greybus-dev June 2025

greybus-dev@lists.linaro.org

13 participants
8 discussions

[PATCH] greybus: loopback: remove gb_loopback_async_wait_all()

by Pranav Tyagi

Remove redundant gb_loopback_async_wait_all() as connection is disabled at the beginning and no further incoming/outgoing requests are possible. Signed-off-by: Pranav Tyagi <pranav.tyagi03(a)gmail.com> --- drivers/staging/greybus/loopback.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/staging/greybus/loopback.c b/drivers/staging/greybus/loopback.c index 1f19323b0e1a..9d0d4308ad25 100644 --- a/drivers/staging/greybus/loopback.c +++ b/drivers/staging/greybus/loopback.c @@ -1110,13 +1110,6 @@ static void gb_loopback_disconnect(struct gb_bundle *bundle) gb_connection_latency_tag_disable(gb->connection); debugfs_remove(gb->file); - /* - * FIXME: gb_loopback_async_wait_all() is redundant now, as connection - * is disabled at the beginning and so we can't have any more - * incoming/outgoing requests. - */ - gb_loopback_async_wait_all(gb); - spin_lock_irqsave(&gb_dev.lock, flags); gb_dev.count--; spin_unlock_irqrestore(&gb_dev.lock, flags); -- 2.49.0

1 month

[PATCH v2] greybus: gb-beagleplay: remove unneeded calls to devm_gpiod_put()

by Bartosz Golaszewski

From: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> gb_fw_init() is only called in this driver's probe() and we abort the probing if it fails. This means that calling devm_gpiod_put() in error path is not required as devres will already manage the releasing of the resources when the device is detached. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> --- Changes in v2: - add a comment to gb_fw_init() saying it must only be called from probe() drivers/greybus/gb-beagleplay.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-) diff --git a/drivers/greybus/gb-beagleplay.c b/drivers/greybus/gb-beagleplay.c index da31f1131afc..9610f878da1b 100644 --- a/drivers/greybus/gb-beagleplay.c +++ b/drivers/greybus/gb-beagleplay.c @@ -1039,9 +1039,12 @@ static const struct fw_upload_ops cc1352_bootloader_ops = { .cleanup = cc1352_cleanup }; +/* + * Must only be called from probe() as the devres resources allocated here + * will only be released on driver detach. + */ static int gb_fw_init(struct gb_beagleplay *bg) { - int ret; struct fw_upload *fwl; struct gpio_desc *desc; @@ -1060,29 +1063,17 @@ static int gb_fw_init(struct gb_beagleplay *bg) bg->bootloader_backdoor_gpio = desc; desc = devm_gpiod_get(&bg->sd->dev, "reset", GPIOD_IN); - if (IS_ERR(desc)) { - ret = PTR_ERR(desc); - goto free_boot; - } + if (IS_ERR(desc)) + return PTR_ERR(desc); bg->rst_gpio = desc; fwl = firmware_upload_register(THIS_MODULE, &bg->sd->dev, "cc1352p7", &cc1352_bootloader_ops, bg); - if (IS_ERR(fwl)) { - ret = PTR_ERR(fwl); - goto free_reset; - } + if (IS_ERR(fwl)) + return PTR_ERR(fwl); bg->fwl = fwl; return 0; - -free_reset: - devm_gpiod_put(&bg->sd->dev, bg->rst_gpio); - bg->rst_gpio = NULL; -free_boot: - devm_gpiod_put(&bg->sd->dev, bg->bootloader_backdoor_gpio); - bg->bootloader_backdoor_gpio = NULL; - return ret; } static void gb_fw_deinit(struct gb_beagleplay *bg) -- 2.48.1

1 month, 1 week

[PATCH] greybus: gb-beagleplay: remove unneeded calls to devm_gpiod_put()

by Bartosz Golaszewski

From: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> gb_fw_init() is only called in this driver's probe() and we abort the probing if it fails. This means that calling devm_gpiod_put() in error path is not required as devres will already manage the releasing of the resources when the device is detached. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> --- drivers/greybus/gb-beagleplay.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-) diff --git a/drivers/greybus/gb-beagleplay.c b/drivers/greybus/gb-beagleplay.c index da31f1131afc..1ea48b71a030 100644 --- a/drivers/greybus/gb-beagleplay.c +++ b/drivers/greybus/gb-beagleplay.c @@ -1041,7 +1041,6 @@ static const struct fw_upload_ops cc1352_bootloader_ops = { static int gb_fw_init(struct gb_beagleplay *bg) { - int ret; struct fw_upload *fwl; struct gpio_desc *desc; @@ -1060,29 +1059,17 @@ static int gb_fw_init(struct gb_beagleplay *bg) bg->bootloader_backdoor_gpio = desc; desc = devm_gpiod_get(&bg->sd->dev, "reset", GPIOD_IN); - if (IS_ERR(desc)) { - ret = PTR_ERR(desc); - goto free_boot; - } + if (IS_ERR(desc)) + return PTR_ERR(desc); bg->rst_gpio = desc; fwl = firmware_upload_register(THIS_MODULE, &bg->sd->dev, "cc1352p7", &cc1352_bootloader_ops, bg); - if (IS_ERR(fwl)) { - ret = PTR_ERR(fwl); - goto free_reset; - } + if (IS_ERR(fwl)) + return PTR_ERR(fwl); bg->fwl = fwl; return 0; - -free_reset: - devm_gpiod_put(&bg->sd->dev, bg->rst_gpio); - bg->rst_gpio = NULL; -free_boot: - devm_gpiod_put(&bg->sd->dev, bg->bootloader_backdoor_gpio); - bg->bootloader_backdoor_gpio = NULL; - return ret; } static void gb_fw_deinit(struct gb_beagleplay *bg) -- 2.48.1

1 month, 1 week

[PATCH 01/33] tty: introduce and use tty_port_tty_vhangup() helper

by Jiri Slaby (SUSE)

This code (tty_get -> vhangup -> tty_put) is repeated on few places. Introduce a helper similar to tty_port_tty_hangup() (asynchronous) to handle even vhangup (synchronous). And use it on those places. In fact, reuse the tty_port_tty_hangup()'s code and call tty_vhangup() depending on a new bool parameter. Signed-off-by: Jiri Slaby (SUSE) <jirislaby(a)kernel.org> Cc: Karsten Keil <isdn(a)linux-pingi.de> Cc: David Lin <dtwlin(a)gmail.com> Cc: Johan Hovold <johan(a)kernel.org> Cc: Alex Elder <elder(a)kernel.org> Cc: Oliver Neukum <oneukum(a)suse.com> Cc: Marcel Holtmann <marcel(a)holtmann.org> Cc: Johan Hedberg <johan.hedberg(a)gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz(a)gmail.com> --- Cc: netdev(a)vger.kernel.org Cc: greybus-dev(a)lists.linaro.org Cc: linux-staging(a)lists.linux.dev Cc: linux-usb(a)vger.kernel.org Cc: linux-bluetooth(a)vger.kernel.org --- drivers/isdn/capi/capi.c | 8 +------- drivers/staging/greybus/uart.c | 7 +------ drivers/tty/serial/serial_core.c | 7 +------ drivers/tty/tty_port.c | 12 ++++++++---- drivers/usb/class/cdc-acm.c | 7 +------ drivers/usb/serial/usb-serial.c | 7 +------ include/linux/tty_port.h | 12 +++++++++++- net/bluetooth/rfcomm/tty.c | 7 +------ 8 files changed, 25 insertions(+), 42 deletions(-) diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c index 70dee9ad4bae..78e6e7748fb9 100644 --- a/drivers/isdn/capi/capi.c +++ b/drivers/isdn/capi/capi.c @@ -306,15 +306,9 @@ static void capincci_alloc_minor(struct capidev *cdev, struct capincci *np) static void capincci_free_minor(struct capincci *np) { struct capiminor *mp = np->minorp; - struct tty_struct *tty; if (mp) { - tty = tty_port_tty_get(&mp->port); - if (tty) { - tty_vhangup(tty); - tty_kref_put(tty); - } - + tty_port_tty_vhangup(&mp->port); capiminor_free(mp); } } diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c index 308ed1ca9947..10df5c37c83e 100644 --- a/drivers/staging/greybus/uart.c +++ b/drivers/staging/greybus/uart.c @@ -916,7 +916,6 @@ static void gb_uart_remove(struct gbphy_device *gbphy_dev) { struct gb_tty *gb_tty = gb_gbphy_get_data(gbphy_dev); struct gb_connection *connection = gb_tty->connection; - struct tty_struct *tty; int ret; ret = gbphy_runtime_get_sync(gbphy_dev); @@ -929,11 +928,7 @@ static void gb_uart_remove(struct gbphy_device *gbphy_dev) wake_up_all(&gb_tty->wioctl); mutex_unlock(&gb_tty->mutex); - tty = tty_port_tty_get(&gb_tty->port); - if (tty) { - tty_vhangup(tty); - tty_kref_put(tty); - } + tty_port_tty_vhangup(&gb_tty->port); gb_connection_disable_rx(connection); tty_unregister_device(gb_tty_driver, gb_tty->minor); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 1f7708a91fc6..d6485714eb0f 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -3209,7 +3209,6 @@ static void serial_core_remove_one_port(struct uart_driver *drv, struct uart_state *state = drv->state + uport->line; struct tty_port *port = &state->port; struct uart_port *uart_port; - struct tty_struct *tty; mutex_lock(&port->mutex); uart_port = uart_port_check(state); @@ -3228,11 +3227,7 @@ static void serial_core_remove_one_port(struct uart_driver *drv, */ tty_port_unregister_device(port, drv->tty_driver, uport->line); - tty = tty_port_tty_get(port); - if (tty) { - tty_vhangup(port->tty); - tty_kref_put(tty); - } + tty_port_tty_vhangup(port); /* * If the port is used as a console, unregister it diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 4af1fbf73f51..903eebdbe12d 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -396,15 +396,19 @@ EXPORT_SYMBOL(tty_port_hangup); * @port: tty port * @check_clocal: hang only ttys with %CLOCAL unset? */ -void tty_port_tty_hangup(struct tty_port *port, bool check_clocal) +void __tty_port_tty_hangup(struct tty_port *port, bool check_clocal, bool async) { struct tty_struct *tty = tty_port_tty_get(port); - if (tty && (!check_clocal || !C_CLOCAL(tty))) - tty_hangup(tty); + if (tty && (!check_clocal || !C_CLOCAL(tty))) { + if (async) + tty_hangup(tty); + else + tty_vhangup(tty); + } tty_kref_put(tty); } -EXPORT_SYMBOL_GPL(tty_port_tty_hangup); +EXPORT_SYMBOL_GPL(__tty_port_tty_hangup); /** * tty_port_tty_wakeup - helper to wake up a tty diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index c2ecfa3c8349..f9171fbedf5c 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1571,7 +1571,6 @@ static int acm_probe(struct usb_interface *intf, static void acm_disconnect(struct usb_interface *intf) { struct acm *acm = usb_get_intfdata(intf); - struct tty_struct *tty; int i; /* sibling interface is already cleaning up */ @@ -1598,11 +1597,7 @@ static void acm_disconnect(struct usb_interface *intf) usb_set_intfdata(acm->data, NULL); mutex_unlock(&acm->mutex); - tty = tty_port_tty_get(&acm->port); - if (tty) { - tty_vhangup(tty); - tty_kref_put(tty); - } + tty_port_tty_vhangup(&acm->port); cancel_delayed_work_sync(&acm->dwork); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 7266558d823a..c78ff40b1e5f 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1176,7 +1176,6 @@ static void usb_serial_disconnect(struct usb_interface *interface) struct usb_serial *serial = usb_get_intfdata(interface); struct device *dev = &interface->dev; struct usb_serial_port *port; - struct tty_struct *tty; /* sibling interface is cleaning up */ if (!serial) @@ -1191,11 +1190,7 @@ static void usb_serial_disconnect(struct usb_interface *interface) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; - tty = tty_port_tty_get(&port->port); - if (tty) { - tty_vhangup(tty); - tty_kref_put(tty); - } + tty_port_tty_vhangup(&port->port); usb_serial_port_poison_urbs(port); wake_up_interruptible(&port->port.delta_msr_wait); cancel_work_sync(&port->work); diff --git a/include/linux/tty_port.h b/include/linux/tty_port.h index 08f89a598366..021f9a8415c0 100644 --- a/include/linux/tty_port.h +++ b/include/linux/tty_port.h @@ -232,7 +232,7 @@ bool tty_port_carrier_raised(struct tty_port *port); void tty_port_raise_dtr_rts(struct tty_port *port); void tty_port_lower_dtr_rts(struct tty_port *port); void tty_port_hangup(struct tty_port *port); -void tty_port_tty_hangup(struct tty_port *port, bool check_clocal); +void __tty_port_tty_hangup(struct tty_port *port, bool check_clocal, bool async); void tty_port_tty_wakeup(struct tty_port *port); int tty_port_block_til_ready(struct tty_port *port, struct tty_struct *tty, struct file *filp); @@ -251,4 +251,14 @@ static inline int tty_port_users(struct tty_port *port) return port->count + port->blocked_open; } +static inline void tty_port_tty_hangup(struct tty_port *port, bool check_clocal) +{ + __tty_port_tty_hangup(port, check_clocal, true); +} + +static inline void tty_port_tty_vhangup(struct tty_port *port) +{ + __tty_port_tty_hangup(port, false, false); +} + #endif diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index 21a5b5535ebc..827dfbe66085 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -438,7 +438,6 @@ static int __rfcomm_release_dev(void __user *arg) { struct rfcomm_dev_req req; struct rfcomm_dev *dev; - struct tty_struct *tty; if (copy_from_user(&req, arg, sizeof(req))) return -EFAULT; @@ -464,11 +463,7 @@ static int __rfcomm_release_dev(void __user *arg) rfcomm_dlc_close(dev->dlc, 0); /* Shut down TTY synchronously before freeing rfcomm_dev */ - tty = tty_port_tty_get(&dev->port); - if (tty) { - tty_vhangup(tty); - tty_kref_put(tty); - } + tty_port_tty_vhangup(&dev->port); if (!test_bit(RFCOMM_TTY_OWNED, &dev->status)) tty_port_put(&dev->port); -- 2.49.0

1 month, 1 week

[PATCH] greybus: firmware: use strscpy, fix tag size

by Pranav Tyagi

Increase the size of firmware_tag arrays in the following structs from GB_FIRMWARE_U_TAG_MAX_SIZE to GB_FIRMWARE_U_TAG_MAX_SIZE + 1 to accommodate null termination: - fw_mgmt_ioc_intf_load_and_validate - fw_mgmt_ioc_get_backend_version - fw_mgmt_ioc_backend_fw_update - fw_mgmt_ioc_get_intf_version Replace strncpy() with strscpy() to ensure proper null termination as firmware_tag is interpreted as a null-terminated string and printed with %s. Signed-off-by: Pranav Tyagi <pranav.tyagi03(a)gmail.com> --- .../greybus/Documentation/firmware/firmware.c | 12 ++++++------ drivers/staging/greybus/greybus_firmware.h | 8 ++++---- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/staging/greybus/Documentation/firmware/firmware.c b/drivers/staging/greybus/Documentation/firmware/firmware.c index 765d69faa9cc..3b4061f4b34a 100644 --- a/drivers/staging/greybus/Documentation/firmware/firmware.c +++ b/drivers/staging/greybus/Documentation/firmware/firmware.c @@ -63,8 +63,8 @@ static int update_intf_firmware(int fd) intf_load.major = 0; intf_load.minor = 0; - strncpy((char *)&intf_load.firmware_tag, firmware_tag, - GB_FIRMWARE_U_TAG_MAX_SIZE); + strscpy((char *)&intf_load.firmware_tag, firmware_tag, + GB_FIRMWARE_U_TAG_MAX_SIZE + 1); ret = ioctl(fd, FW_MGMT_IOC_INTF_LOAD_AND_VALIDATE, &intf_load); if (ret < 0) { @@ -101,8 +101,8 @@ static int update_backend_firmware(int fd) /* Get Backend Firmware Version */ printf("Getting Backend Firmware Version\n"); - strncpy((char *)&backend_fw_info.firmware_tag, firmware_tag, - GB_FIRMWARE_U_TAG_MAX_SIZE); + strscpy((char *)&backend_fw_info.firmware_tag, firmware_tag, + GB_FIRMWARE_U_TAG_MAX_SIZE + 1); retry_fw_version: ret = ioctl(fd, FW_MGMT_IOC_GET_BACKEND_FW, &backend_fw_info); @@ -129,8 +129,8 @@ static int update_backend_firmware(int fd) /* Try Backend Firmware Update over Unipro */ printf("Updating Backend Firmware\n"); - strncpy((char *)&backend_update.firmware_tag, firmware_tag, - GB_FIRMWARE_U_TAG_MAX_SIZE); + strscpy((char *)&backend_update.firmware_tag, firmware_tag, + GB_FIRMWARE_U_TAG_MAX_SIZE + 1); retry_fw_update: backend_update.status = 0; diff --git a/drivers/staging/greybus/greybus_firmware.h b/drivers/staging/greybus/greybus_firmware.h index b6042a82ada4..ad5b2c8a6461 100644 --- a/drivers/staging/greybus/greybus_firmware.h +++ b/drivers/staging/greybus/greybus_firmware.h @@ -38,20 +38,20 @@ /* IOCTL support */ struct fw_mgmt_ioc_get_intf_version { - __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE]; + __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE + 1]; __u16 major; __u16 minor; } __packed; struct fw_mgmt_ioc_get_backend_version { - __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE]; + __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE + 1]; __u16 major; __u16 minor; __u8 status; } __packed; struct fw_mgmt_ioc_intf_load_and_validate { - __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE]; + __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE + 1]; __u8 load_method; __u8 status; __u16 major; @@ -59,7 +59,7 @@ struct fw_mgmt_ioc_intf_load_and_validate { } __packed; struct fw_mgmt_ioc_backend_fw_update { - __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE]; + __u8 firmware_tag[GB_FIRMWARE_U_TAG_MAX_SIZE + 1]; __u8 status; } __packed; -- 2.49.0

1 month, 2 weeks

[RFC] spi: expand bits_per_word_mask to 64 bits

by Da Xue

Most current controller IP support 64-bit words. Update the mask to u64 from u32. Signed-off-by: Da Xue <da(a)libre.computer> --- drivers/iio/adc/ad7949.c | 2 +- drivers/spi/spi-dln2.c | 2 +- drivers/spi/spi-ingenic.c | 2 +- drivers/spi/spi-sh-msiof.c | 2 +- drivers/spi/spi.c | 4 ++-- drivers/staging/greybus/spilib.c | 2 +- include/linux/spi/altera.h | 2 +- include/linux/spi/spi.h | 6 +++--- 8 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/iio/adc/ad7949.c b/drivers/iio/adc/ad7949.c index edd0c3a35ab7..469789ffa4a3 100644 --- a/drivers/iio/adc/ad7949.c +++ b/drivers/iio/adc/ad7949.c @@ -308,7 +308,7 @@ static void ad7949_disable_reg(void *reg) static int ad7949_spi_probe(struct spi_device *spi) { - u32 spi_ctrl_mask = spi->controller->bits_per_word_mask; + u64 spi_ctrl_mask = spi->controller->bits_per_word_mask; struct device *dev = &spi->dev; const struct ad7949_adc_spec *spec; struct ad7949_adc_chip *ad7949_adc; diff --git a/drivers/spi/spi-dln2.c b/drivers/spi/spi-dln2.c index 2013bc56ded8..cccbb00ad5ce 100644 --- a/drivers/spi/spi-dln2.c +++ b/drivers/spi/spi-dln2.c @@ -315,7 +315,7 @@ static int dln2_spi_set_bpw(struct dln2_spi *dln2, u8 bpw) } static int dln2_spi_get_supported_frame_sizes(struct dln2_spi *dln2, - u32 *bpw_mask) + u64 *bpw_mask) { int ret; struct { diff --git a/drivers/spi/spi-ingenic.c b/drivers/spi/spi-ingenic.c index 318b0768701e..21d453d6e46e 100644 --- a/drivers/spi/spi-ingenic.c +++ b/drivers/spi/spi-ingenic.c @@ -51,7 +51,7 @@ #define SPI_INGENIC_FIFO_SIZE 128u struct jz_soc_info { - u32 bits_per_word_mask; + u64 bits_per_word_mask; struct reg_field flen_field; bool has_trendian; diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 94a867967e02..97f5a6192279 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -33,7 +33,7 @@ #define SH_MSIOF_FLAG_FIXED_DTDL_200 BIT(0) struct sh_msiof_chipdata { - u32 bits_per_word_mask; + u64 bits_per_word_mask; u16 tx_fifo_size; u16 rx_fifo_size; u16 ctlr_flags; diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 1bc0fdbb1bd7..4f47201f2462 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -3824,8 +3824,8 @@ static int __spi_validate_bits_per_word(struct spi_controller *ctlr, u8 bits_per_word) { if (ctlr->bits_per_word_mask) { - /* Only 32 bits fit in the mask */ - if (bits_per_word > 32) + /* Only 64 bits fit in the mask */ + if (bits_per_word > 64) return -EINVAL; if (!(ctlr->bits_per_word_mask & SPI_BPW_MASK(bits_per_word))) return -EINVAL; diff --git a/drivers/staging/greybus/spilib.c b/drivers/staging/greybus/spilib.c index 24e9c909fa02..087eed1879b1 100644 --- a/drivers/staging/greybus/spilib.c +++ b/drivers/staging/greybus/spilib.c @@ -27,7 +27,7 @@ struct gb_spilib { unsigned int op_timeout; u16 mode; u16 flags; - u32 bits_per_word_mask; + u64 bits_per_word_mask; u8 num_chipselect; u32 min_speed_hz; u32 max_speed_hz; diff --git a/include/linux/spi/altera.h b/include/linux/spi/altera.h index 3b74c3750caf..d6e036ed00e2 100644 --- a/include/linux/spi/altera.h +++ b/include/linux/spi/altera.h @@ -24,7 +24,7 @@ struct altera_spi_platform_data { u16 mode_bits; u16 num_chipselect; - u32 bits_per_word_mask; + u64 bits_per_word_mask; u16 num_devices; struct spi_board_info *devices; }; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 4789f91dae94..f44120d5a63c 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -586,7 +586,7 @@ struct spi_controller { u32 buswidth_override_bits; /* Bitmask of supported bits_per_word for transfers */ - u32 bits_per_word_mask; + u64 bits_per_word_mask; #define SPI_BPW_MASK(bits) BIT((bits) - 1) #define SPI_BPW_RANGE_MASK(min, max) GENMASK((max) - 1, (min) - 1) @@ -1329,9 +1329,9 @@ spi_max_transfer_size(struct spi_device *spi) */ static inline bool spi_is_bpw_supported(struct spi_device *spi, u32 bpw) { - u32 bpw_mask = spi->controller->bits_per_word_mask; + u64 bpw_mask = spi->controller->bits_per_word_mask; - if (bpw == 8 || (bpw <= 32 && bpw_mask & SPI_BPW_MASK(bpw))) + if (bpw == 8 || (bpw <= 64 && bpw_mask & SPI_BPW_MASK(bpw))) return true; return false; -- 2.39.5

1 month, 3 weeks

[PATCH] staging: greybus: remove unnecessary GPIO line direction check

by Bartosz Golaszewski

From: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> As of commit 92ac7de3175e3 ("gpiolib: don't allow setting values on input lines"), the GPIO core makes sure values cannot be set on input lines. Remove the unnecessary check. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> --- drivers/staging/greybus/gpio.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/staging/greybus/gpio.c b/drivers/staging/greybus/gpio.c index f81c34160f720..1280530c8987a 100644 --- a/drivers/staging/greybus/gpio.c +++ b/drivers/staging/greybus/gpio.c @@ -192,12 +192,6 @@ static int gb_gpio_set_value_operation(struct gb_gpio_controller *ggc, struct gb_gpio_set_value_request request; int ret; - if (ggc->lines[which].direction == 1) { - dev_warn(dev, "refusing to set value of input gpio %u\n", - which); - return -EPERM; - } - request.which = which; request.value = value_high ? 1 : 0; ret = gb_operation_sync(ggc->connection, GB_GPIO_TYPE_SET_VALUE, -- 2.48.1

1 month, 3 weeks

[PATCH] staging : greybus : Documentation : firmware : Replace deprecated strncpy() with strscpy()

by rujra

To ensuring that the firmware_tag is properly null-terminated. When copying firmware tag strings to prevent buffer overflows and ensure data integrity. The maximum size of tag is GB_FIRMWARE_U_TAG_MAX_SIZE = 10 bytes, and it may or may not be NULL-terminated. included in "greybus_firmware.h" changes has been made at 3 positions: 1: update firmware tag 2: backend update firmware tag 3: backend update firmware tag with unipro Signed-off-by: Rujra Bhatt <braker.noob.kernel(a)gmail.com> --- drivers/staging/greybus/Documentation/firmware/firmware.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/greybus/Documentation/firmware/firmware.c b/drivers/staging/greybus/Documentation/firmware/firmware.c index 765d69faa..f37904b91 100644 --- a/drivers/staging/greybus/Documentation/firmware/firmware.c +++ b/drivers/staging/greybus/Documentation/firmware/firmware.c @@ -63,7 +63,7 @@ static int update_intf_firmware(int fd) intf_load.major = 0; intf_load.minor = 0; - strncpy((char *)&intf_load.firmware_tag, firmware_tag, + strscpy((char *)&intf_load.firmware_tag, firmware_tag, GB_FIRMWARE_U_TAG_MAX_SIZE); ret = ioctl(fd, FW_MGMT_IOC_INTF_LOAD_AND_VALIDATE, &intf_load); @@ -101,7 +101,7 @@ static int update_backend_firmware(int fd) /* Get Backend Firmware Version */ printf("Getting Backend Firmware Version\n"); - strncpy((char *)&backend_fw_info.firmware_tag, firmware_tag, + strscpy((char *)&backend_fw_info.firmware_tag, firmware_tag, GB_FIRMWARE_U_TAG_MAX_SIZE); retry_fw_version: @@ -129,7 +129,7 @@ static int update_backend_firmware(int fd) /* Try Backend Firmware Update over Unipro */ printf("Updating Backend Firmware\n"); - strncpy((char *)&backend_update.firmware_tag, firmware_tag, + strscpy((char *)&backend_update.firmware_tag, firmware_tag, GB_FIRMWARE_U_TAG_MAX_SIZE); retry_fw_update: -- 2.43.0

2 months

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

greybus-dev June 2025