Kernel-build-reports
January 2014
kernel-build-reports@lists.linaro.org
- 13 participants
- 419 discussions
mainline boot: 26 passed 0 failed (mainline/v3.13-9318-g30c867e)
by Olof's autobooter
Failed boards:
beaver tegra_defconfig : BUILD FAILED
dalmore tegra_defconfig : BUILD FAILED
seaboard tegra_defconfig : BUILD FAILED
trimslice tegra_defconfig : BUILD FAILED
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:25.14
arndale exynos_defconfig : passed 1:04.44
bbb multi_v7_defconfig : passed 1:11.02
beaver multi_v7_defconfig : passed 0:49.97
capri bcm_defconfig : passed 0:42.59
capri multi_v7_defconfig : passed 0:42.76
cubie sunxi_defconfig : passed 0:49.95
cubie multi_v7_defconfig : passed 0:51.87
cubie2 sunxi_defconfig : passed 0:50.27
cubie2 multi_v7_defconfig : passed 0:58.53
cubie2 multi_lpae_defconfig : passed 0:48.43
cubox dove_defconfig : warnings 1:11.57
dalmore multi_v7_defconfig : passed 1:04.05
dalmore multi_lpae_defconfig : passed 1:00.78
hummingboard imx_v6_v7_defconfig : passed 1:16.61
hummingboard multi_v7_defconfig : passed 0:55.24
panda omap2plus_defconfig : passed 1:19.97
panda multi_v7_defconfig : passed 1:17.67
sama5 sama5_defconfig : passed 1:57.99
seaboard multi_v7_defconfig : passed 0:53.67
snow exynos_defconfig : passed 1:23.41
snowball u8500_defconfig : passed 1:33.32
snowball multi_v7_defconfig : passed 1:05.19
trimslice multi_v7_defconfig : passed 0:46.53
wandboard imx_v6_v7_defconfig : passed 0:55.46
wandboard multi_v7_defconfig : passed 0:58.63
Board legend is available at http://arm-soc.lixom.net/boards.html
11 years, 4 months
- 1
- 0
mainline build: 5 warnings 1 failures (mainline/v3.13-9318-g30c867e)
by Olof's autobuilder
Here are the build results from automated periodic testing.
The tree being built was mainline, found at:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch)
Topmost commit:
30c867e Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux
Build logs (stderr only) can be found at the following link (experimental):
http://arm-soc.lixom.net/buildlogs/mainline/v3.13-9318-g30c867e/
Runtime: 41m 38s
Passed: 122
Failed: 1
Warnings: 5
Section mismatches: 0
-------------------------------------------------------------------------------
Failed defconfigs:
tegra_defconfig
-------------------------------------------------------------------------------
Errors:
tegra_defconfig:
drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration]
Warnings:
1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable]
1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable]
1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable]
1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function]
1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function]
Section mismatches:
11 years, 4 months
- 1
- 0
mainline boot: 31 pass, 5 fail (v3.13-9240-g1329311)
by Kevin's boot bot
Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline
Git describe: v3.13-9240-g1329311
Failed boot tests (console logs at the end)
===========================================
omap3-tobi,3730storm: FAIL: omap2plus_defconfig
armada-370-mirabox: FAIL: multi_v7_defconfig
armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig
omap3-tobi,3730storm: FAIL: multi_v7_defconfig
armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
am335x-boneblack PASS: 0 min 25.6 sec
omap3-beagle-xm PASS: 1 min 0.7 sec
am335x-bone PASS: 0 min 27.5 sec
omap4-panda PASS: 1 min 5.4 sec
omap4-panda-es PASS: 1 min 14.2 sec
omap3-tobi,3730storm FAIL: 1 min 20.5 sec
omap3-tobi,3530overo PASS: 0 min 25.9 sec
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2 PASS: 0 min 14.0 sec
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec
imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec
imx6q-wandboard PASS: 0 min 17.3 sec
sunxi_defconfig
---------------
sun7i-a20-cubieboard2 PASS: 0 min 11.7 sec
sun4i-a10-cubieboard PASS: 0 min 17.3 sec
bcm_defconfig
-------------
bcm28155-ap PASS: 0 min 58.8 sec
exynos_defconfig
----------------
exynos5250-arndale PASS: 0 min 30.2 sec
multi_v7_defconfig
------------------
ste-snowball PASS: 0 min 29.4 sec
tegra30-beaver PASS: 0 min 14.3 sec
am335x-boneblack PASS: 0 min 22.6 sec
omap3-beagle-xm PASS: 0 min 54.1 sec
sun7i-a20-cubieboard2 PASS: 0 min 14.0 sec
armada-370-mirabox FAIL: 0 min 28.7 sec
omap4-panda PASS: 1 min 2.7 sec
omap4-panda-es PASS: 1 min 6.7 sec
armada-xp-openblocks-ax3-4 FAIL: 0 min 30.3 sec
sun4i-a10-cubieboard PASS: 0 min 18.0 sec
bcm28155-ap PASS: 1 min 4.2 sec
imx6dl-wandboard,wand-solo PASS: 0 min 17.7 sec
am335x-bone PASS: 0 min 25.2 sec
imx6q-wandboard PASS: 0 min 16.6 sec
omap3-tobi,3730storm FAIL: 0 min 25.6 sec
imx6dl-wandboard,wand-dual PASS: 0 min 17.4 sec
omap3-tobi,3530overo PASS: 0 min 20.7 sec
u8500_defconfig
---------------
ste-snowball PASS: 0 min 30.7 sec
sama5_defconfig
---------------
sama5d35ek PASS: 0 min 17.5 sec
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4 FAIL: 0 min 20.1 sec
armada-370-mirabox PASS: 0 min 20.3 sec
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap3-tobi,3730storm: FAIL: last 24 lines of boot log:
------------------------------------------------------
[ 5.984558] [<c0092ed4>] (handle_level_irq) from [<c008fb68>] (generic_handle_irq+0x28/0x3c)
[ 5.993469] [<c008fb68>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4)
[ 6.001831] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74)
[ 6.010467] [<c00085b4>] (omap3_intc_handle_irq) from [<c0548b64>] (__irq_svc+0x44/0x5c)
[ 6.018981] Exception stack(0xde0efcd0 to 0xde0efd18)
[ 6.024322] fcc0: de412480 01002600 fa0b4000 00000000
[ 6.032958] fce0: de0efd2c de0efd3c de412000 00008002 de4558c6 de4558c0 de0efde6 00000000
[ 6.041564] fd00: 00000000 de0efd18 c044de60 c0436eb8 20000113 ffffffff
[ 6.048553] [<c0548b64>] (__irq_svc) from [<c0436eb8>] (__mmc_start_req+0x54/0x84)
[ 6.056549] [<c0436eb8>] (__mmc_start_req) from [<c0437358>] (mmc_wait_for_cmd+0x58/0x88)
[ 6.065185] [<c0437358>] (mmc_wait_for_cmd) from [<c0440e90>] (mmc_io_rw_direct_host+0xa4/0x13c)
[ 6.074432] [<c0440e90>] (mmc_io_rw_direct_host) from [<c0441c54>] (sdio_read_cis+0x168/0x298)
[ 6.083526] [<c0441c54>] (sdio_read_cis) from [<c0440138>] (mmc_sdio_init_card+0x3e0/0xaa4)
[ 6.092346] [<c0440138>] (mmc_sdio_init_card) from [<c0440b04>] (mmc_attach_sdio+0x78/0x360)
[ 6.101257] [<c0440b04>] (mmc_attach_sdio) from [<c0439670>] (mmc_rescan+0x260/0x2e8)
[ 6.109527] [<c0439670>] (mmc_rescan) from [<c00590b8>] (process_one_work+0x1ac/0x4c4)
[ 6.117889] [<c00590b8>] (process_one_work) from [<c0059f50>] (worker_thread+0x114/0x3b4)
[ 6.126525] [<c0059f50>] (worker_thread) from [<c005fb44>] (kthread+0xcc/0xe8)
[ 6.134155] [<c005fb44>] (kthread) from [<c000e548>] (ret_from_fork+0x14/0x2c)
[ 6.141754] ---[ end trace 995ad03cf79ac362 ]---
~$off
# PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'>
# PYBOOT: Time: 80.47 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
armada-370-mirabox: FAIL: last 24 lines of boot log:
----------------------------------------------------
Image Name: Linux
Created: 2014-01-30 2:06:24 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3691058 Bytes = 3.5 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 kB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.74 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
------------------------------------------------------------
Image Name: Linux
Created: 2014-01-30 2:09:26 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3695679 Bytes = 3.5 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 03000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 30.27 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log:
------------------------------------------------------
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/3730storm-KNGtYG/omap3-tobi.dtb'.
Load address: 0x81f00000
Loading: *####
2.3 MiB/s
done
Bytes transferred = 56692 (dd74 hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz ${loadaddr} - 0x81f00000
bootz ${loadaddr} - 0x81f00000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Loading Device Tree to 8ffef000, end 8ffffd73 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 25.55 seconds.
# PYBOOT: Result: FAIL
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
------------------------------------------------------------
[<c04cdc40>] (kernel_init_freeable) from [<c039fa40>] (kernel_init+0x8/0x120)
[<c039fa40>] (kernel_init) from [<c000e278>] (ret_from_fork+0x14/0x3c)
Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f)
---[ end trace 162027c5641256d6 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.13.0-09240-g1329311 #1
[<c0014824>] (unwind_backtrace) from [<c00110d4>] (show_stack+0x10/0x14)
[<c00110d4>] (show_stack) from [<c03a4268>] (dump_stack+0x80/0x90)
[<c03a4268>] (dump_stack) from [<c0013be4>] (handle_IPI+0x148/0x170)
[<c0013be4>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0)
[<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c00>] (__irq_svc+0x40/0x50)
Exception stack(0xee877fa0 to 0xee877fe8)
7fa0: eefe65b8 00000000 000009a4 00000000 ee876000 c05024ac c03ab9c8 ee876000
7fc0: c052ec76 00000001 c052ec76 ee876000 00000000 ee877fe8 c000edec c0055680
7fe0: 60000113 ffffffff
[<c0011c00>] (__irq_svc) from [<c0055680>] (cpu_startup_entry+0xf4/0x134)
[<c0055680>] (cpu_startup_entry) from [<00008644>] (0x8644)
~$off
# PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054
# PYBOOT: Time: 20.06 seconds.
# PYBOOT: Result: FAIL
11 years, 4 months
- 1
- 0
mainline boot: 25 passed 0 failed (mainline/v3.13-9240-g1329311)
by Olof's autobooter
Failed boards:
beaver tegra_defconfig : BUILD FAILED
dalmore tegra_defconfig : BUILD FAILED
seaboard tegra_defconfig : BUILD FAILED
trimslice tegra_defconfig : BUILD FAILED
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:22.52
arndale exynos_defconfig : passed 1:00.89
bbb omap2plus_defconfig : passed 1:31.94
bbb multi_v7_defconfig : passed 1:20.12
beaver multi_v7_defconfig : passed 0:44.79
capri bcm_defconfig : passed 0:42.30
capri multi_v7_defconfig : passed 0:42.69
cubie sunxi_defconfig : passed 0:47.96
cubie multi_v7_defconfig : passed 0:49.13
cubie2 sunxi_defconfig : passed 0:47.23
cubie2 multi_v7_defconfig : passed 1:00.19
cubie2 multi_lpae_defconfig : passed 0:47.98
cubox dove_defconfig : warnings 1:11.13
dalmore multi_v7_defconfig : passed 1:18.56
dalmore multi_lpae_defconfig : passed 1:00.68
panda omap2plus_defconfig : passed 1:16.73
panda multi_v7_defconfig : passed 1:12.74
sama5 sama5_defconfig : passed 1:48.52
seaboard multi_v7_defconfig : passed 0:50.41
snow exynos_defconfig : passed 1:23.58
snowball u8500_defconfig : passed 1:37.98
snowball multi_v7_defconfig : passed 1:08.12
trimslice multi_v7_defconfig : passed 0:43.61
wandboard imx_v6_v7_defconfig : passed 0:55.60
wandboard multi_v7_defconfig : passed 0:53.04
Board legend is available at http://arm-soc.lixom.net/boards.html
11 years, 4 months
- 1
- 0
mainline build: 5 warnings 1 failures (mainline/v3.13-9240-g1329311)
by Olof's autobuilder
Here are the build results from automated periodic testing.
The tree being built was mainline, found at:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch)
Topmost commit:
1329311 Merge branch 'akpm' (patches from Andrew Morton)
Build logs (stderr only) can be found at the following link (experimental):
http://arm-soc.lixom.net/buildlogs/mainline/v3.13-9240-g1329311/
Runtime: 39m 0s
Passed: 122
Failed: 1
Warnings: 5
Section mismatches: 0
-------------------------------------------------------------------------------
Failed defconfigs:
tegra_defconfig
-------------------------------------------------------------------------------
Errors:
tegra_defconfig:
drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration]
Warnings:
1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable]
1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable]
1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable]
1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function]
1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function]
Section mismatches:
11 years, 4 months
- 1
- 0
queue boot: 35 pass, 0 fail (v3.12.9-5-gf7fccff)
by Kevin's boot bot
Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue
Git describe: v3.12.9-5-gf7fccff
Full Report
===========
omap2plus_defconfig
-------------------
am335x-boneblack PASS: 0 min 24.8 sec
omap3-beagle-xm PASS: 0 min 55.2 sec
am335x-bone PASS: 0 min 26.7 sec
omap4-panda PASS: 1 min 7.7 sec
omap4-panda-es PASS: 1 min 19.8 sec
omap3-tobi,3730storm PASS: 0 min 24.4 sec
omap3-tobi,3530overo PASS: 0 min 22.2 sec
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2 PASS: 0 min 13.3 sec
tegra_defconfig
---------------
tegra30-beaver PASS: 0 min 16.9 sec
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec
imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec
imx6q-wandboard PASS: 0 min 16.2 sec
bcm_defconfig
-------------
bcm28155-ap PASS: 0 min 58.9 sec
exynos_defconfig
----------------
exynos5250-arndale PASS: 0 min 29.7 sec
multi_v7_defconfig
------------------
ste-snowball PASS: 0 min 28.3 sec
tegra30-beaver PASS: 0 min 16.8 sec
am335x-boneblack PASS: 0 min 32.0 sec
omap3-beagle-xm PASS: 0 min 57.2 sec
sun7i-a20-cubieboard2 PASS: 0 min 13.7 sec
armada-370-mirabox PASS: 0 min 20.6 sec
omap4-panda PASS: 1 min 1.7 sec
omap4-panda-es PASS: 1 min 4.3 sec
armada-xp-openblocks-ax3-4 PASS: 0 min 22.8 sec
sun4i-a10-cubieboard PASS: 0 min 13.4 sec
bcm28155-ap PASS: 0 min 59.1 sec
imx6dl-wandboard,wand-solo PASS: 0 min 17.1 sec
am335x-bone PASS: 0 min 33.7 sec
imx6q-wandboard PASS: 0 min 16.4 sec
omap3-tobi,3730storm PASS: 0 min 23.1 sec
imx6dl-wandboard,wand-dual PASS: 0 min 17.0 sec
omap3-tobi,3530overo PASS: 0 min 20.2 sec
u8500_defconfig
---------------
ste-snowball PASS: 0 min 36.4 sec
sama5_defconfig
---------------
sama5d35ek PASS: 0 min 17.3 sec
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec
armada-370-mirabox PASS: 0 min 20.1 sec
11 years, 4 months
- 1
- 0
queue boot: 24 passed 2 failed (queue/v3.12.9-5-gf7fccff)
by Olof's autobooter
Failed boards:
bbb omap2plus_defconfig : FAILED 1:37.38
bbb multi_v7_defconfig : FAILED 1:32.41
Successful boards:
arndale exynos_defconfig : passed 1:11.58
beaver tegra_defconfig : passed 0:56.76
beaver multi_v7_defconfig : passed 0:39.69
capri bcm_defconfig : passed 0:42.39
capri multi_v7_defconfig : passed 0:42.25
cubie multi_v7_defconfig : passed 0:58.49
cubie2 multi_v7_defconfig : passed 0:53.20
cubie2 multi_lpae_defconfig : passed 0:57.26
cubox dove_defconfig : passed 0:55.07
dalmore tegra_defconfig : passed 1:22.08
dalmore multi_v7_defconfig : passed 1:03.41
dalmore multi_lpae_defconfig : passed 1:00.95
panda omap2plus_defconfig : passed 1:15.00
panda multi_v7_defconfig : passed 1:09.45
sama5 sama5_defconfig : passed 1:57.57
seaboard tegra_defconfig : passed 1:02.80
seaboard multi_v7_defconfig : passed 0:54.91
snow exynos_defconfig : passed 1:25.26
snowball u8500_defconfig : passed 2:16.23
snowball multi_v7_defconfig : passed 0:49.92
trimslice tegra_defconfig : passed 0:59.50
trimslice multi_v7_defconfig : passed 0:47.98
wandboard imx_v6_v7_defconfig : passed 0:56.29
wandboard multi_v7_defconfig : passed 0:48.78
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log:
-------------------------------------------------
[ 0.245225] RPC: Registered tcp transport module.
[ 0.245235] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.246011] mop500-uib: failed to get adapter i2c2
[ 0.262394] NFS: Registering the id_resolver key type
[ 0.262511] Key type id_resolver registered
[ 0.262526] Key type id_legacy registered
[ 0.262921] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.262942] io scheduler noop registered
[ 0.262954] io scheduler deadline registered
[ 0.263203] io scheduler cfq registered (default)
[ 0.264053] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.342164] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.344041] Serial: IMX driver
[ 0.345007] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[ 0.938028] console [ttyO0] enabled
[ 0.942847] serial: Freescale lpuart driver
[ 0.947623] [drm] Initialized drm 1.1.0 20060810
[ 0.954575] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.961518] ehci-platform: EHCI generic platform driver
[ 0.967147] ehci-omap: OMAP-EHCI Host Controller driver
[ 0.972778] ehci-orion: EHCI orion driver
[ 0.977092] SPEAr-ehci: EHCI SPEAr driver
[ 0.981445] tegra-ehci: Tegra EHCI driver
[ 0.986026] usbcore: registered new interface driver usb-storage
[ 0.993870] mousedev: PS/2 mouse device common for all mice
[ 1.001175] sdhci: Secure Digital Host Controller Interface driver
[ 1.007696] sdhci: Copyright(c) Pierre Ossman
[ 1.012748] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.019707] usbcore: registered new interface driver usbhid
[ 1.025630] usbhid: USB HID core driver
[ 1.030118] TCP: cubic registered
[ 1.034492] NET: Registered protocol family 10
[ 1.040323] sit: IPv6 over IPv4 tunneling driver
[ 1.046277] Key type dns_resolver registered
[ 1.051041] Registering SWP/SWPB emulation handler
[ 1.058243] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 1.064336] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.074427] Waiting for root device /dev/mmcblk0p2...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board bbb-omap2plus_defconfig failure log:
-------------------------------------------------
[ 1.825642] i2c /dev entries driver
[ 1.829897] Driver for 1-wire Dallas network protocol.
[ 1.842413] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 1.854912] of_get_named_gpio_flags exited with status 53
[ 1.860626] of_get_named_gpio_flags exited with status 54
[ 1.866536] of_get_named_gpio_flags exited with status 55
[ 1.872341] of_get_named_gpio_flags exited with status 56
[ 1.878068] of_get_named_gpio_flags exited with status 53
[ 1.886004] of_get_named_gpio_flags exited with status 54
[ 1.892902] of_get_named_gpio_flags exited with status 55
[ 1.899439] of_get_named_gpio_flags exited with status 56
[ 1.908259] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.917201] usbcore: registered new interface driver usbhid
[ 1.923269] usbhid: USB HID core driver
[ 1.929230] oprofile: no performance counters
[ 1.937222] oprofile: using timer interrupt.
[ 1.942918] TCP: cubic registered
[ 1.946422] Initializing XFRM netlink socket
[ 1.951056] NET: Registered protocol family 17
[ 1.955943] NET: Registered protocol family 15
[ 1.961241] Key type dns_resolver registered
[ 1.965968] ThumbEE CPU extension supported.
[ 1.992485] DCDC1: at 1500 mV
[ 1.998675] vdd_mpu: 925 <--> 1325 mV at 1100 mV
[ 2.007474] vdd_core: 925 <--> 1150 mV at 1100 mV
[ 2.015401] LDO1: at 1800 mV
[ 2.021265] LDO2: at 3300 mV
[ 2.028488] LDO3: 1800 mV
[ 2.034362] LDO4: at 3300 mV
[ 2.040271] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 2.046969] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 2.121932] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 2.128375] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 2.138493] libphy: 4a101000.mdio: probed
[ 2.142885] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 2.153098] Random MACID = c6:fc:cc:05:1f:25
[ 2.164151] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[ 2.178183] Waiting for root device /dev/mmcblk0p2...
~$off
# PYBOOT: Exception: timeout
11 years, 4 months
- 1
- 0
queue build: 17 warnings 0 failures (queue/v3.12.9-5-gf7fccff)
by Olof's autobuilder
Here are the build results from automated periodic testing.
The tree being built was queue, found at:
Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git
Topmost commit:
f7fccff powerpc/thp: Fix crash on mremap
Build logs (stderr only) can be found at the following link (experimental):
http://arm-soc.lixom.net/buildlogs/queue/v3.12.9-5-gf7fccff/
Runtime: 34m 7s
Passed: 117
Failed: 0
Warnings: 17
Section mismatches: 0
-------------------------------------------------------------------------------
Failed defconfigs:
-------------------------------------------------------------------------------
Errors:
Warnings:
1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=]
1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=]
1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=]
1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=]
1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=]
1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=]
1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=]
1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=]
1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=]
1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=]
1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=]
1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=]
1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=]
1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=]
1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function]
Section mismatches:
11 years, 4 months
- 1
- 0
next boot: 13 pass, 24 fail (next-20140129)
by Kevin's boot bot
Automated DT boot report for various ARM defconfigs.
Tree/Branch: next
Git describe: next-20140129
Failed boot tests (console logs at the end)
===========================================
omap4-panda: FAIL: omap2plus_defconfig
omap4-panda-es: FAIL: omap2plus_defconfig
omap3-tobi,3730storm: FAIL: omap2plus_defconfig
sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig
tegra30-beaver: FAIL: tegra_defconfig
imx6q-wandboard: FAIL: imx_v6_v7_defconfig
sun7i-a20-cubieboard2: FAIL: sunxi_defconfig
sun4i-a10-cubieboard: FAIL: sunxi_defconfig
exynos5250-arndale: FAIL: exynos_defconfig
ste-snowball: FAIL: multi_v7_defconfig
tegra30-beaver: FAIL: multi_v7_defconfig
sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig
armada-370-mirabox: FAIL: multi_v7_defconfig
omap4-panda: FAIL: multi_v7_defconfig
omap4-panda-es: FAIL: multi_v7_defconfig
armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig
sun4i-a10-cubieboard: FAIL: multi_v7_defconfig
bcm28155-ap: FAIL: multi_v7_defconfig
imx6q-wandboard: FAIL: multi_v7_defconfig
omap3-tobi,3730storm: FAIL: multi_v7_defconfig
imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig
ste-snowball: FAIL: u8500_defconfig
armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig
armada-370-mirabox: FAIL: mvebu_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
am335x-boneblack PASS: 0 min 25.7 sec
omap3-beagle-xm PASS: 1 min 2.7 sec
am335x-bone PASS: 0 min 27.7 sec
omap4-panda FAIL: 0 min 53.2 sec
omap4-panda-es FAIL: 1 min 0.2 sec
omap3-tobi,3730storm FAIL: 1 min 18.2 sec
omap3-tobi,3530overo PASS: 0 min 23.0 sec
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2 FAIL: 0 min 19.9 sec
tegra_defconfig
---------------
tegra30-beaver FAIL: 0 min 12.1 sec
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec
imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec
imx6q-wandboard FAIL: 0 min 21.1 sec
sunxi_defconfig
---------------
sun7i-a20-cubieboard2 FAIL: 0 min 17.8 sec
sun4i-a10-cubieboard FAIL: 0 min 22.1 sec
bcm_defconfig
-------------
bcm28155-ap PASS: 1 min 4.3 sec
exynos_defconfig
----------------
exynos5250-arndale FAIL: 0 min 33.9 sec
multi_v7_defconfig
------------------
ste-snowball FAIL: 0 min 30.4 sec
tegra30-beaver FAIL: 0 min 24.1 sec
am335x-boneblack PASS: 0 min 23.6 sec
omap3-beagle-xm PASS: 0 min 44.1 sec
sun7i-a20-cubieboard2 FAIL: 0 min 19.8 sec
armada-370-mirabox FAIL: 0 min 31.6 sec
omap4-panda FAIL: 1 min 0.5 sec
omap4-panda-es FAIL: 0 min 53.5 sec
armada-xp-openblocks-ax3-4 FAIL: 0 min 31.7 sec
sun4i-a10-cubieboard FAIL: 0 min 19.5 sec
bcm28155-ap FAIL: 16 min 18.1 sec
imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec
am335x-bone PASS: 0 min 31.3 sec
imx6q-wandboard FAIL: 0 min 20.4 sec
omap3-tobi,3730storm FAIL: 0 min 29.5 sec
imx6dl-wandboard,wand-dual FAIL: 0 min 22.4 sec
omap3-tobi,3530overo PASS: 0 min 21.4 sec
u8500_defconfig
---------------
ste-snowball FAIL: 0 min 28.3 sec
sama5_defconfig
---------------
sama5d35ek PASS: 0 min 17.6 sec
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec
armada-370-mirabox FAIL: 0 min 31.6 sec
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap4-panda: FAIL: last 24 lines of boot log:
---------------------------------------------
8.8 KiB/s
done
Bytes transferred = 50077 (c39d hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda #bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f0f39c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 53.22 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
------------------------------------------------
4.9 KiB/s
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 60.17 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log:
------------------------------------------------------
[ 6.063446] [<c0092fbc>] (handle_level_irq) from [<c008fc50>] (generic_handle_irq+0x28/0x3c)
[ 6.072326] [<c008fc50>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4)
[ 6.080688] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74)
[ 6.089324] [<c00085b4>] (omap3_intc_handle_irq) from [<c054c424>] (__irq_svc+0x44/0x5c)
[ 6.097839] Exception stack(0xde0efcd0 to 0xde0efd18)
[ 6.103179] fcc0: de312480 01003600 fa0b4000 00000000
[ 6.111816] fce0: de0efd2c de0efd3c de312000 00008002 de4b7746 de4b7740 de0efde6 00000000
[ 6.120422] fd00: 00000000 de0efd18 c044f728 c043879c 20000113 ffffffff
[ 6.127410] [<c054c424>] (__irq_svc) from [<c043879c>] (__mmc_start_req+0x54/0x84)
[ 6.135406] [<c043879c>] (__mmc_start_req) from [<c0438c3c>] (mmc_wait_for_cmd+0x58/0x88)
[ 6.144042] [<c0438c3c>] (mmc_wait_for_cmd) from [<c0442738>] (mmc_io_rw_direct_host+0xa4/0x13c)
[ 6.153289] [<c0442738>] (mmc_io_rw_direct_host) from [<c04434fc>] (sdio_read_cis+0x168/0x298)
[ 6.162384] [<c04434fc>] (sdio_read_cis) from [<c04419e0>] (mmc_sdio_init_card+0x3e0/0xaa4)
[ 6.171203] [<c04419e0>] (mmc_sdio_init_card) from [<c04423ac>] (mmc_attach_sdio+0x78/0x360)
[ 6.180084] [<c04423ac>] (mmc_attach_sdio) from [<c043aefc>] (mmc_rescan+0x260/0x2e8)
[ 6.188354] [<c043aefc>] (mmc_rescan) from [<c005917c>] (process_one_work+0x1ac/0x4c4)
[ 6.196716] [<c005917c>] (process_one_work) from [<c005a014>] (worker_thread+0x114/0x3b4)
[ 6.205352] [<c005a014>] (worker_thread) from [<c005fc08>] (kthread+0xcc/0xe8)
[ 6.212982] [<c005fc08>] (kthread) from [<c000e548>] (ret_from_fork+0x14/0x2c)
[ 6.220581] ---[ end trace b272c118119c9532 ]---
~$off
# PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'>
# PYBOOT: Time: 78.17 seconds.
# PYBOOT: Result: FAIL
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
-------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x442fe0 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.89 seconds.
# PYBOOT: Result: FAIL
tegra_defconfig
---------------
tegra30-beaver: FAIL: last 24 lines of boot log:
------------------------------------------------
[ 0.000000] r10: ffffffff r9 : ffffffff r8 : 3fefffc0
[ 0.000000] r7 : ffffffff r6 : 0000001c r5 : 00000040 r4 : 00000000
[ 0.000000] r3 : 00000000 r2 : 00000000 r1 : ffffffdc r0 : 3fefffc0
[ 0.000000] Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
[ 0.000000] Control: 10c5387d Table: 8000404a DAC: 00000015
[ 0.000000] Process swapper (pid: 0, stack limit = 0xc07cc240)
[ 0.000000] Stack: (0xc07cdef4 to 0xc07ce000)
[ 0.000000] dee0: c079ca18 ffffffff c001bad8
[ 0.000000] df00: ffffffff 00000000 c06b9a2c c07dfb78 00000000 ffffffff 0000001c c079cbec
[ 0.000000] df20: ffffffff c07d43f4 00080800 c0800000 ffff1000 000ae7f5 00001000 00000007
[ 0.000000] df40: 00000200 c07b7000 c07b7000 c07d43c8 c06b9a2c c07dfb78 c07d8e70 c081b680
[ 0.000000] df60: c085920c c078ffa8 ffffffff 10c5387d c07d8e70 c081b540 00000001 ffffffff
[ 0.000000] df80: c07cc000 00000000 c07d43c0 00000000 00000000 c0575f70 c06b85ac c081b540
[ 0.000000] dfa0: 00000001 ffffffff c07cc000 00000000 c07d43c0 00000000 00000000 c078d838
[ 0.000000] dfc0: 00000000 00000000 00000000 00000000 00000000 c07bad78 10c5387d c07d440c
[ 0.000000] dfe0: c07bad74 c07d8f80 8000406a 412fc099 00000000 80008074 00000000 00000000
[ 0.000000] Code: e3110020 18a0500c 18a0500c e3110010 (18a0500c)
[ 0.000000] ---[ end trace 3406ff24bd97382e ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
~$off
# PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address 3fefffc0
# PYBOOT: Time: 12.11 seconds.
# PYBOOT: Result: FAIL
imx_v6_v7_defconfig
-------------------
imx6q-wandboard: FAIL: last 24 lines of boot log:
-------------------------------------------------
Bytes transferred = 25751 (6497 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4e5598 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 11009496
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 21.06 seconds.
# PYBOOT: Result: FAIL
sunxi_defconfig
---------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
-------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1b0600 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 17.78 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1b0600 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.15 seconds.
# PYBOOT: Result: FAIL
exynos_defconfig
----------------
exynos5250-arndale: FAIL: last 24 lines of boot log:
----------------------------------------------------
tftp 0x407c0000 192.168.1.2:tmp/arndale-5f66Ht/exynos5250-arndale.dtb
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.167
Filename 'tmp/arndale-5f66Ht/exynos5250-arndale.dtb'.
Load address: 0x407c0000
Loading: *###
done
Bytes transferred = 33440 (82a0 hex)
ARNDALE5250 # printenv bootargs
printenv bootargs
bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
ARNDALE5250 # bootz 0x40800000 - 0x407c0000
bootz 0x40800000 - 0x407c0000
## Flattened Device Tree blob at 407c0000
Booting using the fdt blob at 0x407c0000
Using Device Tree in place at 407c0000, end 407cb29f
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 33.89 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 24 lines of boot log:
----------------------------------------------
#################################################################
##############################################
done
Bytes transferred = 4481577 (446229 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000
bootm 0x00800000
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4481513 Bytes = 4.3 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 30.39 seconds.
# PYBOOT: Result: FAIL
tegra30-beaver: FAIL: last 24 lines of boot log:
------------------------------------------------
Bytes transferred = 23808 (5d00 hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 debug earlyprintk
Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000
bootz 0x81000000 0x82000000 0x83000000
Kernel image @ 0x81000000 [ 0x000000 - 0x43d730 ]
## Loading init Ramdisk from Legacy Image at 82000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Using Device Tree in place at 83000000, end 83008cff
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 24.05 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
-------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x43d730 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.77 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.65 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 24 lines of boot log:
---------------------------------------------
6.8 KiB/s
done
Bytes transferred = 50077 (c39d hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f0f39c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 60.54 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
------------------------------------------------
9.8 KiB/s
done
Bytes transferred = 50489 (c539 hex)
Panda #printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda #bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 53.46 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.66 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x43d730 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.50 seconds.
# PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 24 lines of boot log:
---------------------------------------------
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__
_call(self.context, command, ignore_failure, timeout)
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call
context.run_command(cmd, failok=ignore_failure)
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command
rc = subprocess.check_call(command, **output_args)
File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
raise CalledProcessError(retcode, cmd)
CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124
<LAVA_DISPATCHER>2014-01-29 06:59:59 AM INFO: CriticalError
<LAVA_DISPATCHER>2014-01-29 06:59:59 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.).
ErrorMessage: Failed to boot test image.
Lava failed at action boot_linaro_image with error:Failed to boot test image.
Traceback (most recent call last):
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run
action.run(**params)
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run
raise CriticalError("Failed to boot test image.")
CriticalError: Failed to boot test image.
Reboot: capri ; ip9258 1 3 : ['off']
<LAVA_DISPATCHER>2014-01-29 06:59:59 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'}
<LAVA_DISPATCHER>2014-01-29 07:00:00 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/43529e90eedb303b1f0105f1fa1e35f8…
LBOOT: Result: FAIL
LBOOT: Time: 978.10 seconds.
imx6q-wandboard: FAIL: last 24 lines of boot log:
-------------------------------------------------
Bytes transferred = 25751 (6497 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x43d730 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 11009496
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.37 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log:
------------------------------------------------------
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/3730storm-2Hh3yG/omap3-tobi.dtb'.
Load address: 0x81f00000
Loading: *####
2.3 MiB/s
done
Bytes transferred = 56692 (dd74 hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz ${loadaddr} - 0x81f00000
bootz ${loadaddr} - 0x81f00000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Loading Device Tree to 8ffef000, end 8ffffd73 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 29.47 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log:
------------------------------------------------------------
1.4 MiB/s
done
Bytes transferred = 24398 (5f4e hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 11008f4d
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.41 seconds.
# PYBOOT: Result: FAIL
u8500_defconfig
---------------
ste-snowball: FAIL: last 24 lines of boot log:
----------------------------------------------
#################################################################
######
done
Bytes transferred = 2939089 (2cd8d1 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000
bootm 0x00800000
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2939025 Bytes = 2.8 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.31 seconds.
# PYBOOT: Result: FAIL
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.57 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.58 seconds.
# PYBOOT: Result: FAIL
11 years, 4 months
- 1
- 0
next boot: 7 passed 24 failed (next/next-20140129)
by Olof's autobooter
Failed boards:
arndale exynos_defconfig : FAILED 1:25.31
beaver tegra_defconfig : FAILED 0:24.58
beaver multi_v7_defconfig : FAILED 1:02.41
capri multi_v7_defconfig : FAILED 1:02.25
cubie sunxi_defconfig : FAILED 1:02.62
cubie multi_v7_defconfig : FAILED 1:01.57
cubie2 sunxi_defconfig : FAILED 1:00.60
cubie2 multi_v7_defconfig : FAILED 1:03.81
cubie2 multi_lpae_defconfig : FAILED 0:58.88
cubox dove_defconfig : FAILED 1:11.95
dalmore tegra_defconfig : FAILED 0:28.11
dalmore multi_v7_defconfig : FAILED 1:04.21
dalmore multi_lpae_defconfig : FAILED 1:04.41
panda omap2plus_defconfig : FAILED 1:13.99
panda multi_v7_defconfig : FAILED 1:15.30
seaboard tegra_defconfig : FAILED 0:28.54
seaboard multi_v7_defconfig : FAILED 1:04.88
snow exynos_defconfig : FAILED 1:11.53
snowball u8500_defconfig : FAILED 1:20.00
snowball multi_v7_defconfig : FAILED 1:17.66
trimslice tegra_defconfig : FAILED 1:07.32
trimslice multi_v7_defconfig : FAILED 1:03.96
wandboard imx_v6_v7_defconfig : FAILED 1:01.96
wandboard multi_v7_defconfig : FAILED 1:08.74
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:14.29
bbb omap2plus_defconfig : passed 1:35.93
bbb multi_v7_defconfig : passed 1:22.74
capri bcm_defconfig : passed 0:42.27
hummingboard imx_v6_v7_defconfig : warnings 1:18.54
hummingboard multi_v7_defconfig : passed 1:01.55
sama5 sama5_defconfig : passed 1:53.88
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-exynos_defconfig failure log:
-------------------------------------------------
Load address: 0x40800000
Loading: *#################################################################
#################################################################
###########################################################
done
Bytes transferred = 2762696 (2a27c8 hex)
ARNDALE5250 # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
ARNDALE5250 # tftp 0x407c0000 next/next-20140129/exynos_defconfig/dtbs/exynos5250-arndale.dtb
tftp 0x407c0000 next/next-20140129/exynos_defconfig/dtbs/exynos5250-arndale.dtb
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.176
Filename 'next/next-20140129/exynos_defconfig/dtbs/exynos5250-arndale.dtb'.
Load address: 0x407c0000
Loading: *###
done
Bytes transferred = 33440 (82a0 hex)
ARNDALE5250 # printenv bootargs
printenv bootargs
bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw
ARNDALE5250 # bootm 0x40800000 - 0x407c0000
bootm 0x40800000 - 0x407c0000
## Booting kernel from Legacy Image at 40800000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2762632 Bytes = 2.6 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 407c0000
Booting using the fdt blob at 0x407c0000
Loading Kernel Image ... OK
OK
Loading Device Tree to 4fff4000, end 4ffff29f ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log:
-------------------------------------------------
Tegra30 (Beaver) # tftp 0x82000000 next/next-20140129/multi_v7_defconfig/zImage
tftp 0x82000000 next/next-20140129/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'next/next-20140129/multi_v7_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
###########################################
3 MiB/s
done
Bytes transferred = 4446000 (43d730 hex)
Tegra30 (Beaver) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra30 (Beaver) # tftp 0x83000000 next/next-20140129/multi_v7_defconfig/dtbs/tegra30-beaver.dtb
tftp 0x83000000 next/next-20140129/multi_v7_defconfig/dtbs/tegra30-beaver.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'next/next-20140129/multi_v7_defconfig/dtbs/tegra30-beaver.dtb'.
Load address: 0x83000000
Loading: *##
2.5 MiB/s
done
Bytes transferred = 23808 (5d00 hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait
Tegra30 (Beaver) #bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x43d730 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to 8fff7000, end 8ffffcff ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board beaver-tegra_defconfig failure log:
-------------------------------------------------
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 524032
[ 0.000000] free_area_init_node: node 0, pgdat c0819dc0, node_mem_map ed7f0000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2574 pages used for memmap
[ 0.000000] HighMem zone: 329472 pages, LIFO batch:31
[ 0.000000] Unable to handle kernel paging request at virtual address 3fefffc0
[ 0.000000] pgd = c0004000
[ 0.000000] [3fefffc0] *pgd=00000000
[ 0.000000] Internal error: Oops: 805 [#1] PREEMPT SMP ARM
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-next-20140129 #1
[ 0.000000] task: c07d7da0 ti: c07cc000 task.ti: c07cc000
[ 0.000000] PC is at __memzero+0x4c/0x80
[ 0.000000] LR is at 0x0
[ 0.000000] pc : [<c01ffb0c>] lr : [<00000000>] psr: 000001d3
[ 0.000000] sp : c07cdef4 ip : 00000000 fp : 80000200
[ 0.000000] r10: ffffffff r9 : ffffffff r8 : 3fefffc0
[ 0.000000] r7 : ffffffff r6 : 0000001c r5 : 00000040 r4 : 00000000
[ 0.000000] r3 : 00000000 r2 : 00000000 r1 : ffffffdc r0 : 3fefffc0
[ 0.000000] Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
[ 0.000000] Control: 10c5387d Table: 8000404a DAC: 00000015
[ 0.000000] Process swapper (pid: 0, stack limit = 0xc07cc240)
[ 0.000000] Stack: (0xc07cdef4 to 0xc07ce000)
[ 0.000000] dee0: c079ca18 ffffffff c001bad8
[ 0.000000] df00: ffffffff 00000000 c06b9a2c c07dfb78 00000000 ffffffff 0000001c c079cbec
[ 0.000000] df20: ffffffff c07d43f4 00080800 c0800000 ffff1000 000ae7f5 00001000 00000007
[ 0.000000] df40: 00000200 c07b7000 c07b7000 c07d43c8 c06b9a2c c07dfb78 c07d8e70 c081b680
[ 0.000000] df60: c085920c c078ffa8 ffffffff 10c5387d c07d8e70 c081b540 00000001 ffffffff
[ 0.000000] df80: c07cc000 00000000 c07d43c0 00000000 00000000 c0575f70 c06b85ac c081b540
[ 0.000000] dfa0: 00000001 ffffffff c07cc000 00000000 c07d43c0 00000000 00000000 c078d838
[ 0.000000] dfc0: 00000000 00000000 00000000 00000000 00000000 c07bad78 10c5387d c07d440c
[ 0.000000] dfe0: c07bad74 c07d8f80 8000406a 412fc099 00000000 80008074 00000000 00000000
[ 0.000000] Code: e3110020 18a0500c 18a0500c e3110010 (18a0500c)
[ 0.000000] ---[ end trace 3406ff24bd97382e ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
~$off
# PYBOOT: Exception: panic
========================================================================
Board capri-multi_v7_defconfig failure log:
-------------------------------------------------
(user:build) Load fastboot kernel
GET_DESC ->STRING DESC
sending 'kernel' (4341 KB)...
................................................................................
.......................................................OKAY [ 0.940s]
writing 'kernel'...
downloading of 4446000 bytes finished
Flashing Raw Image
Writing to partition 'kernel'
Writing 'kernOKAY [ 0.814s]
finished. total time: 1.754s
el' DONE!
GET_DESC ->STRING DESC
sending 'device-tree' (5 KB)...
OKAY [ 0.003s]
dowwriting 'device-tree'...
nloading of 5720 bytes finished
Flashing Raw Image
Writing to partition 'device-tree'
Writing 'device-tree' DONOKAY [ 0.010s]
finished. total time: 0.015s
E!
GET_DESC ->STRING DESC
resuming boot...
OKAY [ 0.000s]
finished. total time: 0.000s
MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK
MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK
## Flattened Device Tree blob at 9e000000
Booting using the fdt blob at 0x9e000000
Using Device Tree in place at 9e000000, end 9e004657
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log:
-------------------------------------------------
tftp 0x40008000 next/next-20140129/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'next/next-20140129/multi_v7_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
#################################################################
#################################################################
######################################################node: cubie status: on
###########
###########################################
2.7 MiB/s
done
Bytes transferred = 4446000 (43d730 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x41000000 next/next-20140129/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x41000000 next/next-20140129/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'next/next-20140129/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
482.4 KiB/s
done
Bytes transferred = 10869 (2a75 hex)
sun4i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x43d730 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log:
-------------------------------------------------
DHCP client bound to address 172.16.1.154
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x40008000 next/next-20140129/sunxi_defconfig/zImage
tftp 0x40008000 next/next-20140129/sunxi_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'next/next-20140129/sunxi_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
########################################################
2.5 MiB/s
done
Bytes transferred = 1771008 (1b0600 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x41000000 next/next-20140129/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x41000000 next/next-20140129/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'next/next-20140129/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
392.6 KiB/s
done
Bytes transferred = 10869 (2a75 hex)
sun4i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1b0600 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log:
-------------------------------------------------
sun7i# tftp 0x40008000 next/next-20140129/multi_lpae_defconfig/zImage
tftp 0x40008000 next/next-20140129/multi_lpae_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'next/next-20140129/multi_lpae_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#############################################
3.7 MiB/s
done
Bytes transferred = 4468704 (442fe0 hex)
sun7i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 next/next-20140129/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 next/next-20140129/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'next/next-20140129/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
542 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x442fe0 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log:
-------------------------------------------------
tftp 0x40008000 next/next-20140129/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'next/next-20140129/multi_v7_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
###########################################
4 MiB/s
done
Bytes transferred = 4446000 (43d730 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 next/next-20140129/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 next/next-20140129/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'next/next-20140129/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
662.1 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x43d730 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
node: cubie2 status: on
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log:
-------------------------------------------------
DHCP client bound to address 172.16.1.171
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x40008000 next/next-20140129/sunxi_defconfig/zImage
tftp 0x40008000 next/next-20140129/sunxi_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'next/next-20140129/sunxi_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
########################################################
4 MiB/s
done
Bytes transferred = 1771008 (1b0600 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 next/next-20140129/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 next/next-20140129/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'next/next-20140129/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
411.1 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1b0600 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubox-dove_defconfig failure log:
-------------------------------------------------
CuBox>> dhcp
dhcp
Unknown command 'dhcp' - try 'help'
CuBox>> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
CuBox>> tftp 0x02000000 tmp/cubox-_ShTqL/tmpNth_20-uImage
tftp 0x02000000 tmp/cubox-_ShTqL/tmpNth_20-uImage
Using egiga0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.183
Filename 'tmp/cubox-_ShTqL/tmpNth_20-uImage'.
Load address: 0x2000000
Loading: *#################################################################
#################################################################
##############################################################
done
Bytes transferred = 2811127 (2ae4f7 hex)
CuBox>> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
CuBox>> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
CuBox>> bootm 0x02000000
bootm 0x02000000
## Booting kernel from Legacy Image at 02000000 ...
Image Name: Linux
Created: 2014-01-29 6:09:26 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2811063 Bytes = 2.7 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... node: cubox status: on
OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log:
-------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140129/multi_lpae_defconfig/zImage
tftp 0x82000000 next/next-20140129/multi_lpae_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'next/next-20140129/multi_lpae_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#############################################
2.8 MiB/s
done
Bytes transferred = 4468704 (442fe0 hex)
Tegra114 (Dalmore) #setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140129/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb
tftp 0x83000000 next/next-20140129/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'next/next-20140129/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'.
Load address: 0x83000000
Loading: *###
1005.9 KiB/s
done
Bytes transferred = 34015 (84df hex)
Tegra114 (Dalmore) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk
Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x442fe0 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to 8fff4000, end 8ffff4de ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log:
-------------------------------------------------
Tegra114 (Dalmore) # tftp 0x82000000 next/next-20140129/multi_v7_defconfig/zImage
tftp 0x82000000 next/next-20140129/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'next/next-20140129/multi_v7_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
###########################################
2.9 MiB/s
done
Bytes transferred = 4446000 (43d730 hex)
Tegra114 (Dalmore) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x83000000 next/next-20140129/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb
tftp 0x83000000 next/next-20140129/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'next/next-20140129/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'.
Load address: 0x83000000
Loading: *###
790 KiB/s
done
Bytes transferred = 34015 (84df hex)
Tegra114 (Dalmore) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk
Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x43d730 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to 8fff4000, end 8ffff4de ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-tegra_defconfig failure log:
-------------------------------------------------
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 524032
[ 0.000000] free_area_init_node: node 0, pgdat c0819dc0, node_mem_map ed7f0000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2574 pages used for memmap
[ 0.000000] HighMem zone: 329472 pages, LIFO batch:31
[ 0.000000] Unable to handle kernel paging request at virtual address 3fefffc0
[ 0.000000] pgd = c0004000
[ 0.000000] [3fefffc0] *pgd=00000000
[ 0.000000] Internal error: Oops: 805 [#1] PREEMPT SMP ARM
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-next-20140129 #1
[ 0.000000] task: c07d7da0 ti: c07cc000 task.ti: c07cc000
[ 0.000000] PC is at __memzero+0x4c/0x80
[ 0.000000] LR is at 0x0
[ 0.000000] pc : [<c01ffb0c>] lr : [<00000000>] psr: 000001d3
[ 0.000000] sp : c07cdef4 ip : 00000000 fp : 80000200
[ 0.000000] r10: ffffffff r9 : ffffffff r8 : 3fefffc0
[ 0.000000] r7 : ffffffff r6 : 0000001c r5 : 00000040 r4 : 00000000
[ 0.000000] r3 : 00000000 r2 : 00000000 r1 : ffffffdc r0 : 3fefffc0
[ 0.000000] Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
[ 0.000000] Control: 10c5387d Table: 8000406a DAC: 00000015
[ 0.000000] Process swapper (pid: 0, stack limit = 0xc07cc240)
[ 0.000000] Stack: (0xc07cdef4 to 0xc07ce000)
[ 0.000000] dee0: c079ca18 ffffffff c001bad8
[ 0.000000] df00: ffffffff 00000000 c06b9a2c c07dfb78 00000000 ffffffff 0000001c c079cbec
[ 0.000000] df20: ffffffff c07d43f4 00080800 c0800000 ffff1000 000ae7f5 00001000 00000007
[ 0.000000] df40: 00000200 c07b7000 c07b7000 c07d43c8 c06b9a2c c07dfb78 c07d8e70 c081b680
[ 0.000000] df60: c085920c c078ffa8 ffffffff 10c5387d c07d8e70 c081b540 00000001 ffffffff
[ 0.000000] df80: c07cc000 00000000 c07d43c0 00000000 00000000 c0575f70 c06b85ac c081b540
[ 0.000000] dfa0: 00000001 ffffffff c07cc000 00000000 c07d43c0 00000000 00000000 c078d838
[ 0.000000] dfc0: 00000000 00000000 00000000 00000000 00000000 c07bad78 10c5387d c07d440c
[ 0.000000] dfe0: c07bad74 c07d8f80 8000406a 412fc0f2 00000000 80008074 00000000 00000000
[ 0.000000] Code: e3110020 18a0500c 18a0500c e3110010 (18a0500c)
[ 0.000000] ---[ end trace 3406ff24bd97382e ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
~$off
# PYBOOT: Exception: panic
========================================================================
Board panda-multi_v7_defconfig failure log:
-------------------------------------------------
#################################################################
#################################################################
#################################################################
###########################################
done
Bytes transferred = 4446064 (43d770 hex)
Panda # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Panda # tftp 0x81f00000 next/next-20140129/multi_v7_defconfig/dtbs/omap4-panda-es.dtb
tftp 0x81f00000 next/next-20140129/multi_v7_defconfig/dtbs/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.182
Filename 'next/next-20140129/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *####
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
Panda #bootm 0x82000000 - 0x81f00000
bootm 0x82000000 - 0x81f00000
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4446000 Bytes = 4.2 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Loading Kernel Image ... OK
OK
Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-omap2plus_defconfig failure log:
-------------------------------------------------
#################################################################
#################################################################
#################################################################
#################################
done
Bytes transferred = 4286728 (416908 hex)
Panda # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Panda # tftp 0x81f00000 next/next-20140129/omap2plus_defconfig/dtbs/omap4-panda-es.dtb
tftp 0x81f00000 next/next-20140129/omap2plus_defconfig/dtbs/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.182
Filename 'next/next-20140129/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *####
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
Panda # bootm 0x82000000 - 0x81f00000
bootm 0x82000000 - 0x81f00000
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4286664 Bytes = 4.1 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Loading Kernel Image ... OK
OK
Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log:
-------------------------------------------------
Tegra20 (SeaBoard) # tftp 0x800000 next/next-20140129/multi_v7_defconfig/zImage
tftp 0x800000 next/next-20140129/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.101
Filename 'next/next-20140129/multi_v7_defconfig/zImage'.
Load address: 0x800000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
###########################################
2.8 MiB/s
done
Bytes transferred = 4446000 (43d730 hex)
Tegra20 (SeaBoard) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra20 (SeaBoard) # tftp 0x1800000 next/next-20140129/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb
tftp 0x1800000 next/next-20140129/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.101
Filename 'next/next-20140129/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb'.
Load address: 0x1800000
Loading: *##
467.8 KiB/s
done
Bytes transferred = 25391 (632f hex)
Tegra20 (SeaBoard) # printenv bootargs
printenv bootargs
bootargs=root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk
Tegra20 (SeaBoard) #bootz 0x800000 - 0x1800000
bootz 0x800000 - 0x1800000
Kernel image @ 0x800000 [ 0x000000 - 0x43d730 ]
## Flattened Device Tree blob at 01800000
Booting using the fdt blob at 0x1800000
Loading Device Tree to 0fff6000, end 0ffff32e ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board seaboard-tegra_defconfig failure log:
-------------------------------------------------
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c0819dc0, node_mem_map edff0000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 528 pages used for memmap
[ 0.000000] HighMem zone: 67584 pages, LIFO batch:15
[ 0.000000] Unable to handle kernel paging request at virtual address ffffffc0
[ 0.000000] pgd = c0004000
[ 0.000000] [ffffffc0] *pgd=2e7f6821, *pte=00000000, *ppte=00000000
[ 0.000000] Internal error: Oops: 817 [#1] PREEMPT SMP ARM
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-next-20140129 #1
[ 0.000000] task: c07d7da0 ti: c07cc000 task.ti: c07cc000
[ 0.000000] PC is at __memzero+0x4c/0x80
[ 0.000000] LR is at 0x0
[ 0.000000] pc : [<c01ffb0c>] lr : [<00000000>] psr: 000001d3
[ 0.000000] sp : c07cdef4 ip : 00000000 fp : 80000200
[ 0.000000] r10: ffffffff r9 : ffffffff r8 : ffffffc0
[ 0.000000] r7 : ffffffff r6 : 0000001c r5 : 00000040 r4 : 00000000
[ 0.000000] r3 : 00000000 r2 : 00000000 r1 : ffffffdc r0 : ffffffc0
[ 0.000000] Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
[ 0.000000] Control: 10c5387d Table: 0000404a DAC: 00000015
[ 0.000000] Process swapper (pid: 0, stack limit = 0xc07cc240)
[ 0.000000] Stack: (0xc07cdef4 to 0xc07ce000)
[ 0.000000] dee0: c079ca18 ffffffff c001bad8
[ 0.000000] df00: ffffffff 00000000 c06b9a2c c07dfb78 00000000 ffffffff 0000001c c079cbec
[ 0.000000] df20: ffffffff c07d43f4 00000800 c0800000 ffff1000 0002e7f5 00001000 00000007
[ 0.000000] df40: 00000200 c07b7000 c07b7000 c07d43c8 c06b9a2c c07dfb78 c07d8e70 c081b680
[ 0.000000] df60: c085920c c078ffa8 ffffffff 10c5387d c07d8e70 c081b540 00000001 ffffffff
[ 0.000000] df80: c07cc000 00000000 c07d43c0 00000000 00000000 c0575f70 c06b85ac c081b540
[ 0.000000] dfa0: 00000001 ffffffff c07cc000 00000000 c07d43c0 00000000 00000000 c078d838
[ 0.000000] dfc0: 00000000 00000000 00000000 00000000 00000000 c07bad78 10c5387d c07d440c
[ 0.000000] dfe0: c07bad74 c07d8f80 0000406a 411fc090 00000000 00008074 00000000 00000000
[ 0.000000] Code: e3110020 18a0500c 18a0500c e3110010 (18a0500c)
[ 0.000000] ---[ end trace 3406ff24bd97382e ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
~$off
# PYBOOT: Exception: panic
========================================================================
Board snow-exynos_defconfig failure log:
-------------------------------------------------
OK
Loading Device Tree to 5fff0000, end 5ffff7f8 ... OK
Starting kernel ...
