January 2014 - Kernel-build-reports

mainline boot: 5 passed 20 failed (mainline/v3.13-8988-gd891ea2)

by Olof's autobooter

Failed boards: arndale exynos_defconfig : FAILED 1:25.26 beaver tegra_defconfig : BUILD FAILED beaver multi_v7_defconfig : FAILED 1:04.64 capri multi_v7_defconfig : FAILED 1:02.61 cubie sunxi_defconfig : FAILED 1:03.20 cubie multi_v7_defconfig : FAILED 1:05.32 cubie2 sunxi_defconfig : FAILED 1:01.23 cubie2 multi_v7_defconfig : FAILED 1:03.20 cubie2 multi_lpae_defconfig : FAILED 0:58.71 cubox dove_defconfig : FAILED 1:06.92 dalmore tegra_defconfig : BUILD FAILED dalmore multi_v7_defconfig : FAILED 1:06.57 dalmore multi_lpae_defconfig : FAILED 1:04.68 panda omap2plus_defconfig : FAILED 1:13.31 panda multi_v7_defconfig : FAILED 1:14.34 seaboard tegra_defconfig : BUILD FAILED seaboard multi_v7_defconfig : FAILED 1:08.82 snow exynos_defconfig : FAILED 1:11.19 snowball u8500_defconfig : FAILED 1:17.84 snowball multi_v7_defconfig : FAILED 1:05.69 trimslice tegra_defconfig : BUILD FAILED trimslice multi_v7_defconfig : FAILED 1:06.67 wandboard imx_v6_v7_defconfig : FAILED 1:02.74 wandboard multi_v7_defconfig : FAILED 1:07.99 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.99 bbb omap2plus_defconfig : warnings 1:37.96 bbb multi_v7_defconfig : passed 1:18.90 capri bcm_defconfig : passed 0:42.68 sama5 sama5_defconfig : passed 1:53.95 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board arndale-exynos_defconfig failure log: ------------------------------------------------- Load address: 0x40800000 Loading: *################################################################# ################################################################# ########################################################## done Bytes transferred = 2756168 (2a0e48 hex) ARNDALE5250 # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 ARNDALE5250 #tftp 0x407c0000 mainline/v3.13-8988-gd891ea2/exynos_defconfig/dtbs/exynos5250-arndale.dtb tftp 0x407c0000 mainline/v3.13-8988-gd891ea2/exynos_defconfig/dtbs/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.176 Filename 'mainline/v3.13-8988-gd891ea2/exynos_defconfig/dtbs/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33440 (82a0 hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw ARNDALE5250 # bootm 0x40800000 - 0x407c0000 bootm 0x40800000 - 0x407c0000 ## Booting kernel from Legacy Image at 40800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2756104 Bytes = 2.6 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff4000, end 4ffff29f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x82000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3676392 (3818e8 hex) Tegra30 (Beaver) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x83000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/tegra30-beaver.dtb tftp 0x83000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 664.1 KiB/s done Bytes transferred = 23808 (5d00 hex) Tegra30 (Beaver) #printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff7000, end 8ffffcff ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- (user:build) Load fastboot kernel GET_DESC ->STRING DESC sending 'kernel' (3590 KB)... ................................................................................ ................................OKAY [ 0.772s] writing 'kernel'... downloading of 3676392 bytes finished Flashing Raw Image Writing to partition 'kernel' WritinOKAY [ 0.275s] finished. total time: 1.047s g 'kernel' DONE! GET_DESC ->STRING DESC sending 'device-tree' (2 KB)... OKAY [ 0.003s] writing 'device-tree'... downloading of 2862 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'dOKAY [ 0.011s] finished. total time: 0.014s evice-tree' DONE! GET_DESC ->STRING DESC resuming boot... MMC read: dev # 0, bloOKAY [ 0.004s] finished. total time: 0.004s ck # 72320, count 16384 ... 16384 blocks read: OK MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e003b2d Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- sun4i#tftp 0x40008000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage tftp 0x40008000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3676392 (3818e8 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/sun4i-a10node: cubie status: on -cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 504.9 KiB/s done Bytes transferred = 10869 (2a75 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.154 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 mainline/v3.13-8988-gd891ea2/sunxi_defconfig/zImage tftp 0x40008000 mainline/v3.13-8988-gd891ea2/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-8988-gd891ea2/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1767720 (1af928 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 mainline/v3.13-8988-gd891ea2/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 mainline/v3.13-8988-gd891ea2/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-8988-gd891ea2/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 341.8 KiB/s done Bytes transferred = 10869 (2a75 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- .3 sun7i# tftp 0x40008000 mainline/v3.13-8988-gd891ea2/multi_lpae_defconfig/zImage tftp 0x40008000 mainline/v3.13-8988-gd891ea2/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8988-gd891ea2/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ######################################################### 3.8 MiB/s done Bytes transferred = 3696552 (3867a8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 mainline/v3.13-8988-gd891ea2/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 mainline/v3.13-8988-gd891ea2/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8988-gd891ea2/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 2.9 MiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x3867a8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage tftp 0x40008000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 4 MiB/s done Bytes transferred = 3676392 (3818e8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 2.9 MiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x410node: cubie2 status: on 00000 Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.171 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x40008000 mainline/v3.13-8988-gd891ea2/sunxi_defconfig/zImage tftp 0x40008000 mainline/v3.13-8988-gd891ea2/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8988-gd891ea2/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 4 MiB/s done Bytes transferred = 1767720 (1af928 hex) sun7i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 mainline/v3.13-8988-gd891ea2/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 mainline/v3.13-8988-gd891ea2/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8988-gd891ea2/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 745.1 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-dove_defconfig failure log: ------------------------------------------------- CuBox>> dhcp dhcpnode: cubox status: on Unknown command 'dhcp' - try 'help' CuBox>> setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 CuBox>>tftp 0x02000000 tmp/cubox-5PNuec/tmpxObydC-uImage tftp 0x02000000 tmp/cubox-5PNuec/tmpxObydC-uImage Using egiga0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.183 Filename 'tmp/cubox-5PNuec/tmpxObydC-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ############################################################## done Bytes transferred = 2805351 (2ace67 hex) CuBox>> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk CuBox>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk CuBox>> bootm 0x02000000 bootm 0x02000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-01-28 19:38:07 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2805287 Bytes = 2.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-8988-gd891ea2/multi_lpae_defconfig/zImage tftp 0x82000000 mainline/v3.13-8988-gd891ea2/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-8988-gd891ea2/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ######################################################### 2.8 MiB/s done Bytes transferred = 3696552 (3867a8 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-8988-gd891ea2/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.13-8988-gd891ea2/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-8988-gd891ea2/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34015 (84df hex) Tegra114 (Dalmore) #printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x3867a8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff4de ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3676392 (3818e8 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 706.1 KiB/s done Bytes transferred = 34015 (84df hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff4de ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- Loading: *################################################################# ################################################################# ################################################################# ######################################################## done Bytes transferred = 3676456 (381928 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *## done Bytes transferred = 20856 (5178 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3676392 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f08177 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-omap2plus_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################ done Bytes transferred = 4275504 (413d30 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 mainline/v3.13-8988-gd891ea2/omap2plus_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 mainline/v3.13-8988-gd891ea2/omap2plus_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'mainline/v3.13-8988-gd891ea2/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *## done Bytes transferred = 20856 (5178 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4275440 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f08177 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra20 (SeaBoard) # tftp 0x800000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage tftp 0x800000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.6 MiB/s done Bytes transferred = 3676392 (3818e8 hex) Tegra20 (SeaBoard) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (SeaBoard) # tftp 0x1800000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb tftp 0x1800000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb'. Load address: 0x1800000 Loading: *## 364.3 KiB/s done Bytes transferred = 25391 (632f hex) Tegra20 (SeaBoard) # printenv bootargs printenv bootargs bootargs=root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk Tegra20 (SeaBoard) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff6000, end 0ffff32e ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-exynos_defconfig failure log: ------------------------------------------------- OK Loading Device Tree to 5fff0000, end 5ffff7f8 ... OK Starting kernel ... Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 1,698,406 1,598,406 board_init_f 1,748,136 49,730 board_init_r 1,750,346 2,210 board_init 1,881,259 130,913 board_init_done 1,963,558 82,299 id=64 1,968,989 5,431 main_loop 3,973,064 2,004,075 usb_start 8,652,601 4,679,537 tftp_start 8,652,619 18 id=80 8,652,621 2 eth_start 12,437,289 3,784,668 id=81 12,437,374 85 id=82 12,437,379 5 id=84 12,437,380 1 tftp_done 19,773,347 7,335,967 bootm_start 19,773,354 7 id=1 19,853,160 79,806 id=2 19,853,179 19 id=3 20,633,550 780,371 id=4 20,633,552 2 id=5 20,633,563 11 id=6 21,355,404 721,841 id=7 21,355,407 3 id=8 21,355,421 14 id=15 21,924,033 568,612 start_kernel Accumulated time: 153,701 lcd Stashed 27 records ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- smc911x: MAC 08:00:08:1e:0f:44 BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.138 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-MypI1t/tmpPG2S3g-uImage tftp 0x00100000 tmp/snowball-MypI1t/tmpPG2S3g-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'tmp/snowball-MypI1t/tmpPG2S3g-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ########################################################## done Bytes transferred = 3711969 (38a3e1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3711905 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.138 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-89OP67/tmpUAHLNj-uImage tftp 0x00100000 tmp/snowball-89OP67/tmpUAHLNj-uImage smc911x: detected LAN9221 controller node: snowball status: on smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'tmp/snowball-89OP67/tmpUAHLNj-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ##### done Bytes transferred = 2934657 (2cc781 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2934593 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x800000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage tftp 0x800000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3676392 (3818e8 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 680.7 KiB/s done Bytes transferred = 20236 (4f0c hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffff0b ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 mainline/v3.13-8988-gd891ea2/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-8988-gd891ea2/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################ 5.7 MiB/s done Bytes transferred = 4999352 (4c48b8 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 mainline/v3.13-8988-gd891ea2/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.13-8988-gd891ea2/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-8988-gd891ea2/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1.4 MiB/s done Bytes transferred = 34380 (864c hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4c48b8 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- => tftp 0x10800000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 6.1 MiB/s done Bytes transferred = 3676392 (3818e8 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-8988-gd891ea2/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1.6 MiB/s done Bytes transferred = 34380 (864c hex) => printenv bootargs printenode: wandboard status: on nv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b Starting kernel ... ~$off # PYBOOT: Exception: timeout

11 years, 4 months

1
0
0 0

mainline build: 7 warnings 1 failures (mainline/v3.13-8988-gd891ea2)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: d891ea2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-8988-gd891ea2/ Runtime: 19m 46s Passed: 122 Failed: 1 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: tegra_defconfig ------------------------------------------------------------------------------- Errors: tegra_defconfig: drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] Warnings: 1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 4 months

1
0
0 0

mainline boot: 14 pass, 22 fail (v3.13-8905-g627f4b3)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-8905-g627f4b3 Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 0 min 54.7 sec am335x-bone PASS: 0 min 27.4 sec omap4-panda FAIL: 0 min 56.0 sec omap4-panda-es FAIL: 1 min 29.7 sec omap3-tobi,3730storm PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 22.8 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 19.4 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.8 sec imx6q-wandboard FAIL: 0 min 20.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 17.9 sec sun4i-a10-cubieboard FAIL: 0 min 18.8 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 4.1 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 31.4 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 32.2 sec tegra30-beaver FAIL: 0 min 24.0 sec am335x-boneblack PASS: 0 min 22.6 sec omap3-beagle-xm PASS: 0 min 55.3 sec sun7i-a20-cubieboard2 FAIL: 0 min 19.4 sec armada-370-mirabox FAIL: 0 min 31.6 sec omap4-panda FAIL: 0 min 56.5 sec omap4-panda-es FAIL: 1 min 17.5 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec sun4i-a10-cubieboard FAIL: 0 min 19.4 sec bcm28155-ap FAIL: 16 min 20.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone FAIL: 0 min 29.6 sec imx6q-wandboard FAIL: 0 min 20.6 sec omap3-tobi,3730storm PASS: 0 min 20.6 sec imx6dl-wandboard,wand-dual FAIL: 0 min 22.1 sec omap3-tobi,3530overo PASS: 0 min 21.1 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 28.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec armada-370-mirabox FAIL: 0 min 31.6 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- 2.9 KiB/s done Bytes transferred = 20616 (5088 hex) Panda #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f08087 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 55.97 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk vram=16M ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none nfsroot=192.168.1.2:/opt/kjh/rootfs/debian/armel,rsize=4096,wsize=4096 Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f08177 Starting kernel ... U-Boot SPL 2013.04 (May 24 2013 - 14:00:03) OMAP4460 ES1.1 ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 89.74 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x3867a8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.41 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Bytes transferred = 34380 (864c hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4c48b8 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.90 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 17.95 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.78 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- Connected to arndale console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(arndale console)> hardreset (user:khilman) Reboot arndale Reboot: arndale ; phidget 2 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- ################################################################# ########################################################## done Bytes transferred = 3711969 (38a3e1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3711905 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 32.24 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ Bytes transferred = 23808 (5d00 hex) Tegra30 (Beaver) #printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x3818e8 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008cff Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 23.97 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.41 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.58 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- 2.9 KiB/s done Bytes transferred = 20616 (5088 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f08087 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.47 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ 2.9 KiB/s done Bytes transferred = 20856 (5178 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk vram=16M ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none nfsroot=192.168.1.2:/opt/kjh/rootfs/debian/armel,rsize=4096,wsize=4096 Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f08177 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 77.53 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Connected to obsax3 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(obsax3 console)> hardreset (user:khilman) Reboot obsax3 Reboot: obsax3 ; ip9258 1 4 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.60 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.36 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 24 lines of boot log: --------------------------------------------- File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-01-28 06:30:19 PM INFO: CriticalError <LAVA_DISPATCHER>2014-01-28 06:30:19 PM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-01-28 06:30:19 PM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-01-28 06:30:19 PM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/b398346f88797608175cf3d7ca579f81… LBOOT: Result: FAIL LBOOT: Time: 980.56 seconds. am335x-bone: FAIL: last 24 lines of boot log: --------------------------------------------- bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.151:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19b000, end 8f237300 ... OK Using Device Tree in place at 81f00000, end 81f073a2 Starting kernel ... Connected. Connected. Disconnected. ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.58 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Bytes transferred = 34380 (864c hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x3818e8 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.61 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------ 1.5 MiB/s done Bytes transferred = 32741 (7fe5 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100afe4 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.10 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- ################################################################# ##### done Bytes transferred = 2934657 (2cc781 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2934593 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.39 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Connected to obsax3 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(obsax3 console)> hardreset (user:khilman) Reboot obsax3 Reboot: obsax3 ; ip9258 1 4 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.55 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Connected to mirabox console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(mirabox console)> hardreset (user:khilman) Reboot mirabox Reboot: mirabox ; ip9258 1 1 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.55 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

1
0
0 0

mainline boot: 5 passed 20 failed (mainline/v3.13-8905-g627f4b3)

by Olof's autobooter

Failed boards: arndale exynos_defconfig : FAILED 1:25.23 beaver tegra_defconfig : BUILD FAILED beaver multi_v7_defconfig : FAILED 1:04.72 capri multi_v7_defconfig : FAILED 1:02.58 cubie sunxi_defconfig : FAILED 1:03.06 cubie multi_v7_defconfig : FAILED 1:01.30 cubie2 sunxi_defconfig : FAILED 1:01.12 cubie2 multi_v7_defconfig : FAILED 1:03.54 cubie2 multi_lpae_defconfig : FAILED 0:58.72 cubox dove_defconfig : FAILED 1:11.42 dalmore tegra_defconfig : BUILD FAILED dalmore multi_v7_defconfig : FAILED 1:07.62 dalmore multi_lpae_defconfig : FAILED 1:04.64 panda omap2plus_defconfig : FAILED 1:12.76 panda multi_v7_defconfig : FAILED 1:15.92 seaboard tegra_defconfig : BUILD FAILED seaboard multi_v7_defconfig : FAILED 1:20.53 snow exynos_defconfig : FAILED 1:11.10 snowball u8500_defconfig : FAILED 1:14.74 snowball multi_v7_defconfig : FAILED 1:06.04 trimslice tegra_defconfig : BUILD FAILED trimslice multi_v7_defconfig : FAILED 1:10.53 wandboard imx_v6_v7_defconfig : FAILED 1:02.58 wandboard multi_v7_defconfig : FAILED 1:08.39 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.79 bbb omap2plus_defconfig : passed 1:37.34 bbb multi_v7_defconfig : passed 1:19.10 capri bcm_defconfig : passed 0:42.81 sama5 sama5_defconfig : passed 1:59.15 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board arndale-exynos_defconfig failure log: ------------------------------------------------- Load address: 0x40800000 Loading: *################################################################# ################################################################# ########################################################## done Bytes transferred = 2756176 (2a0e50 hex) ARNDALE5250 # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 ARNDALE5250 # tftp 0x407c0000 mainline/v3.13-8905-g627f4b3/exynos_defconfig/dtbs/exynos5250-arndale.dtb tftp 0x407c0000 mainline/v3.13-8905-g627f4b3/exynos_defconfig/dtbs/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.176 Filename 'mainline/v3.13-8905-g627f4b3/exynos_defconfig/dtbs/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33440 (82a0 hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw ARNDALE5250 # bootm 0x40800000 - 0x407c0000 bootm 0x40800000 - 0x407c0000 ## Booting kernel from Legacy Image at 40800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2756112 Bytes = 2.6 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff4000, end 4ffff29f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x82000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3676392 (3818e8 hex) Tegra30 (Beaver) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x83000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/tegra30-beaver.dtb tftp 0x83000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 800.8 KiB/s done Bytes transferred = 23808 (5d00 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff7000, end 8ffffcff ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- (user:build) Load fastboot kernel GET_DESC ->STRING DESC sending 'kernel' (3590 KB)... ................................................................................ ................................OKAY [ 0.774s] writing 'kernel'... downloading of 3676392 bytes finished Flashing Raw Image Writing to partition 'kernel' Writing 'OKAY [ 0.191s] finished. total time: 0.965s kernel' DONE! GET_DESC ->STRING DESC sending 'device-tree' (2 KB)... OKAY [ 0.001s] writing 'device-tree'... downloading of 2862 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'device-tree' DONOKAY [ 0.011s] finished. total time: 0.013s E! GET_DESC ->STRING DESC resuming boot... OKAY [ 0.001s] MMC read: dev # 0, bfinished. total time: 0.003s lock # 72320, count 16384 ... 16384 blocks read: OK MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e003b2d Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- sun4i#tftp 0x40008000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage tftp 0x40008000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# #################node: cubie status: on ################################################ ######################################################## 2.8 MiB/s done Bytes transferred = 3676392 (3818e8 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 408.2 KiB/s done Bytes transferred = 10869 (2a75 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.154 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 mainline/v3.13-8905-g627f4b3/sunxi_defconfig/zImage tftp 0x40008000 mainline/v3.13-8905-g627f4b3/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-8905-g627f4b3/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1767720 (1af928 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 mainline/v3.13-8905-g627f4b3/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 mainline/v3.13-8905-g627f4b3/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-8905-g627f4b3/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 964.8 KiB/s done Bytes transferred = 10869 (2a75 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 mainline/v3.13-8905-g627f4b3/multi_lpae_defconfig/zImage node: cubie2 status: on tftp 0x40008000 mainline/v3.13-8905-g627f4b3/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8905-g627f4b3/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ######################################################### 3.8 MiB/s done Bytes transferred = 3696552 (3867a8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 mainline/v3.13-8905-g627f4b3/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 mainline/v3.13-8905-g627f4b3/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8905-g627f4b3/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 662.1 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x3867a8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage tftp 0x40008000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 4 MiB/s done Bytes transferred = 3676392 (3818e8 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 127 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 -node: cubie2 status: on 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.171 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x40008000 mainline/v3.13-8905-g627f4b3/sunxi_defconfig/zImage tftp 0x40008000 mainline/v3.13-8905-g627f4b3/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8905-g627f4b3/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 4 MiB/s done Bytes transferred = 1767720 (1af928 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 mainline/v3.13-8905-g627f4b3/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 mainline/v3.13-8905-g627f4b3/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8905-g627f4b3/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 567.4 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-dove_defconfig failure log: ------------------------------------------------- CuBox>> dhcp dhcp Unknown command 'dhcp' - try 'help' CuBox>> setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 CuBox>> tftp 0x02000000 tmp/cubox-3ew1AW/tmphLoV4z-uImage tftp 0x02000000 tmp/cubox-3ew1AW/tmphLoV4z-uImage Using egiga0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.183 Filename 'tmp/cubox-3ew1AW/tmphLoV4z-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ############################################################## done Bytes transferred = 2805351 (2ace67 hex) CuBox>> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk CuBox>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk CuBox>> bootm 0x02000000 bootm 0x02000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-01-28 18:00:45 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2805287 Bytes = 2.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... node: cubox status: on OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-8905-g627f4b3/multi_lpae_defconfig/zImage tftp 0x82000000 mainline/v3.13-8905-g627f4b3/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-8905-g627f4b3/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ######################################################### 2.8 MiB/s done Bytes transferred = 3696552 (3867a8 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-8905-g627f4b3/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.13-8905-g627f4b3/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-8905-g627f4b3/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 1 MiB/s done Bytes transferred = 34015 (84df hex) Tegra114 (Dalmore) #printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x3867a8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff4de ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra114 (Dalmore) #tftp 0x82000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3676392 (3818e8 hex) Tegra114 (Dalmore) #setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) #tftp 0x83000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 1.2 MiB/s done Bytes transferred = 34015 (84df hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) #bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff4de ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- Loading: *################################################################# ################################################################# ################################################################# ######################################################## done Bytes transferred = 3676456 (381928 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *## done Bytes transferred = 20856 (5178 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3676392 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f08177 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-omap2plus_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################ done Bytes transferred = 4275504 (413d30 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 mainline/v3.13-8905-g627f4b3/omap2plus_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 mainline/v3.13-8905-g627f4b3/omap2plus_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'mainline/v3.13-8905-g627f4b3/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *## done Bytes transferred = 20856 (5178 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4275440 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f08177 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra20 (SeaBoard) # tftp 0x800000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage tftp 0x800000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 3.1 MiB/s done Bytes transferred = 3676392 (3818e8 hex) Tegra20 (SeaBoard) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (SeaBoard) # tftp 0x1800000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb tftp 0x1800000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb'. Load address: 0x1800000 Loading: *## 774.4 KiB/s done Bytes transferred = 25391 (632f hex) Tegra20 (SeaBoard) # printenv bootargs printenv bootargs bootargs=root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk Tegra20 (SeaBoard) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff6000, end 0ffff32e ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-exynos_defconfig failure log: ------------------------------------------------- OK Loading Device Tree to 5fff0000, end 5ffff7f8 ... OK Starting kernel ... Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 1,699,326 1,599,326 board_init_f 1,749,202 49,876 board_init_r 1,751,413 2,211 board_init 1,882,273 130,860 board_init_done 1,963,714 81,441 id=64 1,969,136 5,422 main_loop 3,914,214 1,945,078 usb_start 8,592,040 4,677,826 tftp_start 8,592,057 17 id=80 8,592,059 2 eth_start 12,384,180 3,792,121 id=81 12,384,266 86 id=82 12,384,271 5 id=84 12,384,272 1 tftp_done 19,722,618 7,338,346 bootm_start 19,722,625 7 id=1 19,802,553 79,928 id=2 19,802,573 20 id=3 20,583,572 780,999 id=4 20,583,573 1 id=5 20,583,585 12 id=6 21,306,107 722,522 id=7 21,306,110 3 id=8 21,306,123 13 id=15 21,874,684 568,561 start_kernel Accumulated time: 154,427 lcd Stashed 27 records ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- smc911x: MAC 08:00:08:1e:0f:44 BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.138 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-f4ANqQ/tmpBK3bpr-uImage tftp 0x00100000 tmp/snowball-f4ANqQ/tmpBK3bpr-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'tmp/snowball-f4ANqQ/tmpBK3bpr-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ########################################################## done Bytes transferred = 3711969 (38a3e1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3711905 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.138 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-UyK0LN/tmp2PGex8-uImage tftp 0x00100000 tmp/snowball-UyK0LN/tmp2PGex8-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'tmp/snowball-UyK0LN/tmp2PGex8-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ###################################################node: snowball status: on ############## ##### done Bytes transferred = 2934657 (2cc781 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2934593 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x800000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage tftp 0x800000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 3.1 MiB/s done Bytes transferred = 3676392 (3818e8 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 897.5 KiB/s done Bytes transferred = 20236 (4f0c hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) #bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffff0b ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 mainline/v3.13-8905-g627f4b3/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-8905-g627f4b3/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################ 5.9 MiB/s done Bytes transferred = 4999352 (4c48b8 hex) =>setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 mainline/v3.13-8905-g627f4b3/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.13-8905-g627f4b3/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-8905-g627f4b3/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1.4 MiB/s done Bytes transferred = 34380 (864c hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4c48b8 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- => tftp 0x10800000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 5.4 MiB/s done Bytes transferred = 3676392 (3818e8 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 =>tftp 0x11000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-8905-g627f4b3/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1.3 MiB/s done Bytes transferred = 34380 (864c hex) => printenv bootargs node: wandboard status: on printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x3818e8 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b Starting kernel ... ~$off # PYBOOT: Exception: timeout

11 years, 4 months

1
0
0 0

mainline build: 7 warnings 2 failures (mainline/v3.13-8905-g627f4b3)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 627f4b3 Merge tag 'microblaze-3.14-rc1' of git://git.monstr.eu/linux-2.6-microblaze Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-8905-g627f4b3/ Runtime: 41m 42s Passed: 121 Failed: 2 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: mini2440_defconfig tegra_defconfig ------------------------------------------------------------------------------- Errors: mini2440_defconfig: tegra_defconfig: drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] Warnings: 1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 4 months

1
0
0 0

mainline boot: 15 pass, 21 fail (v3.13-8789-g54c0a4b)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-8789-g54c0a4b Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig armada-370-mirabox: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 26.4 sec omap3-beagle-xm PASS: 0 min 56.3 sec am335x-bone PASS: 0 min 27.6 sec omap4-panda FAIL: 0 min 54.2 sec omap4-panda-es FAIL: 0 min 56.5 sec omap3-tobi,3730storm PASS: 0 min 25.2 sec omap3-tobi,3530overo PASS: 0 min 23.0 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 19.5 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard FAIL: 0 min 21.1 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 17.9 sec sun4i-a10-cubieboard FAIL: 0 min 18.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 4.1 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 34.3 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 32.3 sec tegra30-beaver FAIL: 0 min 24.0 sec am335x-boneblack PASS: 0 min 22.7 sec omap3-beagle-xm PASS: 0 min 59.9 sec sun7i-a20-cubieboard2 FAIL: 0 min 19.2 sec armada-370-mirabox FAIL: 0 min 28.6 sec omap4-panda FAIL: 0 min 59.5 sec omap4-panda-es FAIL: 0 min 56.7 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 30.4 sec sun4i-a10-cubieboard FAIL: 0 min 19.4 sec bcm28155-ap FAIL: 16 min 19.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.3 sec am335x-bone PASS: 0 min 25.3 sec imx6q-wandboard FAIL: 0 min 20.6 sec omap3-tobi,3730storm PASS: 0 min 19.8 sec imx6dl-wandboard,wand-dual FAIL: 0 min 22.0 sec omap3-tobi,3530overo PASS: 0 min 24.2 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 31.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 29.1 sec armada-370-mirabox FAIL: 0 min 27.9 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- 3.9 KiB/s done Bytes transferred = 20616 (5088 hex) Panda #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f08087 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 54.21 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ 3.9 KiB/s done Bytes transferred = 20856 (5178 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f08177 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.52 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x386250 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.47 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Bytes transferred = 34380 (864c hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4c4a70 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.06 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af730 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 17.93 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af730 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.44 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- tftp 0x407c0000 192.168.1.2:tmp/arndale-yU4LNl/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.167 Filename 'tmp/arndale-yU4LNl/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33440 (82a0 hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 #bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb29f Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 34.30 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- ################################################################# ########################################################## done Bytes transferred = 3711313 (38a151 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3711249 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 32.33 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 24 lines of boot log: ------------------------------------------------ Bytes transferred = 23808 (5d00 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x381658 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008cff Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 24.01 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log: ------------------------------------------------------- sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x381658 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.22 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2014-01-28 6:37:24 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3685946 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.64 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- 2 KiB/s done Bytes transferred = 20616 (5088 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f08087 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 59.45 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ 2.9 KiB/s done Bytes transferred = 20856 (5178 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f08177 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.69 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Image Name: Linux Created: 2014-01-28 6:40:23 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3690567 Bytes = 3.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.37 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x381658 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.38 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 24 lines of boot log: --------------------------------------------- File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-01-28 07:00:19 AM INFO: CriticalError <LAVA_DISPATCHER>2014-01-28 07:00:19 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-01-28 07:00:19 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-01-28 07:00:19 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/b23a0c284e56cf927c4d0b1fe76265f4… LBOOT: Result: FAIL LBOOT: Time: 979.43 seconds. imx6q-wandboard: FAIL: last 24 lines of boot log: ------------------------------------------------- Bytes transferred = 34380 (864c hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x381658 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.65 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log: ------------------------------------------------------------ 1.4 MiB/s done Bytes transferred = 32741 (7fe5 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100afe4 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.99 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- ################################################################# ##### done Bytes transferred = 2933761 (2cc401 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2933697 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 31.08 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Image Name: Linux Created: 2014-01-28 7:08:20 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2760751 Bytes = 2.6 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.06 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2014-01-28 7:07:52 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2756130 Bytes = 2.6 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.91 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

2
1
0 0

mainline boot: 5 passed 20 failed (mainline/v3.13-8789-g54c0a4b)

by Olof's autobooter

Failed boards: arndale exynos_defconfig : FAILED 1:25.66 beaver tegra_defconfig : BUILD FAILED beaver multi_v7_defconfig : FAILED 1:04.59 capri multi_v7_defconfig : FAILED 1:02.54 cubie sunxi_defconfig : FAILED 1:03.13 cubie multi_v7_defconfig : FAILED 1:01.19 cubie2 sunxi_defconfig : FAILED 1:01.14 cubie2 multi_v7_defconfig : FAILED 1:03.34 cubie2 multi_lpae_defconfig : FAILED 0:58.74 cubox dove_defconfig : FAILED 1:11.32 dalmore tegra_defconfig : BUILD FAILED dalmore multi_v7_defconfig : FAILED 1:07.59 dalmore multi_lpae_defconfig : FAILED 1:04.50 panda omap2plus_defconfig : FAILED 1:13.61 panda multi_v7_defconfig : FAILED 1:14.99 seaboard tegra_defconfig : BUILD FAILED seaboard multi_v7_defconfig : FAILED 1:07.73 snow exynos_defconfig : FAILED 1:11.27 snowball u8500_defconfig : FAILED 1:14.91 snowball multi_v7_defconfig : FAILED 1:05.84 trimslice tegra_defconfig : BUILD FAILED trimslice multi_v7_defconfig : FAILED 1:06.82 wandboard imx_v6_v7_defconfig : FAILED 1:02.68 wandboard multi_v7_defconfig : FAILED 1:08.26 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.12 bbb omap2plus_defconfig : passed 1:37.67 bbb multi_v7_defconfig : passed 1:18.01 capri bcm_defconfig : passed 0:41.89 sama5 sama5_defconfig : passed 1:55.02 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board arndale-exynos_defconfig failure log: ------------------------------------------------- Load address: 0x40800000 Loading: *################################################################# ################################################################# ########################################################## done Bytes transferred = 2755648 (2a0c40 hex) ARNDALE5250 # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 ARNDALE5250 # tftp 0x407c0000 mainline/v3.13-8789-g54c0a4b/exynos_defconfig/dtbs/exynos5250-arndale.dtb tftp 0x407c0000 mainline/v3.13-8789-g54c0a4b/exynos_defconfig/dtbs/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.176 Filename 'mainline/v3.13-8789-g54c0a4b/exynos_defconfig/dtbs/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33440 (82a0 hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw ARNDALE5250 #bootm 0x40800000 - 0x407c0000 bootm 0x40800000 - 0x407c0000 ## Booting kernel from Legacy Image at 40800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2755584 Bytes = 2.6 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff4000, end 4ffff29f ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x82000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3675736 (381658 hex) Tegra30 (Beaver) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra30 (Beaver) # tftp 0x83000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/tegra30-beaver.dtb tftp 0x83000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 2.5 MiB/s done Bytes transferred = 23808 (5d00 hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x381658 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff7000, end 8ffffcff ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- (user:build) Load fastboot kernel GET_DESC ->STRING DESC sending 'kernel' (3589 KB)... ................................................................................ ................................OKAY [ 0.771s] writing 'kernel'... downloading of 3675736 bytes finished Flashing Raw Image Writing to partition 'kernel' Writing 'kernOKAY [ 0.674s] finished. total time: 1.445s el' DONE! GET_DESC ->STRING DESC sending 'device-tree' (2 KB)... downloading OKAY [ 0.004s] writing 'device-tree'... of 2862 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'deOKAY [ 0.010s] finished. total time: 0.014s vice-tree' DONE! GET_DESC ->STRING DESC resuming boot... MMC read: dev # 0, block # 72320, cOKAY [ 0.004s] finished. total time: 0.004s ount 16384 ... 16384 blocks read: OK MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e003b2d Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- sun4i#tftp 0x40008000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage tftp 0x40008000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ##########node: cubie status: on ####################################################### ######################################################## 2.8 MiB/s done Bytes transferred = 3675736 (381658 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 264.6 KiB/s done Bytes transferred = 10869 (2a75 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x381658 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.154 sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x40008000 mainline/v3.13-8789-g54c0a4b/sunxi_defconfig/zImage tftp 0x40008000 mainline/v3.13-8789-g54c0a4b/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-8789-g54c0a4b/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.5 MiB/s done Bytes transferred = 1767216 (1af730 hex) sun4i#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun4i#tftp 0x41000000 mainline/v3.13-8789-g54c0a4b/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb tftp 0x41000000 mainline/v3.13-8789-g54c0a4b/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.154 Filename 'mainline/v3.13-8789-g54c0a4b/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 504.9 KiB/s done Bytes transferred = 10869 (2a75 hex) sun4i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp sun4i#bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af730 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa74 ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- .3 sun7i# tftp 0x40008000 mainline/v3.13-8789-g54c0a4b/multi_lpae_defconfig/zImage tftp 0x40008000 mainline/v3.13-8789-g54c0a4b/multi_lpae_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8789-g54c0a4b/multi_lpae_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ######################################################### 3.8 MiB/s done Bytes transferred = 3695184 (386250 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 mainline/v3.13-8789-g54c0a4b/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 mainline/v3.13-8789-g54c0a4b/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8789-g54c0a4b/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 596.7 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x386250 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- sun7i# tftp 0x40008000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage tftp 0x40008000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 4 MiB/s done Bytes transferred = 3675736 (381658 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 518.6 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x410node: cubie2 status: on 00000 Kernel image @ 0x40008000 [ 0x000000 - 0x381658 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.171 sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x40008000 mainline/v3.13-8789-g54c0a4b/sunxi_defconfig/zImage tftp 0x40008000 mainline/v3.13-8789-g54c0a4b/sunxi_defconfig/zImage Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8789-g54c0a4b/sunxi_defconfig/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 4 MiB/s done Bytes transferred = 1767216 (1af730 hex) sun7i# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 sun7i# tftp 0x41000000 mainline/v3.13-8789-g54c0a4b/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb tftp 0x41000000 mainline/v3.13-8789-g54c0a4b/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.3; our IP address is 172.16.1.171 Filename 'mainline/v3.13-8789-g54c0a4b/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 518.6 KiB/s done Bytes transferred = 12220 (2fbc hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i# bootz 0x40008000 - 0x41000000 bootz 0x40008000 - 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1af730 ] ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefbb ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-dove_defconfig failure log: ------------------------------------------------- CuBox>dhcp > dhcp Unknown command 'dhcp' - try 'help' CuBox>> setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 CuBox>> tftp 0x02000000 tmp/cubox-n4DEeV/tmpunDQ6X-uImage tftp 0x02000000 tmp/cubox-n4DEeV/tmpunDQ6X-uImage Using egiga0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.183 Filename 'tmp/cubox-n4DEeV/tmpunDQ6X-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ############################################################## done Bytes transferred = 2804055 (2ac957 hex) CuBox>>setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk CuBox>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk CuBox>bootm 0x02000000 > bootm 0x02000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-01-28 6:23:09 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2803991 Bytes = 2.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... node: cubox status: on OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-8789-g54c0a4b/multi_lpae_defconfig/zImage tftp 0x82000000 mainline/v3.13-8789-g54c0a4b/multi_lpae_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-8789-g54c0a4b/multi_lpae_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ######################################################### 2.8 MiB/s done Bytes transferred = 3695184 (386250 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-8789-g54c0a4b/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.13-8789-g54c0a4b/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-8789-g54c0a4b/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 1 MiB/s done Bytes transferred = 34015 (84df hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x386250 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff4de ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage tftp 0x82000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3675736 (381658 hex) Tegra114 (Dalmore) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb tftp 0x83000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.143 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 1.4 MiB/s done Bytes transferred = 34015 (84df hex) Tegra114 (Dalmore) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk Tegra114 (Dalmore) #bootz 0x82000000 - 0x83000000 bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x381658 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff4de ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- Loading: *################################################################# ################################################################# ################################################################# ######################################################## done Bytes transferred = 3675800 (381698 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *## done Bytes transferred = 20856 (5178 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3675736 Bytes = 3.5 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f08177 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-omap2plus_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################ done Bytes transferred = 4272856 (4132d8 hex) Panda # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Panda # tftp 0x81f00000 mainline/v3.13-8789-g54c0a4b/omap2plus_defconfig/dtbs/omap4-panda-es.dtb tftp 0x81f00000 mainline/v3.13-8789-g54c0a4b/omap2plus_defconfig/dtbs/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.182 Filename 'mainline/v3.13-8789-g54c0a4b/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *## done Bytes transferred = 20856 (5178 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk Panda # bootm 0x82000000 - 0x81f00000 bootm 0x82000000 - 0x81f00000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4272792 Bytes = 4.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Kernel Image ... OK OK Using Device Tree in place at 81f00000, end 81f08177 Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra20 (SeaBoard) # tftp 0x800000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage tftp 0x800000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3675736 (381658 hex) Tegra20 (SeaBoard) #setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (SeaBoard) # tftp 0x1800000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb tftp 0x1800000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb'. Load address: 0x1800000 Loading: *## 953.1 KiB/s done Bytes transferred = 25391 (632f hex) Tegra20 (SeaBoard) # printenv bootargs printenv bootargs bootargs=root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk Tegra20 (SeaBoard) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x381658 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff6000, end 0ffff32e ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-exynos_defconfig failure log: ------------------------------------------------- OK Loading Device Tree to 5fff0000, end 5ffff7f8 ... OK Starting kernel ... Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 1,685,062 1,585,062 board_init_f 1,734,909 49,847 board_init_r 1,737,119 2,210 board_init 1,867,833 130,714 board_init_done 1,948,405 80,572 id=64 1,953,837 5,432 main_loop 3,889,836 1,935,999 usb_start 8,569,068 4,679,232 tftp_start 8,569,085 17 id=80 8,569,087 2 eth_start 12,356,553 3,787,466 id=81 12,356,638 85 id=82 12,356,643 5 id=84 12,356,645 2 tftp_done 19,697,651 7,341,006 bootm_start 19,697,659 8 id=1 19,777,663 80,004 id=2 19,777,682 19 id=3 20,559,073 781,391 id=4 20,559,075 2 id=5 20,559,086 11 id=6 21,281,627 722,541 id=7 21,281,630 3 id=8 21,281,644 14 id=15 21,850,424 568,780 start_kernel Accumulated time: 143,264 lcd Stashed 27 records ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- smc911x: MAC 08:00:08:1e:0f:44 BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.138 U8500 $setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-5FXqBX/tmpuL1WYw-uImage tftp 0x00100000 tmp/snowball-5FXqBX/tmpuL1WYw-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'tmp/snowball-5FXqBX/tmpuL1WYw-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ########################################################## done Bytes transferred = 3711313 (38a151 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3711249 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.138 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-5BHW7p/tmp4gjJQc-uImage tftp 0x00100000 tmp/snowball-5BHW7p/tmp4gjJQc-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.138 Filename 'tmp/snowball-5BHW7p/tmp4gjJQc-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# #################################node: snowball status: on ################################ ##### done Bytes transferred = 2933761 (2cc401 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2933697 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- setenv serverip 172.16.1.3 Tegra20 (TrimSlice) #tftp 0x800000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage tftp 0x800000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 3675736 (381658 hex) Tegra20 (TrimSlice) # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 Tegra20 (TrimSlice) # tftp 0x1800000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb tftp 0x1800000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.129 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb'. Load address: 0x1800000 Loading: *## 823.2 KiB/s done Bytes transferred = 20236 (4f0c hex) Tegra20 (TrimSlice) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000 bootz 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x381658 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff8000, end 0fffff0b ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- tftp 0x10800000 mainline/v3.13-8789-g54c0a4b/imx_v6_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-8789-g54c0a4b/imx_v6_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################ 5.7 MiB/s done Bytes transferred = 4999792 (4c4a70 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 mainline/v3.13-8789-g54c0a4b/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.13-8789-g54c0a4b/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-8789-g54c0a4b/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 798.8 KiB/s done Bytes transferred = 34380 (864c hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4c4a70 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- => tftp 0x10800000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ######################################################## 6.1 MiB/s done Bytes transferred = 3675736 (381658 hex) => setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 => tftp 0x11000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.172 Filename 'mainline/v3.13-8789-g54c0a4b/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *### 1.8 MiB/s done Bytes transferred = 34380 (864c hex) => printenv bootargs printenv boonode: wandboard status: on targs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x381658 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100b64b Starting kernel ... ~$off # PYBOOT: Exception: timeout

11 years, 4 months

1
0
0 0

mainline build: 7 warnings 1 failures (mainline/v3.13-8789-g54c0a4b)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 54c0a4b Merge branch 'akpm' (incoming from Andrew) Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-8789-g54c0a4b/ Runtime: 40m 54s Passed: 122 Failed: 1 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: tegra_defconfig ------------------------------------------------------------------------------- Errors: tegra_defconfig: drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] Warnings: 1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 4 months

1
0
0 0

queue boot: 13 pass, 3 fail (v3.10.28-2-g934ab10)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.28-2-g934ab10 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 55.5 sec am335x-bone PASS: 0 min 27.2 sec omap4-panda PASS: 1 min 7.6 sec omap4-panda-es PASS: 1 min 7.3 sec omap3-tobi,3730storm PASS: 0 min 37.1 sec omap3-tobi,3530overo PASS: 0 min 34.1 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 15.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.4 sec armada-370-mirabox PASS: 0 min 19.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.5 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 19.9 sec armada-370-mirabox FAIL: 0 min 17.9 sec sun4i-a10-cubieboard FAIL: 1 min 17.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275de0>] (panic+0xa0/0x1e8) [<c0275de0>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271b38>] (kernel_init+0x8/0x158) [<c0271b38>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.28-00002-g934ab10 #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c001236c>] (handle_IPI+0x108/0x130) [<c001236c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0359f70 to 0xc0359fb8) 9f60: c1d5b6d8 00000000 000000c2 000000c2 9f80: c03604a8 c0358000 c036045c c0383b6c c027dec0 c0358000 c0383b6c c0358000 9fa0: 0000001f c0359fb8 c000f070 c004f990 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f990>] (cpu_startup_entry+0xfc/0x140) [<c004f990>] (cpu_startup_entry+0xfc/0x140) from [<c0328a3c>] (start_kernel+0x2c4/0x2d0) [<c0328a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 19.89 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.28-00002-g934ab10 #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275de0>] (panic+0xa0/0x1e8) [<c0275de0>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271b38>] (kernel_init+0x8/0x158) [<c0271b38>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 17.95 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 77.21 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

1
0
0 0

queue boot: 9 passed 1 failed (queue/v3.10.28-2-g934ab10)

by Olof's autobooter

Failed boards: cubie multi_v7_defconfig : FAILED 0:21.11 Successful boards: arndale exynos_defconfig : passed 1:00.98 beaver tegra_defconfig : passed 0:42.42 cubox dove_defconfig : passed 0:51.61 dalmore tegra_defconfig : passed 1:06.53 panda omap2plus_defconfig : passed 1:14.43 sama5 sama5_defconfig : passed 1:51.78 seaboard tegra_defconfig : passed 0:57.71 snow exynos_defconfig : passed 1:25.06 trimslice tegra_defconfig : passed 0:51.90 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.28-00002-g934ab10 #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275de0>] (panic+0xa0/0x1e8) [<c0275de0>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271b38>] (kernel_init+0x8/0x158) [<c0271b38>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic

11 years, 4 months

1
0
0 0

queue build: 23 warnings 0 failures (queue/v3.10.28-2-g934ab10)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 934ab10 md/raid5: fix long-standing problem with bitmap handling on write failure. Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.10.28-2-g934ab10/ Runtime: 32m 14s Passed: 121 Failed: 0 Warnings: 23 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-pxa/em-x270.c:480:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:484:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:603:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/gpio/gpio-omap.c:1529:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] 1 drivers/spi/spi-pl022.c:2226:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/video/backlight/max8925_bl.c:124:41: warning: statement with no effect [-Wunused-value] 1 include/linux/clocksource.h:345:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] Section mismatches:

11 years, 4 months

1
0
0 0

next boot: 32 pass, 5 fail (next-20140128)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140128 Failed boot tests (console logs at the end) =========================================== omap3-tobi,3730storm: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig omap3-tobi,3730storm: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 1 min 2.8 sec am335x-bone PASS: 0 min 27.6 sec omap4-panda PASS: 1 min 4.2 sec omap4-panda-es PASS: 1 min 6.3 sec omap3-tobi,3730storm FAIL: 1 min 17.8 sec omap3-tobi,3530overo PASS: 0 min 26.1 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.0 sec sun4i-a10-cubieboard PASS: 0 min 12.7 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 40.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 16.9 sec tegra30-beaver PASS: 0 min 19.2 sec am335x-boneblack PASS: 0 min 23.2 sec omap3-beagle-xm PASS: 0 min 53.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec armada-370-mirabox PASS: 0 min 21.4 sec omap4-panda PASS: 0 min 51.9 sec omap4-panda-es FAIL: 1 min 50.5 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 14.1 sec bcm28155-ap PASS: 1 min 14.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec am335x-bone PASS: 0 min 26.1 sec imx6q-wandboard PASS: 0 min 17.4 sec omap3-tobi,3730storm FAIL: 0 min 28.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec omap3-tobi,3530overo PASS: 0 min 21.5 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox PASS: 0 min 20.3 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ [ 6.063293] [<c0090604>] (handle_irq_event) from [<c0092efc>] (handle_level_irq+0xac/0x118) [ 6.072113] [<c0092efc>] (handle_level_irq) from [<c008fb90>] (generic_handle_irq+0x28/0x3c) [ 6.081024] [<c008fb90>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4) [ 6.089355] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74) [ 6.097991] [<c00085b4>] (omap3_intc_handle_irq) from [<c054c664>] (__irq_svc+0x44/0x5c) [ 6.106536] Exception stack(0xde0efce0 to 0xde0efd28) [ 6.111877] fce0: de50c000 de0efd2c fa0b4000 00000000 de0efd84 de50c000 00000000 00008002 [ 6.120513] fd00: de2af646 de2af640 de0efde6 00000000 00000000 de0efd28 c044f964 c0438e80 [ 6.129119] fd20: 20000113 ffffffff [ 6.132812] [<c054c664>] (__irq_svc) from [<c0438e80>] (mmc_wait_for_cmd+0x60/0x88) [ 6.140899] [<c0438e80>] (mmc_wait_for_cmd) from [<c0442974>] (mmc_io_rw_direct_host+0xa4/0x13c) [ 6.150177] [<c0442974>] (mmc_io_rw_direct_host) from [<c0443738>] (sdio_read_cis+0x168/0x298) [ 6.159271] [<c0443738>] (sdio_read_cis) from [<c0441c1c>] (mmc_sdio_init_card+0x3e0/0xaa4) [ 6.168060] [<c0441c1c>] (mmc_sdio_init_card) from [<c04425e8>] (mmc_attach_sdio+0x78/0x360) [ 6.176971] [<c04425e8>] (mmc_attach_sdio) from [<c043b138>] (mmc_rescan+0x260/0x2e8) [ 6.185241] [<c043b138>] (mmc_rescan) from [<c00590bc>] (process_one_work+0x1ac/0x4c4) [ 6.193603] [<c00590bc>] (process_one_work) from [<c0059f54>] (worker_thread+0x114/0x3b4) [ 6.202239] [<c0059f54>] (worker_thread) from [<c005fb48>] (kthread+0xcc/0xe8) [ 6.209838] [<c005fb48>] (kthread) from [<c000e548>] (ret_from_fork+0x14/0x2c) [ 6.217468] ---[ end trace 43960fcd559d75b2 ]--- ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 77.76 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 1.634979] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.642120] Registering SWP/SWPB emulation handler [ 1.648437] vwl1271: 1800 mV [ 1.654479] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.664489] twl 0-0048: PIH (irq 39) nested IRQs [ 1.670745] twl_rtc rtc.11: Enabling TWL-RTC [ 1.677795] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.684570] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.690551] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.696563] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.702514] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.707977] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.713348] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.718322] VDAC: 1800 mV [ 1.721923] VANA: 2100 mV [ 1.725402] VCXIO: 1800 mV [ 1.728698] VUSB: 3300 mV [ 1.732147] V1V8: 1800 mV [ 1.735656] V2V1: 2100 mV [ 1.863311] usb 1-1: new high-speed USB device number 2 using ehci-omap ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 110.49 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [ 1.322689] [<c05882dc>] (kernel_init) from [<c000e578>] (ret_from_fork+0x14/0x3c) [ 1.330280] Code: 8a000012 ebfff583 e2840054 f57ff05b (e1903f9f) [ 1.336426] ---[ end trace 8a226b0ea00fcc2d ]--- [ 1.341075] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.341075] [ 1.350236] CPU0: stopping [ 1.352953] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.13.0-next-20140128 #1 [ 1.361076] [<c001584c>] (unwind_backtrace) from [<c00113fc>] (show_stack+0x10/0x14) [ 1.368843] [<c00113fc>] (show_stack) from [<c058de20>] (dump_stack+0x84/0x94) [ 1.376086] [<c058de20>] (dump_stack) from [<c0014120>] (handle_IPI+0x148/0x174) [ 1.383502] [<c0014120>] (handle_IPI) from [<c00086fc>] (armada_370_xp_handle_irq+0xa8/0x110) [ 1.392052] [<c00086fc>] (armada_370_xp_handle_irq) from [<c0011f80>] (__irq_svc+0x40/0x50) [ 1.400422] Exception stack(0xc0895f68 to 0xc0895fb0) [ 1.405488] 5f60: ffffffed 2d744000 c089d4e0 00000000 c089c4cc c0894000 [ 1.413688] 5f80: c089c450 c093e60b c0598128 c0894000 c093e60b c0894000 00000000 c0895fb0 [ 1.421886] 5fa0: c000f118 c0080f98 60000113 ffffffff [ 1.426956] [<c0011f80>] (__irq_svc) from [<c0080f98>] (cpu_startup_entry+0x100/0x144) [ 1.434900] [<c0080f98>] (cpu_startup_entry) from [<c0813b00>] (start_kernel+0x358/0x364) [ 1.443100] [<c0813b00>] (start_kernel) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 22.69 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/3730storm-DmFCtL/omap3-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 56692 (dd74 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffef000, end 8ffffd73 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.78 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c04d0c40>] (kernel_init_freeable) from [<c03a27e8>] (kernel_init+0x8/0x120) [<c03a27e8>] (kernel_init) from [<c000e278>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff583 e2840054 f57ff05b (e1903f9f) ---[ end trace c8db8f9f32e4e8c5 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.13.0-next-20140128 #1 [<c0014824>] (unwind_backtrace) from [<c00110d4>] (show_stack+0x10/0x14) [<c00110d4>] (show_stack) from [<c03a7010>] (dump_stack+0x80/0x90) [<c03a7010>] (dump_stack) from [<c0013be4>] (handle_IPI+0x148/0x170) [<c0013be4>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c00>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000944 00000000 ee876000 c05044ac c03ae9c8 ee876000 7fc0: c0531ab6 00000001 c0531ab6 ee876000 00000000 ee877fe8 c000edec c0055698 7fe0: 60000113 ffffffff [<c0011c00>] (__irq_svc) from [<c0055698>] (cpu_startup_entry+0xf4/0x134) [<c0055698>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.14 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

1
0
0 0

next build: 6 warnings 0 failures (next/next-20140128)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: c8b89da Add linux-next specific files for 20140128 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140128/ Runtime: 39m 11s Passed: 123 Failed: 0 Warnings: 6 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

11 years, 4 months

1
0
0 0

queue boot: 35 pass, 0 fail (v3.12.9-2-gcb71f08)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.9-2-gcb71f08 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 24.9 sec omap3-beagle-xm PASS: 0 min 56.5 sec am335x-bone PASS: 0 min 26.9 sec omap4-panda PASS: 1 min 3.6 sec omap4-panda-es PASS: 1 min 15.5 sec omap3-tobi,3730storm PASS: 0 min 24.0 sec omap3-tobi,3530overo PASS: 0 min 21.6 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec imx6q-wandboard PASS: 0 min 16.1 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.9 sec tegra30-beaver PASS: 0 min 21.4 sec am335x-boneblack PASS: 0 min 32.2 sec omap3-beagle-xm PASS: 0 min 56.3 sec sun7i-a20-cubieboard2 PASS: 0 min 13.6 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 16.2 sec omap4-panda-es PASS: 1 min 4.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 13.2 sec bcm28155-ap PASS: 1 min 4.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.8 sec am335x-bone PASS: 0 min 33.6 sec imx6q-wandboard PASS: 0 min 16.2 sec omap3-tobi,3730storm PASS: 0 min 20.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.1 sec omap3-tobi,3530overo PASS: 0 min 20.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.0 sec

11 years, 4 months

1
0
0 0

queue boot: 13 pass, 3 fail (v3.10.28-1-g9ee1d0a)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.28-1-g9ee1d0a Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 59.5 sec am335x-bone PASS: 0 min 26.8 sec omap4-panda PASS: 1 min 6.5 sec omap4-panda-es PASS: 1 min 2.9 sec omap3-tobi,3730storm PASS: 0 min 33.3 sec omap3-tobi,3530overo PASS: 0 min 34.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.2 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.9 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.3 sec armada-370-mirabox PASS: 0 min 19.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.3 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec armada-370-mirabox FAIL: 0 min 16.3 sec sun4i-a10-cubieboard FAIL: 1 min 13.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.5 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275de0>] (panic+0xa0/0x1e8) [<c0275de0>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271b38>] (kernel_init+0x8/0x158) [<c0271b38>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.28-00001-g9ee1d0a #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c001236c>] (handle_IPI+0x108/0x130) [<c001236c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0359f70 to 0xc0359fb8) 9f60: c1d5b6d8 00000000 000000c2 000000c2 9f80: c03604a8 c0358000 c036045c c0383b6c c027dec0 c0358000 c0383b6c c0358000 9fa0: 0000001f c0359fb8 c000f070 c004f990 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f990>] (cpu_startup_entry+0xfc/0x140) [<c004f990>] (cpu_startup_entry+0xfc/0x140) from [<c0328a3c>] (start_kernel+0x2c4/0x2d0) [<c0328a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 20.10 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.28-00001-g9ee1d0a #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275de0>] (panic+0xa0/0x1e8) [<c0275de0>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271b38>] (kernel_init+0x8/0x158) [<c0271b38>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 16.33 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 73.76 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

1
0
0 0

queue boot: 24 passed 2 failed (queue/v3.12.9-2-gcb71f08)

by Olof's autobooter

Failed boards: bbb omap2plus_defconfig : FAILED 1:35.77 bbb multi_v7_defconfig : FAILED 1:34.84 Successful boards: arndale exynos_defconfig : passed 1:05.95 beaver tegra_defconfig : passed 0:53.35 beaver multi_v7_defconfig : passed 0:39.65 capri bcm_defconfig : passed 0:42.70 capri multi_v7_defconfig : passed 0:42.25 cubie multi_v7_defconfig : passed 0:54.40 cubie2 multi_v7_defconfig : passed 0:51.34 cubie2 multi_lpae_defconfig : passed 0:54.14 cubox dove_defconfig : passed 0:58.76 dalmore tegra_defconfig : passed 1:20.17 dalmore multi_v7_defconfig : passed 1:01.77 dalmore multi_lpae_defconfig : passed 1:00.65 panda omap2plus_defconfig : passed 1:19.02 panda multi_v7_defconfig : passed 1:08.78 sama5 sama5_defconfig : passed 1:52.56 seaboard tegra_defconfig : passed 1:00.31 seaboard multi_v7_defconfig : passed 0:53.91 snow exynos_defconfig : passed 1:24.05 snowball u8500_defconfig : passed 1:26.74 snowball multi_v7_defconfig : passed 1:00.19 trimslice tegra_defconfig : passed 1:00.24 trimslice multi_v7_defconfig : passed 0:47.39 wandboard imx_v6_v7_defconfig : passed 0:48.27 wandboard multi_v7_defconfig : passed 0:47.83 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.244999] RPC: Registered tcp transport module. [ 0.245009] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.245796] mop500-uib: failed to get adapter i2c2 [ 0.262173] NFS: Registering the id_resolver key type [ 0.262291] Key type id_resolver registered [ 0.262305] Key type id_legacy registered [ 0.262700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.262721] io scheduler noop registered [ 0.262734] io scheduler deadline registered [ 0.262980] io scheduler cfq registered (default) [ 0.263835] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.341726] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.343611] Serial: IMX driver [ 0.344584] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.937644] console [ttyO0] enabled [ 0.942449] serial: Freescale lpuart driver [ 0.947229] [drm] Initialized drm 1.1.0 20060810 [ 0.954183] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.961124] ehci-platform: EHCI generic platform driver [ 0.966753] ehci-omap: OMAP-EHCI Host Controller driver [ 0.972386] ehci-orion: EHCI orion driver [ 0.976700] SPEAr-ehci: EHCI SPEAr driver [ 0.981061] tegra-ehci: Tegra EHCI driver [ 0.985647] usbcore: registered new interface driver usb-storage [ 0.993479] mousedev: PS/2 mouse device common for all mice [ 1.000766] sdhci: Secure Digital Host Controller Interface driver [ 1.007289] sdhci: Copyright(c) Pierre Ossman [ 1.012329] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.019289] usbcore: registered new interface driver usbhid [ 1.025211] usbhid: USB HID core driver [ 1.029664] TCP: cubic registered [ 1.034089] NET: Registered protocol family 10 [ 1.039911] sit: IPv6 over IPv4 tunneling driver [ 1.045852] Key type dns_resolver registered [ 1.050613] Registering SWP/SWPB emulation handler [ 1.057818] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.063917] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.074024] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.825925] i2c /dev entries driver [ 1.830187] Driver for 1-wire Dallas network protocol. [ 1.842383] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.855056] of_get_named_gpio_flags exited with status 53 [ 1.860773] of_get_named_gpio_flags exited with status 54 [ 1.866573] of_get_named_gpio_flags exited with status 55 [ 1.872269] of_get_named_gpio_flags exited with status 56 [ 1.878050] of_get_named_gpio_flags exited with status 53 [ 1.886009] of_get_named_gpio_flags exited with status 54 [ 1.892706] of_get_named_gpio_flags exited with status 55 [ 1.899792] of_get_named_gpio_flags exited with status 56 [ 1.908808] ledtrig-cpu: registered to indicate activity on CPUs [ 1.917513] usbcore: registered new interface driver usbhid [ 1.923389] usbhid: USB HID core driver [ 1.929333] oprofile: no performance counters [ 1.937402] oprofile: using timer interrupt. [ 1.942825] TCP: cubic registered [ 1.946570] Initializing XFRM netlink socket [ 1.951280] NET: Registered protocol family 17 [ 1.956151] NET: Registered protocol family 15 [ 1.961346] Key type dns_resolver registered [ 1.966077] ThumbEE CPU extension supported. [ 1.992220] DCDC1: at 1500 mV [ 1.998750] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.007507] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.015477] LDO1: at 1800 mV [ 2.021409] LDO2: at 3300 mV [ 2.028521] LDO3: 1800 mV [ 2.034515] LDO4: at 3300 mV [ 2.040442] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.047131] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.124074] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.130517] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.140622] libphy: 4a101000.mdio: probed [ 2.145015] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.155232] Random MACID = 86:16:06:d4:86:6c [ 2.166299] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.180334] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

11 years, 4 months

1
0
0 0

queue build: 17 warnings 0 failures (queue/v3.12.9-2-gcb71f08)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: cb71f08 md/raid5: fix long-standing problem with bitmap handling on write failure. Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.9-2-gcb71f08/ Runtime: 34m 8s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 4 months

1
0
0 0

queue boot: 9 passed 1 failed (queue/v3.10.28-1-g9ee1d0a)

by Olof's autobooter

Failed boards: cubie multi_v7_defconfig : FAILED 0:23.43 Successful boards: arndale exynos_defconfig : passed 1:02.57 beaver tegra_defconfig : passed 0:43.65 cubox dove_defconfig : passed 0:54.82 dalmore tegra_defconfig : passed 1:06.39 panda omap2plus_defconfig : passed 1:15.45 sama5 sama5_defconfig : passed 1:56.25 seaboard tegra_defconfig : passed 0:52.64 snow exynos_defconfig : passed 1:22.73 trimslice tegra_defconfig : passed 0:51.92 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.28-00001-g9ee1d0a #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275de0>] (panic+0xa0/0x1e8) [<c0275de0>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271b38>] (kernel_init+0x8/0x158) [<c0271b38>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic

11 years, 4 months

1
0
0 0

queue build: 23 warnings 0 failures (queue/v3.10.28-1-g9ee1d0a)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 9ee1d0a kvm: x86: fix apic_base enable check Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.10.28-1-g9ee1d0a/ Runtime: 32m 18s Passed: 121 Failed: 0 Warnings: 23 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-pxa/em-x270.c:480:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:484:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:603:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/gpio/gpio-omap.c:1529:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] 1 drivers/spi/spi-pl022.c:2226:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/video/backlight/max8925_bl.c:124:41: warning: statement with no effect [-Wunused-value] 1 include/linux/clocksource.h:345:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] Section mismatches:

11 years, 4 months

1
0
0 0

new mvebu/armada-370 boot failure (was: mainline boot: 33 pass, 3 fail (v3.13-8631-gba635f8))

by Kevin Hilman

On Mon, Jan 27, 2014 at 9:59 AM, Kevin's boot bot <khilman(a)linaro.org> wrote: > Automated DT boot report for various ARM defconfigs. > > > Tree/Branch: mainline > Git describe: v3.13-8631-gba635f8 > Failed boot tests (console logs at the end) > =========================================== > armada-370-mirabox: FAIL: multi_v7_defconfig This is a new(ish) boot failure that I finally bisected. Note that it only fails on multi_v7_defconfig, and not mvebu_defconfig. When it fails, there's no useful console output, but it was bisected down to: first bad commit: [af8d1c63afcbf36eea06789c92e22d4af118d2fb] ARM: mvebu: Add support to get the ID and the revision of a SoC. Based on an idea from Jason, I added CONFIG_PCI=y and CONFIG_MVEBU_PCI=y to multi_v7_defconfig and that made it start booting again, some something is probably hanging when accessing PCI registers? Kevin

11 years, 4 months

3
2
0 0

mainline boot: 33 pass, 3 fail (v3.13-8631-gba635f8)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-8631-gba635f8 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 0 min 54.9 sec am335x-bone PASS: 0 min 27.5 sec omap4-panda PASS: 1 min 5.6 sec omap4-panda-es PASS: 1 min 6.6 sec omap3-tobi,3730storm PASS: 0 min 25.5 sec omap3-tobi,3530overo PASS: 0 min 22.9 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec imx6q-wandboard PASS: 0 min 16.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.6 sec sun4i-a10-cubieboard PASS: 0 min 15.9 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 32.6 sec tegra30-beaver PASS: 0 min 19.3 sec am335x-boneblack PASS: 0 min 22.3 sec omap3-beagle-xm PASS: 0 min 59.7 sec sun7i-a20-cubieboard2 PASS: 0 min 13.7 sec armada-370-mirabox FAIL: 0 min 27.0 sec omap4-panda PASS: 1 min 4.2 sec omap4-panda-es PASS: 1 min 2.1 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 30.3 sec sun4i-a10-cubieboard PASS: 0 min 13.4 sec bcm28155-ap PASS: 1 min 9.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.3 sec am335x-bone PASS: 0 min 25.1 sec imx6q-wandboard PASS: 0 min 16.4 sec omap3-tobi,3730storm PASS: 0 min 23.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.4 sec omap3-tobi,3530overo PASS: 0 min 20.5 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.2 sec armada-370-mirabox PASS: 0 min 20.2 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2014-01-27 17:40:19 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3685778 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.02 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Image Name: Linux Created: 2014-01-27 17:39:42 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3690399 Bytes = 3.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.27 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c04cbc40>] (kernel_init_freeable) from [<c039ef64>] (kernel_init+0x8/0x120) [<c039ef64>] (kernel_init) from [<c000e278>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff583 e2840054 f57ff05b (e1903f9f) ---[ end trace 7cf218136a715187 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.13.0-08631-gba635f8 #1 [<c0014824>] (unwind_backtrace) from [<c00110d4>] (show_stack+0x10/0x14) [<c00110d4>] (show_stack) from [<c03a378c>] (dump_stack+0x80/0x90) [<c03a378c>] (dump_stack) from [<c0013be4>] (handle_IPI+0x148/0x170) [<c0013be4>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c00>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000954 00000000 ee876000 c05004ac c03aa9c8 ee876000 7fc0: c052a9f6 00000001 c052a9f6 ee876000 00000000 ee877fe8 c000edec c0055688 7fe0: 60000113 ffffffff [<c0011c00>] (__irq_svc) from [<c0055688>] (cpu_startup_entry+0xf4/0x134) [<c0055688>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.16 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

1
0
0 0

mainline boot: 33 pass, 3 fail (v3.13-8627-gba6b508)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-8627-gba6b508 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 0 min 59.0 sec am335x-bone PASS: 0 min 27.7 sec omap4-panda PASS: 1 min 16.9 sec omap4-panda-es PASS: 1 min 13.1 sec omap3-tobi,3730storm PASS: 0 min 22.1 sec omap3-tobi,3530overo PASS: 0 min 22.7 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.6 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.0 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.8 sec sun4i-a10-cubieboard PASS: 0 min 12.8 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 29.7 sec tegra30-beaver PASS: 0 min 18.8 sec am335x-boneblack PASS: 0 min 22.4 sec omap3-beagle-xm PASS: 0 min 59.1 sec sun7i-a20-cubieboard2 PASS: 0 min 13.9 sec armada-370-mirabox FAIL: 0 min 28.7 sec omap4-panda PASS: 1 min 6.2 sec omap4-panda-es PASS: 1 min 1.0 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 30.2 sec sun4i-a10-cubieboard PASS: 0 min 13.6 sec bcm28155-ap PASS: 0 min 59.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.3 sec am335x-bone PASS: 0 min 25.1 sec imx6q-wandboard PASS: 0 min 16.3 sec omap3-tobi,3730storm PASS: 0 min 23.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.6 sec omap3-tobi,3530overo PASS: 0 min 20.9 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.2 sec armada-370-mirabox PASS: 0 min 20.2 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- Image Name: Linux Created: 2014-01-27 17:06:09 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3685770 Bytes = 3.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.69 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Image Name: Linux Created: 2014-01-27 17:09:08 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3690391 Bytes = 3.5 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.25 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c04cbc40>] (kernel_init_freeable) from [<c039ef64>] (kernel_init+0x8/0x120) [<c039ef64>] (kernel_init) from [<c000e278>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff583 e2840054 f57ff05b (e1903f9f) ---[ end trace 6ecbdb2475708342 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.13.0-08627-gba6b508 #1 [<c0014824>] (unwind_backtrace) from [<c00110d4>] (show_stack+0x10/0x14) [<c00110d4>] (show_stack) from [<c03a378c>] (dump_stack+0x80/0x90) [<c03a378c>] (dump_stack) from [<c0013be4>] (handle_IPI+0x148/0x170) [<c0013be4>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c00>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 0000094c 00000000 ee876000 c05004ac c03aa9c8 ee876000 7fc0: c052a9f6 00000001 c052a9f6 ee876000 00000000 ee877fe8 c000edec c0055688 7fe0: 60000113 ffffffff [<c0011c00>] (__irq_svc) from [<c0055688>] (cpu_startup_entry+0xf4/0x134) [<c0055688>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.23 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

1
0
0 0

mainline boot: 25 passed 0 failed (mainline/v3.13-8631-gba635f8)

by Olof's autobooter

Failed boards: beaver tegra_defconfig : BUILD FAILED dalmore tegra_defconfig : BUILD FAILED seaboard tegra_defconfig : BUILD FAILED trimslice tegra_defconfig : BUILD FAILED Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.46 arndale exynos_defconfig : passed 1:01.43 bbb omap2plus_defconfig : passed 1:31.82 bbb multi_v7_defconfig : passed 1:21.46 beaver multi_v7_defconfig : passed 0:39.80 capri bcm_defconfig : passed 0:43.02 capri multi_v7_defconfig : passed 0:42.01 cubie sunxi_defconfig : passed 0:48.27 cubie multi_v7_defconfig : passed 0:48.84 cubie2 sunxi_defconfig : passed 0:47.74 cubie2 multi_v7_defconfig : passed 0:58.71 cubie2 multi_lpae_defconfig : passed 0:47.89 cubox dove_defconfig : warnings 1:06.81 dalmore multi_v7_defconfig : passed 1:00.12 dalmore multi_lpae_defconfig : passed 1:00.93 panda omap2plus_defconfig : passed 1:17.33 panda multi_v7_defconfig : passed 1:12.49 sama5 sama5_defconfig : passed 1:55.86 seaboard multi_v7_defconfig : passed 0:49.43 snow exynos_defconfig : passed 1:23.32 snowball u8500_defconfig : passed 1:30.13 snowball multi_v7_defconfig : passed 1:06.83 trimslice multi_v7_defconfig : passed 0:43.50 wandboard imx_v6_v7_defconfig : passed 0:57.66 wandboard multi_v7_defconfig : passed 0:52.37 Board legend is available at http://arm-soc.lixom.net/boards.html

11 years, 4 months

1
0
0 0

mainline build: 7 warnings 1 failures (mainline/v3.13-8631-gba635f8)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: ba635f8 Merge tag 'trace-fixes-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-8631-gba635f8/ Runtime: 21m 38s Passed: 122 Failed: 1 Warnings: 7 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: tegra_defconfig ------------------------------------------------------------------------------- Errors: tegra_defconfig: drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration] drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration] Warnings: 1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable] 1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 4 months

1
0
0 0

mainline boot: 24 passed 0 failed (mainline/v3.13-8627-gba6b508)

by Olof's autobooter

Failed boards: beaver tegra_defconfig : BUILD FAILED dalmore tegra_defconfig : BUILD FAILED seaboard tegra_defconfig : BUILD FAILED trimslice tegra_defconfig : BUILD FAILED Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.42 arndale exynos_defconfig : passed 1:02.17 bbb multi_v7_defconfig : passed 1:07.72 beaver multi_v7_defconfig : passed 0:42.42 capri bcm_defconfig : passed 0:42.41 capri multi_v7_defconfig : passed 0:41.97 cubie sunxi_defconfig : passed 0:51.42 cubie multi_v7_defconfig : passed 0:50.37 cubie2 sunxi_defconfig : passed 0:50.76 cubie2 multi_v7_defconfig : passed 0:56.71 cubie2 multi_lpae_defconfig : passed 0:47.97 cubox dove_defconfig : warnings 1:11.64 dalmore multi_v7_defconfig : passed 1:00.92 dalmore multi_lpae_defconfig : passed 1:01.00 panda omap2plus_defconfig : passed 1:18.51 panda multi_v7_defconfig : passed 1:21.86 sama5 sama5_defconfig : passed 1:51.49 seaboard multi_v7_defconfig : passed 0:50.41 snow exynos_defconfig : passed 1:23.79 snowball u8500_defconfig : passed 1:29.65 snowball multi_v7_defconfig : passed 1:06.76 trimslice multi_v7_defconfig : passed 0:43.51 wandboard imx_v6_v7_defconfig : passed 0:53.41 wandboard multi_v7_defconfig : passed 1:01.29 Board legend is available at http://arm-soc.lixom.net/boards.html

11 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports January 2014