Kernel-build-reports

kernel-build-reports@lists.linaro.org

107303 discussions

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.15 Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: omap2plus_defconfig omap5-uevm: FAIL: multi_lpae_defconfig omap5-uevm: OFFLINE: multi_v7_defconfig da850-evm: FAIL: davinci_all_defconfig armada-370-mirabox: FAIL: mvebu_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.0 sec: PASS legacy,da850evm 0 min 13.8 sec: PASS omap2plus_defconfig ------------------- legacy,3730xm 0 min 48.3 sec: PASS am335x-boneblack 0 min 24.8 sec: PASS omap3-beagle-xm 0 min 56.3 sec: PASS legacy,3530beagle 0 min 40.7 sec: PASS omap4-panda 1 min 8.0 sec: PASS omap3-tobi 0 min 21.7 sec: PASS am335x-bone 0 min 26.6 sec: PASS omap5-uevm 1 min 16.9 sec: FAIL omap4-panda-es 1 min 17.5 sec: PASS legacy,3730storm 0 min 24.0 sec: PASS legacy,3530overo 0 min 24.9 sec: PASS multi_lpae_defconfig -------------------- omap5-uevm 1 min 16.1 sec: FAIL sun7i-a20-cubieboard2 0 min 13.7 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 20.1 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 17.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 17.8 sec: PASS imx6q-wandboard 0 min 16.1 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 22.9 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.8 sec: PASS multi_v7_defconfig ------------------ ste-snowball 0 min 25.4 sec: PASS tegra30-beaver 0 min 17.3 sec: PASS am335x-boneblack 0 min 32.4 sec: PASS omap3-beagle-xm 0 min 56.5 sec: PASS sun7i-a20-cubieboard2 0 min 13.6 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS omap4-panda 1 min 5.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 22.7 sec: PASS sun4i-a10-cubieboard 0 min 18.0 sec: PASS bcm28155-ap 0 min 25.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.8 sec: PASS omap3-tobi 0 min 20.3 sec: PASS am335x-bone 0 min 33.9 sec: PASS omap5-uevm 0 min 31.4 sec: OFFLINE imx6q-wandboard 0 min 16.0 sec: PASS omap4-panda-es 1 min 4.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 17.4 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 36.9 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.3 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.9 sec: PASS da850-evm 0 min 40.8 sec: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 21.9 sec: PASS armada-370-mirabox 0 min 47.8 sec: FAIL Console logs for failures ========================= omap2plus_defconfig ------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- scanning bus 0 for devices... found: 002/007 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-WZ082L/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-WZ082L/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-WZ082L/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ######################### 411.1 KiB/s done Bytes transferred = 4170608 (3fa370 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 90.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-WZ082L/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-WZ082L/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-WZ082L/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *EHCI timed out on TD - token=0x8008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x3fa370 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8757c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 76.88 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/045 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot#setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot#if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-EyDugw/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-EyDugw/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-EyDugw/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################## 491.2 KiB/s done Bytes transferred = 3583592 (36ae68 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 87.9 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-EyDugw/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-EyDugw/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-EyDugw/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *EHCI timed out on TD - token=0x8008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot#bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x36ae68 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8757c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 76.06 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ omap5-uevm: OFFLINE: last 80 lines of boot log: ----------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : ('off', 4, 'on') , sleep 4, found: 002/007 2 ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE davinci_all_defconfig --------------------- da850-evm: FAIL: last 80 lines of boot log: ------------------------------------------- Starting SPI Memory Copy... Valid magicnum, 0x55424CBB, found at offset 0x00010000. DONE Jumping to entry point at 0xC1080000. MMC: davinci: 0 SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Net: DaVinci-EMAC Hit any key to stop autoboot: 3 0 U-Boot > U-Boot > version version U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913 U-Boot > setenv bootargs console=ttyS2,115200n8 debug earlyprintk setenv bootargs console=ttyS2,115200n8 debug earlyprintk U-Boot > if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot > if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot > setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot > dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.194 U-Boot >setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot > if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-Xn6bKS/zImage-dtb-28gvxL tftp 0xc0800000 192.168.1.2:tmp/da850evm-Xn6bKS/zImage-dtb-28gvxL Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-Xn6bKS/zImage-dtb-28gvxL'. Load address: 0xc0800000 Loading: *################################################################# ################################################################# ########### 1.7 MiB/s done Bytes transferred = 2068769 (1f9121 hex) U-Boot >tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'buildroot.cpio.gz.uboot'. Load address: 0xc0c00000 Loading: *############################################ 1.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot > printenv bootargs printenv bootargs bootargs=console=ttyS2,115200n8 debug earlyprintk U-Boot > bootz 0xc0800000 0xc0c00000 bootz 0xc0800000 0xc0c00000 Kernel image @ 0xc0800000 [ 0x000000 - 0x1f7718 ] ## Loading init Ramdisk from Legacy Image at c0c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 40.83 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- phy16= 72 phy16= 72 MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>> version version U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>setenv initrd_high 0xffffffff > setenv initrd_high 0xffffffff Marvell>> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Marvell>> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>setenv autoload no; setenv autoboot no > setenv autoload no; setenv autoboot no Marvell>> dhcp dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client bound to address 192.168.1.183 Marvell>> setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Marvell>> if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-WDd5PR/tmppTdM7H-uImage tftp 0x02000000 192.168.1.2:tmp/mirabox-WDd5PR/tmppTdM7H-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-WDd5PR/tmppTdM7H-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################### done Bytes transferred = 2653461 (287d15 hex) Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) Marvell>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-03-26 16:29:22 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2653397 Bytes = 2.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 47.79 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

