex) ARNDALE5250 #printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb29f Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 34.26 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- ################################################################# ############################################## done Bytes transferred = 4481177 (446099 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4481113 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.33 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ Bytes transferred = 23808 (5d00 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x43d5a0 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008cff Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 24.23 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x43d5a0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 24.72 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2014-01-30 5:07:19 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4455810 Bytes = 4.2 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.04 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- 5.9 KiB/s done Bytes transferred = 50077 (c39d hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f39c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.61 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ 8.8 KiB/s done Bytes transferred = 50489 (c539 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f538 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 57.83 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Image Name: Linux Created: 2014-01-30 5:10:27 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4460484 Bytes = 4.3 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 31.59 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x43d5a0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 24.20 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 24 lines of boot log: --------------------------------------------- File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-01-30 05:30:19 AM INFO: CriticalError <LAVA_DISPATCHER>2014-01-30 05:30:19 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-01-30 05:30:19 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-01-30 05:30:20 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/f042c2596abf5a6526ec1a22d9cf1c7c… LBOOT: Result: FAIL LBOOT: Time: 983.48 seconds. imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Bytes transferred = 25751 (6497 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x43d5a0 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009496 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.47 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/3730storm-IqdbQb/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 56692 (dd74 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffef000, end 8ffffd73 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.26 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------ 1.5 MiB/s done Bytes transferred = 24398 (5f4e hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11008f4d Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.12 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- ################################################################# ###### done Bytes transferred = 2939433 (2cda29 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2939369 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.18 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Image Name: Linux Created: 2014-01-30 5:39:42 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2773612 Bytes = 2.6 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.27 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2014-01-30 5:39:14 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2768938 Bytes = 2.6 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.89 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

mainline boot: 27 passed 0 failed (mainline/v3.13-9469-gca2a650)

by Olof's autobooter

Failed boards: beaver tegra_defconfig : BUILD FAILED dalmore tegra_defconfig : BUILD FAILED seaboard tegra_defconfig : BUILD FAILED trimslice tegra_defconfig : BUILD FAILED Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.68 arndale exynos_defconfig : passed 1:02.35 bbb omap2plus_defconfig : passed 1:31.03 bbb multi_v7_defconfig : passed 1:21.32 beaver multi_v7_defconfig : passed 0:39.80 capri bcm_defconfig : passed 0:42.13 capri multi_v7_defconfig : passed 0:42.63 cubie sunxi_defconfig : passed 0:47.98 cubie multi_v7_defconfig : passed 0:48.80 cubie2 sunxi_defconfig : passed 0:47.46 cubie2 multi_v7_defconfig : passed 0:58.53 cubie2 multi_lpae_defconfig : passed 0:47.94 cubox dove_defconfig : warnings 1:09.29 dalmore multi_v7_defconfig : passed 1:00.70 dalmore multi_lpae_defconfig : passed 1:00.82 hummingboard imx_v6_v7_defconfig : passed 1:19.98 hummingboard multi_v7_defconfig : passed 0:55.41 panda omap2plus_defconfig : passed 1:16.89 panda multi_v7_defconfig : passed 1:11.82 sama5 sama5_defconfig : passed 1:55.98 seaboard multi_v7_defconfig : passed 0:51.11 snow exynos_defconfig : passed 1:23.53 snowball u8500_defconfig : passed 1:23.78 snowball multi_v7_defconfig : passed 1:08.03 trimslice multi_v7_defconfig : passed 0:43.35 wandboard imx_v6_v7_defconfig : passed 0:53.39 wandboard multi_v7_defconfig : passed 0:55.97 Board legend is available at http://arm-soc.lixom.net/boards.html

11 years, 3 months

mainline build: 5 warnings 1 failures (mainline/v3.13-9469-gca2a650)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: ca2a650 Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-9469-gca2a650/ Runtime: 32m 25s Passed: 122 Failed: 1 Warnings: 5 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: tegra_defconfig ------------------------------------------------------------------------------- Errors: tegra_defconfig: drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] Warnings: 1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] Section mismatches:

11 years, 3 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports