Kernel-build-reports April 2014

kernel-build-reports@lists.linaro.org

20 participants
319 discussions

mainline boot: 48 pass, 0 fail (v3.14-7333-g59ecc26)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-7333-g59ecc26 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.3 sec: PASS (Warnings: 1) legacy,da850evm 0 min 14.2 sec: PASS (Warnings: 1) omap2plus_defconfig ------------------- legacy,3730xm 0 min 50.3 sec: PASS am335x-boneblack 0 min 25.8 sec: PASS omap3-beagle-xm 1 min 5.2 sec: PASS legacy,3530beagle 0 min 38.4 sec: PASS (Warnings: 1) omap4-panda 1 min 6.4 sec: PASS omap3-overo-tobi 0 min 23.0 sec: PASS (Warnings: 1) am335x-bone 0 min 27.3 sec: PASS omap3-overo-storm-tobi 0 min 22.4 sec: PASS omap5-uevm 1 min 5.3 sec: PASS (Warnings: 1) omap4-panda-es 1 min 8.0 sec: PASS legacy,3730storm 0 min 23.6 sec: PASS legacy,3530overo 0 min 21.0 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 52.6 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 14.3 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.1 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 19.1 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.4 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS msm_defconfig ------------- qcom-apq8074-dragonboard 0 min 14.2 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 22.5 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 11.7 sec: PASS sun4i-a10-cubieboard 0 min 20.3 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 30.2 sec: PASS multi_v7_defconfig ------------------ ste-snowball 1 min 18.1 sec: PASS tegra30-beaver 0 min 17.0 sec: PASS am335x-boneblack 0 min 23.5 sec: PASS omap3-beagle-xm 0 min 47.4 sec: PASS sun7i-a20-cubieboard2 0 min 14.1 sec: PASS armada-370-mirabox 0 min 22.1 sec: PASS omap4-panda 0 min 56.3 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.8 sec: PASS sun4i-a10-cubieboard 0 min 16.6 sec: PASS bcm28155-ap 0 min 26.6 sec: PASS omap3-overo-tobi 0 min 21.8 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.2 sec: PASS am335x-bone 0 min 26.2 sec: PASS omap3-overo-storm-tobi 0 min 20.8 sec: PASS omap5-uevm 1 min 46.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.2 sec: PASS omap4-panda-es 0 min 54.4 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 33.1 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.0 sec: PASS mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS

11 years

mainline boot: 29 passed 4 failed (mainline/v3.14-7333-g59ecc26)

by Olof's autobooter

Failed boards: dalmore tegra_defconfig : FAILED 1:28.54 dalmore multi_v7_defconfig : FAILED 1:04.94 dalmore multi_lpae_defconfig : FAILED 1:05.04 panda multi_v7_defconfig : FAILED 1:36.06 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.71 arndale exynos_defconfig : passed 1:13.53 bbb omap2plus_defconfig : passed 1:33.34 bbb multi_v7_defconfig : passed 1:27.19 beaver tegra_defconfig : passed 0:50.57 beaver multi_v7_defconfig : passed 0:50.61 capri bcm_defconfig : passed 0:43.20 capri multi_v7_defconfig : passed 0:44.08 cubie sunxi_defconfig : passed 1:03.00 cubie multi_v7_defconfig : passed 1:05.49 cubie2 sunxi_defconfig : passed 1:01.85 cubie2 multi_v7_defconfig : passed 1:03.52 cubie2 multi_lpae_defconfig : passed 1:01.30 cubox dove_defconfig : passed 1:02.95 hummingboard imx_v6_v7_defconfig : passed 1:19.41 hummingboard multi_v7_defconfig : passed 1:06.59 omap5uevm multi_v7_defconfig : warnings 1:40.20 omap5uevm multi_lpae_defconfig : warnings 1:36.12 panda omap2plus_defconfig : passed 1:16.24 sama5 sama5_defconfig : passed 1:54.11 seaboard tegra_defconfig : passed 1:02.22 seaboard multi_v7_defconfig : passed 1:10.11 snow exynos_defconfig : passed 1:25.43 snowball u8500_defconfig : passed 1:31.68 snowball multi_v7_defconfig : passed 2:10.20 trimslice tegra_defconfig : passed 1:06.64 trimslice multi_v7_defconfig : passed 1:11.62 wandboard imx_v6_v7_defconfig : passed 0:53.08 wandboard multi_v7_defconfig : passed 1:05.70 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:31.53 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-7333-g59ecc26/multi_lpae_defconfig/zImage tftp 0x82000000 mainline/v3.14-7333-g59ecc26/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-7333-g59ecc26/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################# 2.8 MiB/s done Bytes transferred = 4521936 (44ffd0 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-7333-g59ecc26/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-7333-g59ecc26/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-7333-g59ecc26/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 1.2 MiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x44ffd0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-7333-g59ecc26/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.14-7333-g59ecc26/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-7333-g59ecc26/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.8 MiB/s done Bytes transferred = 4497680 (44a110 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-7333-g59ecc26/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-7333-g59ecc26/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-7333-g59ecc26/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 738.3 KiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x44a110 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-tegra_defconfig failure log: ------------------------------------------------- [ 1.073278] avdd-usb: 3300 mV [ 1.075245] avdd-usb: supplied by vdd-sys-5v0 [ 1.081478] rail-3v3: no parameters [ 1.085429] rail-5v0: no parameters [ 1.088999] REGEN3: no parameters [ 1.091921] SYSEN1: no parameters [ 1.095405] SYSEN2: no parameters [ 1.100686] Linux video capture interface: v2.00 [ 1.107208] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 1.114176] Advanced Linux Sound Architecture Driver Initialized. [ 1.124032] Bluetooth: Core ver 2.19 [ 1.126137] NET: Registered protocol family 31 [ 1.130313] Bluetooth: HCI device and connection manager initialized [ 1.136835] Bluetooth: HCI socket layer initialized [ 1.141720] Bluetooth: L2CAP socket layer initialized [ 1.147040] Bluetooth: SCO socket layer initialized [ 1.154317] cfg80211: Calling CRDA to update world regulatory domain [ 1.161069] Switched to clocksource arch_sys_counter [ 1.249656] NET: Registered protocol family 2 [ 1.256107] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.261786] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.268487] TCP: Hash tables configured (established 8192 bind 8192) [ 1.275954] TCP: reno registered [ 1.277581] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.283736] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.291322] NET: Registered protocol family 1 [ 1.296972] RPC: Registered named UNIX socket transport module. [ 1.301158] RPC: Registered udp transport module. [ 1.305857] RPC: Registered tcp transport module. [ 1.310624] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.317195] PCI: CLS 0 bytes, default 64 [ 1.337378] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.346514] bounce pool size: 64 pages [ 1.354166] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.361320] msgmni has been set to 1468 [ 1.369707] io scheduler noop registered (default) [ 1.402229] tegra114-pinctrl 70000868.pinmux: Config param 000e not supported on group drive_gma [ 1.409229] tegra114-pinctrl 70000868.pinmux: pin_config_group_set op failed for group 199 [ 1.417604] tegra114-pinctrl 70000868.pinmux: Error applying setting, re~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.618774] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.625549] usbcore: registered new interface driver usbhid [ 1.631439] usbhid: USB HID core driver [ 1.638793] TCP: cubic registered [ 1.642333] NET: Registered protocol family 17 [ 1.647186] Key type dns_resolver registered [ 1.652130] Power Management for TI OMAP4+ devices. [ 1.657318] Power Management for TI OMAP4. [ 1.661621] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.669006] Registering SWP/SWPB emulation handler [ 1.674743] vwl1271: 1800 mV [ 1.679290] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.689208] twl 0-0048: PIH (irq 39) nested IRQs [ 1.694854] twl_rtc rtc.11: Power up reset detected. [ 1.700714] twl_rtc rtc.11: Enabling TWL-RTC [ 1.707519] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.714508] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.720642] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.726745] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.732849] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.738372] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.743804] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.749023] VDAC: 1800 mV [ 1.749023] VANA: 2100 mV [ 1.756072] VCXIO: 1800 mV [ 1.756072] VUSB: 3300 mV [ 1.762969] V1V8: 1800 mV [ 1.766540] V2V1: 2100 mV [ 1.772369] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.897583] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.052001] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.052886] hub 1-1:1.0: USB hub found [ 2.052978] hub 1-1:1.0: 5 ports detected [ 2.095062] gic_timer_retrigger: lost localtimer interrupt [ 2.357116] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.407531] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.497100] smsc95xx v1.0.4 [ 2.589477] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 76:59:1e:48:80:90 ~$off # PYBOOT: Exception: timeout

11 years

mainline build: 8 warnings 0 failures (mainline/v3.14-7333-g59ecc26)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 59ecc26 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-7333-g59ecc26/ Runtime: 42m 16s Passed: 123 Failed: 0 Warnings: 8 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mfd/sec-core.c:342:45: warning: 'regmap_rtc' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 net/netfilter/xt_connlimit.c:380:45: warning: division by zero [-Wdiv-by-zero] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

11 years

next boot: 48 pass, 0 fail (next-20140403)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140403 Full Report =========== omap2plus_defconfig ------------------- legacy,3730xm 0 min 50.1 sec: PASS am335x-boneblack 0 min 25.4 sec: PASS omap3-beagle-xm 0 min 58.6 sec: PASS legacy,3530beagle 0 min 34.0 sec: PASS (Warnings: 1) omap4-panda 1 min 7.2 sec: PASS omap3-overo-tobi 0 min 23.4 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 25.1 sec: PASS omap5-uevm 0 min 59.4 sec: PASS (Warnings: 1) omap4-panda-es 1 min 8.8 sec: PASS legacy,3730storm 0 min 23.5 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 31.4 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.2 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS imx6q-wandboard 0 min 17.1 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 17.8 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.9 sec: PASS mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 0 min 22.7 sec: PASS armada-370-mirabox 0 min 20.2 sec: PASS exynos_defconfig ---------------- exynos5420-arndale-octa 0 min 31.9 sec: PASS exynos5250-arndale 0 min 28.8 sec: PASS multi_v7_defconfig ------------------ qcom-apq8074-dragonboard 0 min 17.3 sec: PASS ste-snowball 1 min 21.8 sec: PASS tegra30-beaver 0 min 25.1 sec: PASS am335x-boneblack 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 48.0 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS omap4-panda 0 min 55.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 19.2 sec: PASS bcm28155-ap 0 min 26.6 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 31.7 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS omap5-uevm 1 min 40.3 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.9 sec: PASS omap4-panda-es 0 min 56.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.3 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 30.2 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.6 sec: PASS da850-evm 0 min 16.4 sec: PASS

11 years

OMAP baseline test results for v3.14

by Paul Walmsley

Here are some basic OMAP test results for Linux v3.14. Logs and other details at: http://www.pwsan.com/omap/testlogs/test_v3.14/20140402004448/ Test summary ------------ Build: uImage: Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only, omap1_defconfig_5912osk_only Build: uImage+dtb: Pass ( 9/ 9): omap2plus_defconfig_am33xx_only/am335x-bone, omap2plus_defconfig/omap4-panda, omap2plus_defconfig/omap4-panda-es, omap2plus_defconfig/am3517-evm, omap2plus_defconfig/omap2430-sdp, omap2plus_defconfig/omap3-beagle, omap2plus_defconfig/omap3-beagle-xm, omap2plus_defconfig/omap3-evm-37xx, omap2plus_defconfig/omap4-var-som Build: zImage: Pass (14/14): multi_v7_defconfig, omap2plus_defconfig, omap2plus_defconfig_am33xx_only, omap2plus_defconfig_2430sdp_only, omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm, omap2plus_defconfig_n800_only_a, omap2plus_defconfig_n800_multi_omap2xxx, omap2plus_defconfig_omap2_4_only, omap2plus_defconfig_omap3_4_only, rmk_omap3430_ldp_allnoconfig, rmk_omap3430_ldp_oldconfig, rmk_omap4430_sdp_allnoconfig, rmk_omap4430_sdp_oldconfig Boot to userspace: FAIL ( 1/12): 2430sdp skip ( 2/12): 5912osk, cmt3517 Pass ( 9/12): 3517evm, 3530es3beagle, 3730beaglexm, 37xxevm, 4430es2panda, 4460pandaes, am335xbone, am335xbonelt, 4460varsomom PM: chip retention via suspend: FAIL ( 3/ 7): 2430sdp, 4430es2panda, 4460varsomom Pass ( 4/ 7): 3530es3beagle, 3730beaglexm, 37xxevm, 4460pandaes PM: chip retention via dynamic idle: FAIL ( 7/ 7): 2430sdp, 3530es3beagle, 3730beaglexm, 37xxevm, 4430es2panda, 4460pandaes, 4460varsomom PM: chip off except CORE via suspend: FAIL ( 1/ 1): 3730beaglexm PM: chip off except CORE via dynamic idle: FAIL ( 1/ 1): 3730beaglexm PM: chip off via suspend: FAIL ( 5/ 5): 3530es3beagle, 37xxevm, 4430es2panda, 4460pandaes, 4460varsomom PM: chip off via dynamic idle: FAIL ( 5/ 5): 3530es3beagle, 37xxevm, 4430es2panda, 4460pandaes, 4460varsomom vmlinux object size (delta in bytes from test_v3.14-rc8 (b098d6726bbfb94c06d6e1097466187afddae61f)): text data bss total kernel +1160 +88 +8 +1256 omap1_defconfig +1160 +88 +8 +1256 omap1_defconfig_1510innovator_only +1128 +88 +8 +1224 omap1_defconfig_5912osk_only +520 +136 0 +656 multi_v7_defconfig +720 +64 0 +784 omap2plus_defconfig +592 +96 +32 +720 omap2plus_defconfig_2430sdp_only +676 +56 0 +732 omap2plus_defconfig_am33xx_only +648 +72 0 +720 omap2plus_defconfig_am43xx_only +720 +128 0 +848 omap2plus_defconfig_cpupm +720 +64 0 +784 omap2plus_defconfig_dra7xx_only +416 +88 0 +504 omap2plus_defconfig_n800_multi_omap2xxx +384 +24 0 +408 omap2plus_defconfig_n800_only_a +656 +72 0 +728 omap2plus_defconfig_no_pm +656 +72 0 +728 omap2plus_defconfig_omap2_4_only +720 +64 0 +784 omap2plus_defconfig_omap3_4_only +656 +64 0 +720 omap2plus_defconfig_omap5_only +424 +72 -100 +396 rmk_omap3430_ldp_allnoconfig +480 +88 0 +568 rmk_omap3430_ldp_oldconfig +464 +76 -108 +432 rmk_omap4430_sdp_allnoconfig +480 +56 0 +536 rmk_omap4430_sdp_oldconfig Boot-time memory difference (delta in bytes from test_v3.14-rc8 (b098d6726bbfb94c06d6e1097466187afddae61f)) avail rsrvd high freed board kconfig (no differences)

11 years

mainline boot: 48 pass, 0 fail (v3.14-7247-gcd6362be)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-7247-gcd6362be Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm 0 min 15.2 sec: PASS (Warnings: 1) legacy,da850evm 0 min 14.5 sec: PASS (Warnings: 1) omap2plus_defconfig ------------------- legacy,3730xm 0 min 54.1 sec: PASS am335x-boneblack 0 min 25.6 sec: PASS omap3-beagle-xm 1 min 0.7 sec: PASS legacy,3530beagle 0 min 35.9 sec: PASS (Warnings: 1) omap4-panda 1 min 10.4 sec: PASS omap3-overo-tobi 0 min 23.2 sec: PASS (Warnings: 1) am335x-bone 0 min 27.7 sec: PASS omap3-overo-storm-tobi 0 min 22.4 sec: PASS omap5-uevm 1 min 7.4 sec: PASS (Warnings: 1) omap4-panda-es 1 min 8.3 sec: PASS legacy,3730storm 0 min 23.9 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (Warnings: 1) multi_lpae_defconfig -------------------- omap5-uevm 1 min 45.9 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 14.4 sec: PASS tegra_defconfig --------------- tegra30-beaver 0 min 17.2 sec: PASS imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual 0 min 18.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.0 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS msm_defconfig ------------- qcom-apq8074-dragonboard 0 min 15.2 sec: PASS bcm_defconfig ------------- bcm28155-ap 0 min 23.4 sec: PASS sunxi_defconfig --------------- sun7i-a20-cubieboard2 0 min 13.3 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos_defconfig ---------------- exynos5250-arndale 0 min 29.5 sec: PASS multi_v7_defconfig ------------------ ste-snowball 1 min 17.5 sec: PASS tegra30-beaver 0 min 22.0 sec: PASS am335x-boneblack 0 min 23.7 sec: PASS omap3-beagle-xm 0 min 51.0 sec: PASS sun7i-a20-cubieboard2 0 min 14.5 sec: PASS armada-370-mirabox 0 min 22.1 sec: PASS omap4-panda 0 min 52.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS sun4i-a10-cubieboard 0 min 38.4 sec: PASS bcm28155-ap 0 min 26.4 sec: PASS omap3-overo-tobi 0 min 21.9 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.2 sec: PASS omap3-overo-storm-tobi 0 min 21.3 sec: PASS omap5-uevm 1 min 49.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.4 sec: PASS omap4-panda-es 1 min 0.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.3 sec: PASS u8500_defconfig --------------- ste-snowball 0 min 32.4 sec: PASS sama5_defconfig --------------- sama5d35ek 0 min 17.2 sec: PASS davinci_all_defconfig --------------------- legacy,dm365evm 0 min 17.2 sec: PASS mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS

11 years

mainline boot: 27 passed 4 failed (mainline/v3.14-7247-gcd6362be)

by Olof's autobooter

Failed boards: dalmore tegra_defconfig : FAILED 1:28.58 dalmore multi_v7_defconfig : FAILED 1:04.87 dalmore multi_lpae_defconfig : FAILED 1:18.64 panda multi_v7_defconfig : FAILED 3:09.36 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.61 arndale exynos_defconfig : passed 1:02.81 bbb omap2plus_defconfig : passed 1:31.16 beaver tegra_defconfig : passed 0:49.23 beaver multi_v7_defconfig : passed 0:49.35 capri bcm_defconfig : passed 0:41.26 capri multi_v7_defconfig : passed 0:44.34 cubie sunxi_defconfig : passed 1:04.64 cubie multi_v7_defconfig : passed 1:09.61 cubie2 sunxi_defconfig : passed 1:03.87 cubie2 multi_v7_defconfig : passed 1:04.66 cubie2 multi_lpae_defconfig : passed 1:00.23 cubox dove_defconfig : passed 0:56.87 hummingboard imx_v6_v7_defconfig : passed 1:13.80 hummingboard multi_v7_defconfig : passed 1:06.92 omap5uevm multi_v7_defconfig : warnings 1:37.07 omap5uevm multi_lpae_defconfig : warnings 1:36.52 panda omap2plus_defconfig : passed 1:14.36 sama5 sama5_defconfig : passed 1:56.29 seaboard multi_v7_defconfig : passed 1:07.82 snow exynos_defconfig : passed 1:23.49 snowball u8500_defconfig : passed 1:22.15 snowball multi_v7_defconfig : passed 2:05.64 trimslice tegra_defconfig : passed 1:00.74 trimslice multi_v7_defconfig : passed 1:12.47 wandboard imx_v6_v7_defconfig : passed 0:59.05 wandboard multi_v7_defconfig : passed 1:04.46 Offline boards: bbb multi_v7_defconfig : OFFLINE 1:04.45 omap5uevm omap2plus_defconfig : OFFLINE 2:09.92 seaboard tegra_defconfig : OFFLINE 0:43.92 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-7247-gcd6362be/multi_lpae_defconfig/zImage tftp 0x82000000 mainline/v3.14-7247-gcd6362be/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-7247-gcd6362be/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *######################T ###################################T ######## ################################################################# ################################################################# ################################################################# ################################################# 293 KiB/s done Bytes transferred = 4525136 (450c50 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-7247-gcd6362be/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-7247-gcd6362be/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-7247-gcd6362be/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 573.2 KiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x450c50 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.14-7247-gcd6362be/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.14-7247-gcd6362be/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-7247-gcd6362be/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.9 MiB/s done Bytes transferred = 4501752 (44b0f8 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.14-7247-gcd6362be/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.14-7247-gcd6362be/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.134 Filename 'mainline/v3.14-7247-gcd6362be/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 1.4 MiB/s done Bytes transferred = 34059 (850b hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x44b0f8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff50a ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-tegra_defconfig failure log: ------------------------------------------------- [ 1.078889] avdd-usb: 3300 mV [ 1.080860] avdd-usb: supplied by vdd-sys-5v0 [ 1.087070] rail-3v3: no parameters [ 1.091034] rail-5v0: no parameters [ 1.094617] REGEN3: no parameters [ 1.097550] SYSEN1: no parameters [ 1.100994] SYSEN2: no parameters [ 1.106325] Linux video capture interface: v2.00 [ 1.112863] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 1.119837] Advanced Linux Sound Architecture Driver Initialized. [ 1.129761] Bluetooth: Core ver 2.19 [ 1.131809] NET: Registered protocol family 31 [ 1.136046] Bluetooth: HCI device and connection manager initialized [ 1.142573] Bluetooth: HCI socket layer initialized [ 1.147451] Bluetooth: L2CAP socket layer initialized [ 1.152768] Bluetooth: SCO socket layer initialized [ 1.160022] cfg80211: Calling CRDA to update world regulatory domain [ 1.166853] Switched to clocksource arch_sys_counter [ 1.255287] NET: Registered protocol family 2 [ 1.261754] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.267472] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.274136] TCP: Hash tables configured (established 8192 bind 8192) [ 1.281616] TCP: reno registered [ 1.283226] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.289382] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.296947] NET: Registered protocol family 1 [ 1.302470] RPC: Registered named UNIX socket transport module. [ 1.306596] RPC: Registered udp transport module. [ 1.311539] RPC: Registered tcp transport module. [ 1.316129] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.322696] PCI: CLS 0 bytes, default 64 [ 1.343307] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.352500] bounce pool size: 64 pages [ 1.360274] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.367242] msgmni has been set to 1468 [ 1.375816] io scheduler noop registered (default) [ 1.408047] tegra114-pinctrl 70000868.pinmux: Config param 000e not supported on group drive_gma [ 1.415044] tegra114-pinctrl 70000868.pinmux: pin_config_group_set op failed for group 199 [ 1.423415] tegra114-pinctrl 70000868.pinmux: Error applying setting, ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.084350] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.093811] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.110382] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.117706] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.117706] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.134399] mmc1: new SDIO card at address 0001 [ 3.148406] devtmpfs: mounted [ 3.151550] Freeing unused kernel memory: 520K (c082e000 - c08b0000) INIT: version 2.88 booting [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 3.881958] udevd[175]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 5.238159] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 7.056945] random: nonblocking pool is initialized [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 8.029479] gic_timer_retrigger: lost localtimer interrupt [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 8.454925] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup Listening on LPF/eth0/3e:75:7d:f5:5c:ca Sending on LPF/eth0/3e:75:7d:f5:5c:ca Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 10.077148] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 12.180938] gic_timer_retrigger: lost localtimer interrupt ~$off # PYBOOT: Exception: timeout

11 years

mainline build: 8 warnings 0 failures (mainline/v3.14-7247-gcd6362be)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: cd6362be Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-7247-gcd6362be/ Runtime: 42m 14s Passed: 123 Failed: 0 Warnings: 8 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mfd/sec-core.c:342:45: warning: 'regmap_rtc' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 net/netfilter/xt_connlimit.c:380:45: warning: division by zero [-Wdiv-by-zero] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

11 years

next boot: 23 passed 9 failed (next/next-20140403)

by Olof's autobooter

Failed boards: apc vt8500_v6_v7_defconfig : FAILED 1:14.03 cubie multi_v7_defconfig : FAILED 1:04.61 cubie2 sunxi_defconfig : FAILED 1:20.74 cubie2 multi_v7_defconfig : FAILED 1:11.98 cubie2 multi_lpae_defconfig : FAILED 0:59.31 hummingboard multi_v7_defconfig : FAILED 1:04.48 panda multi_v7_defconfig : FAILED 1:34.18 snowball multi_v7_defconfig : FAILED 1:10.48 wandboard multi_v7_defconfig : FAILED 1:09.05 Successful boards: arndale exynos_defconfig : passed 1:18.88 bbb omap2plus_defconfig : passed 1:36.69 bbb multi_v7_defconfig : passed 1:21.46 beaver tegra_defconfig : passed 0:55.65 beaver multi_v7_defconfig : passed 0:49.45 capri bcm_defconfig : passed 0:43.06 capri multi_v7_defconfig : passed 0:44.45 cubie sunxi_defconfig : passed 1:12.58 dalmore tegra_defconfig : passed 1:20.39 dalmore multi_v7_defconfig : passed 1:18.60 dalmore multi_lpae_defconfig : passed 1:20.56 hummingboard imx_v6_v7_defconfig : passed 1:20.93 omap5uevm multi_v7_defconfig : warnings 1:40.25 omap5uevm multi_lpae_defconfig : warnings 1:38.88 panda omap2plus_defconfig : warnings 1:15.02 sama5 sama5_defconfig : passed 1:49.77 seaboard tegra_defconfig : passed 0:59.96 seaboard multi_v7_defconfig : passed 1:09.38 snow exynos_defconfig : passed 1:32.18 snowball u8500_defconfig : passed 1:16.94 trimslice tegra_defconfig : passed 0:57.53 trimslice multi_v7_defconfig : passed 1:05.95 wandboard imx_v6_v7_defconfig : passed 0:56.79 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:21.82 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board apc-vt8500_v6_v7_defconfig failure log: ------------------------------------------------- WMT # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 WMT # tftp 0x1000000 tmp/apc-JnR_kN/tmpxpnK4B-uImage tftp 0x1000000 tmp/apc-JnR_kN/tmpxpnK4B-uImage TFTP from server 172.16.1.3; our IP address is 172.16.1.104 Filename 'tmp/apc-JnR_kN/tmpxpnK4B-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################### done Bytes transferred = 2427734 (250b56 hex) WMT # setenv bootargs console=ttyWMT0,115200n8 earlyprintk debug root=/dev/sda1 rootwait rw setenv bootargs console=ttyWMT,115200n8 earlyprintk debug root=/dev/sda1 rootwait rw WMT # printenv bootargs printenv bootargs bootargs=console=ttyWMT,115200n8 earlyprintk debug root=/dev/sda1 rootwait rw WMT # bootm 0x1000000 bootm 0x1000000 ## Booting image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2427670 Bytes = 2.3 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Debian GNU/Linux 7 apc ttyWMT0 apc login: ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140403/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140403/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 2.8 MiB/s done Bytes transferred = 4642056 (46d508 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 next/next-20140403/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 next/next-20140403/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.145 Filename 'next/next-20140403/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *## 706.1 KiB/s done Bytes transferred = 15184 (3b50 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x46d508 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffb4f ... OK Starting kernel ... node: cubie status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 next/next-20140403/multi_lpae_defconfig/zImage tftp 0x40008000 next/next-20140403/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140403/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 3.9 MiB/s done Bytes transferred = 4668680 (473d08 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140403/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140403/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140403/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 1 MiB/s done Bytes transferred = 18361 (47b9 hex) sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x473d08 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff7b8 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x40008000 next/next-20140403/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140403/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 4 MiB/s done Bytes transferred = 4642056 (46d508 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 next/next-20140403/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 next/next-20140403/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.161 Filename 'next/next-20140403/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 1 MiB/s done Bytes transferred = 18361 (47b9 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x46d508 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff8000, end 40fff7b8 ... OK Starting kernel ... node: cubie2 status: on ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017713] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017738] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017750] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017769] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017782] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018730] Switched to clocksource arch_sys_counter [ 0.025824] NET: Registered protocol family 2 [ 0.026285] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026375] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026496] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026582] TCP: reno registered [ 0.026596] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026852] NET: Registered protocol family 1 [ 0.027246] RPC: Registered named UNIX socket transport module. [ 0.027257] RPC: Registered udp transport module. [ 0.027263] RPC: Registered tcp transport module. [ 0.027271] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028223] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028702] bounce pool size: 64 pages [ 0.036543] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036562] io scheduler noop registered [ 0.036569] io scheduler deadline registered [ 0.036752] io scheduler cfq registered (default) [ 0.038396] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080370] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082783] console [ttyS0] disabled [ 0.102988] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.617965] console [ttyS0] enabled [ 0.622695] mousedev: PS/2 mouse device common for all mice [ 0.628522] i2c /dev entries driver [ 0.633415] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642417] TCP: cubic registered [ 0.645737] NET: Registered protocol family 17 [ 0.650301] Registering SWP/SWPB emulation handler [ 0.656013] ahci-5v: 5000 mV [ 0.659307] usb1-vbus: 5000 mV [ 0.662669] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- C1 U-Boot > tftp 0x10800000 next/next-20140403/multi_v7_defconfig/zImage tftp 0x10800000 next/next-20140403/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.163 Filename 'next/next-20140403/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 1.9 MiB/s done Bytes transferred = 4642056 (46d508 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 next/next-20140403/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 next/next-20140403/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.163 Filename 'next/next-20140403/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 667 KiB/s done Bytes transferred = 25988 (6584 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46d508 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009583 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.654052] usbcore: registered new interface driver usbhid [ 1.659912] usbhid: USB HID core driver [ 1.667907] TCP: cubic registered [ 1.671417] NET: Registered protocol family 17 [ 1.676239] Key type dns_resolver registered [ 1.681182] Power Management for TI OMAP4+ devices. [ 1.686340] Power Management for TI OMAP4. [ 1.690673] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.698059] Registering SWP/SWPB emulation handler [ 1.703796] vwl1271: 1800 mV [ 1.708435] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.718139] twl 0-0048: PIH (irq 39) nested IRQs [ 1.723785] twl_rtc rtc.15: Power up reset detected. [ 1.729736] twl_rtc rtc.15: Enabling TWL-RTC [ 1.736694] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.743682] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.749755] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.755828] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.761901] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.767425] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.772949] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.778381] VDAC: 1800 mV [ 1.781219] VANA: 2100 mV [ 1.785247] VCXIO: 1800 mV [ 1.785247] VUSB: 3300 mV [ 1.792236] V1V8: 1800 mV [ 1.795806] V2V1: 2100 mV [ 1.879455] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.999877] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.007354] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.016265] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.023681] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.031585] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.047454] hub 1-1:1.0: USB hub found [ 2.051696] hub 1-1:1.0: 5 ports detected [ 2.424591] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.578094] smsc95xx v1.0.4 [ 4.161346] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 9a:27:46:84:c4:6d ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.129 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-uP10Ql/tmpXgMSMB-uImage tftp 0x00100000 tmp/snowball-uP10Ql/tmpXgMSMB-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'tmp/snowball-uP10Ql/tmpXgMSMB-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4683369 (477669 hex) U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4683305 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 next/next-20140403/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140403/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 6.1 MiB/s done Bytes transferred = 4642056 (46d508 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 next/next-20140403/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 next/next-20140403/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.162 Filename 'next/next-20140403/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 926.8 KiB/s done Bytes transferred = 29426 (72f2 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46d508 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a2f1 Starting kernel ... node: wandboard status: on ~$off # PYBOOT: Exception: timeout

11 years

next build: 12 warnings 0 failures (next/next-20140403)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 4b22efd Add linux-next specific files for 20140403 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140403/ Runtime: 43m 4s Passed: 124 Failed: 0 Warnings: 12 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 1 include/linux/kernel.h:54:38: warning: division by zero [-Wdiv-by-zero] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

11 years, 1 month

← Newer
1
...
24
25
26
27
28
29
30
31
32
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports April 2014