queue boot: 10 passed 1 failed (queue/v3.12.15)

by Olof's autobooter

Failed boards: cubie2 multi_lpae_defconfig : FAILED 3:23.58 Successful boards: arndale exynos_defconfig : passed 1:04.30 beaver tegra_defconfig : passed 1:00.21 beaver multi_v7_defconfig : passed 0:55.14 cubie multi_v7_defconfig : passed 0:59.56 cubie2 multi_v7_defconfig : passed 1:14.73 cubox dove_defconfig : passed 1:09.21 seaboard tegra_defconfig : passed 1:13.51 seaboard multi_v7_defconfig : passed 0:53.71 snowball u8500_defconfig : passed 2:40.00 snowball multi_v7_defconfig : passed 0:52.72 Offline boards: bbb omap2plus_defconfig : OFFLINE 1:03.69 bbb multi_v7_defconfig : OFFLINE 1:03.74 capri bcm_defconfig : OFFLINE 1:03.70 capri multi_v7_defconfig : OFFLINE 1:03.70 dalmore tegra_defconfig : OFFLINE 1:03.74 dalmore multi_v7_defconfig : OFFLINE 1:03.69 dalmore multi_lpae_defconfig : OFFLINE 1:03.72 omap5uevm omap2plus_defconfig : OFFLINE 1:03.73 omap5uevm multi_v7_defconfig : OFFLINE 1:03.68 omap5uevm multi_lpae_defconfig : OFFLINE 1:03.70 panda omap2plus_defconfig : OFFLINE 1:06.21 panda multi_v7_defconfig : OFFLINE 1:05.34 sama5 sama5_defconfig : OFFLINE 1:05.22 snow exynos_defconfig : OFFLINE 1:05.51 trimslice tegra_defconfig : OFFLINE 1:03.74 trimslice multi_v7_defconfig : OFFLINE 1:03.86 wandboard imx_v6_v7_defconfig : OFFLINE 1:03.71 wandboard multi_v7_defconfig : OFFLINE 1:03.78 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- Board: Cubieboard2 DRAM: 1024 MiB CPU: 960000000Hz, AXI/AHB/APB: 3/2/2 spl: not an uImage at 1600 U-Boot 2013.10-rc2-00709-g3977e12 (Oct 18 2013 - 16:12:20) Allwinner Technology CPU: Allwinner A20 (SUN7I) Board: Cubieboard2 I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 In: serial Out: serial Err: serial Net: emac Hit any key to stop autoboot: 3 2 1 0 reading uEnv.txt ** Unable to read file uEnv.txt ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading boot.scr ** Unable to read file boot.scr ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading script.bin ** Unable to read file script.bin ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** sun7i# node: cubie2 status: on node: cubie2 status: on ~$off # PYBOOT: Exception: timeout

11 years, 3 months

mainline boot: 11 passed 3 failed (mainline/v3.14-rc8-9-gfce7fc7)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 3:30.04 cubie2 multi_lpae_defconfig : FAILED 3:33.04 snowball u8500_defconfig : FAILED 2:50.03 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:25.64 arndale exynos_defconfig : passed 1:02.51 beaver tegra_defconfig : passed 0:59.52 cubie sunxi_defconfig : passed 0:49.38 cubie multi_v7_defconfig : passed 1:09.48 cubie2 sunxi_defconfig : passed 0:55.06 cubie2 multi_v7_defconfig : passed 1:22.56 cubox dove_defconfig : passed 1:18.19 seaboard tegra_defconfig : passed 1:04.04 seaboard multi_v7_defconfig : passed 1:07.23 snowball multi_v7_defconfig : passed 2:10.96 Offline boards: bbb omap2plus_defconfig : OFFLINE 1:03.69 bbb multi_v7_defconfig : OFFLINE 1:03.71 capri bcm_defconfig : OFFLINE 1:03.70 capri multi_v7_defconfig : OFFLINE 1:03.71 dalmore tegra_defconfig : OFFLINE 1:03.76 dalmore multi_v7_defconfig : OFFLINE 1:03.71 dalmore multi_lpae_defconfig : OFFLINE 1:03.71 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.70 hummingboard multi_v7_defconfig : OFFLINE 1:03.72 omap5uevm omap2plus_defconfig : OFFLINE 1:03.75 omap5uevm multi_v7_defconfig : OFFLINE 1:03.80 omap5uevm multi_lpae_defconfig : OFFLINE 1:03.71 panda omap2plus_defconfig : OFFLINE 1:05.76 panda multi_v7_defconfig : OFFLINE 1:05.68 sama5 sama5_defconfig : OFFLINE 1:05.37 snow exynos_defconfig : OFFLINE 1:05.48 trimslice tegra_defconfig : OFFLINE 1:03.73 trimslice multi_v7_defconfig : OFFLINE 1:03.81 wandboard imx_v6_v7_defconfig : OFFLINE 1:04.16 wandboard multi_v7_defconfig : OFFLINE 1:03.76 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- Scanning mmc 1... MMC: no card present ** Bad device mmc 1 ** MMC: no card present ** Bad device mmc 1 ** MMC: no card present ** Bad device mmc 1 ** MMC: no card present ** Bad device mmc 1 ** mmc0(part 0) is current device Scanning mmc 0... ** File not found /boot.scr.uimg ** ** File not found /boot.scr ** ** File not found /boot/boot.scr.uimg ** ** File not found /boot/boot.scr ** (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found USB device 0: unknown device Waiting for Ethernet connection... done. BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 44 *** Unhandled DHCP Option in OFFER/ACK: 44 DHCP client bound to address 172.16.1.101 Using asx0 device TFTP from server 172.16.1.7; our IP address is 172.16.1.101 Filename 'boot.scr.uimg'. Load address: 0x90000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Tegra30 (Beaver) # node: beaver status: on node: beaver status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- Board: Cubieboard2 DRAM: 1024 MiB CPU: 960000000Hz, AXI/AHB/APB: 3/2/2 spl: not an uImage at 1600 U-Boot 2013.10-rc2-00709-g3977e12 (Oct 18 2013 - 16:12:20) Allwinner Technology CPU: Allwinner A20 (SUN7I) Board: Cubieboard2 I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 In: serial Out: serial Err: serial Net: emac Hit any key to stop autoboot: 3 2 1 0 reading uEnv.txt ** Unable to read file uEnv.txt ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading boot.scr ** Unable to read file boot.scr ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading script.bin ** Unable to read file script.bin ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** sun7i# node: cubie2 status: on node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 18.281463] Bluetooth: RFCOMM socket layer initialized [ 18.286651] Bluetooth: RFCOMM ver 1.11 [ 18.290435] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.295776] Bluetooth: BNEP filters: protocol multicast [ 18.301025] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 18.307403] NET: Registered protocol family 35 [ 18.312347] NET: Registered protocol family 37 [ 18.316986] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 18.325225] Registering SWP/SWPB emulation handler [ 18.337829] l2x0-prefetch: initialized. [ 18.345214] mcde_display_hdmi_init [ 18.349914] regulator_init_complete: LDO-USB: disabling [ 18.355377] regulator_init_complete: db8500-esram34: disabling [ 18.361297] regulator_init_complete: db8500-esram12: disabling [ 18.367828] ab8500-rtc ab8500-rtc.0: setting system clock to 2014-03-26 01:59:04 UTC (1395799144) [ 18.886596] IP-Config: Failed to open eth0 [ 18.890716] IP-Config: No network devices available. [ 18.897979] EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240) [ 19.216369] EXT2-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (244) [ 19.636199] av8100_hdmi av8100_hdmi.1: HDMI display probed [ 19.735198] av8100 0-0070: chip version:2 [ 19.931762] EXT4-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended [ 19.944366] EXT4-fs (mmcblk0p3): recovery complete [ 19.952331] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 19.960449] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 19.967529] devtmpfs: mounted [ 19.970550] Freeing init memory: 216K [ 20.753997] Console: switching to colour frame buffer device 160x45 [ 20.837951] av8100_hdmi av8100_hdmi.1: Framebuffer created (av8100_hdmi) Last login: Wed Mar 26 01:21:15 UTC 2014 on tty1 Welcome to Linaro 11.09 (development branch) (GNU/Linux 2.6.38-1001-ux500 armv7l) * Documentation: https://wiki.linaro.org/ root@linaro-nano:~# root root -bash: root: command not found root@linaro-nano:~# node: snowball status: on ~$off # PYBOOT: Exception: timeout

11 years, 3 months

queue build: 17 warnings 0 failures (queue/v3.12.15)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 46a55da Linux 3.12.15 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.15/ Runtime: 34m 13s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 3 months

next boot: 36 pass, 9 fail (next-20140326)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140326 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig imx6q-wandboard: DEAD: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 55.4 sec: PASS am335x-boneblack 0 min 25.5 sec: PASS omap3-beagle-xm 1 min 0.9 sec: PASS legacy,3530beagle 0 min 56.0 sec: PASS (Warnings: 1) omap4-panda 1 min 1.8 sec: PASS omap3-overo-tobi 0 min 23.4 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 22.2 sec: PASS omap5-uevm 1 min 3.8 sec: PASS (Warnings: 1) omap4-panda-es 1 min 4.5 sec: PASS legacy,3730storm 0 min 19.7 sec: PASS legacy,3530overo 0 min 21.5 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 35.0 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 39.8 sec: FAIL tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 43.0 sec: FAIL imx6dl-wandboard,wand-solo 0 min 42.7 sec: FAIL imx6q-wandboard 0 min 41.2 sec: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 12.6 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.5 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.8 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 16.1 sec: PASS ste-snowball 0 min 53.6 sec: FAIL tegra30-beaver 0 min 17.1 sec: PASS am335x-boneblack 0 min 23.9 sec: PASS omap3-beagle-xm 0 min 53.9 sec: PASS sun7i-a20-cubieboard2 0 min 39.8 sec: FAIL armada-370-mirabox 0 min 22.3 sec: PASS omap4-panda 0 min 55.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS bcm28155-ap 0 min 26.4 sec: PASS omap3-overo-tobi 0 min 22.2 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 42.6 sec: FAIL am335x-bone 0 min 26.4 sec: PASS omap3-overo-storm-tobi 0 min 23.8 sec: PASS omap5-uevm 1 min 35.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 31.4 sec: DEAD omap4-panda-es 0 min 52.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 42.6 sec: FAIL u8500_defconfig --------------- ste-snowball 0 min 33.5 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.1 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.6 sec: PASS da850-evm 0 min 16.4 sec: PASS Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-SQbURL/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-SQbURL/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-SQbURL/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.7 MiB/s done Bytes transferred = 4595512 (461f38 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-SQbURL/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-SQbURL/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-SQbURL/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.2 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x461f38 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.83 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 =>setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no =>dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-dual-plamfp/zImage tftp 0x10800000 192.168.1.2:tmp/wand-dual-plamfp/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-plamfp/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.5 MiB/s done Bytes transferred = 5223896 (4fb5d8 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-dual-plamfp/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-dual-plamfp/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-plamfp/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) =>printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 43.00 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-solo-24J6wT/zImage tftp 0x10800000 192.168.1.2:tmp/wand-solo-24J6wT/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-24J6wT/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.5 MiB/s done Bytes transferred = 5223896 (4fb5d8 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-24J6wT/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-24J6wT/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-24J6wT/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.67 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 => setenv bootargs console=ttymxc0,115200 setenv bootargs console=ttymxc0,115200 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.163 =>setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-quad-aPSDZe/zImage tftp 0x10800000 192.168.1.2:tmp/wand-quad-aPSDZe/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-aPSDZe/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 2.7 MiB/s done Bytes transferred = 5223896 (4fb5d8 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-quad-aPSDZe/imx6q-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-quad-aPSDZe/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-aPSDZe/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 2.3 MiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4fb5d8 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 41.24 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U8500 $ setenv autoload no; setenv autoboot nodhcp U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-2Rc642/tmpCGf08h-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-2Rc642/tmpCGf08h-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-2Rc642/tmpCGf08h-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4610977 (465ba1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4610913 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 53.62 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-mju5iZ/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-mju5iZ/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-mju5iZ/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.7 MiB/s done Bytes transferred = 4569664 (45ba40 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-mju5iZ/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-mju5iZ/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-mju5iZ/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45ba40 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 39.75 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.164 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 => if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-solo-EJ4W5_/zImage tftp 0x10800000 192.168.1.2:tmp/wand-solo-EJ4W5_/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-EJ4W5_/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 1.5 MiB/s done Bytes transferred = 4569664 (45ba40 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-EJ4W5_/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-EJ4W5_/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-EJ4W5_/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ŒÖzÃð`y>8`:027vww9r»öÚ€I$ù2TpU@fxBÔgkVÖò{³Ø/gza2VgkÖ¿ÔãøT+_inB2QÔgVV¿Vc{i+_o@PVgTVFvhotRns`VgkV?TžðÖøËöÄ+ßnú6ð:µ<²°ŒðU"d'Vu|v²ØØ²e?ze0cZ>>>ŽÔ,¬ªÁ?XV`k'3|ÔÖß`ÖØ^wv\dbŒÑÐÓÐ22mXöûºþŒ>ðÏôôÍzŸK`,PÔgÖ¿ð÷Û÷ô§Ý¿ÝÖù÷ûÖ³ÏoVëû7Ôñwx@Tgk×Û÷Û×Ý7Y{Q?VPWVNxWG3ss7ppw.WPàks[ÖÖßü×]~V7YV?YVVw{fzWgÔkzTpWjBaVgxkcd\×}~T7]V?ÙÐð÷ºîú×gVks7xTw×VÀkwý×ýþÖ·ÙûÖ¿ÝÔ×óûæ³ÏoVëûÐqw>pu<9Ÿ06~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.60 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: DEAD: last 80 lines of boot log: ------------------------------------------------- Connected to wand-quad console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(wand-quad console)> hardreset (user:khilman) Reboot wand-quad Reboot: wand-quad ; phidget 2 3 : off, sleep, on U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial 0 => ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'DEAD') # PYBOOT: Time: 31.36 seconds. # PYBOOT: Result: DEAD imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to address 192.168.1.156 => setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 =>if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi => tftp 0x10800000 192.168.1.2:tmp/wand-dual-7ZMZVG/zImage tftp 0x10800000 192.168.1.2:tmp/wand-dual-7ZMZVG/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-7ZMZVG/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #################################################### 1.5 MiB/s done Bytes transferred = 4569664 (45ba40 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-dual-7ZMZVG/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-dual-7ZMZVG/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-7ZMZVG/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 26637 (680d hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100980c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 42.58 seconds. # PYBOOT: Result: FAIL

11 years, 3 months

next boot: 7 passed 6 failed (next/next-20140326)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:50.02 cubie2 sunxi_defconfig : FAILED 1:26.33 cubie2 multi_v7_defconfig : FAILED 1:38.45 cubie2 multi_lpae_defconfig : FAILED 1:05.87 cubox dove_defconfig : BUILD FAILED snowball u8500_defconfig : FAILED 2:47.27 snowball multi_v7_defconfig : FAILED 1:07.63 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:28.97 arndale exynos_defconfig : passed 1:05.82 beaver tegra_defconfig : passed 1:04.38 cubie sunxi_defconfig : passed 0:51.94 cubie multi_v7_defconfig : passed 1:01.65 seaboard tegra_defconfig : passed 1:14.68 seaboard multi_v7_defconfig : passed 1:09.33 Offline boards: bbb omap2plus_defconfig : OFFLINE 1:03.70 bbb multi_v7_defconfig : OFFLINE 1:03.71 capri bcm_defconfig : OFFLINE 1:03.69 capri multi_v7_defconfig : OFFLINE 1:03.71 dalmore tegra_defconfig : OFFLINE 1:03.71 dalmore multi_v7_defconfig : OFFLINE 1:03.71 dalmore multi_lpae_defconfig : OFFLINE 1:03.72 hummingboard imx_v6_v7_defconfig : OFFLINE 1:03.72 hummingboard multi_v7_defconfig : OFFLINE 1:03.70 omap5uevm omap2plus_defconfig : OFFLINE 1:03.76 omap5uevm multi_v7_defconfig : OFFLINE 1:03.70 omap5uevm multi_lpae_defconfig : OFFLINE 1:03.70 panda omap2plus_defconfig : OFFLINE 1:05.81 panda multi_v7_defconfig : OFFLINE 1:05.81 sama5 sama5_defconfig : OFFLINE 1:05.78 snow exynos_defconfig : OFFLINE 1:05.69 trimslice tegra_defconfig : OFFLINE 1:03.72 trimslice multi_v7_defconfig : OFFLINE 1:03.72 wandboard imx_v6_v7_defconfig : OFFLINE 1:03.76 wandboard multi_v7_defconfig : OFFLINE 1:03.75 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- Scanning mmc 1... MMC: no card present ** Bad device mmc 1 ** MMC: no card present ** Bad device mmc 1 ** MMC: no card present ** Bad device mmc 1 ** MMC: no card present ** Bad device mmc 1 ** mmc0(part 0) is current device Scanning mmc 0... ** File not found /boot.scr.uimg ** node: beaver status: on ** File not found /boot.scr ** ** File not found /boot/boot.scr.uimg ** ** File not found /boot/boot.scr ** (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found USB device 0: unknown device Waiting for Ethernet connection... done. BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 44 *** Unhandled DHCP Option in OFFER/ACK: 44 DHCP client bound to address 172.16.1.101 Using asx0 device TFTP from server 172.16.1.7; our IP address is 172.16.1.101 Filename 'boot.scr.uimg'. Load address: 0x90000000 Loading: * TFTP error: 'File not found' (1) Not retrying... Tegra30 (Beaver) # node: beaver status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140326/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'next/next-20140326/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.9 MiB/s done Bytes transferred = 4595512 (461f38 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 17node: cubie2 status: on 2.16.1.3 sun7i# tftp 0x41000000 next/next-20140326/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140326/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.160 Filename 'next/next-20140326/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 385.7 KiB/s done Bytes transferred = 18209 (4721 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x461f38 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff720 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- U-Boot SPL 2013.10-rc2-00709-g3977e12 (Oct 18 2013 - 16:12:20) Board: Cubieboard2 DRAM: 1024 MiB CPU: 960000000Hz, AXI/AHB/APB: 3/2/2 spl: not an uImage at 1600 U-Boot 2013.10-rc2-00709-g3977e12 (Oct 18 2013 - 16:12:20) Allwinner Technology CPU: Allwinner A20 (SUN7I) Board: Cubieboard2 I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 In: serial Out: serial Err: serial Net: emac Hit any key to stop autoboot: 3 2 1 node: cubie2 status: on 0 reading uEnv.txt ** Unable to read file uEnv.txt ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading boot.scr ** Unable to read file boot.scr ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading script.bin ** Unable to read file script.bin ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** sun7i# ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.077060] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.077078] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.077091] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.078019] Switched