January 2014 - Kernel-build-reports

mainline build: 11 warnings 0 failures (mainline/v3.13-rc7-126-g228fdc0)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 228fdc0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-rc7-126-g228fdc0/ Runtime: 23m 31s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2140:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

11 years, 4 months

1
0
0 0

mainline boot: 28 passed 0 failed (mainline/v3.13-rc7-101-g324c66f)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.27 arndale exynos_defconfig : passed 1:01.07 bbb omap2plus_defconfig : passed 1:31.48 bbb multi_v7_defconfig : passed 1:20.53 beaver tegra_defconfig : passed 0:55.39 beaver multi_v7_defconfig : passed 0:43.86 capri bcm_defconfig : passed 0:45.39 capri multi_v7_defconfig : passed 0:41.57 cubie sunxi_defconfig : passed 0:50.36 cubie multi_v7_defconfig : passed 0:52.42 cubie2 sunxi_defconfig : passed 0:54.13 cubie2 multi_v7_defconfig : passed 1:08.71 cubie2 multi_lpae_defconfig : passed 0:50.42 cubox dove_defconfig : passed 1:02.83 dalmore tegra_defconfig : passed 1:18.54 dalmore multi_v7_defconfig : passed 1:04.27 dalmore multi_lpae_defconfig : passed 1:02.20 panda omap2plus_defconfig : passed 1:16.08 panda multi_v7_defconfig : passed 1:04.74 seaboard tegra_defconfig : passed 1:04.75 seaboard multi_v7_defconfig : passed 0:55.81 snow exynos_defconfig : passed 1:18.91 snowball u8500_defconfig : passed 1:27.06 snowball multi_v7_defconfig : passed 1:05.35 trimslice tegra_defconfig : passed 0:58.45 trimslice multi_v7_defconfig : passed 0:48.62 wandboard imx_v6_v7_defconfig : passed 0:57.40 wandboard multi_v7_defconfig : passed 0:50.44 Board legend is available at http://arm-soc.lixom.net/boards.html

11 years, 4 months

1
0
0 0

arm-soc boot: 31 pass, 1 fail (v3.13-rc5-1099-g16c2a53)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.13-rc5-1099-g16c2a53 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.8 sec omap3-beagle-xm PASS: 1 min 1.6 sec am335x-bone PASS: 0 min 31.7 sec omap4-panda PASS: 1 min 10.0 sec omap4-panda-es PASS: 1 min 10.2 sec omap3-tobi,3730storm PASS: 0 min 24.1 sec omap3-tobi,3530overo PASS: 0 min 21.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec imx6q-wandboard PASS: 0 min 16.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.2 sec tegra30-beaver PASS: 0 min 24.8 sec am335x-boneblack PASS: 0 min 25.5 sec omap3-beagle-xm PASS: 0 min 50.8 sec sun7i-a20-cubieboard2 PASS: 0 min 13.4 sec armada-370-mirabox PASS: 0 min 21.4 sec omap4-panda PASS: 1 min 11.7 sec omap4-panda-es FAIL: 1 min 46.9 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone PASS: 0 min 24.3 sec imx6q-wandboard PASS: 0 min 16.6 sec omap3-tobi,3730storm PASS: 0 min 23.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.6 sec omap3-tobi,3530overo PASS: 0 min 20.7 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 28.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 1.612579] Power Management for TI OMAP4. [ 1.616882] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.624023] Registering SWP/SWPB emulation handler [ 1.630157] vwl1271: 1800 mV [ 1.636596] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.646148] twl 0-0048: PIH (irq 39) nested IRQs [ 1.652404] twl_rtc rtc.11: Enabling TWL-RTC [ 1.659301] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.666137] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.672149] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.678192] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.684173] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.689697] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.695007] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.700042] VDAC: 1800 mV [ 1.700042] VANA: 2100 mV [ 1.707092] VCXIO: 1800 mV [ 1.710388] VUSB: 3300 mV [ 1.713867] V1V8: 1800 mV [ 1.717376] V2V1: 2100 mV ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 106.93 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

1
0
0 0

mainline build: 11 warnings 0 failures (mainline/v3.13-rc7-101-g324c66f)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 324c66f Merge branch 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-rc7-101-g324c66f/ Runtime: 14m 53s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2140:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

11 years, 4 months

1
0
0 0

arm-soc boot: 28 passed 1 failed (arm-soc/v3.13-rc5-1099-g16c2a53)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 1:32.11 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.88 arndale exynos_defconfig : passed 1:06.47 bbb omap2plus_defconfig : passed 1:34.76 bbb multi_v7_defconfig : passed 1:21.54 beaver tegra_defconfig : passed 0:52.30 beaver multi_v7_defconfig : passed 0:54.50 capri bcm_defconfig : passed 0:43.23 capri multi_v7_defconfig : passed 0:44.49 cubie sunxi_defconfig : passed 0:51.28 cubie multi_v7_defconfig : passed 0:57.13 cubie2 sunxi_defconfig : passed 0:50.31 cubie2 multi_v7_defconfig : passed 0:58.46 cubie2 multi_lpae_defconfig : passed 0:50.10 cubox dove_defconfig : warnings 1:01.47 dalmore tegra_defconfig : passed 1:20.16 dalmore multi_v7_defconfig : passed 1:16.58 dalmore multi_lpae_defconfig : passed 1:19.36 panda omap2plus_defconfig : passed 1:17.50 sama5 sama5_defconfig : passed 1:54.01 seaboard tegra_defconfig : passed 1:03.31 seaboard multi_v7_defconfig : passed 1:10.58 snow exynos_defconfig : passed 1:18.49 snowball u8500_defconfig : passed 1:23.14 snowball multi_v7_defconfig : passed 2:15.41 trimslice tegra_defconfig : passed 1:00.18 trimslice multi_v7_defconfig : passed 0:56.45 wandboard imx_v6_v7_defconfig : passed 1:01.53 wandboard multi_v7_defconfig : passed 1:05.09 Board legend is available at http://arm-soc.lixom.net/boards.html Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.428039] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.435333] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.442687] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.450286] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 1.457916] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 1.465515] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.471405] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 1.478729] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 1.486083] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.493743] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.500579] usbcore: registered new interface driver usbhid [ 1.506439] usbhid: USB HID core driver [ 1.513458] TCP: cubic registered [ 1.516967] NET: Registered protocol family 17 [ 1.521820] Key type dns_resolver registered [ 1.526702] Power Management for TI OMAP4+ devices. [ 1.531890] Power Management for TI OMAP4. [ 1.536193] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.543304] Registering SWP/SWPB emulation handler [ 1.549194] vwl1271: 1800 mV [ 1.553619] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.563293] twl 0-0048: PIH (irq 39) nested IRQs [ 1.568908] twl_rtc rtc.11: Power up reset detected. [ 1.574737] twl_rtc rtc.11: Enabling TWL-RTC [ 1.581756] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.588531] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.594543] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.600555] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.606628] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.612060] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.617431] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.622772] VDAC: 1800 mV [ 1.622772] VANA: 2100 mV [ 1.629425] VCXIO: 1800 mV [ 1.629425] VUSB: 3300 mV [ 1.636169] V1V8: 1800 mV [ 1.639678] V2V1: 2100 mV [ 1.735687] usb 1-1: new high-speed USB device number 2 using ehci-omap ~$off # PYBOOT: Exception: timeout

11 years, 4 months

1
0
0 0

arm-soc build: 55 warnings 0 failures (arm-soc/v3.13-rc5-1099-g16c2a53)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 16c2a53 Merge branch 'next/fixes-non-critical' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-rc5-1099-g16c2a53/ Runtime: 21m 45s Passed: 123 Failed: 0 Warnings: 55 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2138:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:201:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:209:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:299:28: warning: unused variable 'ops' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:346:28: warning: unused variable 'ops' [-Wunused-variable] Section mismatches:

11 years, 4 months

1
0
0 0

arm-soc boot: 30 pass, 2 fail (v3.13-rc5-1096-g00b1cb6)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.13-rc5-1096-g00b1cb6 Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.8 sec omap3-beagle-xm PASS: 0 min 59.5 sec am335x-bone PASS: 0 min 31.6 sec omap4-panda PASS: 1 min 9.1 sec omap4-panda-es PASS: 1 min 13.1 sec omap3-tobi,3730storm PASS: 0 min 24.1 sec omap3-tobi,3530overo PASS: 0 min 21.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.9 sec imx6q-wandboard PASS: 0 min 16.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.1 sec tegra30-beaver PASS: 0 min 19.4 sec am335x-boneblack PASS: 0 min 25.5 sec omap3-beagle-xm PASS: 0 min 50.3 sec sun7i-a20-cubieboard2 PASS: 0 min 13.5 sec armada-370-mirabox PASS: 0 min 21.4 sec omap4-panda FAIL: 1 min 48.9 sec omap4-panda-es FAIL: 1 min 47.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.2 sec am335x-bone PASS: 0 min 24.3 sec imx6q-wandboard PASS: 0 min 16.6 sec omap3-tobi,3730storm PASS: 0 min 22.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.5 sec omap3-tobi,3530overo PASS: 0 min 20.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 28.3 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 19.1 sec Console logs for failures ========================= multi_v7_defconfig ------------------ omap4-panda: FAIL: last 24 lines of boot log: --------------------------------------------- [ 1.801635] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 1.932647] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz [ 1.940551] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz [ 1.951354] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz [ 1.958892] hub 1-1:1.0: USB hub found [ 1.962951] hub 1-1:1.0: 5 ports detected [ 1.968566] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz [ 1.975280] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.982879] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.990661] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 1.999267] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.058105] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 2.065765] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 2.073425] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.113586] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.124267] mmc0: new high speed SD card at address f3c2 [ 2.124267] isa bounce pool size: 16 pages [ 2.134704] mmcblk0: mmc0:f3c2 SD02G 1.84 GiB [ 2.141204] mmcblk0: p1 p2 [ 10.452117] [sched_delayed] sched: RT throttling activated ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 108.89 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 1.562499] Power Management for TI OMAP4. [ 1.566802] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.573944] Registering SWP/SWPB emulation handler [ 1.579803] vwl1271: 1800 mV [ 1.586639] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.596008] twl 0-0048: PIH (irq 39) nested IRQs [ 1.602294] twl_rtc rtc.11: Enabling TWL-RTC [ 1.609130] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.615997] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.621978] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.627960] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.633972] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.639404] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.644744] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.649780] VDAC: 1800 mV [ 1.649780] VANA: 2100 mV [ 1.656829] VCXIO: 1800 mV [ 1.656829] VUSB: 3300 mV [ 1.663604] V1V8: 1800 mV [ 1.667144] V2V1: 2100 mV ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 107.09 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

1
0
0 0

arm-soc boot: 27 passed 1 failed (arm-soc/v3.13-rc5-1096-g00b1cb6)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 1:45.76 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.62 arndale exynos_defconfig : passed 1:08.57 bbb omap2plus_defconfig : passed 1:37.44 bbb multi_v7_defconfig : passed 1:20.00 beaver tegra_defconfig : passed 0:56.59 beaver multi_v7_defconfig : passed 0:52.72 capri bcm_defconfig : passed 0:43.18 capri multi_v7_defconfig : passed 0:43.19 cubie sunxi_defconfig : passed 0:50.58 cubie multi_v7_defconfig : passed 0:52.77 cubie2 sunxi_defconfig : passed 0:49.77 cubie2 multi_v7_defconfig : passed 0:56.92 cubie2 multi_lpae_defconfig : passed 0:50.92 cubox dove_defconfig : warnings 1:12.99 dalmore tegra_defconfig : passed 1:24.38 dalmore multi_v7_defconfig : passed 1:16.54 dalmore multi_lpae_defconfig : passed 1:17.88 panda omap2plus_defconfig : passed 1:18.48 sama5 sama5_defconfig : passed 1:57.18 seaboard tegra_defconfig : passed 1:03.03 seaboard multi_v7_defconfig : passed 1:23.57 snow exynos_defconfig : passed 1:20.89 snowball u8500_defconfig : passed 1:28.60 trimslice tegra_defconfig : passed 1:03.70 trimslice multi_v7_defconfig : passed 1:00.49 wandboard imx_v6_v7_defconfig : passed 1:00.97 wandboard multi_v7_defconfig : passed 1:07.97 Board legend is available at http://arm-soc.lixom.net/boards.html Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.435363] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.442718] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.450286] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 1.457916] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 1.465545] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.471405] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 1.478729] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 1.486083] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.493774] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.500610] usbcore: registered new interface driver usbhid [ 1.506469] usbhid: USB HID core driver [ 1.513488] TCP: cubic registered [ 1.516998] NET: Registered protocol family 17 [ 1.521850] Key type dns_resolver registered [ 1.526733] Power Management for TI OMAP4+ devices. [ 1.531890] Power Management for TI OMAP4. [ 1.536193] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.543334] Registering SWP/SWPB emulation handler [ 1.549194] vwl1271: 1800 mV [ 1.553436] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.563293] twl 0-0048: PIH (irq 39) nested IRQs [ 1.568908] twl_rtc rtc.11: Power up reset detected. [ 1.574737] twl_rtc rtc.11: Enabling TWL-RTC [ 1.581604] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.588378] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.594360] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.600402] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.606506] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.611877] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.617218] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.622589] VDAC: 1800 mV [ 1.622589] VANA: 2100 mV [ 1.629272] VCXIO: 1800 mV [ 1.629272] VUSB: 3300 mV [ 1.635986] V1V8: 1800 mV [ 1.639495] V2V1: 2100 mV [ 1.645080] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.726196] usb 1-1: new high-speed USB device number 2 using ehci-omap ~$off # PYBOOT: Exception: timeout

11 years, 4 months

1
0
0 0

arm-soc build: 55 warnings 0 failures (arm-soc/v3.13-rc5-1096-g00b1cb6)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 00b1cb6 Merge branch 'next/soc' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.13-rc5-1096-g00b1cb6/ Runtime: 13m 25s Passed: 123 Failed: 0 Warnings: 55 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2138:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:201:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:209:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:299:28: warning: unused variable 'ops' [-Wunused-variable] 21 drivers/pinctrl/pinconf.c:346:28: warning: unused variable 'ops' [-Wunused-variable] Section mismatches:

11 years, 4 months

1
0
0 0

mainline boot: 32 pass, 0 fail (v3.13-rc7-87-g21e20e2)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-rc7-87-g21e20e2 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.9 sec omap3-beagle-xm PASS: 0 min 57.5 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 5.0 sec omap4-panda-es PASS: 1 min 5.1 sec omap3-tobi,3730storm PASS: 0 min 24.3 sec omap3-tobi,3530overo PASS: 0 min 21.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec imx6q-wandboard PASS: 0 min 16.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 32.7 sec tegra30-beaver PASS: 0 min 17.5 sec am335x-boneblack PASS: 0 min 24.7 sec omap3-beagle-xm PASS: 1 min 0.3 sec sun7i-a20-cubieboard2 PASS: 0 min 13.1 sec armada-370-mirabox PASS: 0 min 20.7 sec omap4-panda PASS: 1 min 1.5 sec omap4-panda-es PASS: 1 min 3.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec am335x-bone PASS: 0 min 23.5 sec imx6q-wandboard PASS: 0 min 15.8 sec omap3-tobi,3730storm PASS: 0 min 22.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec omap3-tobi,3530overo PASS: 0 min 20.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 27.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec

11 years, 4 months

1
0
0 0

mainline boot: 29 passed 0 failed (mainline/v3.13-rc7-87-g21e20e2)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:22.33 arndale exynos_defconfig : passed 1:08.02 bbb omap2plus_defconfig : passed 1:37.02 bbb multi_v7_defconfig : passed 1:19.56 beaver tegra_defconfig : passed 0:56.03 beaver multi_v7_defconfig : passed 0:41.00 capri bcm_defconfig : passed 0:42.28 capri multi_v7_defconfig : passed 0:42.82 cubie sunxi_defconfig : passed 0:53.31 cubie multi_v7_defconfig : passed 0:55.33 cubie2 sunxi_defconfig : passed 0:50.55 cubie2 multi_v7_defconfig : passed 1:03.12 cubie2 multi_lpae_defconfig : passed 0:50.96 cubox dove_defconfig : passed 1:11.21 dalmore tegra_defconfig : passed 1:20.68 dalmore multi_v7_defconfig : passed 1:03.82 dalmore multi_lpae_defconfig : passed 1:02.15 panda omap2plus_defconfig : passed 1:18.00 panda multi_v7_defconfig : passed 1:11.70 sama5 sama5_defconfig : passed 2:00.23 seaboard tegra_defconfig : passed 1:00.20 seaboard multi_v7_defconfig : passed 0:52.32 snow exynos_defconfig : passed 1:20.68 snowball u8500_defconfig : passed 2:27.58 snowball multi_v7_defconfig : passed 1:10.12 trimslice tegra_defconfig : passed 0:58.92 trimslice multi_v7_defconfig : passed 0:53.93 wandboard imx_v6_v7_defconfig : passed 1:00.10 wandboard multi_v7_defconfig : passed 0:51.43 Board legend is available at http://arm-soc.lixom.net/boards.html

11 years, 4 months

1
0
0 0

mainline build: 11 warnings 0 failures (mainline/v3.13-rc7-87-g21e20e2)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 21e20e2 Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.13-rc7-87-g21e20e2/ Runtime: 15m 14s Passed: 119 Failed: 0 Warnings: 11 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/leds/leds-pwm.c:88:22: warning: unused variable 'node' [-Wunused-variable] 1 drivers/net/ethernet/ti/cpsw.c:2140:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] 1 drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'resource_size_t' [-Wformat=] 1 drivers/spi/spi-davinci.c:966:3: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t' [-Wformat=] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:123:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] 2 net/netfilter/ipvs/ip_vs_sync.c:1640:8: warning: unused variable 'ret' [-Wunused-variable] Section mismatches:

11 years, 4 months

1
0
0 0

Tegra baseline test results for v3.13-rc7

by Paul Walmsley

Here are some basic Tegra test results for Linux v3.13-rc7. Logs and other details at: http://nvt.pwsan.com/pub/linux/testlogs/test_v3.13-rc7/20140104153107/ Test summary ------------ Build: zImage: Pass: ( 2/ 2): multi_v7_defconfig, tegra_defconfig Boot to userspace: multi_v7_defconfig: Pass: ( 2/ 2): tegra114-dalmore-headless, tegra30-beaver Boot to userspace: tegra_defconfig: Pass: ( 2/ 2): tegra114-dalmore-headless, tegra30-beaver vmlinux object size (delta in bytes from test_v3.13-rc6 (802eee95bde72fd0cd0f3a5b2098375a487d1eda)): text data bss total kernel +256 +8 0 +264 multi_v7_defconfig +216 +8 0 +224 tegra_defconfig Boot-time memory difference (delta in bytes from test_v3.13-rc6 (802eee95bde72fd0cd0f3a5b2098375a487d1eda)) avail rsrvd high freed board kconfig dtb . . . . tegra114-dalmore-hea multi_v7_defconfig tegra114-dalmore . . . . tegra114-dalmore-hea tegra_defconfig tegra114-dalmore . . . . tegra30-beaver multi_v7_defconfig tegra30-beaver . . . . tegra30-beaver tegra_defconfig tegra30-beaver

11 years, 4 months

1
0
0 0

next boot: 31 pass, 1 fail (next-20140110)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140110 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 28.0 sec omap3-beagle-xm PASS: 1 min 0.9 sec am335x-bone PASS: 0 min 26.8 sec omap4-panda PASS: 1 min 9.2 sec omap4-panda-es PASS: 1 min 2.7 sec omap3-tobi,3730storm PASS: 0 min 24.4 sec omap3-tobi,3530overo PASS: 0 min 22.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.8 sec imx6q-wandboard PASS: 0 min 16.8 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.2 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.4 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 0 min 49.9 sec sun7i-a20-cubieboard2 PASS: 0 min 13.7 sec armada-370-mirabox PASS: 0 min 21.4 sec omap4-panda PASS: 0 min 53.2 sec omap4-panda-es FAIL: 1 min 46.3 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.3 sec am335x-bone PASS: 0 min 25.5 sec imx6q-wandboard PASS: 0 min 16.6 sec omap3-tobi,3730storm PASS: 0 min 23.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.5 sec omap3-tobi,3530overo PASS: 0 min 21.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 29.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec Console logs for failures ========================= multi_v7_defconfig ------------------ omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 1.591033] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.598144] Registering SWP/SWPB emulation handler [ 1.604400] vwl1271: 1800 mV [ 1.610412] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.620483] twl 0-0048: PIH (irq 39) nested IRQs [ 1.626739] twl_rtc rtc.11: Enabling TWL-RTC [ 1.633636] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.640563] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.646545] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.652587] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.658538] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.664001] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.669342] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.674346] VDAC: 1800 mV [ 1.674743] VANA: 2100 mV [ 1.681427] VCXIO: 1800 mV [ 1.681427] VUSB: 3300 mV [ 1.688201] V1V8: 1800 mV [ 1.691711] V2V1: 2100 mV [ 1.779876] usb 1-1: new high-speed USB device number 2 using ehci-omap ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 106.35 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

1
0
0 0

next boot: 29 passed 2 failed (next/next-20140110)

by Olof's autobooter

Failed boards: hummingboard multi_v7_defconfig : FAILED 0:25.97 panda multi_v7_defconfig : FAILED 1:43.38 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.00 arndale exynos_defconfig : passed 1:04.83 bbb omap2plus_defconfig : passed 1:34.00 bbb multi_v7_defconfig : passed 1:18.57 beaver tegra_defconfig : passed 0:50.93 beaver multi_v7_defconfig : passed 0:52.37 capri bcm_defconfig : passed 0:42.92 capri multi_v7_defconfig : passed 0:44.04 cubie sunxi_defconfig : passed 0:47.57 cubie multi_v7_defconfig : passed 0:49.88 cubie2 sunxi_defconfig : passed 0:50.77 cubie2 multi_v7_defconfig : passed 0:56.09 cubie2 multi_lpae_defconfig : passed 0:49.82 cubox dove_defconfig : passed 1:05.57 dalmore tegra_defconfig : passed 1:17.85 dalmore multi_v7_defconfig : passed 1:16.57 dalmore multi_lpae_defconfig : passed 1:14.62 hummingboard imx_v6_v7_defconfig : passed 1:17.11 panda omap2plus_defconfig : passed 1:19.20 sama5 sama5_defconfig : passed 1:56.36 seaboard tegra_defconfig : passed 1:00.35 seaboard multi_v7_defconfig : passed 1:05.75 snow exynos_defconfig : passed 1:21.54 snowball u8500_defconfig : passed 1:28.91 snowball multi_v7_defconfig : passed 2:10.38 trimslice tegra_defconfig : passed 0:56.21 trimslice multi_v7_defconfig : passed 0:59.44 wandboard imx_v6_v7_defconfig : passed 0:58.69 wandboard multi_v7_defconfig : passed 1:01.05 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.074850] hub 1-0:1.0: 1 port detected [ 1.079537] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.084609] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.089555] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.114880] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.121015] hub 2-0:1.0: USB hub found [ 1.124811] hub 2-0:1.0: 1 port detected [ 1.129494] mousedev: PS/2 mouse device common for all mice [ 1.136810] i2c /dev entries driver [ 1.141582] sdhci: Secure Digital Host Controller Interface driver [ 1.147817] sdhci: Copyright(c) Pierre Ossman [ 1.152674] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.158908] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.168092] mmc0: no vqmmc regulator found [ 1.214888] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.222940] usbcore: registered new interface driver usbhid [ 1.228555] usbhid: USB HID core driver [ 1.238900] TCP: cubic registered [ 1.242256] NET: Registered protocol family 17 [ 1.246944] Key type dns_resolver registered [ 1.251330] Registering SWP/SWPB emulation handler [ 1.261308] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.269625] spear_cpufreq: Invalid cpufreq_tbl [ 1.280292] ALSA device list: [ 1.283468] No soundcards found. [ 1.287631] VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0): error -6 [ 1.295412] Please append a correct "root=" boot option; here are the available partitions: [ 1.303776] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.312049] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc7-next-20140110 #1 [ 1.319571] [<c001580c>] (unwind_backtrace) from [<c00113dc>] (show_stack+0x10/0x14) [ 1.327332] [<c00113dc>] (show_stack) from [<c0582cc8>] (dump_stack+0x84/0x94) [ 1.334567] [<c0582cc8>] (dump_stack) from [<c057fca4>] (panic+0xa0/0x1f4) [ 1.341456] [<c057fca4>] (panic) from [<c0802040>] (mount_block_root+0x1a0/0x230) [ 1.348949] [<c0802040>] (mount_block_root) from [<c08021d8>] (mount_root+0x108/0x110) [ 1.356873] [<c08021d8>] (mount_root) from [<c0802338>] (prepare_namespace+0x158/0x1a0) [ 1.364886] [<c0802338>] (prepare_namespace) from [<c0801cfc>] (kernel_init_freeable+0x1cc/0x1dc) [ 1.373775] [<c0801cfc>] (kernel_init_freeable) from [<c057d130>] (kernel_init+0x8/0x120) [ 1.381966] [<c057d130>] (kernel_init) from [<c000e578>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.445617] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.451477] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.458801] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.466156] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.473724] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 1.481353] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 1.488983] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.494842] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 1.502166] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 1.509521] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.517181] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.524353] usbcore: registered new interface driver usbhid [ 1.530212] usbhid: USB HID core driver [ 1.537628] TCP: cubic registered [ 1.541137] NET: Registered protocol family 17 [ 1.545959] Key type dns_resolver registered [ 1.550903] Power Management for TI OMAP4+ devices. [ 1.556060] Power Management for TI OMAP4. [ 1.560363] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.567504] Registering SWP/SWPB emulation handler [ 1.573730] vwl1271: 1800 mV [ 1.577728] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.587646] twl 0-0048: PIH (irq 39) nested IRQs [ 1.593231] twl_rtc rtc.11: Power up reset detected. [ 1.599090] twl_rtc rtc.11: Enabling TWL-RTC [ 1.605987] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.612884] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.618865] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.624877] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.630981] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.636383] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.641754] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.646759] VDAC: 1800 mV [ 1.649993] VANA: 2100 mV [ 1.653808] VCXIO: 1800 mV [ 1.653808] VUSB: 3300 mV [ 1.660614] V1V8: 1800 mV [ 1.664062] V2V1: 2100 mV ~$off # PYBOOT: Exception: timeout

11 years, 4 months

1
0
0 0

next build: 6 warnings 1 failures (next/next-20140110)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 1955a14 Add linux-next specific files for 20140110 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140110/ Runtime: 39m 59s Passed: 122 Failed: 1 Warnings: 6 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: eseries_pxa_defconfig ------------------------------------------------------------------------------- Errors: eseries_pxa_defconfig: arch/arm/Kconfig:1965:error: recursive dependency detected! drivers/mmc/host/tmio_mmc.c:93:35: error: 'res_ctl' undeclared (first use in this function) Warnings: 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

11 years, 4 months

1
0
0 0

queue boot: 13 pass, 2 fail (v3.10.26-3-g81eeea6)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.26-3-g81eeea6 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 1 min 0.3 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 7.9 sec omap4-panda-es PASS: 1 min 4.7 sec omap3-tobi,3730storm PASS: 0 min 35.9 sec omap3-tobi,3530overo PASS: 0 min 33.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 21.7 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.6 sec armada-370-mirabox PASS: 0 min 19.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.6 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.0 sec armada-370-mirabox FAIL: 0 min 17.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275d00>] (panic+0xa0/0x1e8) [<c0275d00>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271a60>] (kernel_init+0x8/0x158) [<c0271a60>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.26-00003-g81eeea6 #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c001236c>] (handle_IPI+0x108/0x130) [<c001236c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0359f70 to 0xc0359fb8) 9f60: c1d5b6d8 00000000 000000c2 000000c2 9f80: c03604a8 c0358000 c036045c c0383b6c c027debc c0358000 c0383b6c c0358000 9fa0: 0000001f c0359fb8 c000f070 c004f970 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f970>] (cpu_startup_entry+0xfc/0x140) [<c004f970>] (cpu_startup_entry+0xfc/0x140) from [<c0328a3c>] (start_kernel+0x2c4/0x2d0) [<c0328a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 20.04 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.26-00003-g81eeea6 #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275d00>] (panic+0xa0/0x1e8) [<c0275d00>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271a60>] (kernel_init+0x8/0x158) [<c0271a60>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 17.94 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

1
0
0 0

queue boot: 9 passed 1 failed (queue/v3.10.26-3-g81eeea6)

by Olof's autobooter

Failed boards: cubie multi_v7_defconfig : FAILED 0:23.73 Successful boards: arndale exynos_defconfig : passed 1:02.39 beaver tegra_defconfig : passed 0:45.26 cubox dove_defconfig : passed 0:51.33 dalmore tegra_defconfig : passed 1:07.81 panda omap2plus_defconfig : passed 1:16.60 sama5 sama5_defconfig : passed 2:00.72 seaboard tegra_defconfig : passed 0:54.09 snow exynos_defconfig : passed 1:23.32 trimslice tegra_defconfig : passed 0:53.97 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.26-00003-g81eeea6 #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275d00>] (panic+0xa0/0x1e8) [<c0275d00>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271a60>] (kernel_init+0x8/0x158) [<c0271a60>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic

11 years, 4 months

1
0
0 0

queue build: 122 warnings 0 failures (queue/v3.10.26-3-g81eeea6)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 81eeea6 gpio-rcar: R-Car GPIO IRQ share interrupt Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.10.26-3-g81eeea6/ Runtime: 32m 11s Passed: 121 Failed: 0 Warnings: 122 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-pxa/em-x270.c:480:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:484:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:603:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/gpio/gpio-omap.c:1529:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] 1 drivers/spi/spi-pl022.c:2226:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/video/backlight/max8925_bl.c:124:41: warning: statement with no effect [-Wunused-value] 1 include/linux/clocksource.h:345:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 99 net/ipv6/udp_offload.c:88:22: warning: comparison between pointer and integer [enabled by default] Section mismatches:

11 years, 4 months

1
0
0 0

queue boot: 31 pass, 0 fail (v3.12.7)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.7 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.4 sec omap3-beagle-xm PASS: 0 min 56.3 sec am335x-bone PASS: 0 min 26.1 sec omap4-panda PASS: 1 min 3.9 sec omap4-panda-es PASS: 1 min 4.2 sec omap3-tobi,3730storm PASS: 0 min 20.4 sec omap3-tobi,3530overo PASS: 0 min 21.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.1 sec imx6q-wandboard PASS: 0 min 14.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.0 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 28.9 sec tegra30-beaver PASS: 0 min 16.2 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 59.4 sec sun7i-a20-cubieboard2 PASS: 0 min 13.0 sec armada-370-mirabox PASS: 0 min 20.7 sec omap4-panda PASS: 1 min 7.0 sec omap4-panda-es PASS: 1 min 0.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec am335x-bone PASS: 0 min 33.3 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 22.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-tobi,3530overo PASS: 0 min 20.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec

11 years, 4 months

1
0
0 0

queue boot: 24 passed 2 failed (queue/v3.12.7)

by Olof's autobooter

Failed boards: bbb omap2plus_defconfig : FAILED 1:36.42 bbb multi_v7_defconfig : FAILED 1:32.80 Successful boards: arndale exynos_defconfig : passed 1:08.08 beaver tegra_defconfig : passed 0:52.78 beaver multi_v7_defconfig : passed 0:40.24 capri bcm_defconfig : passed 0:41.44 capri multi_v7_defconfig : passed 0:40.95 cubie multi_v7_defconfig : passed 0:53.81 cubie2 multi_v7_defconfig : passed 0:50.14 cubie2 multi_lpae_defconfig : passed 0:50.02 cubox dove_defconfig : passed 0:53.90 dalmore tegra_defconfig : passed 1:20.64 dalmore multi_v7_defconfig : passed 1:03.12 dalmore multi_lpae_defconfig : passed 0:59.05 panda omap2plus_defconfig : passed 1:17.54 panda multi_v7_defconfig : passed 1:07.88 sama5 sama5_defconfig : passed 1:55.93 seaboard tegra_defconfig : passed 1:02.76 seaboard multi_v7_defconfig : passed 0:54.92 snow exynos_defconfig : passed 1:27.44 snowball u8500_defconfig : passed 1:26.95 snowball multi_v7_defconfig : passed 0:50.72 trimslice tegra_defconfig : passed 0:55.67 trimslice multi_v7_defconfig : passed 1:11.67 wandboard imx_v6_v7_defconfig : passed 0:50.71 wandboard multi_v7_defconfig : passed 0:45.14 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.245163] RPC: Registered tcp transport module. [ 0.245174] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.245957] mop500-uib: failed to get adapter i2c2 [ 0.262375] NFS: Registering the id_resolver key type [ 0.262489] Key type id_resolver registered [ 0.262504] Key type id_legacy registered [ 0.262905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.262925] io scheduler noop registered [ 0.262937] io scheduler deadline registered [ 0.263184] io scheduler cfq registered (default) [ 0.264038] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.341904] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.343784] Serial: IMX driver [ 0.344763] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.936376] console [ttyO0] enabled [ 0.941210] serial: Freescale lpuart driver [ 0.945993] [drm] Initialized drm 1.1.0 20060810 [ 0.952975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.959866] ehci-platform: EHCI generic platform driver [ 0.965540] ehci-omap: OMAP-EHCI Host Controller driver [ 0.971176] ehci-orion: EHCI orion driver [ 0.975490] SPEAr-ehci: EHCI SPEAr driver [ 0.979817] tegra-ehci: Tegra EHCI driver [ 0.984438] usbcore: registered new interface driver usb-storage [ 0.992273] mousedev: PS/2 mouse device common for all mice [ 0.999482] sdhci: Secure Digital Host Controller Interface driver [ 1.006086] sdhci: Copyright(c) Pierre Ossman [ 1.011122] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.018088] usbcore: registered new interface driver usbhid [ 1.024007] usbhid: USB HID core driver [ 1.028461] TCP: cubic registered [ 1.032884] NET: Registered protocol family 10 [ 1.038635] sit: IPv6 over IPv4 tunneling driver [ 1.044648] Key type dns_resolver registered [ 1.049345] Registering SWP/SWPB emulation handler [ 1.056599] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.062692] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.072796] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.825876] i2c /dev entries driver [ 1.830137] Driver for 1-wire Dallas network protocol. [ 1.842348] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.854809] of_get_named_gpio_flags exited with status 53 [ 1.860527] of_get_named_gpio_flags exited with status 54 [ 1.866431] of_get_named_gpio_flags exited with status 55 [ 1.872133] of_get_named_gpio_flags exited with status 56 [ 1.877965] of_get_named_gpio_flags exited with status 53 [ 1.886116] of_get_named_gpio_flags exited with status 54 [ 1.892956] of_get_named_gpio_flags exited with status 55 [ 1.899495] of_get_named_gpio_flags exited with status 56 [ 1.908285] ledtrig-cpu: registered to indicate activity on CPUs [ 1.917219] usbcore: registered new interface driver usbhid [ 1.923288] usbhid: USB HID core driver [ 1.929243] oprofile: no performance counters [ 1.937246] oprofile: using timer interrupt. [ 1.942966] TCP: cubic registered [ 1.946470] Initializing XFRM netlink socket [ 1.951110] NET: Registered protocol family 17 [ 1.955983] NET: Registered protocol family 15 [ 1.961209] Key type dns_resolver registered [ 1.965934] ThumbEE CPU extension supported. [ 1.992092] DCDC1: at 1500 mV [ 1.998666] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.007485] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.015415] LDO1: at 1800 mV [ 2.021294] LDO2: at 3300 mV [ 2.028531] LDO3: 1800 mV [ 2.034442] LDO4: at 3300 mV [ 2.040355] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.047052] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.122525] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.128968] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.139102] libphy: 4a101000.mdio: probed [ 2.143496] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.153713] Random MACID = 32:5b:49:47:d3:86 [ 2.164745] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.178801] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

11 years, 4 months

1
0
0 0

queue build: 17 warnings 0 failures (queue/v3.12.7)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 4301b7a Linux 3.12.7 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.7/ Runtime: 34m 7s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

11 years, 4 months

1
0
0 0

mainline boot: 32 pass, 0 fail (v3.13-rc7-72-g7d1c153)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.13-rc7-72-g7d1c153 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 28.0 sec omap3-beagle-xm PASS: 0 min 54.0 sec am335x-bone PASS: 0 min 26.7 sec omap4-panda PASS: 1 min 6.2 sec omap4-panda-es PASS: 1 min 5.3 sec omap3-tobi,3730storm PASS: 0 min 24.2 sec omap3-tobi,3530overo PASS: 0 min 21.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 16.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.1 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 32.4 sec tegra30-beaver PASS: 0 min 14.3 sec am335x-boneblack PASS: 0 min 24.7 sec omap3-beagle-xm PASS: 0 min 57.8 sec sun7i-a20-cubieboard2 PASS: 0 min 13.0 sec armada-370-mirabox PASS: 0 min 20.6 sec omap4-panda PASS: 1 min 3.7 sec omap4-panda-es PASS: 1 min 3.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec am335x-bone PASS: 0 min 23.5 sec imx6q-wandboard PASS: 0 min 16.8 sec omap3-tobi,3730storm PASS: 0 min 19.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.8 sec omap3-tobi,3530overo PASS: 0 min 20.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 28.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.4 sec

11 years, 4 months

1
0
0 0

mainline boot: 28 passed 0 failed (mainline/v3.13-rc7-72-g7d1c153)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:19.33 arndale exynos_defconfig : passed 1:02.43 bbb omap2plus_defconfig : passed 1:31.48 bbb multi_v7_defconfig : passed 1:15.94 beaver tegra_defconfig : passed 0:49.38 beaver multi_v7_defconfig : passed 0:41.78 capri bcm_defconfig : passed 0:44.46 capri multi_v7_defconfig : passed 0:42.84 cubie sunxi_defconfig : passed 0:50.76 cubie multi_v7_defconfig : passed 0:54.15 cubie2 sunxi_defconfig : passed 0:52.84 cubie2 multi_v7_defconfig : passed 1:02.94 cubie2 multi_lpae_defconfig : passed 0:50.10 cubox dove_defconfig : passed 1:09.51 dalmore tegra_defconfig : passed 1:22.97 dalmore multi_v7_defconfig : passed 1:03.23 dalmore multi_lpae_defconfig : passed 1:31.24 panda omap2plus_defconfig : passed 1:16.25 panda multi_v7_defconfig : passed 1:12.23 seaboard tegra_defconfig : passed 1:04.51 seaboard multi_v7_defconfig : passed 0:53.38 snow exynos_defconfig : passed 1:20.72 snowball u8500_defconfig : passed 1:26.60 snowball multi_v7_defconfig : passed 1:07.64 trimslice tegra_defconfig : passed 0:58.42 trimslice multi_v7_defconfig : passed 0:53.18 wandboard imx_v6_v7_defconfig : passed 1:04.92 wandboard multi_v7_defconfig : passed 0:54.93 Board legend is available at http://arm-soc.lixom.net/boards.html

11 years, 4 months

1
0
0 0

arm-soc boot: 31 pass, 1 fail (v3.13-rc5-1093-g76fe922)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.13-rc5-1093-g76fe922 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 27.8 sec omap3-beagle-xm PASS: 0 min 59.6 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 5.3 sec omap4-panda-es PASS: 1 min 6.9 sec omap3-tobi,3730storm PASS: 0 min 21.1 sec omap3-tobi,3530overo PASS: 0 min 21.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec imx6q-wandboard PASS: 0 min 16.8 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.2 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 16.8 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 0 min 49.7 sec sun7i-a20-cubieboard2 PASS: 0 min 16.4 sec armada-370-mirabox PASS: 0 min 21.5 sec omap4-panda PASS: 0 min 53.3 sec omap4-panda-es FAIL: 1 min 47.6 sec armada-xp-openblocks-ax3-4 PASS: 0 min 23.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.3 sec am335x-bone PASS: 0 min 24.4 sec imx6q-wandboard PASS: 0 min 16.6 sec omap3-tobi,3730storm PASS: 0 min 20.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.6 sec omap3-tobi,3530overo PASS: 0 min 20.6 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 32.0 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.5 sec Console logs for failures ========================= multi_v7_defconfig ------------------ omap4-panda-es: FAIL: last 24 lines of boot log: ------------------------------------------------ [ 1.552307] Power Management for TI OMAP4. [ 1.556640] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.563751] Registering SWP/SWPB emulation handler [ 1.569671] vwl1271: 1800 mV [ 1.576568] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.585845] twl 0-0048: PIH (irq 39) nested IRQs [ 1.592132] twl_rtc rtc.11: Enabling TWL-RTC [ 1.599090] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.605804] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.611816] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.617828] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.623809] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.629272] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.634582] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.639617] VDAC: 1800 mV [ 1.639617] VANA: 2100 mV [ 1.646606] VCXIO: 1800 mV [ 1.649963] VUSB: 3300 mV [ 1.653411] V1V8: 1800 mV [ 1.656890] V2V1: 2100 mV ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 107.62 seconds. # PYBOOT: Result: FAIL

11 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports January 2014