Timer summary in microseconds:
Mark Elapsed Stage
0 0 reset
100,000 100,000 spl_start
1,681,368 1,581,368 board_init_f
1,731,191 49,823 board_init_r
1,733,396 2,205 board_init
1,864,104 130,708 board_init_done
1,946,394 82,290 id=64
1,951,815 5,421 main_loop
3,884,833 1,933,018 usb_start
8,565,476 4,680,643 tftp_start
8,565,493 17 id=80
8,565,495 2 eth_start
12,395,530 3,830,035 id=81
12,395,615 85 id=82
12,395,620 5 id=84
12,395,621 1 tftp_done
19,471,657 7,076,036 bootm_start
19,471,665 8 id=1
19,551,620 79,955 id=2
19,551,639 19 id=3
20,333,425 781,786 id=4
20,333,427 2 id=5
20,333,439 12 id=6
21,056,779 723,340 id=7
21,056,782 3 id=8
21,056,796 14 id=15
21,625,163 568,367 start_kernel
Accumulated time:
154,039 lcd
Stashed 27 records
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log:
-------------------------------------------------
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.138
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-vMsK4z/tmpxI4asV-uImage
tftp 0x00100000 tmp/snowball-vMsK4z/tmpxI4asV-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.138
Filename 'tmp/snowball-vMsK4z/tmpxI4asV-uImage'.
Load address: 0x100000
Loading: *#####################T ############################################
#################################################################
#################################################################
########################T #########################################
##############################################
done
Bytes transferred = 4481577 (446229 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000
bootm 0x00100000
## Booting kernel from Legacy Image at 00100000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4481513 Bytes = 4.3 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log:
-------------------------------------------------
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.138
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-qn5NCV/tmp7K_b9N-uImage
tftp 0x00100000 tmp/snowball-qn5NCV/tmp7K_b9N-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.138
Filename 'tmp/snowball-qn5NCV/tmp7K_b9N-uImage'.
Load address: 0x100000
Loading: *#############################################################node: snowball status: on
####
#################################################################
#################################################################
######
done
Bytes transferred = 2939089 (2cd8d1 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000
bootm 0x00100000
## Booting kernel from Legacy Image at 00100000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2939025 Bytes = 2.8 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log:
-------------------------------------------------
Tegra20 (TrimSlice) # tftp 0x800000 next/next-20140129/multi_v7_defconfig/zImage
tftp 0x800000 next/next-20140129/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'next/next-20140129/multi_v7_defconfig/zImage'.
Load address: 0x800000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
###########################################
2.9 MiB/s
done
Bytes transferred = 4446000 (43d730 hex)
Tegra20 (TrimSlice) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra20 (TrimSlice) # tftp 0x1800000 next/next-20140129/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb
tftp 0x1800000 next/next-20140129/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'next/next-20140129/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb'.
Load address: 0x1800000
Loading: *##
940.4 KiB/s
done
Bytes transferred = 20236 (4f0c hex)
Tegra20 (TrimSlice) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw
Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000
bootz 0x800000 - 0x1800000
Kernel image @ 0x800000 [ 0x000000 - 0x43d730 ]
## Flattened Device Tree blob at 01800000
Booting using the fdt blob at 0x1800000
Loading Device Tree to 0fff8000, end 0fffff0b ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board trimslice-tegra_defconfig failure log:
-------------------------------------------------
tftp 0x800000 next/next-20140129/tegra_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'next/next-20140129/tegra_defconfig/zImage'.
Load address: 0x800000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#########################
2.8 MiB/s
done
Bytes transferred = 4169368 (3f9e98 hex)
Tegra20 (TrimSlice) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra20 (TrimSlice) # tftp 0x1800000 next/next-20140129/tegra_defconfig/dtbs/tegra20-trimslice.dtb
tftp 0x1800000 next/next-20140129/tegra_defconfig/dtbs/tegra20-trimslice.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'next/next-20140129/tegra_defconfig/dtbs/tegra20-trimslice.dtb'.
Load address: 0x1800000
Loading: *##
581.1 KiB/s
done
Bytes transferred = 20236 (4f0c hex)
Tegra20 (TrimSlice) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw
Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000
bootz 0x800000 - 0x1800000
Kernel image @ 0x800000 [ 0x000000 - 0x3f9e98 ]
## Flattened Device Tree blob at 01800000
Booting using the fdt blob at 0x1800000
Loading Device Tree to 0fff8000, end 0fffff0b ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log:
-------------------------------------------------
tftp 0x10800000 next/next-20140129/imx_v6_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'next/next-20140129/imx_v6_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#########################
5.8 MiB/s
done
Bytes transferred = 5133720 (4e5598 hex)
=> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
=> tftp 0x11000000 next/next-20140129/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb
tftp 0x11000000 next/next-20140129/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'next/next-20140129/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
1.4 MiB/s
done
Bytes transferred = 25751 (6497 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4e5598 ]
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 11009496
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log:
-------------------------------------------------
tftp 0x10800000 next/next-20140129/multi_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'next/next-20140129/multi_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
###########################################
6.3 MiB/s
done
Bytes transferred = 4446000 (43d730 hex)
=> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
=> tftp 0x11000000 next/next-20140129/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
tftp 0x11000000 next/next-20140129/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'next/next-20140129/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *##
571.3 KiB/s
done
Bytes transferred = 25751 (6497 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz node: wandboard status: on
0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x43d730 ]
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 11009496
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
11 years, 4 months
- 1
- 0
next build: 6 warnings 0 failures (next/next-20140129)
by Olof's autobuilder
Here are the build results from automated periodic testing.
The tree being built was next, found at:
http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch)
Topmost commit:
21b881d Add linux-next specific files for 20140129
Build logs (stderr only) can be found at the following link (experimental):
http://arm-soc.lixom.net/buildlogs/next/next-20140129/
Runtime: 38m 53s
Passed: 123
Failed: 0
Warnings: 6
Section mismatches: 0
-------------------------------------------------------------------------------
Failed defconfigs:
-------------------------------------------------------------------------------
Errors:
Warnings:
1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function]
1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function]
2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL)
2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL)
Section mismatches:
11 years, 4 months
- 1
- 0
mainline boot: 13 pass, 23 fail (v3.13-9218-g0e47c96)
by Kevin's boot bot
Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline
Git describe: v3.13-9218-g0e47c96
Failed boot tests (console logs at the end)
===========================================
omap4-panda: FAIL: omap2plus_defconfig
omap4-panda-es: FAIL: omap2plus_defconfig
omap3-tobi,3730storm: FAIL: omap2plus_defconfig
sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig
imx6q-wandboard: FAIL: imx_v6_v7_defconfig
sun7i-a20-cubieboard2: FAIL: sunxi_defconfig
sun4i-a10-cubieboard: FAIL: sunxi_defconfig
exynos5250-arndale: FAIL: exynos_defconfig
ste-snowball: FAIL: multi_v7_defconfig
tegra30-beaver: FAIL: multi_v7_defconfig
sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig
armada-370-mirabox: FAIL: multi_v7_defconfig
omap4-panda: FAIL: multi_v7_defconfig
omap4-panda-es: FAIL: multi_v7_defconfig
armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig
sun4i-a10-cubieboard: FAIL: multi_v7_defconfig
bcm28155-ap: FAIL: multi_v7_defconfig
imx6q-wandboard: FAIL: multi_v7_defconfig
omap3-tobi,3730storm: FAIL: multi_v7_defconfig
imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig
ste-snowball: FAIL: u8500_defconfig
armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig
armada-370-mirabox: FAIL: mvebu_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
am335x-boneblack PASS: 0 min 25.8 sec
omap3-beagle-xm PASS: 1 min 0.5 sec
am335x-bone PASS: 0 min 32.4 sec
omap4-panda FAIL: 0 min 53.8 sec
omap4-panda-es FAIL: 0 min 55.2 sec
omap3-tobi,3730storm FAIL: 1 min 20.6 sec
omap3-tobi,3530overo PASS: 0 min 23.2 sec
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2 FAIL: 0 min 19.6 sec
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec
imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec
imx6q-wandboard FAIL: 0 min 21.0 sec
sunxi_defconfig
---------------
sun7i-a20-cubieboard2 FAIL: 0 min 17.7 sec
sun4i-a10-cubieboard FAIL: 0 min 22.2 sec
bcm_defconfig
-------------
bcm28155-ap PASS: 1 min 4.1 sec
exynos_defconfig
----------------
exynos5250-arndale FAIL: 0 min 42.8 sec
multi_v7_defconfig
------------------
ste-snowball FAIL: 0 min 29.1 sec
tegra30-beaver FAIL: 0 min 24.6 sec
am335x-boneblack PASS: 0 min 22.5 sec
omap3-beagle-xm PASS: 0 min 58.3 sec
sun7i-a20-cubieboard2 FAIL: 0 min 19.1 sec
armada-370-mirabox FAIL: 0 min 31.6 sec
omap4-panda FAIL: 0 min 55.5 sec
omap4-panda-es FAIL: 0 min 57.2 sec
armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec
sun4i-a10-cubieboard FAIL: 0 min 19.2 sec
bcm28155-ap FAIL: 16 min 12.4 sec
imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec
am335x-bone PASS: 0 min 25.4 sec
imx6q-wandboard FAIL: 0 min 20.4 sec
omap3-tobi,3730storm FAIL: 0 min 25.6 sec
imx6dl-wandboard,wand-dual FAIL: 0 min 21.8 sec
omap3-tobi,3530overo PASS: 0 min 20.9 sec
u8500_defconfig
---------------
ste-snowball FAIL: 0 min 28.4 sec
sama5_defconfig
---------------
sama5d35ek PASS: 0 min 17.6 sec
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec
armada-370-mirabox FAIL: 0 min 31.6 sec
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap4-panda: FAIL: last 24 lines of boot log:
---------------------------------------------
8.8 KiB/s
done
Bytes transferred = 50077 (c39d hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f0f39c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 53.84 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
------------------------------------------------
8.8 KiB/s
done
Bytes transferred = 50489 (c539 hex)
Panda #printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 55.22 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log:
------------------------------------------------------
[ 5.981292] [<c008fb68>] (generic_handle_irq) from [<c000eda8>] (handle_IRQ+0x4c/0xb4)
[ 5.989654] [<c000eda8>] (handle_IRQ) from [<c00085b4>] (omap3_intc_handle_irq+0x60/0x74)
[ 5.998291] [<c00085b4>] (omap3_intc_handle_irq) from [<c0548ba4>] (__irq_svc+0x44/0x5c)
[ 6.006805] Exception stack(0xde0efcc0 to 0xde0efd08)
[ 6.012145] fcc0: de4b5480 01000200 fa0b4000 34020001 de0efd2c de4b5000 de4b5000 00008000
[ 6.020782] fce0: 00000000 de0efe22 de0efde6 00000000 00000000 de0efd08 c044dea0 c0436dd0
[ 6.029388] fd00: 20000113 ffffffff
[ 6.033081] [<c0548ba4>] (__irq_svc) from [<c0436dd0>] (mmc_start_request+0xb8/0xd4)
[ 6.041259] [<c0436dd0>] (mmc_start_request) from [<c0436ef8>] (__mmc_start_req+0x54/0x84)
[ 6.049987] [<c0436ef8>] (__mmc_start_req) from [<c0437398>] (mmc_wait_for_cmd+0x58/0x88)
[ 6.058624] [<c0437398>] (mmc_wait_for_cmd) from [<c0440ed0>] (mmc_io_rw_direct_host+0xa4/0x13c)
[ 6.067901] [<c0440ed0>] (mmc_io_rw_direct_host) from [<c0441c24>] (sdio_read_cis+0xf8/0x298)
[ 6.076873] [<c0441c24>] (sdio_read_cis) from [<c0440178>] (mmc_sdio_init_card+0x3e0/0xaa4)
[ 6.085693] [<c0440178>] (mmc_sdio_init_card) from [<c0440b44>] (mmc_attach_sdio+0x78/0x360)
[ 6.094604] [<c0440b44>] (mmc_attach_sdio) from [<c04396b0>] (mmc_rescan+0x260/0x2e8)
[ 6.102874] [<c04396b0>] (mmc_rescan) from [<c00590b8>] (process_one_work+0x1ac/0x4c4)
[ 6.111206] [<c00590b8>] (process_one_work) from [<c0059f50>] (worker_thread+0x114/0x3b4)
[ 6.119842] [<c0059f50>] (worker_thread) from [<c005fb44>] (kthread+0xcc/0xe8)
[ 6.127471] [<c005fb44>] (kthread) from [<c000e548>] (ret_from_fork+0x14/0x2c)
[ 6.135101] ---[ end trace 5e135e108bd4ff07 ]---
~$off
# PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'>
# PYBOOT: Time: 80.60 seconds.
# PYBOOT: Result: FAIL
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
-------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3877d0 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.60 seconds.
# PYBOOT: Result: FAIL
imx_v6_v7_defconfig
-------------------
imx6q-wandboard: FAIL: last 24 lines of boot log:
-------------------------------------------------
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4c4e50 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 21.01 seconds.
# PYBOOT: Result: FAIL
sunxi_defconfig
---------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
-------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af970 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 17.74 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af970 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.20 seconds.
# PYBOOT: Result: FAIL
exynos_defconfig
----------------
exynos5250-arndale: FAIL: last 24 lines of boot log:
----------------------------------------------------
tftp 0x407c0000 192.168.1.2:tmp/arndale-BTrjmE/exynos5250-arndale.dtb
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.167
Filename 'tmp/arndale-BTrjmE/exynos5250-arndale.dtb'.
Load address: 0x407c0000
Loading: *###
done
Bytes transferred = 33440 (82a0 hex)
ARNDALE5250 #printenv bootargs
printenv bootargs
bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
ARNDALE5250 # bootz 0x40800000 - 0x407c0000
bootz 0x40800000 - 0x407c0000
## Flattened Device Tree blob at 407c0000
Booting using the fdt blob at 0x407c0000
Using Device Tree in place at 407c0000, end 407cb29f
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 42.81 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 24 lines of boot log:
----------------------------------------------
#################################################################
###########################################################
done
Bytes transferred = 3716481 (38b581 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000
bootm 0x00800000
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3716417 Bytes = 3.5 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 29.13 seconds.
# PYBOOT: Result: FAIL
tegra30-beaver: FAIL: last 24 lines of boot log:
------------------------------------------------
Bytes transferred = 23808 (5d00 hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 debug earlyprintk
Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000
bootz 0x81000000 0x82000000 0x83000000
Kernel image @ 0x81000000 [ 0x000000 - 0x382a88 ]
## Loading init Ramdisk from Legacy Image at 82000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Using Device Tree in place at 83000000, end 83008cff
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 24.60 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
-------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x382a88 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.15 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.61 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 24 lines of boot log:
---------------------------------------------
8.8 KiB/s
done
Bytes transferred = 50077 (c39d hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f0f39c
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 55.52 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
------------------------------------------------
9.8 KiB/s
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 57.19 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.63 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x382a88 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.20 seconds.
# PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 24 lines of boot log:
---------------------------------------------
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__
_call(self.context, command, ignore_failure, timeout)
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call
context.run_command(cmd, failok=ignore_failure)
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command
rc = subprocess.check_call(command, **output_args)
File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
raise CalledProcessError(retcode, cmd)
CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124
<LAVA_DISPATCHER>2014-01-29 04:33:39 AM INFO: CriticalError
<LAVA_DISPATCHER>2014-01-29 04:33:39 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.).
ErrorMessage: Failed to boot test image.
Lava failed at action boot_linaro_image with error:Failed to boot test image.
Traceback (most recent call last):
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run
action.run(**params)
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run
raise CriticalError("Failed to boot test image.")
CriticalError: Failed to boot test image.
Reboot: capri ; ip9258 1 3 : ['off']
<LAVA_DISPATCHER>2014-01-29 04:33:39 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'}
<LAVA_DISPATCHER>2014-01-29 04:33:39 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/47d6f456edebe2583a44361b6bd53ea3…
LBOOT: Result: FAIL
LBOOT: Time: 972.40 seconds.
imx6q-wandboard: FAIL: last 24 lines of boot log:
-------------------------------------------------
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x382a88 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.36 seconds.
# PYBOOT: Result: FAIL
omap3-tobi,3730storm: FAIL: last 24 lines of boot log:
------------------------------------------------------
smc911x: MAC 00:15:c9:28:f0:11
Using smc911x-0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.156
Filename 'tmp/3730storm-MvlMMd/omap3-tobi.dtb'.
Load address: 0x81f00000
Loading: *####
2.3 MiB/s
done
Bytes transferred = 56692 (dd74 hex)
Overo # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Overo # bootz ${loadaddr} - 0x81f00000
bootz ${loadaddr} - 0x81f00000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Loading Device Tree to 8ffef000, end 8ffffd73 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 25.55 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log:
------------------------------------------------------------
1.5 MiB/s
done
Bytes transferred = 32741 (7fe5 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100afe4
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 21.77 seconds.
# PYBOOT: Result: FAIL
u8500_defconfig
---------------
ste-snowball: FAIL: last 24 lines of boot log:
----------------------------------------------
#################################################################
#####
done
Bytes transferred = 2934601 (2cc749 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000
bootm 0x00800000
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2934537 Bytes = 2.8 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.42 seconds.
# PYBOOT: Result: FAIL
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.56 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.58 seconds.
# PYBOOT: Result: FAIL
11 years, 4 months
- 1
- 0
Tegra baseline test results for v3.13
by Paul Walmsley
Here are some basic Tegra test results for Linux v3.13.
Logs and other details at:
http://nvt.pwsan.com/pub/linux/testlogs/test_v3.13/20140119190136/
Test summary
------------
Build: zImage:
Pass: ( 2/ 2): multi_v7_defconfig, tegra_defconfig
Boot to userspace: multi_v7_defconfig:
Pass: ( 2/ 2): tegra114-dalmore-headless, tegra30-beaver
Boot to userspace: tegra_defconfig:
Pass: ( 2/ 2): tegra114-dalmore-headless, tegra30-beaver
vmlinux object size
(delta in bytes from test_v3.13-rc8 (7e22e91102c6b9df7c4ae2168910e19d2bb14cd6)):
text data bss total kernel
+28 -24 0 +4 multi_v7_defconfig
+380 0 0 +380 tegra_defconfig
Boot-time memory difference
(delta in bytes from test_v3.13-rc8 (7e22e91102c6b9df7c4ae2168910e19d2bb14cd6))
avail rsrvd high freed board kconfig dtb
. . . . tegra114-dalmore-hea multi_v7_defconfig tegra114-dalmore
. . . . tegra114-dalmore-hea tegra_defconfig tegra114-dalmore
. . . . tegra30-beaver multi_v7_defconfig tegra30-beaver
. . . . tegra30-beaver tegra_defconfig tegra30-beaver
11 years, 4 months
- 1
- 0
next boot: 30 passed 1 failed (next/next-20140128)
by Olof's autobooter
Failed boards:
panda multi_v7_defconfig : FAILED 1:35.52
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:20.97
arndale exynos_defconfig : passed 1:07.94
bbb omap2plus_defconfig : passed 1:37.10
bbb multi_v7_defconfig : passed 1:20.91
beaver tegra_defconfig : passed 0:58.53
beaver multi_v7_defconfig : passed 0:54.51
capri bcm_defconfig : passed 0:45.31
capri multi_v7_defconfig : passed 0:44.11
cubie sunxi_defconfig : passed 0:50.66
cubie multi_v7_defconfig : passed 0:51.32
cubie2 sunxi_defconfig : passed 0:49.86
cubie2 multi_v7_defconfig : passed 0:58.34
cubie2 multi_lpae_defconfig : passed 0:49.68
cubox dove_defconfig : passed 1:07.38
dalmore tegra_defconfig : passed 1:19.16
dalmore multi_v7_defconfig : passed 1:18.95
dalmore multi_lpae_defconfig : passed 1:18.22
hummingboard imx_v6_v7_defconfig : warnings 1:19.49
hummingboard multi_v7_defconfig : passed 0:59.19
panda omap2plus_defconfig : passed 1:14.72
sama5 sama5_defconfig : passed 1:52.11
seaboard tegra_defconfig : passed 1:04.97
seaboard multi_v7_defconfig : passed 1:06.73
snow exynos_defconfig : passed 1:23.19
snowball u8500_defconfig : passed 1:27.56
snowball multi_v7_defconfig : passed 2:06.30
trimslice tegra_defconfig : passed 0:55.41
trimslice multi_v7_defconfig : passed 1:06.36
wandboard imx_v6_v7_defconfig : warnings 0:57.57
wandboard multi_v7_defconfig : passed 1:01.92
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board panda-multi_v7_defconfig failure log:
-------------------------------------------------
[ 1.441864] usbcore: registered new interface driver usb-storage
[ 1.449615] mousedev: PS/2 mouse device common for all mice
[ 1.457244] i2c /dev entries driver
[ 1.462341] sdhci: Secure Digital Host Controller Interface driver
[ 1.468841] sdhci: Copyright(c) Pierre Ossman
[ 1.474060] omap_hsmmc 4809c000.mmc: vmmc regulator missing
[ 1.479949] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral
[ 1.487609] omap_hsmmc 480d5000.mmc: vmmc regulator missing
[ 1.493530] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral
[ 1.501190] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.508422] usbcore: registered new interface driver usbhid
[ 1.514282] usbhid: USB HID core driver
[ 1.521606] TCP: cubic registered
[ 1.525115] NET: Registered protocol family 17
[ 1.529968] Key type dns_resolver registered
[ 1.534912] Power Management for TI OMAP4+ devices.
[ 1.540039] Power Management for TI OMAP4.
[ 1.544372] OMAP4 PM: u-boot >= v2012.07 is required for full PM support
[ 1.551757] Registering SWP/SWPB emulation handler
[ 1.557830] vwl1271: 1800 mV
[ 1.562652] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 1.571807] twl 0-0048: PIH (irq 39) nested IRQs
[ 1.577392] twl_rtc rtc.11: Power up reset detected.
[ 1.583282] twl_rtc rtc.11: Enabling TWL-RTC
[ 1.589965] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0
[ 1.596923] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV
[ 1.602935] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV
[ 1.608917] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV
[ 1.614898] VMMC: 1200 <--> 3000 mV at 3000 mV
[ 1.620330] VPP: 1800 <--> 2500 mV at 1900 mV
[ 1.625671] VUSIM: 1200 <--> 2900 mV at 1800 mV
[ 1.630676] VDAC: 1800 mV
[ 1.634246] VANA: 2100 mV
[ 1.637756] VCXIO: 1800 mV
[ 1.637756] VUSB: 3300 mV
[ 1.644531] V1V8: 1800 mV
[ 1.648040] V2V1: 2100 mV
[ 1.653533] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz
~$off
# PYBOOT: Exception: timeout
11 years, 4 months
- 4
- 8
mainline boot: 5 passed 20 failed (mainline/v3.13-9218-g0e47c96)
by Olof's autobooter
Failed boards:
arndale exynos_defconfig : FAILED 1:18.73
beaver tegra_defconfig : BUILD FAILED
beaver multi_v7_defconfig : FAILED 1:01.99
capri multi_v7_defconfig : FAILED 1:02.80
cubie sunxi_defconfig : FAILED 1:00.23
cubie multi_v7_defconfig : FAILED 1:04.16
cubie2 sunxi_defconfig : FAILED 0:58.28
cubie2 multi_v7_defconfig : FAILED 1:06.27
cubie2 multi_lpae_defconfig : FAILED 0:58.79
cubox dove_defconfig : FAILED 1:11.44
dalmore tegra_defconfig : BUILD FAILED
dalmore multi_v7_defconfig : FAILED 1:04.75
dalmore multi_lpae_defconfig : FAILED 1:04.49
panda omap2plus_defconfig : FAILED 1:13.79
panda multi_v7_defconfig : FAILED 1:14.55
seaboard tegra_defconfig : BUILD FAILED
seaboard multi_v7_defconfig : FAILED 1:05.75
snow exynos_defconfig : FAILED 1:11.23
snowball u8500_defconfig : FAILED 1:12.11
snowball multi_v7_defconfig : FAILED 1:05.84
trimslice tegra_defconfig : BUILD FAILED
trimslice multi_v7_defconfig : FAILED 1:03.89
wandboard imx_v6_v7_defconfig : FAILED 1:00.71
wandboard multi_v7_defconfig : FAILED 1:10.21
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:09.51
bbb omap2plus_defconfig : passed 1:32.59
bbb multi_v7_defconfig : passed 1:20.17
capri bcm_defconfig : passed 0:42.18
sama5 sama5_defconfig : passed 1:49.58
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-exynos_defconfig failure log:
-------------------------------------------------
Load address: 0x40800000
Loading: *#################################################################
#################################################################
##########################################################
done
Bytes transferred = 2756288 (2a0ec0 hex)
ARNDALE5250 # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
ARNDALE5250 # tftp 0x407c0000 mainline/v3.13-9218-g0e47c96/exynos_defconfig/dtbs/exynos5250-arndale.dtb
tftp 0x407c0000 mainline/v3.13-9218-g0e47c96/exynos_defconfig/dtbs/exynos5250-arndale.dtb
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.176
Filename 'mainline/v3.13-9218-g0e47c96/exynos_defconfig/dtbs/exynos5250-arndale.dtb'.
Load address: 0x407c0000
Loading: *###
done
Bytes transferred = 33440 (82a0 hex)
ARNDALE5250 # printenv bootargs
printenv bootargs
bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw
ARNDALE5250 # bootm 0x40800000 - 0x407c0000
bootm 0x40800000 - 0x407c0000
## Booting kernel from Legacy Image at 40800000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2756224 Bytes = 2.6 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 407c0000
Booting using the fdt blob at 0x407c0000
Loading Kernel Image ... OK
OK
Loading Device Tree to 4fff4000, end 4ffff29f ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra30 (Beaver) # tftp 0x82000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
tftp 0x82000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
2.8 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
Tegra30 (Beaver) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra30 (Beaver) # tftp 0x83000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/tegra30-beaver.dtb
tftp 0x83000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/tegra30-beaver.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/tegra30-beaver.dtb'.
Load address: 0x83000000
Loading: *##
683.6 KiB/s
done
Bytes transferred = 23808 (5d00 hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait
Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to 8fff7000, end 8ffffcff ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log:
-------------------------------------------------
(user:build) Load fastboot kernel
GET_DESC ->STRING DESC
sending 'kernel' (3594 KB)...
................................................................................
................................OKAY [ 0.777s]
writing 'kernel'...
downloading of 3680904 bytes finished
Flashing Raw Image
Writing to partition 'kernel'
Writing 'kerneOKAY [ 0.187s]
finished. total time: 0.964s
l' DONE!
GET_DESC ->STRING DESC
sending 'device-tree' (2 KB)...
OKAY [ 0.005s]
writing 'device-tree'...
downloading of 2862 bytes finished
Flashing Raw Image
Writing to partition 'device-tree'
Writing 'device-tree' DOOKAY [ 0.011s]
finished. total time: 0.016s
NE!
GET_DESC ->STRING DESC
resuming boot...
MMC read: dev # OKAY [ 0.004s]
finished. total time: 0.004s
0, block # 72320, count 16384 ... 16384 blocks read: OK
MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK
## Flattened Device Tree blob at 9e000000
Booting using the fdt blob at 0x9e000000
Using Device Tree in place at 9e000000, end 9e003b2d
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log:
-------------------------------------------------
sun4i#tftp 0x40008000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
###########################node: cubie status: on
######################################
#################################################################
########################################################
2.8 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x41000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x41000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
341.8 KiB/s
done
Bytes transferred = 10869 (2a75 hex)
sun4i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log:
-------------------------------------------------
DHCP client bound to address 172.16.1.154
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x40008000 mainline/v3.13-9218-g0e47c96/sunxi_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9218-g0e47c96/sunxi_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-9218-g0e47c96/sunxi_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
########################################################
2.7 MiB/s
done
Bytes transferred = 1767792 (1af970 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x41000000 mainline/v3.13-9218-g0e47c96/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x41000000 mainline/v3.13-9218-g0e47c96/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-9218-g0e47c96/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
624 KiB/s
done
Bytes transferred = 10869 (2a75 hex)
sun4i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af970 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log:
-------------------------------------------------
.3
sun7i# tftp 0x40008000 mainline/v3.13-9218-g0e47c96/multi_lpae_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9218-g0e47c96/multi_lpae_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9218-g0e47c96/multi_lpae_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
#################################################################
#################################################################
##########################################################
3.9 MiB/s
done
Bytes transferred = 3700688 (3877d0 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 mainline/v3.13-9218-g0e47c96/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 mainline/v3.13-9218-g0e47c96/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9218-g0e47c96/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
243.2 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3877d0 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log:
-------------------------------------------------
sun7i# tftp 0x40008000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
4 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
192.4 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x410node: cubie2 status: on
00000
Kernel image @ 0x40008000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log:
-------------------------------------------------
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1node: cubie2 status: on
.3
sun7i# tftp 0x40008000 mainline/v3.13-9218-g0e47c96/sunxi_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9218-g0e47c96/sunxi_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9218-g0e47c96/sunxi_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
########################################################
4 MiB/s
done
Bytes transferred = 1767792 (1af970 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i#tftp 0x41000000 mainline/v3.13-9218-g0e47c96/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 mainline/v3.13-9218-g0e47c96/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9218-g0e47c96/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
425.8 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af970 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubox-dove_defconfig failure log:
-------------------------------------------------
CuBox>> dhcp
dhcp
Unknown command 'dhcp' - try 'help'
CuBox>> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
CuBox>> tftp 0x02000000 tmp/cubox-39Gqe5/tmpuJQyDg-uImage
tftp 0x02000000 tmp/cubox-39Gqe5/tmpuJQyDg-uImage
Using egiga0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.183
Filename 'tmp/cubox-39Gqe5/tmpuJQyDg-uImage'.
Load address: 0x2000000
Loading: *#################################################################
#################################################################
##############################################################
done
Bytes transferred = 2805799 (2ad027 hex)
CuBox>> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
CuBox>> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
CuBox>> bootm 0x02000000
bootm 0x02000000
## Booting kernel from Legacy Image at 02000000 ...
Image Name: Linux
Created: 2014-01-29 3:47:05 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2805735 Bytes = 2.7 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... node: cubox status: on
OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-9218-g0e47c96/multi_lpae_defconfig/zImage
tftp 0x82000000 mainline/v3.13-9218-g0e47c96/multi_lpae_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-9218-g0e47c96/multi_lpae_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
#################################################################
#################################################################
##########################################################
2.8 MiB/s
done
Bytes transferred = 3700688 (3877d0 hex)
Tegra114 (Dalmore) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-9218-g0e47c96/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb
tftp 0x83000000 mainline/v3.13-9218-g0e47c96/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-9218-g0e47c96/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'.
Load address: 0x83000000
Loading: *###
1 MiB/s
done
Bytes transferred = 34015 (84df hex)
Tegra114 (Dalmore) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk
Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x3877d0 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to 8fff4000, end 8ffff4de ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
tftp 0x82000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
2.8 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
Tegra114 (Dalmore) #setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb
tftp 0x83000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'.
Load address: 0x83000000
Loading: *###
454.1 KiB/s
done
Bytes transferred = 34015 (84df hex)
Tegra114 (Dalmore) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk
Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to 8fff4000, end 8ffff4de ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log:
-------------------------------------------------
Loading: *#################################################################
#################################################################
#################################################################
########################################################
done
Bytes transferred = 3680968 (382ac8 hex)
Panda #setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Panda # tftp 0x81f00000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/omap4-panda-es.dtb
tftp 0x81f00000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.182
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *####
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
Panda # bootm 0x82000000 - 0x81f00000
bootm 0x82000000 - 0x81f00000
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3680904 Bytes = 3.5 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Loading Kernel Image ... OK
OK
Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-omap2plus_defconfig failure log:
-------------------------------------------------
#################################################################
#################################################################
#################################################################
################################
done
Bytes transferred = 4275512 (413d38 hex)
Panda # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Panda # tftp 0x81f00000 mainline/v3.13-9218-g0e47c96/omap2plus_defconfig/dtbs/omap4-panda-es.dtb
tftp 0x81f00000 mainline/v3.13-9218-g0e47c96/omap2plus_defconfig/dtbs/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.182
Filename 'mainline/v3.13-9218-g0e47c96/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *####
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
Panda # bootm 0x82000000 - 0x81f00000
bootm 0x82000000 - 0x81f00000
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4275448 Bytes = 4.1 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Loading Kernel Image ... OK
OK
Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra20 (SeaBoard) # tftp 0x800000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
tftp 0x800000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.101
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage'.
Load address: 0x800000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
2.8 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
Tegra20 (SeaBoard) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra20 (SeaBoard) # tftp 0x1800000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb
tftp 0x1800000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.101
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb'.
Load address: 0x1800000
Loading: *##
774.4 KiB/s
done
Bytes transferred = 25391 (632f hex)
Tegra20 (SeaBoard) # printenv bootargs
printenv bootargs
bootargs=root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk
Tegra20 (SeaBoard) # bootz 0x800000 - 0x1800000
bootz 0x800000 - 0x1800000
Kernel image @ 0x800000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 01800000
Booting using the fdt blob at 0x1800000
Loading Device Tree to 0fff6000, end 0ffff32e ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snow-exynos_defconfig failure log:
-------------------------------------------------
OK
Loading Device Tree to 5fff0000, end 5ffff7f8 ... OK
Starting kernel ...
Timer summary in microseconds:
Mark Elapsed Stage
0 0 reset
100,000 100,000 spl_start
1,698,323 1,598,323 board_init_f
1,748,237 49,914 board_init_r
1,750,444 2,207 board_init
1,881,074 130,630 board_init_done
1,963,353 82,279 id=64
1,968,774 5,421 main_loop
3,907,217 1,938,443 usb_start
8,586,311 4,679,094 tftp_start
8,586,329 18 id=80
8,586,330 1 eth_start
12,361,036 3,774,706 id=81
12,361,121 85 id=82
12,361,126 5 id=84
12,361,128 2 tftp_done
19,706,907 7,345,779 bootm_start
19,706,915 8 id=1
19,786,953 80,038 id=2
19,786,973 20 id=3
20,568,569 781,596 id=4
20,568,571 2 id=5
20,568,583 12 id=6
21,291,390 722,807 id=7
21,291,394 4 id=8
21,291,407 13 id=15
21,859,995 568,588 start_kernel
Accumulated time:
154,767 lcd
Stashed 27 records
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log:
-------------------------------------------------
smc911x: MAC 08:00:08:1e:0f:44
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.138
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-zIF7g1/tmpXgNw15-uImage
tftp 0x00100000 tmp/snowball-zIF7g1/tmpXgNw15-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.138
Filename 'tmp/snowball-zIF7g1/tmpXgNw15-uImage'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
#################################################################
###########################################################
done
Bytes transferred = 3716481 (38b581 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000
bootm 0x00100000
## Booting kernel from Legacy Image at 00100000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3716417 Bytes = 3.5 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log:
-------------------------------------------------
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.138
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-AvCsjC/tmpuQuvIj-uImage
tftp 0x00100000 tmp/snowball-AvCsjC/tmpuQuvIj-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.138
Filename 'tmp/snowball-AvCsjC/tmpuQuvIj-uImage'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
#################################################################
#####
done
Bytes transferred = 2934601 (2cc749 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000
bootm 0x00100000
## Booting kernel from Legacy Image at 00100000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2934537 Bytes = 2.8 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
node: snowball status: on
~$off
# PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra20 (TrimSlice) # tftp 0x800000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
tftp 0x800000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage'.
Load address: 0x800000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
3.1 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
Tegra20 (TrimSlice) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra20 (TrimSlice) # tftp 0x1800000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb
tftp 0x1800000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb'.
Load address: 0x1800000
Loading: *##
759.8 KiB/s
done
Bytes transferred = 20236 (4f0c hex)
Tegra20 (TrimSlice) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw
Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000
bootz 0x800000 - 0x1800000
Kernel image @ 0x800000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 01800000
Booting using the fdt blob at 0x1800000
Loading Device Tree to 0fff8000, end 0fffff0b ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log:
-------------------------------------------------
tftp 0x10800000 mainline/v3.13-9218-g0e47c96/imx_v6_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-9218-g0e47c96/imx_v6_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
################
5.8 MiB/s
done
Bytes transferred = 5000784 (4c4e50 hex)
=> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
=> tftp 0x11000000 mainline/v3.13-9218-g0e47c96/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb
tftp 0x11000000 mainline/v3.13-9218-g0e47c96/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-9218-g0e47c96/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *###
4.7 MiB/s
done
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4c4e50 ]
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log:
-------------------------------------------------
=> tftp 0x10800000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
tftp 0x10800000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
6.1 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
=> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
=> tftp 0x11000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
tftp 0x11000000 mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-9218-g0e47c96/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *###
1.1 MiB/s
done
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenode: wandboard status: on
nv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
11 years, 4 months
- 1
- 0
mainline boot: 15 pass, 21 fail (v3.13-8989-g4db658e)
by Kevin's boot bot
Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline
Git describe: v3.13-8989-g4db658e
Failed boot tests (console logs at the end)
===========================================
omap4-panda: FAIL: omap2plus_defconfig
omap4-panda-es: FAIL: omap2plus_defconfig
sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig
imx6q-wandboard: FAIL: imx_v6_v7_defconfig
sun7i-a20-cubieboard2: FAIL: sunxi_defconfig
sun4i-a10-cubieboard: FAIL: sunxi_defconfig
exynos5250-arndale: FAIL: exynos_defconfig
ste-snowball: FAIL: multi_v7_defconfig
tegra30-beaver: FAIL: multi_v7_defconfig
sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig
armada-370-mirabox: FAIL: multi_v7_defconfig
omap4-panda: FAIL: multi_v7_defconfig
omap4-panda-es: FAIL: multi_v7_defconfig
armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig
sun4i-a10-cubieboard: FAIL: multi_v7_defconfig
bcm28155-ap: FAIL: multi_v7_defconfig
imx6q-wandboard: FAIL: multi_v7_defconfig
imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig
ste-snowball: FAIL: u8500_defconfig
armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig
armada-370-mirabox: FAIL: mvebu_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
am335x-boneblack PASS: 0 min 25.5 sec
omap3-beagle-xm PASS: 0 min 57.5 sec
am335x-bone PASS: 0 min 27.4 sec
omap4-panda FAIL: 0 min 56.4 sec
omap4-panda-es FAIL: 0 min 55.2 sec
omap3-tobi,3730storm PASS: 0 min 25.4 sec
omap3-tobi,3530overo PASS: 0 min 22.8 sec
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2 FAIL: 0 min 19.5 sec
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec
imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec
imx6q-wandboard FAIL: 0 min 20.7 sec
sunxi_defconfig
---------------
sun7i-a20-cubieboard2 FAIL: 0 min 17.9 sec
sun4i-a10-cubieboard FAIL: 0 min 18.4 sec
bcm_defconfig
-------------
bcm28155-ap PASS: 1 min 4.0 sec
exynos_defconfig
----------------
exynos5250-arndale FAIL: 0 min 33.9 sec
multi_v7_defconfig
------------------
ste-snowball FAIL: 0 min 32.2 sec
tegra30-beaver FAIL: 0 min 23.9 sec
am335x-boneblack PASS: 0 min 22.4 sec
omap3-beagle-xm PASS: 0 min 55.1 sec
sun7i-a20-cubieboard2 FAIL: 0 min 19.3 sec
armada-370-mirabox FAIL: 0 min 31.6 sec
omap4-panda FAIL: 0 min 53.9 sec
omap4-panda-es FAIL: 0 min 58.0 sec
armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec
sun4i-a10-cubieboard FAIL: 0 min 23.6 sec
bcm28155-ap FAIL: 16 min 23.8 sec
imx6dl-wandboard,wand-solo PASS: 0 min 17.0 sec
am335x-bone PASS: 0 min 25.2 sec
imx6q-wandboard FAIL: 0 min 20.2 sec
omap3-tobi,3730storm PASS: 0 min 20.3 sec
imx6dl-wandboard,wand-dual FAIL: 0 min 22.0 sec
omap3-tobi,3530overo PASS: 0 min 20.7 sec
u8500_defconfig
---------------
ste-snowball FAIL: 0 min 28.3 sec
sama5_defconfig
---------------
sama5d35ek PASS: 0 min 17.5 sec
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec
armada-370-mirabox FAIL: 0 min 31.6 sec
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap4-panda: FAIL: last 24 lines of boot log:
---------------------------------------------
2.9 KiB/s
done
Bytes transferred = 20616 (5088 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f08087
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 56.38 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
------------------------------------------------
3.9 KiB/s
done
Bytes transferred = 20856 (5178 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f08177
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 55.19 seconds.
# PYBOOT: Result: FAIL
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
-------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3867a8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.53 seconds.
# PYBOOT: Result: FAIL
imx_v6_v7_defconfig
-------------------
imx6q-wandboard: FAIL: last 24 lines of boot log:
-------------------------------------------------
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4c48b8 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.74 seconds.
# PYBOOT: Result: FAIL
sunxi_defconfig
---------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
-------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 17.89 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 18.41 seconds.
# PYBOOT: Result: FAIL
exynos_defconfig
----------------
exynos5250-arndale: FAIL: last 24 lines of boot log:
----------------------------------------------------
tftp 0x407c0000 192.168.1.2:tmp/arndale-PM0wLU/exynos5250-arndale.dtb
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 192.168.1.2; our IP address is 192.168.1.167
Filename 'tmp/arndale-PM0wLU/exynos5250-arndale.dtb'.
Load address: 0x407c0000
Loading: *###
done
Bytes transferred = 33440 (82a0 hex)
ARNDALE5250 # printenv bootargs
printenv bootargs
bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
ARNDALE5250 #bootz 0x40800000 - 0x407c0000
bootz 0x40800000 - 0x407c0000
## Flattened Device Tree blob at 407c0000
Booting using the fdt blob at 0x407c0000
Using Device Tree in place at 407c0000, end 407cb29f
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 33.93 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 24 lines of boot log:
----------------------------------------------
#################################################################
##########################################################
done
Bytes transferred = 3711969 (38a3e1 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000
bootm 0x00800000
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3711905 Bytes = 3.5 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 32.24 seconds.
# PYBOOT: Result: FAIL
tegra30-beaver: FAIL: last 24 lines of boot log:
------------------------------------------------
Bytes transferred = 23808 (5d00 hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 debug earlyprintk
Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000
bootz 0x81000000 0x82000000 0x83000000
Kernel image @ 0x81000000 [ 0x000000 - 0x3818e8 ]
## Loading init Ramdisk from Legacy Image at 82000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Using Device Tree in place at 83000000, end 83008cff
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 23.89 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
-------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.30 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.61 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 24 lines of boot log:
---------------------------------------------
2.9 KiB/s
done
Bytes transferred = 20616 (5088 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f08087
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 53.93 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
------------------------------------------------
2 KiB/s
done
Bytes transferred = 20856 (5178 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f08177
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 58.01 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.61 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 23.62 seconds.
# PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 24 lines of boot log:
---------------------------------------------
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__
_call(self.context, command, ignore_failure, timeout)
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call
context.run_command(cmd, failok=ignore_failure)
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command
rc = subprocess.check_call(command, **output_args)
File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
raise CalledProcessError(retcode, cmd)
CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124
<LAVA_DISPATCHER>2014-01-29 03:31:39 AM INFO: CriticalError
<LAVA_DISPATCHER>2014-01-29 03:31:39 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.).
ErrorMessage: Failed to boot test image.
Lava failed at action boot_linaro_image with error:Failed to boot test image.
Traceback (most recent call last):
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run
action.run(**params)
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run
raise CriticalError("Failed to boot test image.")
CriticalError: Failed to boot test image.
Reboot: capri ; ip9258 1 3 : ['off']
<LAVA_DISPATCHER>2014-01-29 03:31:39 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'}
<LAVA_DISPATCHER>2014-01-29 03:31:40 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/d392fe29db8dca192079efe39630271c…
LBOOT: Result: FAIL
LBOOT: Time: 983.80 seconds.
imx6q-wandboard: FAIL: last 24 lines of boot log:
-------------------------------------------------
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x3818e8 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.24 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log:
------------------------------------------------------------
1.4 MiB/s
done
Bytes transferred = 32741 (7fe5 hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100afe4
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.02 seconds.
# PYBOOT: Result: FAIL
u8500_defconfig
---------------
ste-snowball: FAIL: last 24 lines of boot log:
----------------------------------------------
#################################################################
#####
done
Bytes transferred = 2934657 (2cc781 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000
bootm 0x00800000
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2934593 Bytes = 2.8 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 28.27 seconds.
# PYBOOT: Result: FAIL
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.56 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.55 seconds.
# PYBOOT: Result: FAIL
11 years, 4 months
- 1
- 0
mainline build: 5 warnings 1 failures (mainline/v3.13-9218-g0e47c96)
by Olof's autobuilder
Here are the build results from automated periodic testing.
The tree being built was mainline, found at:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch)
Topmost commit:
0e47c96 Merge tag 'for-linus-20140127' of git://git.infradead.org/linux-mtd
Build logs (stderr only) can be found at the following link (experimental):
http://arm-soc.lixom.net/buildlogs/mainline/v3.13-9218-g0e47c96/
Runtime: 19m 16s
Passed: 122
Failed: 1
Warnings: 5
Section mismatches: 0
-------------------------------------------------------------------------------
Failed defconfigs:
tegra_defconfig
-------------------------------------------------------------------------------
Errors:
tegra_defconfig:
drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration]
Warnings:
1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable]
1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable]
1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable]
1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function]
1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function]
Section mismatches:
11 years, 4 months
- 1
- 0
mainline boot: 5 passed 19 failed (mainline/v3.13-9044-gd30492a)
by Olof's autobooter
Failed boards:
arndale exynos_defconfig : FAILED 1:19.90
beaver tegra_defconfig : BUILD FAILED
beaver multi_v7_defconfig : FAILED 1:02.04
capri multi_v7_defconfig : FAILED 1:02.53
cubie sunxi_defconfig : FAILED 1:00.21
cubie multi_v7_defconfig : FAILED 1:04.73
cubie2 sunxi_defconfig : FAILED 0:58.31
cubie2 multi_v7_defconfig : FAILED 1:03.29
cubie2 multi_lpae_defconfig : FAILED 0:59.14
cubox dove_defconfig : FAILED 1:11.84
dalmore tegra_defconfig : BUILD FAILED
dalmore multi_v7_defconfig : FAILED 1:04.73
dalmore multi_lpae_defconfig : FAILED 1:04.90
panda omap2plus_defconfig : FAILED 1:12.61
panda multi_v7_defconfig : FAILED 1:14.68
seaboard tegra_defconfig : BUILD FAILED
snow exynos_defconfig : FAILED 1:11.61
snowball u8500_defconfig : FAILED 1:12.92
snowball multi_v7_defconfig : FAILED 1:05.89
trimslice tegra_defconfig : BUILD FAILED
trimslice multi_v7_defconfig : FAILED 1:03.91
wandboard imx_v6_v7_defconfig : FAILED 1:00.35
wandboard multi_v7_defconfig : FAILED 1:10.76
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:12.64
bbb omap2plus_defconfig : passed 1:32.25
bbb multi_v7_defconfig : passed 1:19.02
capri bcm_defconfig : passed 0:41.67
sama5 sama5_defconfig : passed 1:56.07
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-exynos_defconfig failure log:
-------------------------------------------------
Load address: 0x40800000
Loading: *#################################################################
#################################################################
##########################################################
done
Bytes transferred = 2756288 (2a0ec0 hex)
ARNDALE5250 # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
ARNDALE5250 # tftp 0x407c0000 mainline/v3.13-9044-gd30492a/exynos_defconfig/dtbs/exynos5250-arndale.dtb
tftp 0x407c0000 mainline/v3.13-9044-gd30492a/exynos_defconfig/dtbs/exynos5250-arndale.dtb
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.176
Filename 'mainline/v3.13-9044-gd30492a/exynos_defconfig/dtbs/exynos5250-arndale.dtb'.
Load address: 0x407c0000
Loading: *###
done
Bytes transferred = 33440 (82a0 hex)
ARNDALE5250 # printenv bootargs
printenv bootargs
bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw
ARNDALE5250 # bootm 0x40800000 - 0x407c0000
bootm 0x40800000 - 0x407c0000
## Booting kernel from Legacy Image at 40800000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2756224 Bytes = 2.6 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 407c0000
Booting using the fdt blob at 0x407c0000
Loading Kernel Image ... OK
OK
Loading Device Tree to 4fff4000, end 4ffff29f ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra30 (Beaver) # tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
2.8 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
Tegra30 (Beaver) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra30 (Beaver) # tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra30-beaver.dtb
tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra30-beaver.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra30-beaver.dtb'.
Load address: 0x83000000
Loading: *##
860.4 KiB/s
done
Bytes transferred = 23808 (5d00 hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait
Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to 8fff7000, end 8ffffcff ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log:
-------------------------------------------------
(user:build) Load fastboot kernel
GET_DESC ->STRING DESC
sending 'kernel' (3594 KB)...
................................................................................
................................OKAY [ 0.774s]
writing 'kernel'...
downloading of 3680904 bytes finished
Flashing Raw Image
Writing to partition 'kernel'
Writing 'kerOKAY [ 0.674s]
finished. total time: 1.448s
nel' DONE!
GET_DESC ->STRING DESC
sending 'device-tree' (2 KB)...
OKAY [ 0.002s]
writing 'device-tree'...
downloading of 2862 bytes finished
Flashing Raw Image
Writing to partition 'device-tree'
Writing 'device-tree' DONE!
OKAY [ 0.011s]
finished. total time: 0.014s
GET_DESC ->STRING DESC
resuming boot...
OKAY [ 0.001s]
finished. total time: 0.001s
MMC read: dev # 0, block # 72320, count 16384 ... 16384 blocks read: OK
MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK
## Flattened Device Tree blob at 9e000000
Booting using the fdt blob at 0x9e000000
Using Device Tree in place at 9e000000, end 9e003b2d
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log:
-------------------------------------------------
sun4i#tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
2.8 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
365.2 KiB/s
done
Bytes transferred = 10869 (2a75 hex)
sun4i#printenv bootargs
node: cubie status: on
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log:
-------------------------------------------------
DHCP client bound to address 172.16.1.154
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x40008000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
########################################################
2.6 MiB/s
done
Bytes transferred = 1767720 (1af928 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x41000000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x41000000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
2.1 MiB/s
done
Bytes transferred = 10869 (2a75 hex)
sun4i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log:
-------------------------------------------------
sun7i# tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage
node: cubie2 status: on
tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
#################################################################
#################################################################
##########################################################
2.8 MiB/s
done
Bytes transferred = 3700688 (3877d0 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
441.4 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3877d0 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log:
-------------------------------------------------
sun7i# tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
4.1 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
sun7i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
518.6 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
node: cubie2 status: on
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log:
-------------------------------------------------
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1node: cubie2 status: on
.3
sun7i# tftp 0x40008000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage
tftp 0x40008000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9044-gd30492a/sunxi_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
########################################################
4 MiB/s
done
Bytes transferred = 1767720 (1af928 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-9044-gd30492a/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
441.4 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubox-dove_defconfig failure log:
-------------------------------------------------
CuBox>> dhcp
dhcp
Unknown command 'dhcp' - try 'help'
CuBox>> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
CuBox>> tftp 0x02000000 tmp/cubox-osf53C/tmp8cWbId-uImage
tftp 0x02000000 tmp/cubox-osf53C/tmp8cWbId-uImage
Using egiga0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.183
Filename 'tmp/cubox-osf53C/tmp8cWbId-uImage'.
Load address: 0x2000000
Loading: *#################################################################
#################################################################
##############################################################
done
Bytes transferred = 2805463 (2aced7 hex)
CuBox>> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
CuBox>> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
CuBox>> bootm 0x02000000
bootm 0x02000000
## Booting kernel from Legacy Image at 02000000 ...
Image Name: Linux
Created: 2014-01-29 3:09:46 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2805399 Bytes = 2.7 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... node: cubox status: on
OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage
tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
#################################################################
#################################################################
##########################################################
2.8 MiB/s
done
Bytes transferred = 3700688 (3877d0 hex)
Tegra114 (Dalmore) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb
tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-9044-gd30492a/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'.
Load address: 0x83000000
Loading: *###
737.3 KiB/s
done
Bytes transferred = 34015 (84df hex)
Tegra114 (Dalmore) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk
Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x3877d0 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to 8fff4000, end 8ffff4de ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
tftp 0x82000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
2.8 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
Tegra114 (Dalmore) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb
tftp 0x83000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'.
Load address: 0x83000000
Loading: *###
664.1 KiB/s
done
Bytes transferred = 34015 (84df hex)
Tegra114 (Dalmore) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk
Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to 8fff4000, end 8ffff4de ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log:
-------------------------------------------------
Loading: *#################################################################
#################################################################
#################################################################
########################################################
done
Bytes transferred = 3680968 (382ac8 hex)
Panda # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Panda # tftp 0x81f00000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/omap4-panda-es.dtb
tftp 0x81f00000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.182
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *####
done
Bytes transferred = 50489 (c539 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
Panda # bootm 0x82000000 - 0x81f00000
bootm 0x82000000 - 0x81f00000
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3680904 Bytes = 3.5 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Loading Kernel Image ... OK
OK
Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-omap2plus_defconfig failure log:
-------------------------------------------------
#################################################################
#################################################################
#################################################################
################################
done
Bytes transferred = 4275088 (413b90 hex)
Panda # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Panda # tftp 0x81f00000 mainline/v3.13-9044-gd30492a/omap2plus_defconfig/dtbs/omap4-panda-es.dtb
tftp 0x81f00000 mainline/v3.13-9044-gd30492a/omap2plus_defconfig/dtbs/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.182
Filename 'mainline/v3.13-9044-gd30492a/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *####
done
Bytes transferred = 50489 (c539 hex)
Panda #printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
Panda # bootm 0x82000000 - 0x81f00000
bootm 0x82000000 - 0x81f00000
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4275024 Bytes = 4.1 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Loading Kernel Image ... OK
OK
Using Device Tree in place at 81f00000, end 81f0f538
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snow-exynos_defconfig failure log:
-------------------------------------------------
OK
Loading Device Tree to 5fff0000, end 5ffff7f8 ... OK
Starting kernel ...
Timer summary in microseconds:
Mark Elapsed Stage
0 0 reset
100,000 100,000 spl_start
1,699,347 1,599,347 board_init_f
1,749,137 49,790 board_init_r
1,751,338 2,201 board_init
1,881,182 129,844 board_init_done
1,961,004 79,822 id=64
1,966,426 5,422 main_loop
3,890,415 1,923,989 usb_start
8,569,774 4,679,359 tftp_start
8,569,792 18 id=80
8,569,794 2 eth_start
12,357,120 3,787,326 id=81
12,357,204 84 id=82
12,357,209 5 id=84
12,357,211 2 tftp_done
19,703,739 7,346,528 bootm_start
19,703,747 8 id=1
19,783,705 79,958 id=2
19,783,724 19 id=3
20,565,222 781,498 id=4
20,565,223 1 id=5
20,565,235 12 id=6
21,287,791 722,556 id=7
21,287,794 3 id=8
21,287,808 14 id=15
21,856,261 568,453 start_kernel
Accumulated time:
142,578 lcd
Stashed 27 records
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log:
-------------------------------------------------
smc911x: MAC 08:00:08:1e:0f:44
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.138
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-522sRC/tmpRjnk6_-uImage
tftp 0x00100000 tmp/snowball-522sRC/tmpRjnk6_-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.138
Filename 'tmp/snowball-522sRC/tmpRjnk6_-uImage'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
#################################################################
###########################################################
done
Bytes transferred = 3716481 (38b581 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000
bootm 0x00100000
## Booting kernel from Legacy Image at 00100000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3716417 Bytes = 3.5 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log:
-------------------------------------------------
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.138
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-9c9TlJ/tmpIFMocr-uImage
tftp 0x00100000 tmp/snowball-9c9TlJ/tmpIFMocr-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.138
Filename 'tmp/snowball-9c9TlJ/tmpIFMocr-uImage'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
#################################################################
#####
done
Bytes transferred = 2934601 (2cc749 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000
bootm 0x00100000
## Booting kernel from Legacy Image at 00100000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2934537 Bytes = 2.8 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
node: snowball status: on
~$off
# PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra20 (TrimSlice) # tftp 0x800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
tftp 0x800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'.
Load address: 0x800000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
2.8 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
Tegra20 (TrimSlice) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra20 (TrimSlice) # tftp 0x1800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb
tftp 0x1800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb'.
Load address: 0x1800000
Loading: *##
598.6 KiB/s
done
Bytes transferred = 20236 (4f0c hex)
Tegra20 (TrimSlice) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw
Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000
bootz 0x800000 - 0x1800000
Kernel image @ 0x800000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 01800000
Booting using the fdt blob at 0x1800000
Loading Device Tree to 0fff8000, end 0fffff0b ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log:
-------------------------------------------------
tftp 0x10800000 mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
################
5.7 MiB/s
done
Bytes transferred = 4999760 (4c4a50 hex)
=> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
=> tftp 0x11000000 mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb
tftp 0x11000000 mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-9044-gd30492a/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *###
729.5 KiB/s
done
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4c4a50 ]
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log:
-------------------------------------------------
=> tftp 0x10800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
tftp 0x10800000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
6.1 MiB/s
done
Bytes transferred = 3680904 (382a88 hex)
=> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
=>tftp 0x11000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
tftp 0x11000000 mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-9044-gd30492a/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *###
559.6 KiB/s
done
Bytes transferred = 34380 (864c hex)
=>printenv bootargs
printenv boonode: wandboard status: on
targs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x382a88 ]
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
11 years, 4 months
- 1
- 0
mainline build: 7 warnings 1 failures (mainline/v3.13-9044-gd30492a)
by Olof's autobuilder
Here are the build results from automated periodic testing.
The tree being built was mainline, found at:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch)
Topmost commit:
d30492a Merge tag 'clk-for-linus-3.14-part2' of git://git.linaro.org/people/mike.turquette/linux
Build logs (stderr only) can be found at the following link (experimental):
http://arm-soc.lixom.net/buildlogs/mainline/v3.13-9044-gd30492a/
Runtime: 18m 46s
Passed: 122
Failed: 1
Warnings: 7
Section mismatches: 0
-------------------------------------------------------------------------------
Failed defconfigs:
tegra_defconfig
-------------------------------------------------------------------------------
Errors:
tegra_defconfig:
drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration]
Warnings:
1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable]
1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable]
1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable]
1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function]
1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function]
2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function]
Section mismatches:
11 years, 4 months
- 1
- 0
mainline boot: 5 passed 20 failed (mainline/v3.13-8989-g4db658e)
by Olof's autobooter
Failed boards:
arndale exynos_defconfig : FAILED 1:24.83
beaver tegra_defconfig : BUILD FAILED
beaver multi_v7_defconfig : FAILED 1:04.31
capri multi_v7_defconfig : FAILED 1:02.91
cubie sunxi_defconfig : FAILED 1:02.70
cubie multi_v7_defconfig : FAILED 1:01.85
cubie2 sunxi_defconfig : FAILED 1:00.73
cubie2 multi_v7_defconfig : FAILED 1:03.78
cubie2 multi_lpae_defconfig : FAILED 0:59.26
cubox dove_defconfig : FAILED 1:11.55
dalmore tegra_defconfig : BUILD FAILED
dalmore multi_v7_defconfig : FAILED 1:07.06
dalmore multi_lpae_defconfig : FAILED 1:04.47
panda omap2plus_defconfig : FAILED 1:13.52
panda multi_v7_defconfig : FAILED 1:14.79
seaboard tegra_defconfig : BUILD FAILED
seaboard multi_v7_defconfig : FAILED 1:09.14
snow exynos_defconfig : FAILED 1:12.12
snowball u8500_defconfig : FAILED 1:15.20
snowball multi_v7_defconfig : FAILED 1:06.05
trimslice tegra_defconfig : BUILD FAILED
trimslice multi_v7_defconfig : FAILED 1:07.13
wandboard imx_v6_v7_defconfig : FAILED 1:03.00
wandboard multi_v7_defconfig : FAILED 1:06.77
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:14.10
bbb omap2plus_defconfig : passed 1:36.08
bbb multi_v7_defconfig : passed 1:20.10
capri bcm_defconfig : passed 0:42.50
sama5 sama5_defconfig : passed 1:54.20
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-exynos_defconfig failure log:
-------------------------------------------------
Load address: 0x40800000
Loading: *#################################################################
#################################################################
##########################################################
done
Bytes transferred = 2756168 (2a0e48 hex)
ARNDALE5250 # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
ARNDALE5250 # tftp 0x407c0000 mainline/v3.13-8989-g4db658e/exynos_defconfig/dtbs/exynos5250-arndale.dtb
tftp 0x407c0000 mainline/v3.13-8989-g4db658e/exynos_defconfig/dtbs/exynos5250-arndale.dtb
Waiting for Ethernet connection... done.
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.176
Filename 'mainline/v3.13-8989-g4db658e/exynos_defconfig/dtbs/exynos5250-arndale.dtb'.
Load address: 0x407c0000
Loading: *###
done
Bytes transferred = 33440 (82a0 hex)
ARNDALE5250 # printenv bootargs
printenv bootargs
bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw
ARNDALE5250 # bootm 0x40800000 - 0x407c0000
bootm 0x40800000 - 0x407c0000
## Booting kernel from Legacy Image at 40800000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2756104 Bytes = 2.6 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 407c0000
Booting using the fdt blob at 0x407c0000
Loading Kernel Image ... OK
OK
Loading Device Tree to 4fff4000, end 4ffff29f ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra30 (Beaver) # tftp 0x82000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
tftp 0x82000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
2.8 MiB/s
done
Bytes transferred = 3676392 (3818e8 hex)
Tegra30 (Beaver) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra30 (Beaver) #tftp 0x83000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/tegra30-beaver.dtb
tftp 0x83000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/tegra30-beaver.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.111
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/tegra30-beaver.dtb'.
Load address: 0x83000000
Loading: *##
182.6 KiB/s
done
Bytes transferred = 23808 (5d00 hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait
Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x3818e8 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to 8fff7000, end 8ffffcff ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log:
-------------------------------------------------
(user:build) Load fastboot kernel
GET_DESC ->STRING DESC
sending 'kernel' (3590 KB)...
................................................................................
................................OKAY [ 0.777s]
writing 'kernel'...
downloading of 3676392 bytes finished
Flashing Raw Image
Writing to partition 'kernel'
WritingOKAY [ 0.687s]
finished. total time: 1.464s
'kernel' DONE!
GET_DESC ->STRING DESC
sending 'device-tree' (2 KB)...
OKAY [ 0.005s]
writing 'device-tree'...
downloading of 2862 bytes finished
Flashing Raw Image
Writing to partition 'device-tree'
Writing 'deviceOKAY [ 0.011s]
finished. total time: 0.017s
-tree' DONE!
GET_DESC ->STRING DESC
resuming boot...
MMC read: dev # 0, block # 72OKAY [ 0.004s]
finished. total time: 0.004s
320, count 16384 ... 16384 blocks read: OK
MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK
## Flattened Device Tree blob at 9e000000
Booting using the fdt blob at 0x9e000000
Using Device Tree in place at 9e000000, end 9e003b2d
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log:
-------------------------------------------------
sun4i#tftp 0x40008000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
tftp 0x40008000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
###########################################node: cubie status: on
######################
#################################################################
########################################################
2.8 MiB/s
done
Bytes transferred = 3676392 (3818e8 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x41000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x41000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
365.2 KiB/s
done
Bytes transferred = 10869 (2a75 hex)
sun4i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie-sunxi_defconfig failure log:
-------------------------------------------------
DHCP client bound to address 172.16.1.154
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x40008000 mainline/v3.13-8989-g4db658e/sunxi_defconfig/zImage
tftp 0x40008000 mainline/v3.13-8989-g4db658e/sunxi_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-8989-g4db658e/sunxi_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
########################################################
2.7 MiB/s
done
Bytes transferred = 1767720 (1af928 hex)
sun4i#setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun4i#tftp 0x41000000 mainline/v3.13-8989-g4db658e/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb
tftp 0x41000000 mainline/v3.13-8989-g4db658e/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.154
Filename 'mainline/v3.13-8989-g4db658e/sunxi_defconfig/dtbs/sun4i-a10-cubieboard.dtb'.
Load address: 0x41000000
Loading: *#
392.6 KiB/s
done
Bytes transferred = 10869 (2a75 hex)
sun4i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log:
-------------------------------------------------
.3
sun7i# tftp 0x40008000 mainline/v3.13-8989-g4db658e/multi_lpae_defconfig/zImage
tftp 0x40008000 mainline/v3.13-8989-g4db658e/multi_lpae_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-8989-g4db658e/multi_lpae_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
#################################################################
#################################################################
#########################################################
3.9 MiB/s
done
Bytes transferred = 3696552 (3867a8 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 mainline/v3.13-8989-g4db658e/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 mainline/v3.13-8989-g4db658e/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-8989-g4db658e/multi_lpae_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
425.8 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3867a8 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log:
-------------------------------------------------
sun7i# tftp 0x40008000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
tftp 0x40008000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
4 MiB/s
done
Bytes transferred = 3676392 (3818e8 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
701.2 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x410node: cubie2 status: on
00000
Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log:
-------------------------------------------------
DHCP client bound to address 172.16.1.171
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x40008000 mainline/v3.13-8989-g4db658e/sunxi_defconfig/zImage
tftp 0x40008000 mainline/v3.13-8989-g4db658e/sunxi_defconfig/zImage
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-8989-g4db658e/sunxi_defconfig/zImage'.
Load address: 0x40008000
Loading: *#################################################################
########################################################
4 MiB/s
done
Bytes transferred = 1767720 (1af928 hex)
sun7i# setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
sun7i# tftp 0x41000000 mainline/v3.13-8989-g4db658e/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
tftp 0x41000000 mainline/v3.13-8989-g4db658e/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.3; our IP address is 172.16.1.171
Filename 'mainline/v3.13-8989-g4db658e/sunxi_defconfig/dtbs/sun7i-a20-cubieboard2.dtb'.
Load address: 0x41000000
Loading: *#
441.4 KiB/s
done
Bytes transferred = 12220 (2fbc hex)
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# bootz 0x40008000 - 0x41000000
bootz 0x40008000 - 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ]
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board cubox-dove_defconfig failure log:
-------------------------------------------------
CuBox>> dhcp
dhcp
Unknown command 'dhcp' - try 'help'
CuBox>> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
CuBox>>tftp 0x02000000 tmp/cubox-BRwk56/tmpJCU1O_-uImage
tftp 0x02000000 tmp/cubox-BRwk56/tmpJCU1O_-uImage
Using egiga0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.183
Filename 'tmp/cubox-BRwk56/tmpJCU1O_-uImage'.
Load address: 0x2000000
Loading: *#################################################################
#################################################################
##############################################################
done
Bytes transferred = 2805343 (2ace5f hex)
CuBox>> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
CuBox>> printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait debug earlyprintk
CuBox>> bootm 0x02000000
bootm 0x02000000
## Booting kernel from Legacy Image at 02000000 ...
Image Name: Linux
Created: 2014-01-29 2:47:25 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2805279 Bytes = 2.7 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... node: cubox status: on
OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x82000000 mainline/v3.13-8989-g4db658e/multi_lpae_defconfig/zImage
tftp 0x82000000 mainline/v3.13-8989-g4db658e/multi_lpae_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-8989-g4db658e/multi_lpae_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
#################################################################
#################################################################
#########################################################
2.7 MiB/s
done
Bytes transferred = 3696552 (3867a8 hex)
Tegra114 (Dalmore) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-8989-g4db658e/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb
tftp 0x83000000 mainline/v3.13-8989-g4db658e/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-8989-g4db658e/multi_lpae_defconfig/dtbs/tegra114-dalmore.dtb'.
Load address: 0x83000000
Loading: *###
897.5 KiB/s
done
Bytes transferred = 34015 (84df hex)
Tegra114 (Dalmore) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk
Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x3867a8 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to 8fff4000, end 8ffff4de ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra114 (Dalmore) #tftp 0x82000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
tftp 0x82000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage'.
Load address: 0x82000000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
2.8 MiB/s
done
Bytes transferred = 3676392 (3818e8 hex)
Tegra114 (Dalmore) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra114 (Dalmore) # tftp 0x83000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb
tftp 0x83000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.143
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/tegra114-dalmore.dtb'.
Load address: 0x83000000
Loading: *###
1 MiB/s
done
Bytes transferred = 34015 (84df hex)
Tegra114 (Dalmore) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait debug earlyprintk
Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000
bootz 0x82000000 - 0x83000000
Kernel image @ 0x82000000 [ 0x000000 - 0x3818e8 ]
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Loading Device Tree to 8fff4000, end 8ffff4de ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log:
-------------------------------------------------
Loading: *#################################################################
#################################################################
#################################################################
########################################################
done
Bytes transferred = 3676456 (381928 hex)
Panda # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Panda # tftp 0x81f00000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/omap4-panda-es.dtb
tftp 0x81f00000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.182
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *##
done
Bytes transferred = 20856 (5178 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
Panda # bootm 0x82000000 - 0x81f00000
bootm 0x82000000 - 0x81f00000
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3676392 Bytes = 3.5 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Loading Kernel Image ... OK
OK
Using Device Tree in place at 81f00000, end 81f08177
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board panda-omap2plus_defconfig failure log:
-------------------------------------------------
#################################################################
#################################################################
#################################################################
################################
done
Bytes transferred = 4275496 (413d28 hex)
Panda # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Panda # tftp 0x81f00000 mainline/v3.13-8989-g4db658e/omap2plus_defconfig/dtbs/omap4-panda-es.dtb
tftp 0x81f00000 mainline/v3.13-8989-g4db658e/omap2plus_defconfig/dtbs/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.182
Filename 'mainline/v3.13-8989-g4db658e/omap2plus_defconfig/dtbs/omap4-panda-es.dtb'.
Load address: 0x81f00000
Loading: *##
done
Bytes transferred = 20856 (5178 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
Panda # bootm 0x82000000 - 0x81f00000
bootm 0x82000000 - 0x81f00000
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4275432 Bytes = 4.1 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Loading Kernel Image ... OK
OK
Using Device Tree in place at 81f00000, end 81f08177
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra20 (SeaBoard) # tftp 0x800000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
tftp 0x800000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.101
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage'.
Load address: 0x800000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
2.7 MiB/s
done
Bytes transferred = 3676392 (3818e8 hex)
Tegra20 (SeaBoard) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra20 (SeaBoard) # tftp 0x1800000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb
tftp 0x1800000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.101
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/tegra20-seaboard.dtb'.
Load address: 0x1800000
Loading: *##
918 KiB/s
done
Bytes transferred = 25391 (632f hex)
Tegra20 (SeaBoard) # printenv bootargs
printenv bootargs
bootargs=root=/dev/mmcblk0p3 console=ttyS0,115200 debug earlyprintk
Tegra20 (SeaBoard) # bootz 0x800000 - 0x1800000
bootz 0x800000 - 0x1800000
Kernel image @ 0x800000 [ 0x000000 - 0x3818e8 ]
## Flattened Device Tree blob at 01800000
Booting using the fdt blob at 0x1800000
Loading Device Tree to 0fff6000, end 0ffff32e ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snow-exynos_defconfig failure log:
-------------------------------------------------
OK
Loading Device Tree to 5fff0000, end 5ffff7f8 ... OK
Starting kernel ...
Timer summary in microseconds:
Mark Elapsed Stage
0 0 reset
100,000 100,000 spl_start
1,699,168 1,599,168 board_init_f
1,748,984 49,816 board_init_r
1,751,192 2,208 board_init
1,882,010 130,818 board_init_done
1,963,233 81,223 id=64
1,968,654 5,421 main_loop
3,905,878 1,937,224 usb_start
8,589,357 4,683,479 tftp_start
8,589,375 18 id=80
8,589,377 2 eth_start
12,431,332 3,841,955 id=81
12,431,418 86 id=82
12,431,422 4 id=84
12,431,424 2 tftp_done
19,779,487 7,348,063 bootm_start
19,779,495 8 id=1
19,859,458 79,963 id=2
19,859,477 19 id=3
20,640,914 781,437 id=4
20,640,916 2 id=5
20,640,928 12 id=6
21,363,191 722,263 id=7
21,363,194 3 id=8
21,363,208 14 id=15
21,931,687 568,479 start_kernel
Accumulated time:
154,844 lcd
Stashed 27 records
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log:
-------------------------------------------------
smc911x: MAC 08:00:08:1e:0f:44
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.138
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-vzsRBf/tmpDGED2B-uImage
tftp 0x00100000 tmp/snowball-vzsRBf/tmpDGED2B-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.138
Filename 'tmp/snowball-vzsRBf/tmpDGED2B-uImage'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
#################################################################
##########################################################
done
Bytes transferred = 3711969 (38a3e1 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000
bootm 0x00100000
## Booting kernel from Legacy Image at 00100000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3711905 Bytes = 3.5 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board snowball-u8500_defconfig failure log:
-------------------------------------------------
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 28
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.138
U8500 $ setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
U8500 $ tftp 0x00100000 tmp/snowball-gloDkR/tmpcSxlwz-uImage
tftp 0x00100000 tmp/snowball-gloDkR/tmpcSxlwz-uImage
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.138
Filename 'tmp/snowball-gloDkR/tmpcSxlwz-uImage'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
########node: snowball status: on
#########################################################
#####
done
Bytes transferred = 2934657 (2cc781 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ bootm 0x00100000
bootm 0x00100000
## Booting kernel from Legacy Image at 00100000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2934593 Bytes = 2.8 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log:
-------------------------------------------------
setenv serverip 172.16.1.3
Tegra20 (TrimSlice) # tftp 0x800000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
tftp 0x800000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage'.
Load address: 0x800000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
2.8 MiB/s
done
Bytes transferred = 3676392 (3818e8 hex)
Tegra20 (TrimSlice) # setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
Tegra20 (TrimSlice) # tftp 0x1800000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb
tftp 0x1800000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb
Using asx0 device
TFTP from server 172.16.1.3; our IP address is 172.16.1.129
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/tegra20-trimslice.dtb'.
Load address: 0x1800000
Loading: *##
858.4 KiB/s
done
Bytes transferred = 20236 (4f0c hex)
Tegra20 (TrimSlice) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw
Tegra20 (TrimSlice) # bootz 0x800000 - 0x1800000
bootz 0x800000 - 0x1800000
Kernel image @ 0x800000 [ 0x000000 - 0x3818e8 ]
## Flattened Device Tree blob at 01800000
Booting using the fdt blob at 0x1800000
Loading Device Tree to 0fff8000, end 0fffff0b ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-imx_v6_v7_defconfig failure log:
-------------------------------------------------
tftp 0x10800000 mainline/v3.13-8989-g4db658e/imx_v6_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-8989-g4db658e/imx_v6_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
################
5.8 MiB/s
done
Bytes transferred = 4999352 (4c48b8 hex)
=> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
=> tftp 0x11000000 mainline/v3.13-8989-g4db658e/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb
tftp 0x11000000 mainline/v3.13-8989-g4db658e/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-8989-g4db658e/imx_v6_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *###
4.7 MiB/s
done
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4c48b8 ]
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log:
-------------------------------------------------
=> tftp 0x10800000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
tftp 0x10800000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/zImage'.
Load address: 0x10800000
Loading: *#################################################################
#################################################################
#################################################################
########################################################
6.1 MiB/s
done
Bytes transferred = 3676392 (3818e8 hex)
=> setenv serverip 172.16.1.3
setenv serverip 172.16.1.3
=> tftp 0x11000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
tftp 0x11000000 mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.3; our IP address is 172.16.1.172
Filename 'mainline/v3.13-8989-g4db658e/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'.
Load address: 0x11000000
Loading: *###
1.4 MiB/s
done
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv boonode: wandboard status: on
targs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> bootz 0x10800000 - 0x11000000
bootz 0x10800000 - 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x3818e8 ]
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: timeout
11 years, 4 months
- 1
- 0
mainline build: 7 warnings 1 failures (mainline/v3.13-8989-g4db658e)
by Olof's autobuilder
Here are the build results from automated periodic testing.
The tree being built was mainline, found at:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch)
Topmost commit:
4db658e ceph: Fix up after semantic merge conflict
Build logs (stderr only) can be found at the following link (experimental):
http://arm-soc.lixom.net/buildlogs/mainline/v3.13-8989-g4db658e/
Runtime: 17m 18s
Passed: 122
Failed: 1
Warnings: 7
Section mismatches: 0
-------------------------------------------------------------------------------
Failed defconfigs:
tegra_defconfig
-------------------------------------------------------------------------------
Errors:
tegra_defconfig:
drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration]
Warnings:
1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable]
1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable]
1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable]
1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function]
1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function]
2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function]
Section mismatches:
11 years, 4 months
- 1
- 0
arm-soc boot: 32 pass, 4 fail (v3.13-8989-gec67fd5)
by Kevin's boot bot
Automated DT boot report for various ARM defconfigs.
Tree/Branch: arm-soc
Git describe: v3.13-8989-gec67fd5
Failed boot tests (console logs at the end)
===========================================
armada-370-mirabox: FAIL: multi_v7_defconfig
armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig
armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig
armada-370-mirabox: FAIL: mvebu_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
am335x-boneblack PASS: 0 min 25.7 sec
omap3-beagle-xm PASS: 0 min 56.4 sec
am335x-bone PASS: 0 min 27.3 sec
omap4-panda PASS: 1 min 6.6 sec
omap4-panda-es PASS: 1 min 8.7 sec
omap3-tobi,3730storm PASS: 0 min 25.3 sec
omap3-tobi,3530overo PASS: 0 min 23.0 sec
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2 PASS: 0 min 13.9 sec
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec
imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec
imx6q-wandboard PASS: 0 min 17.2 sec
sunxi_defconfig
---------------
sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec
sun4i-a10-cubieboard PASS: 0 min 17.0 sec
bcm_defconfig
-------------
bcm28155-ap PASS: 0 min 58.7 sec
exynos_defconfig
----------------
exynos5250-arndale PASS: 0 min 28.0 sec
multi_v7_defconfig
------------------
ste-snowball PASS: 0 min 32.7 sec
tegra30-beaver PASS: 0 min 16.7 sec
am335x-boneblack PASS: 0 min 22.6 sec
omap3-beagle-xm PASS: 0 min 56.4 sec
sun7i-a20-cubieboard2 PASS: 0 min 13.8 sec
armada-370-mirabox FAIL: 0 min 31.6 sec
omap4-panda PASS: 1 min 5.7 sec
omap4-panda-es PASS: 1 min 7.8 sec
armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec
sun4i-a10-cubieboard PASS: 0 min 16.6 sec
bcm28155-ap PASS: 0 min 58.8 sec
imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec
am335x-bone PASS: 0 min 30.2 sec
imx6q-wandboard PASS: 0 min 16.4 sec
omap3-tobi,3730storm PASS: 0 min 23.3 sec
imx6dl-wandboard,wand-dual PASS: 0 min 17.3 sec
omap3-tobi,3530overo PASS: 0 min 23.7 sec
u8500_defconfig
---------------
ste-snowball PASS: 0 min 30.3 sec
sama5_defconfig
---------------
sama5d35ek PASS: 0 min 17.5 sec
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec
armada-370-mirabox FAIL: 0 min 31.6 sec
Console logs for failures
=========================
multi_v7_defconfig
------------------
armada-370-mirabox: FAIL: last 24 lines of boot log:
----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.60 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.58 seconds.
# PYBOOT: Result: FAIL
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.56 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.56 seconds.
# PYBOOT: Result: FAIL
11 years, 4 months
- 1
- 0
arm-soc boot: 25 passed 0 failed (arm-soc/v3.13-8989-gec67fd5)
by Olof's autobooter
Failed boards:
beaver tegra_defconfig : BUILD FAILED
dalmore tegra_defconfig : BUILD FAILED
seaboard tegra_defconfig : BUILD FAILED
trimslice tegra_defconfig : BUILD FAILED
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:11.26
arndale exynos_defconfig : passed 1:09.20
bbb omap2plus_defconfig : passed 1:37.81
bbb multi_v7_defconfig : passed 1:20.16
beaver multi_v7_defconfig : passed 0:42.26
capri bcm_defconfig : passed 0:43.84
capri multi_v7_defconfig : passed 0:43.05
cubie sunxi_defconfig : passed 0:54.19
cubie multi_v7_defconfig : passed 0:56.55
cubie2 sunxi_defconfig : passed 0:52.94
cubie2 multi_v7_defconfig : passed 1:03.38
cubie2 multi_lpae_defconfig : passed 0:47.92
cubox dove_defconfig : warnings 1:11.87
dalmore multi_v7_defconfig : passed 1:02.96
dalmore multi_lpae_defconfig : passed 1:00.40
panda omap2plus_defconfig : passed 1:19.30
panda multi_v7_defconfig : passed 1:16.92
sama5 sama5_defconfig : passed 1:52.30
seaboard multi_v7_defconfig : passed 0:52.38
snow exynos_defconfig : passed 1:23.24
snowball u8500_defconfig : passed 2:25.25
snowball multi_v7_defconfig : passed 1:06.19
trimslice multi_v7_defconfig : passed 0:46.66
wandboard imx_v6_v7_defconfig : passed 0:55.78
wandboard multi_v7_defconfig : passed 0:55.42
Board legend is available at http://arm-soc.lixom.net/boards.html
11 years, 4 months
- 1
- 0
arm-soc build: 7 warnings 1 failures (arm-soc/v3.13-8989-gec67fd5)
by Olof's autobuilder
Here are the build results from automated periodic testing.
The tree being built was arm-soc, found at:
http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch)
Topmost commit:
ec67fd5 memblock: Add limit checking to memblock_virt_alloc
Build logs (stderr only) can be found at the following link (experimental):
http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-8989-gec67fd5/
Runtime: 41m 35s
Passed: 122
Failed: 1
Warnings: 7
Section mismatches: 0
-------------------------------------------------------------------------------
Failed defconfigs:
tegra_defconfig
-------------------------------------------------------------------------------
Errors:
tegra_defconfig:
drivers/gpu/drm/tegra/dc.c:1069:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/dc.c:1091:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/hdmi.c:1182:2: error: implicit declaration of function 'drm_debugfs_create_files' [-Werror=implicit-function-declaration]
drivers/gpu/drm/tegra/hdmi.c:1204:2: error: implicit declaration of function 'drm_debugfs_remove_files' [-Werror=implicit-function-declaration]
Warnings:
1 drivers/gpu/host1x/debug.c:30:14: warning: 'host1x_debug_force_timeout_pid' defined but not used [-Wunused-variable]
1 drivers/gpu/host1x/debug.c:31:12: warning: 'host1x_debug_force_timeout_val' defined but not used [-Wunused-variable]
1 drivers/gpu/host1x/debug.c:32:12: warning: 'host1x_debug_force_timeout_channel' defined but not used [-Wunused-variable]
1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function]
1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function]
2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function]
Section mismatches:
11 years, 4 months
- 1
- 0
mainline boot: 15 pass, 21 fail (v3.13-8988-gd891ea2)
by Kevin's boot bot
Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline
Git describe: v3.13-8988-gd891ea2
Failed boot tests (console logs at the end)
===========================================
omap4-panda: FAIL: omap2plus_defconfig
omap4-panda-es: FAIL: omap2plus_defconfig
sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig
imx6q-wandboard: FAIL: imx_v6_v7_defconfig
sun7i-a20-cubieboard2: FAIL: sunxi_defconfig
sun4i-a10-cubieboard: FAIL: sunxi_defconfig
exynos5250-arndale: FAIL: exynos_defconfig
ste-snowball: FAIL: multi_v7_defconfig
tegra30-beaver: FAIL: multi_v7_defconfig
sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig
armada-370-mirabox: FAIL: multi_v7_defconfig
omap4-panda: FAIL: multi_v7_defconfig
omap4-panda-es: FAIL: multi_v7_defconfig
armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig
sun4i-a10-cubieboard: FAIL: multi_v7_defconfig
bcm28155-ap: FAIL: multi_v7_defconfig
imx6q-wandboard: FAIL: multi_v7_defconfig
imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig
ste-snowball: FAIL: u8500_defconfig
armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig
armada-370-mirabox: FAIL: mvebu_defconfig
Full Report
===========
omap2plus_defconfig
-------------------
am335x-boneblack PASS: 0 min 25.7 sec
omap3-beagle-xm PASS: 1 min 1.0 sec
am335x-bone PASS: 0 min 27.7 sec
omap4-panda FAIL: 0 min 57.4 sec
omap4-panda-es FAIL: 1 min 4.7 sec
omap3-tobi,3730storm PASS: 0 min 25.0 sec
omap3-tobi,3530overo PASS: 0 min 22.9 sec
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2 FAIL: 0 min 19.7 sec
imx_v6_v7_defconfig
-------------------
imx6dl-wandboard,wand-dual PASS: 0 min 19.1 sec
imx6dl-wandboard,wand-solo PASS: 0 min 18.8 sec
imx6q-wandboard FAIL: 0 min 21.0 sec
sunxi_defconfig
---------------
sun7i-a20-cubieboard2 FAIL: 0 min 17.8 sec
sun4i-a10-cubieboard FAIL: 0 min 19.0 sec
bcm_defconfig
-------------
bcm28155-ap PASS: 1 min 4.2 sec
exynos_defconfig
----------------
exynos5250-arndale FAIL: 0 min 31.4 sec
multi_v7_defconfig
------------------
ste-snowball FAIL: 0 min 32.4 sec
tegra30-beaver FAIL: 0 min 23.9 sec
am335x-boneblack PASS: 0 min 22.6 sec
omap3-beagle-xm PASS: 0 min 54.3 sec
sun7i-a20-cubieboard2 FAIL: 0 min 19.4 sec
armada-370-mirabox FAIL: 0 min 31.6 sec
omap4-panda FAIL: 0 min 54.2 sec
omap4-panda-es FAIL: 1 min 0.2 sec
armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec
sun4i-a10-cubieboard FAIL: 0 min 19.1 sec
bcm28155-ap FAIL: 16 min 14.1 sec
imx6dl-wandboard,wand-solo PASS: 0 min 17.4 sec
am335x-bone PASS: 0 min 25.3 sec
imx6q-wandboard FAIL: 0 min 20.7 sec
omap3-tobi,3730storm PASS: 0 min 23.3 sec
imx6dl-wandboard,wand-dual FAIL: 0 min 22.1 sec
omap3-tobi,3530overo PASS: 0 min 20.8 sec
u8500_defconfig
---------------
ste-snowball FAIL: 0 min 31.3 sec
sama5_defconfig
---------------
sama5d35ek PASS: 0 min 24.2 sec
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4 FAIL: 0 min 31.5 sec
armada-370-mirabox FAIL: 0 min 31.6 sec
Console logs for failures
=========================
omap2plus_defconfig
-------------------
omap4-panda: FAIL: last 24 lines of boot log:
---------------------------------------------
3.9 KiB/s
done
Bytes transferred = 20616 (5088 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f08087
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 57.36 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
------------------------------------------------
2 KiB/s
done
Bytes transferred = 20856 (5178 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f08177
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 64.73 seconds.
# PYBOOT: Result: FAIL
multi_lpae_defconfig
--------------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
-------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i#bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3867a8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.66 seconds.
# PYBOOT: Result: FAIL
imx_v6_v7_defconfig
-------------------
imx6q-wandboard: FAIL: last 24 lines of boot log:
-------------------------------------------------
Bytes transferred = 34380 (864c hex)
=>printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x4c48b8 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 21.00 seconds.
# PYBOOT: Result: FAIL
sunxi_defconfig
---------------
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
-------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i#bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 17.75 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x1af928 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.00 seconds.
# PYBOOT: Result: FAIL
exynos_defconfig
----------------
exynos5250-arndale: FAIL: last 24 lines of boot log:
----------------------------------------------------
Connected to arndale console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(arndale console)> hardreset
(user:khilman) Reboot arndale
Reboot: arndale ; phidget 2 0 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.38 seconds.
# PYBOOT: Result: FAIL
multi_v7_defconfig
------------------
ste-snowball: FAIL: last 24 lines of boot log:
----------------------------------------------
#################################################################
##########################################################
done
Bytes transferred = 3711969 (38a3e1 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $bootm 0x00800000
bootm 0x00800000
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3711905 Bytes = 3.5 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 32.40 seconds.
# PYBOOT: Result: FAIL
tegra30-beaver: FAIL: last 24 lines of boot log:
------------------------------------------------
Bytes transferred = 23808 (5d00 hex)
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 debug earlyprintk
Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000
bootz 0x81000000 0x82000000 0x83000000
Kernel image @ 0x81000000 [ 0x000000 - 0x3818e8 ]
## Loading init Ramdisk from Legacy Image at 82000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
Booting using the fdt blob at 0x83000000
Using Device Tree in place at 83000000, end 83008cff
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 23.93 seconds.
# PYBOOT: Result: FAIL
sun7i-a20-cubieboard2: FAIL: last 24 lines of boot log:
-------------------------------------------------------
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun7i#bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ff9000, end 40ffefbb ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.42 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.64 seconds.
# PYBOOT: Result: FAIL
omap4-panda: FAIL: last 24 lines of boot log:
---------------------------------------------
2.9 KiB/s
done
Bytes transferred = 20616 (5088 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda # bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f08087
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 54.17 seconds.
# PYBOOT: Result: FAIL
omap4-panda-es: FAIL: last 24 lines of boot log:
------------------------------------------------
2 KiB/s
done
Bytes transferred = 20856 (5178 hex)
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
Panda #bootz 0x82000000 0x81000000 0x81f00000
bootz 0x82000000 0x81000000 0x81f00000
## Loading init Ramdisk from Legacy Image at 81000000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 81f00000
Booting using the fdt blob at 0x81f00000
Using Device Tree in place at 81f00000, end 81f08177
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 60.18 seconds.
# PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.61 seconds.
# PYBOOT: Result: FAIL
sun4i-a10-cubieboard: FAIL: last 24 lines of boot log:
------------------------------------------------------
sun4i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
sun4i# bootz 0x40008000 0x42000000 0x41000000
bootz 0x40008000 0x42000000 0x41000000
Kernel image @ 0x40008000 [ 0x000000 - 0x3818e8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name:
Created: 2013-09-07 5:02:12 UTC
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
Booting using the fdt blob at 0x41000000
Loading Device Tree to 40ffa000, end 40fffa74 ... OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 19.11 seconds.
# PYBOOT: Result: FAIL
bcm28155-ap: FAIL: last 24 lines of boot log:
---------------------------------------------
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__
_call(self.context, command, ignore_failure, timeout)
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call
context.run_command(cmd, failok=ignore_failure)
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command
rc = subprocess.check_call(command, **output_args)
File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
raise CalledProcessError(retcode, cmd)
CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124
<LAVA_DISPATCHER>2014-01-28 08:28:59 PM INFO: CriticalError
<LAVA_DISPATCHER>2014-01-28 08:28:59 PM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.).
ErrorMessage: Failed to boot test image.
Lava failed at action boot_linaro_image with error:Failed to boot test image.
Traceback (most recent call last):
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run
action.run(**params)
File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run
raise CriticalError("Failed to boot test image.")
CriticalError: Failed to boot test image.
Reboot: capri ; ip9258 1 3 : ['off']
<LAVA_DISPATCHER>2014-01-28 08:28:59 PM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'}
<LAVA_DISPATCHER>2014-01-28 08:28:59 PM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/d34102da65e9e73bcdcc74ca13e94f42…
LBOOT: Result: FAIL
LBOOT: Time: 974.08 seconds.
imx6q-wandboard: FAIL: last 24 lines of boot log:
-------------------------------------------------
Bytes transferred = 34380 (864c hex)
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
Kernel image @ 0x10800000 [ 0x000000 - 0x3818e8 ]
## Loading init Ramdisk from Legacy Image at 11100000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100b64b
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 20.66 seconds.
# PYBOOT: Result: FAIL
imx6dl-wandboard,wand-dual: FAIL: last 24 lines of boot log:
------------------------------------------------------------
1.4 MiB/s
done
Bytes transferred = 32741 (7fe5 hex)
=>printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.165:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
=> bootz 0x10800000 0x11100000 0x11000000
bootz 0x10800000 0x11100000 0x11000000
## Loading init Ramdisk from Legacy Image at 11100000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 639744 Bytes = 624.8 KiB
Load Address: 81000000
Entry Point: 81000000
## Flattened Device Tree blob at 11000000
Booting using the fdt blob at 0x11000000
Using Device Tree in place at 11000000, end 1100afe4
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 22.09 seconds.
# PYBOOT: Result: FAIL
u8500_defconfig
---------------
ste-snowball: FAIL: last 24 lines of boot log:
----------------------------------------------
#################################################################
#####
done
Bytes transferred = 2934657 (2cc781 hex)
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none
U8500 $ bootm 0x00800000
bootm 0x00800000
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2934593 Bytes = 2.8 MB
Load Address: 00008000
Entry Point: 00008000
Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
# PYBOOT: Exception: kernel: ERROR: did not start booting.
# PYBOOT: Time: 31.27 seconds.
# PYBOOT: Result: FAIL
mvebu_defconfig
---------------
armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log:
------------------------------------------------------------
Connected to obsax3 console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(obsax3 console)> hardreset
(user:khilman) Reboot obsax3
Reboot: obsax3 ; ip9258 1 4 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.54 seconds.
# PYBOOT: Result: FAIL
armada-370-mirabox: FAIL: last 24 lines of boot log:
----------------------------------------------------
Connected to mirabox console [channel connected] (~$quit to exit)
(user:khilman) is already connected
~$hardreset
Command(mirabox console)> hardreset
(user:khilman) Reboot mirabox
Reboot: mirabox ; ip9258 1 1 : off, sleep, on
~$off
# PYBOOT: Exception: ERROR: Could not break into autoboot.
# PYBOOT: Time: 31.57 seconds.
# PYBOOT: Result: FAIL
11 years, 4 months
- 1
- 0