to clocksource timer [ 0.081765] Clockevents: could not switch to one-shot mode: dummy_timer is not functional. [ 0.081780] Could not switch to high resolution mode on CPU 0 [ 0.085109] NET: Registered protocol family 2 [ 0.085587] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.085674] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.085795] TCP: Hash tables configured (established 8192 bind 8192) [ 0.085878] TCP: reno registered [ 0.085893] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.085950] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.086150] NET: Registered protocol family 1 [ 0.086550] RPC: Registered named UNIX socket transport module. [ 0.086564] RPC: Registered udp transport module. [ 0.086570] RPC: Registered tcp transport module. [ 0.086575] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.087531] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.087994] bounce pool size: 64 pages [ 0.095808] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.095828] io scheduler noop registered [ 0.095835] io scheduler deadline registered [ 0.096007] io scheduler cfq registered (default) [ 0.097622] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.139099] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.141513] console [ttyS0] disabled [ 0.161661] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.658358] console [ttyS0] enabled [ 0.663046] mousedev: PS/2 mouse device common for all mice [ 0.668905] i2c /dev entries driver [ 0.673779] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.682741] TCP: cubic registered [ 0.686063] NET: Registered protocol family 17 [ 0.690588] Registering SWP/SWPB emulation handler [ 0.696324] ahci-5v: 5000 mV [ 0.699546] usb1-vbus: 5000 mV [ 0.702994] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.128 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-dM7QRe/tmpEJpoPH-uImage tftp 0x00100000 tmp/snowball-dM7QRe/tmpEJpoPH-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.128 Filename 'tmp/snowball-dM7QRe/tmpEJpoPH-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 4610977 (465ba1 hex) U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4610913 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 18.309112] NET: Registered protocol family 37 [ 18.313751] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 18.321929] Registering SWP/SWPB emulation handler [ 18.334533] l2x0-prefetch: initialized. [ 18.341766] mcde_display_hdmi_init [ 18.346405] regulator_init_complete: LDO-USB: disabling [ 18.351806] regulator_init_complete: db8500-esram34: disabling [ 18.357757] regulator_init_complete: db8500-esram12: disabling [ 18.364227] ab8500-rtc ab8500-rtc.0: setting system clock to 2014-03-26 07:38:27 UTC (1395819507) [ 18.902709] net eth0: SMSC911x/921x identified at 0xe08c0000, IRQ: 300 [ 19.914123] Sending DHCP requests . [ 19.917785] av8100_hdmi av8100_hdmi.1: HDMI display probed [ 20.013214] av8100 0-0070: chip version:2 [ 21.030578] Console: switching to colour frame buffer device 160x45 [ 21.114532] av8100_hdmi av8100_hdmi.1: Framebuffer created (av8100_hdmi) [ 22.622955] .., OK [ 29.732971] IP-Config: Got DHCP answer from 172.16.1.7, my address is 172.16.1.117 [ 29.739807] IP-Config: Complete: [ 29.739837] device=eth0, addr=172.16.1.117, mask=255.255.255.0, gw=172.16.1.1, [ 29.739898] host=172.16.1.117, domain=lixom.net, nis-domain=(none), [ 29.739929] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 29.767761] EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240) [ 29.834716] EXT2-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (244) [ 30.030731] EXT4-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended [ 30.043975] EXT4-fs (mmcblk0p3): recovery complete [ 30.052124] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 30.060394] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 30.070495] devtmpfs: mounted [ 30.073730] Freeing init memory: 216K Last login: Wed Mar 26 01:59:10 UTC 2014 on tty1 Welcome to Linaro 11.09 (development branch) (GNU/Linux 2.6.38-1001-ux500 armv7l) * Documentation: https://wiki.linaro.org/ root@linaro-nano:~# node: snowball status: on root root -bash: root: command not found root@linaro-nano:~# ~$off # PYBOOT: Exception: timeout

11 years, 3 months

next build: 12 warnings 7 failures (next/next-20140326)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 8e04a0a Add linux-next specific files for 20140326 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140326/ Runtime: 43m 7s Passed: 117 Failed: 7 Warnings: 12 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: dove_defconfig kirkwood_defconfig multi_v5_defconfig mv78xx0_defconfig mvebu_v5_defconfig mvebu_v7_defconfig orion5x_defconfig ------------------------------------------------------------------------------- Errors: dove_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' kirkwood_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' multi_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mv78xx0_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' mvebu_v5_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' mvebu_v7_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' orion5x_defconfig: drivers/i2c/busses/i2c-mv64xxx.c:913: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:893: undefined reference to `reset_control_assert' drivers/i2c/busses/i2c-mv64xxx.c:760: undefined reference to `devm_reset_control_get' drivers/i2c/busses/i2c-mv64xxx.c:767: undefined reference to `reset_control_deassert' Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1251:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 include/linux/kernel.h:54:38: warning: division by zero [-Wdiv-by-zero] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

11 years, 3 months

mainline boot: 48 pass, 0 fail (v3.14-rc8-9-gfce7fc7)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc8-9-gfce7fc7 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.3 sec: PASS (with 1 Warnings) legacy,da850evm 0 min 14.3 sec: PASS (with 1 Warnings) omap2plus_defconfig ------------------- legacy,3730xm 0 min 53.6 sec: PASS am335x-boneblack 0 min 24.5 sec: PASS omap3-beagle-xm 1 min 1.7 sec: PASS legacy,3530beagle 0 min 36.2 sec: PASS (with 1 Warnings) omap4-panda 1 min 4.4 sec: PASS omap3-overo-tobi 0 min 26.2 sec: PASS (with 1 Warnings) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 22.4 sec: PASS omap5-uevm 1 min 7.3 sec: PASS (with 1 Warnings) omap4-panda-es 1 min 1.9 sec: PASS legacy,3730storm 0 min 24.5 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (with 1 Warnings) multi_lpae_defconfig -------------------- omap5-uevm 1 min 46.4 sec: PASS (with 1 Warnings) sun7i-a20-cubieboard2 0 min 14.4 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS msm_defconfig ------------- qcom-apq8074-dragonboard 0 min 16.3 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.1 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 12.8 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.5 sec: PASS multi_v7_defconfig ------------------ ste-snowball 1 min 17.0 sec: PASS tegra30-beaver 0 min 17.0 sec: PASS am335x-boneblack 0 min 23.6 sec: PASS omap3-beagle-xm 0 min 51.3 sec: PASS sun7i-a20-cubieboard2 0 min 14.2 sec: PASS armada-370-mirabox 0 min 22.1 sec: PASS omap4-panda 1 min 5.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.8 sec: PASS sun4i-a10-cubieboard 0 min 14.3 sec: PASS bcm28155-ap 0 min 27.3 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS (with 1 Warnings) imx6dl-wandboard,wand-solo 0 min 17.7 sec: PASS am335x-bone 0 min 26.2 sec: PASS omap3-overo-storm-tobi 0 min 22.2 sec: PASS omap5-uevm 1 min 51.1 sec: PASS (with 1 Warnings) imx6q-wandboard 0 min 17.8 sec: PASS omap4-panda-es 1 min 19.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.1 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 33.3 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.4 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.4 sec: PASS mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 23.7 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS

11 years, 3 months

mainline boot: 48 pass, 0 fail (v3.14-rc8-7-g632b06a)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc8-7-g632b06a Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.4 sec: PASS (with 1 Warnings) legacy,da850evm 0 min 14.4 sec: PASS (with 1 Warnings) omap2plus_defconfig ------------------- legacy,3730xm 0 min 50.8 sec: PASS am335x-boneblack 0 min 25.5 sec: PASS omap3-beagle-xm 1 min 6.9 sec: PASS legacy,3530beagle 0 min 35.5 sec: PASS (with 1 Warnings) omap4-panda 1 min 6.9 sec: PASS omap3-overo-tobi 0 min 22.9 sec: PASS (with 1 Warnings) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 25.3 sec: PASS omap5-uevm 1 min 6.8 sec: PASS (with 1 Warnings) omap4-panda-es 1 min 6.6 sec: PASS legacy,3730storm 0 min 24.0 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (with 1 Warnings) multi_lpae_defconfig -------------------- omap5-uevm 1 min 45.3 sec: PASS (with 1 Warnings) sun7i-a20-cubieboard2 0 min 14.5 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.1 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.4 sec: PASS msm_defconfig ------------- qcom-apq8074-dragonboard 0 min 15.0 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.0 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.7 sec: PASS multi_v7_defconfig ------------------ ste-snowball 1 min 17.3 sec: PASS tegra30-beaver 0 min 20.1 sec: PASS am335x-boneblack 0 min 23.3 sec: PASS omap3-beagle-xm 0 min 50.0 sec: PASS sun7i-a20-cubieboard2 0 min 14.4 sec: PASS armada-370-mirabox 0 min 22.0 sec: PASS omap4-panda 0 min 57.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS sun4i-a10-cubieboard 0 min 14.3 sec: PASS bcm28155-ap 0 min 26.4 sec: PASS omap3-overo-tobi 0 min 21.6 sec: PASS (with 1 Warnings) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.1 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 1 min 43.5 sec: PASS (with 1 Warnings) imx6q-wandboard 0 min 17.6 sec: PASS omap4-panda-es 0 min 56.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.2 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 33.3 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.5 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 16.8 sec: PASS mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS

11 years, 3 months

mainline build: 7 warnings 0 failures (mainline/v3.14-rc8-9-gfce7fc7)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: fce7fc7 fs: remove now stale label in anon_inode_init() Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc8-9-gfce7fc7/ Runtime: 24m 36s Passed: 123 Failed: 0 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

11 years, 3 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports