- Flashbench-results - lists.linaro.org

by Andrew Bradford

andrew@piglet:~/git/flashbench$ head /sys/block/mmcblk0/device/* 2>/dev/null | grep -v ^$ ==> /sys/block/mmcblk0/device/block <== ==> /sys/block/mmcblk0/device/cid <== 1b534d303030303010f88257e100fa00 ==> /sys/block/mmcblk0/device/csd <== 400e00325b590000773b7f800a404000 ==> /sys/block/mmcblk0/device/date <== 10/2015 ==> /sys/block/mmcblk0/device/driver <== ==> /sys/block/mmcblk0/device/erase_size <== 512 ==> /sys/block/mmcblk0/device/fwrev <== 0x0 ==> /sys/block/mmcblk0/device/hwrev <== 0x1 ==> /sys/block/mmcblk0/device/manfid <== 0x00001b ==> /sys/block/mmcblk0/device/name <== 00000 ==> /sys/block/mmcblk0/device/oemid <== 0x534d ==> /sys/block/mmcblk0/device/power <== ==> /sys/block/mmcblk0/device/preferred_erase_size <== 4194304 ==> /sys/block/mmcblk0/device/scr <== 02b5800200000000 ==> /sys/block/mmcblk0/device/serial <== 0xf88257e1 ==> /sys/block/mmcblk0/device/subsystem <== ==> /sys/block/mmcblk0/device/type <== SD ==> /sys/block/mmcblk0/device/uevent <== DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=00000 MODALIAS=mmc:block root@piglet:~# cat /sys/kernel/debug/mmc0/* 2>/dev/null | grep -v ^$ 33000000 clock: 33000000 Hz actual clock: 33000000 Hz vdd: 21 (3.3 ~ 3.4 V) bus mode: 2 (push-pull) chip select: 0 (don't care) power mode: 2 (on) bus width: 2 (4 bits) timing spec: 2 (sd high-speed) signal voltage: 0 (3.30 V) driver type: 0 (driver type B) andrew@piglet:~/git/flashbench$ sudo fdisk -l /dev/mmcblk0 Disk /dev/mmcblk0: 14.9 GiB, 16003366912 bytes, 31256576 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000 Device Boot Start End Sectors Size Id Type /dev/mmcblk0p1 8192 31256575 31248384 14.9G c W95 FAT32 (LBA) andrew@piglet:~/git/flashbench$ sudo ./flashbench -a /dev/mmcblk0 --blocksize=1024 --count=100 align 4294967296 pre 398µs on 610µs post 398µs diff 212µs align 2147483648 pre 397µs on 617µs post 397µs diff 220µs align 1073741824 pre 397µs on 617µs post 398µs diff 220µs align 536870912 pre 397µs on 618µs post 397µs diff 221µs align 268435456 pre 396µs on 616µs post 397µs diff 220µs align 134217728 pre 372µs on 591µs post 398µs diff 206µs align 67108864 pre 388µs on 563µs post 350µs diff 194µs align 33554432 pre 390µs on 563µs post 351µs diff 193µs align 16777216 pre 349µs on 539µs post 351µs diff 189µs align 8388608 pre 346µs on 575µs post 400µs diff 203µs align 4194304 pre 343µs on 521µs post 343µs diff 178µs align 2097152 pre 342µs on 521µs post 344µs diff 178µs align 1048576 pre 343µs on 521µs post 344µs diff 177µs align 524288 pre 343µs on 521µs post 344µs diff 178µs align 262144 pre 343µs on 521µs post 343µs diff 178µs align 131072 pre 343µs on 520µs post 341µs diff 178µs align 65536 pre 343µs on 521µs post 343µs diff 178µs align 32768 pre 342µs on 519µs post 342µs diff 177µs align 16384 pre 343µs on 509µs post 342µs diff 166µs align 8192 pre 342µs on 342µs post 341µs diff -30ns align 4096 pre 344µs on 344µs post 343µs diff 709ns align 2048 pre 342µs on 342µs post 342µs diff 175ns ## 8 MiB eraseblocks, probably andrew@piglet:~/git/flashbench$ sudo ./flashbench /dev/mmcblk0 --open-au --erasesize=$[8*1024*1024] --blocksize=$[16*1024] --open-au-nr=1 8MiB 16.1M/s 4MiB 16.4M/s 2MiB 16.3M/s 1MiB 16.1M/s 512KiB 16.2M/s 256KiB 16M/s 128KiB 16M/s 64KiB 15.5M/s 32KiB 12.5M/s 16KiB 7.14M/s andrew@piglet:~/git/flashbench$ sudo ./flashbench /dev/mmcblk0 --open-au --erasesize=$[8*1024*1024] --blocksize=$[16*1024] --open-au-nr=10 8MiB 16.4M/s 4MiB 16.5M/s 2MiB 16.3M/s 1MiB 16.3M/s 512KiB 16.2M/s 256KiB 16M/s 128KiB 15.9M/s 64KiB 15.6M/s 32KiB 11.8M/s 16KiB 6.73M/s andrew@piglet:~/git/flashbench$ sudo ./flashbench /dev/mmcblk0 --open-au --erasesize=$[8*1024*1024] --blocksize=$[16*1024] --open-au-nr=20 8MiB 16.4M/s 4MiB 16.2M/s 2MiB 9.37M/s 1MiB 7.06M/s ^C andrew@piglet:~/git/flashbench$ sudo ./flashbench /dev/mmcblk0 --open-au --erasesize=$[8*1024*1024] --blocksize=$[16*1024] --open-au-nr=15 8MiB 16.3M/s 4MiB 15.8M/s 2MiB 9.87M/s 1MiB 7.01M/s 512KiB 4.77M/s 256KiB 2.94M/s ^C andrew@piglet:~/git/flashbench$ sudo ./flashbench /dev/mmcblk0 --open-au --erasesize=$[8*1024*1024] --blocksize=$[16*1024] --open-au-nr=12 8MiB 16.4M/s 4MiB 16.3M/s 2MiB 16.4M/s 1MiB 16.3M/s 512KiB 16.4M/s ^C andrew@piglet:~/git/flashbench$ sudo ./flashbench /dev/mmcblk0 --open-au --erasesize=$[8*1024*1024] --blocksize=$[16*1024] --open-au-nr=14 8MiB 16.4M/s 4MiB 16.4M/s 2MiB 16.4M/s 1MiB 16.4M/s 512KiB 16.3M/s 256KiB 16.3M/s 128KiB 16.1M/s ^C ## 14 open-au andrew@piglet:~/git/flashbench$ sudo ./flashbench /dev/mmcblk0 --open-au --erasesize=$[8*1024*1024] --blocksize=$[16*1024] --random --open-au-nr=1 8MiB 16.6M/s 4MiB 16.1M/s 2MiB 16.4M/s 1MiB 16.4M/s 512KiB 16.4M/s 256KiB 16.1M/s 128KiB 16.1M/s 64KiB 15.7M/s 32KiB 12.1M/s 16KiB 6.32M/s andrew@piglet:~/git/flashbench$ sudo ./flashbench /dev/mmcblk0 --open-au --erasesize=$[8*1024*1024] --blocksize=$[16*1024] --random --open-au-nr=14 8MiB 16.4M/s 4MiB 16.4M/s 2MiB 16.3M/s 1MiB 16.4M/s 512KiB 16.3M/s 256KiB 16.2M/s 128KiB 16.1M/s 64KiB 15.8M/s 32KiB 12.4M/s 16KiB 6.56M/s ## 14 open-au random, too Not quite as good as the older top of the line Samsung controllers, but still quite good and clearly better than the "evo" version. -Andrew

9 years, 5 months

1
0
0 0

RE：《生产计划与物料控制PMC实务》邀请函

by 林梓国

邀请函 ------------------ 原始邮件 ------------------ 发件人: "林梓国";<rwrtroq(a)mcmcarch.com>; 发送时间: 2016-8-15(星期一) 上午23:36:18 收件人: "flashbench-results"<flashbench-results(a)lists.linaro.org>; 主题: 转发：《生产计划与物料控制PMC实务》邀请函详细信息参考附件资料发件人: 林梓国发送时间: 2016年8月15日 9:49 收件人: flashbench-results 主题: 《生产计划与物料控制PMC实务》邀请函保密公告(CONFIDENTIALITY NOTICE): 本邮件仅为指定之个人或实体所使用，可能包含有保密信息、受特殊保护信息或为适用法律豁免披露的信息。若此邮件的读者非指定收件人，我们特此通知您请勿打印、复制、发布、散发、转发本邮件。如果此邮件误送于您，请立即联系发件人，并立即从系统中删除。谢谢。（This e-mail is intended for the use of the individual or entity to which it is addressed and may contain information that is confidential, privileged and exempt from disclosure under applicable law. If the reader of this e-mail is not the intended recipient, you are hereby notified that any printing, copying, dissemination, distribution, disclosure or forwarding of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and delete it from your system. Thank You.）

9 years, 5 months

1
0
0 0

通知；HR

by 钱先生

9 years, 6 months

1
0
0 0

RE：研发管理报名回执

by 甄经理

填写附件完成报名 ------------------ 原始邮件 ------------------ 发件人: "甄经理";<anw(a)gxmama.net>; 发送时间: 2016-8-3(星期三) 上午8:23:02 收件人: "flashbench-results"<flashbench-results(a)lists.linaro.org>; 主题: 转发：研发管理报名回执附件资料请查阅发件人: hr 发送时间: 2016年8月2日 9:49 收件人: flashbench-results 抄送: 陈生主题: 研发管理报名回执研发部门如何提高工作效率的管理探讨一、组织协同，避免缺乏组织，让事情放任自流，一盘散沙，这是产品日常管理责任人、项目负责人的责任。二、难点问题即时支援攻克，避免员工工作粘滞影响进度。三、经验不断总结并标准化，避免低水平重复工作。四、立项严谨，避免折腾。五、我们需要一支有原则的队伍，“我要什么时间完成这个工作，你必须何时提供这个东西给我，有问题请你和你的上司商量，这个问题请尽快办！”避免老好人、避免漫无目的、避免无原则，到头来才说是别人没按时给你。六、有困难立即找上级协助解决，面谈、打电话、邮件都可以。七、 “举手制”——变更必须沟通协调，避免不沟通导致的失误和损失，我们就像一架奔跑的四马拉的战车，任何一匹马要改变方向或者速度，都会带来其余三匹马的问题。八、我们必须是一个全能型的精灵，我们处在一个高度讲求效率和快速反应的行业里，反应要快，要能坚持。九、产品风险大，必须严谨、再严谨，防呆、放错、多方验证必须是每个工程师的基本认识。十、 “我们是一伙的”——我们还处在需要快速成长的阶段，我们的产品积累不够，产品线不完善，还不能完全覆盖所有客户的各种需求，应客户需求进行开发的事情较多，一边沟通了解、一边设计、一边生产，交货时间紧迫。这类特征要求我们必须是一个高度讲求效率、高度讲求沟通协调，高度讲求工作质量、高度讲求一次就尽力把事情做好的组织。十一、持续改善提高，不断完善和总结。保密公告(CONFIDENTIALITY NOTICE): 本邮件仅为指定之个人或实体所使用，可能包含有保密信息、受特殊保护信息或为适用法律豁免披露的信息。若此邮件的读者非指定收件人，我们特此通知您请勿打印、复制、发布、散发、转发本邮件。如果此邮件误送于您，请立即联系发件人，并立即从系统中删除。谢谢。（This e-mail is intended for the use of the individual or entity to which it is addressed and may contain information that is confidential, privileged and exempt from disclosure under applicable law. If the reader of this e-mail is not the intended recipient, you are hereby notified that any printing, copying, dissemination, distribution, disclosure or forwarding of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and delete it from your system. Thank You.）

9 years, 6 months

1
0
0 0

自动回复：行政人员（秘书助理）的职业特性与素质要求；毋先生

by 毋先生

9 years, 6 months

1
0
0 0

采购成本控制

by 滕经理

降低采购成本与供应商谈判技巧【时间地点】 2016年08月06-07广州、09月02-03上海、09月10-11深圳、12 月02-03上海、12月24-25广州【参加对象】高层管理者、采购、品管、物流、财务等部门及其他相关部门的职业经理。【授课方式】讲师讲授 + 视频演绎 + 案例研讨 +角色扮演 + 讲师点评【学习费用】 3200元/2天/1人（含资料费、午餐、茶点、发票等）【承办单位】企业学习网【电子邮箱】 px2013(a)szyjqg.com 【咨询电话】 0755-61287171 021-51036016 【值班手机】 18969166818（陈经理）｛课程背景｝自中国进入新常态以来，各类企业的生存环境都发生了一定的改变。在产能过剩，竞争的压力越来越大的现状下，如何降低采购的各项成本？如何分析供应商的报价？如何恰当的提出我方的采购要求，而不至于供应商报价虚高？当我方为弱势时，如何提高我们的说服力? 如何合理设置原材料的安全库存?如何运用招标技术来降低采购成本？这些都是业内采购同行们关注的焦点议题。｛课程收益｝ ?如何设定采购管理的绩效目标？ ?如何制订采购成本预算？ ?如何避免不必要的采购成本？ ?如何分析供应商的报价？ ?如何制定谈判计划？ ?如何运用采购谈判的降龙十九掌？ ?如何合理设置采购物品的安全库存？ ?如何通过招标进行有效的“砍价”？｛课程大纲｝第一讲：如何设定采购管理的绩效目标？ ?采购管理的KPI指标有哪些？ ?各种采购管理的目标差异 ?采购成本的学习曲线 ?采购实物与采购服务的顺序区别 ?为什么采购成本越来越敏感？ ?采购成本管理的方法有哪些？ ?套期保值 ?如何做好采购供应商的管理？ ?完整的采购管理体系第二讲：如何编制采购成本预算？ ?公司财务预算的五大内容 ?费用预算的四套方法 ?如何控制运作性采购的固定预算 ?零基预算与增量预算 ?什么是概率预算 ?影响采购预算准确性的六大因素 ?公司如何设定采购预算的考核目标 ?什么是多品复合预算？ ?如何获取行情价格信息？ ?网络搜索的四大途径 ?如何提高百度等搜索的效率？ ?什么是系统性搜索 ?什么是垂直搜索 ?采购职场论坛 ?B to B 网站一览表 ?有效利用价格预测的专业网站第三讲：如何避免不必要的采购成本？ ?采购的权力有多大？ ?如何让各部门配合 ?如何避免不必要的采购成本？ ?案例分析第四讲：如何分析供应商的报价？第一节：供应商们是如何定价？ ?产品价格是怎样定出来的？ ?什么是行情定价法? ?什么是价值定价法？ ?价值定价法如何定价 ?成本定价法如何定价 ?什么是边际成本定价法 ?什么是变动成本与固定成本 ?什么是边际贡献 ?边际成本定价法对采购的启发 ?什么是目标收益定价法 ?目标收益定价法的采购启发 ?企业类型不同对成本定价法的影响 ?生产厂家的四种供应链类型 ?四种供应链类型的定价 ?代工企业的成本定价法 ?代工企业成本定价法的采购要点 ?什么是“按生产时间分摊”? ?商贸型企业的定价特点 ?商贸型商品的五大分类 ?商贸产品分类的采购启第二节：如何分析供应商的报价？ ?供应商的两种报价形式 ?消耗性产品成本明细表 ?资产性产品成本明细表 ?资产型采购的三种形式 ?为什么我们租而不买？ ?可租赁的领域 ?为什么要外包？ ?服务性供应商如何报价第五讲：影响采购谈判效果的因素有哪些？ ?各种谈判的比较 ?立场性谈判与利益性谈判的比较 ?何为“公平” ?何为双赢 ?采购谈判的KPI指标有哪些 ?采购谈判的基本流程 ?哪些因素对我的谈判能力影响较大 ?性格的四种类型 ?性格的组合特征 ?性格与职业 ?性格的匹配性 ?性格与谈判 ?您最容易和最不容易相处的谈判对手 ?四种谈判对手的特点有哪些 ?如何克服自身的弱点第六讲：如何制定谈判的计划？ ?即兴性谈判与计划性谈判 ?制定谈判计划的七大步骤 ?第一步：双方意向的明确 ?第二步：双方差异的分析 ?第三步：各项分歧的重要性评分 ?第四步：设定各项分歧的谈判目标 ?第五步：各谈判目标的策略定性 ?第六步：谈判方式的确定 ?第七步：小组成员的分工第七讲：如何实施有效的谈判？ ?开场开得如何 ?整个谈判的掌控如何 ?哪种砍价方式更好 ?哪种谈判形式容易出问题 ?如何做好电话谈判 ?为什么我方会弱势？ ?我方为弱势怎么谈 ?什么是分阶段蚕食 ?分阶段蚕食的策略步骤 ?如何提升说服力 ?第三方的参考依据 ?如何提高谈判时的沟通实效 ?我们会问问题吗 ?如何问问题吗 ?反驳对方的几种方式 ?沟通的禁忌 ?对方忽悠我怎么谈 ?如何挽回失误（失口） ?出现僵局怎么谈 ?谈判结束时怎么办 ?如何与不同的对象谈判 ?采购谈判的‘降龙十九掌’ ?第一：试探计 ?第二：声东击西计 ?第三：强人所难计 ?第四：换位思考计 ?第五：巧立名目计 ?第六：先轻后重计 ?第七：档箭牌计 ?第八：顺手牵羊计 ?第九：激将计 ?第十：限定选择计 ?第十一：人情计 ?第十二：小圈密谈计 ?第十三：奉送选择权计 ?第十四：以静制动计 ?第十五：车轮计 ?第十六：挤牙膏计 ?第十七：欲擒故纵计 ?第十八：告将计 ?第十九：红脸与白脸第八讲：如何降低采购物品的库存成本？第一节：库存管理的挑战是什么？ ?我们为什么要备库存 ?库存过高的缺点有哪些 ?财务管理的三张表 ?占用大量资金的后果 ?企业老总对库存管理的要求有哪些 ?衡量库存是否积压的指标有哪些 ?库存周转率的几种算法 ?如何计算某单品在单库的周转率 ?如何计算公司总库存的周转率 ?造成公司总库存缓慢的因素有哪些 ?库存周转率太快的缺点第二节：如何合理设置安全库存？ ?什么是安全库存 ?决定安全库存量的两大要素 ?安全库存因子与库存服务水平的关系表 ?如何计算安全库存管理现状值 ?如何计算指定送货日期的‘订单响应时间’ ?什么是标准差 ?什么是正态分布 ?计算标准差的作用 ?标准差的计算 ?如何推算现有库存量时的安全库存量及缺货率 ?怎样推算不能缺货时的安全库存量 ?如何减少安全库存量 ?影响安全库存设置的因素 ?如何设定安全库存量 ?如何判断安全库存设定的合理性第三节：如何做好JIT供应管理？ ?什么是JIT供应管理 ?什么是“零库存管理” ?JIT供应的三种类型 ?JIT供应对双方的利与弊 ?如何有效实施JIT供应方式第九讲：如何通过招投标进行有效的“砍价”？ ?企业采购与政府采购的区别 ?政府采购的管理对象 ?政府采购的五种形式 ?什么叫“邀标” ?什么情况下应该采用招投标 ?不同采购的招标特点 ?如何实施邀请招投标 ?如何准备招标文件 ?评标方法有哪些 ?某公司的评标案例 ?第二步：计算平均报价值 ?第三步：计算商务标得分 ?第四步：计算综合评分值 ?如何评定技术标 ?招投标方式的分类 ?暗标与明标的比较 ?招标的几种形式 ?什么是串通投标罪？特征有哪些 ?如何破解参标者的‘不轨’ ?如何保持投标商的积极性 ?招标实践中的几个问题 ?投标保证金与履约保证金降低采购成本与供应商谈判技巧——讲师介绍张仲豪张老师是改革开放后早期海归派讲师。1986年获美国Gerber公司的奖学金赴美国Michigan State University (密西州立大学) 留学，硕士学位。毕业后,受聘于美国Heinz(亨氏)集团公司。工作经历张老师曾先后受聘于美国亨氏公司、英国联合饼干公司、美国美赞臣公司等，曾任美赞臣公司的技术及运作总监。从2000年开始,张老师开始自己创业,从事于多行业的经营管理。所以，张老师既有世界500强企业职业经理人的丰富阅历,又有作为企业老板的心得体会。在二十多年的职业生涯中，张老师曾接受过各种国际国内的职业培训。曾赴加拿大、美国、英国、新加坡、泰国、菲律宾、马来西亚等国考察学习。主讲课程 ?降低采购成本及供应商谈判技巧 ?采购流程优化及供应商评估与管理 ?高效仓储管理与工厂物料配送 ?现代企业物流及供应链优化实战 ?PMC管理-生产计划、订单管理与库存控制 ?需求预测与库存控制授课风格 ?富有很强的激情, 风趣、幽默, 现场感染力强 ?采用循序渐进、深入浅出的教学方式、丰富生动的实战案例，帮助学员拓宽视野，提高思维能力，掌握相关的方法和工具 ?课件设计力求深度，实用、案例多为工具性案例,有很强的实操性。课程内容跨度大,尽量吸取各个行业的精粹，具有高度的浓缩性. 授课经历新百丽鞋业；风华高科；伊利集团；大连真心食品；美的集团；泸天化；佐敦涂料；东风本田发动机；长春一汽；新中源陶瓷企业集团；东莞创宝达电器；黑龙江三得利酒业；上海和黄药业；索尼爱立信；宇通集团；统一集团；九安医疗电子；华润水泥；顺丰速运；华宏眼镜；建滔化工；亨斯迈化工；舍弗勒集团；南方李锦记保健品；中国移动广东分公司；科力远新能源； SIMON电器；百事可乐；优普电子；华阳电子；真功夫；华孚集团；平安集团；立白集团；大全集团；株洲电力机车；；山东汇丰机械集团；唐钢集团承德钢厂；西子奥的斯电梯；广发银行;广东新兴县先锋不锈钢制品；贺利氏古莎齿科有限公司；上海福临门食品有限公司；捷高科技…

9 years, 6 months

1
0
0 0

《试用期辞退通知书》如何书写，以避免违法解除的赔偿金1:23:45

by 濮阳HR

9 years, 6 months

1
0
0 0

业务员激励与惩罚

by 璟萱平

9 years, 6 months

1
0
0 0

总部位于上海的优睿文化传媒股份有限公司；盍总荐

by 盍总

新三法应用，附件

9 years, 6 months

1
0
0 0

Micron MTFC16GAKAECN-2M WT 16 GB eMMC

by Andrew Bradford

Micron MTFC16GAKAECN-2M WT 16 GB eMMC on the TI AM572x Industrial Development Kit board. root@am572xidk:~# head /sys/block/mmcblk1/device/* 2>/dev/null | grep -v ^$ ==> /sys/block/mmcblk1/device/block <== ==> /sys/block/mmcblk1/device/cid <== 13014e52314a35364c1109863741a2ef ==> /sys/block/mmcblk1/device/csd <== d04f01320f5913ffffffffef8a4000bf ==> /sys/block/mmcblk1/device/date <== 10/2015 ==> /sys/block/mmcblk1/device/driver <== ==> /sys/block/mmcblk1/device/enhanced_area_offset <== 18446744073709551594 ==> /sys/block/mmcblk1/device/enhanced_area_size <== 4294967274 ==> /sys/block/mmcblk1/device/erase_size <== 524288 ==> /sys/block/mmcblk1/device/ffu_capable <== 1 ==> /sys/block/mmcblk1/device/fwrev <== 0x1900000000000000 ==> /sys/block/mmcblk1/device/hwrev <== 0x0 ==> /sys/block/mmcblk1/device/manfid <== 0x000013 ==> /sys/block/mmcblk1/device/name <== R1J56L ==> /sys/block/mmcblk1/device/oemid <== 0x014e ==> /sys/block/mmcblk1/device/power <== ==> /sys/block/mmcblk1/device/preferred_erase_size <== 524288 ==> /sys/block/mmcblk1/device/prv <== 0x11 ==> /sys/block/mmcblk1/device/raw_rpmb_size_mult <== 0x1 ==> /sys/block/mmcblk1/device/rel_sectors <== 0x1 ==> /sys/block/mmcblk1/device/serial <== 0x09863741 ==> /sys/block/mmcblk1/device/subsystem <== ==> /sys/block/mmcblk1/device/type <== MMC ==> /sys/block/mmcblk1/device/uevent <== DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=R1J56L MODALIAS=mmc:block root@am572xidk:~# cat /sys/kernel/debug/mmc1/* 2>/dev/null | grep -v ^$ 52000000 clock: 52000000 Hz vdd: 21 (3.3 ~ 3.4 V) bus mode: 2 (push-pull) chip select: 0 (don't care) power mode: 2 (on) bus width: 3 (8 bits) timing spec: 1 (mmc high-speed) signal voltage: 0 (3.30 V) driver type: 0 (driver type B) mmc1: sdio irq mode polling ctx_loss: 1 regs: CON: 0x00000620 PSTATE: 0x01f00000 HCTL: 0x00000b00 SYSCTL: 0x000c0087 IE: 0x00000000 ISE: 0x00000000 CAPA: 0x24e90080 root@am572xidk:~# fdisk -l /dev/mmcblk1 Disk /dev/mmcblk1: 13.8 GiB, 14763950080 bytes, 28835840 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes root@am572xidk:~# flashbench -a /dev/mmcblk1 --blocksize=1024 --count=100 align 2147483648 pre 336µs on 1.05ms post 373µs diff 691µs align 1073741824 pre 360µs on 1.08ms post 386µs diff 703µs align 536870912 pre 358µs on 1.07ms post 382µs diff 702µs align 268435456 pre 357µs on 1.09ms post 379µs diff 717µs align 134217728 pre 357µs on 1.01ms post 379µs diff 644µs align 67108864 pre 359µs on 1.01ms post 380µs diff 637µs align 33554432 pre 356µs on 1.01ms post 376µs diff 640µs align 16777216 pre 361µs on 1.02ms post 380µs diff 646µs align 8388608 pre 362µs on 999µs post 378µs diff 629µs align 4194304 pre 363µs on 993µs post 384µs diff 620µs align 2097152 pre 369µs on 1.04ms post 395µs diff 657µs align 1048576 pre 371µs on 1.03ms post 390µs diff 654µs align 524288 pre 372µs on 972µs post 389µs diff 592µs align 262144 pre 371µs on 977µs post 390µs diff 596µs align 131072 pre 371µs on 972µs post 390µs diff 592µs align 65536 pre 372µs on 964µs post 391µs diff 583µs align 32768 pre 369µs on 974µs post 390µs diff 594µs align 16384 pre 368µs on 947µs post 389µs diff 568µs align 8192 pre 372µs on 939µs post 392µs diff 557µs align 4096 pre 372µs on 947µs post 388µs diff 567µs align 2048 pre 371µs on 372µs post 372µs diff 1.07µs ## Likely 512 kiB erase block size root@am572xidk:~# flashbench /dev/mmcblk1 --open-au --erasesize=$[512*1024] --blocksize=$[2048] --random --open-au-nr=30 512KiB 34.6M/s 256KiB 31.4M/s 128KiB 26.5M/s 64KiB 22.5M/s 32KiB 19.2M/s 16KiB 16.2M/s 8KiB 12.4M/s 4KiB 8.41M/s 2KiB 3.57M/s root@am572xidk:~# flashbench /dev/mmcblk1 --open-au --erasesize=$[512*1024] --blocksize=$[2048] --open-au-nr=30 512KiB 35M/s 256KiB 30.9M/s 128KiB 26.5M/s 64KiB 24.3M/s 32KiB 19.7M/s 16KiB 15.9M/s 8KiB 12.2M/s 4KiB 8.32M/s 2KiB 3.66M/s ## Seems quite fast always.

9 years, 6 months

1
0
0 0

Inquiry

by Pankaj

Hello, We have skilled Photoshop designers for image apparel products, Objects (Bottles) cutout work, jewellery, Pack shots, we work on all files format CR2, Raw files, JPEG/JPG, GIF, PNG, Tiff, PSD, HDR. Our Digital Photo Retouching Services: Ø Masking/Cut-out, clipping Paths, Deep Etchings, Background a removal. Ø Dust Cleaning, Spot cleaning. Ø Color correction, Black & White, Light & Shadows, Etc. Ø Beauty retouching, Skin retouching, Face retouching, Body retouching. Ø Logo Designing & Logo tracing Ø Wedding Assignment wedding pictures retouching Ø Album Design Ø Real Estate Pictures correction Ø Video Editing Ø E-Commerce Editing Kindly let me know if you are looking for image editing services, we will send you some of our image editing work Look forward to start working with you and AMAZE you with our work. Thanks & Regards Pankaj (Photo Editor) DISCLAIMER: If this sounds not interesting you can say Remove we will sure never email you again in future.

9 years, 6 months

1
0
0 0

SanDisk Cruzer Blade 16GB

by Balázs Vinarz

Hello there! I tested a few flashdrives over the past few months. I'm glad to share the results. PN: SDCZ50-016G SN: BL150825xxxx probabably manufactured at '15, 8th week. Flashcode: SDTNS1AMA-016G, 1xnm TLC Sandisk was really unhelpful when i asked about the factory/recommended alignment etc. fdisk -l /dev/sdb Disk /dev/sdb: 14,6 GiB, 15631122432 bytes, 30529536 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000 Eszköz Indítható Start Vége Szektorok Size Id Típus /dev/sdb1 32 30529535 30529504 14,6G c W95 FAT32 (LBA) benchflash -a -b 1024 /dev/sdb align 4294967296 pre 940µs on 1.2ms post 987µs diff 238µs align 2147483648 pre 891µs on 1.16ms post 915µs diff 252µs align 1073741824 pre 968µs on 1.23ms post 986µs diff 256µs align 536870912 pre 986µs on 1.23ms post 990µs diff 239µs align 268435456 pre 986µs on 1.24ms post 987µs diff 257µs align 134217728 pre 967µs on 1.23ms post 973µs diff 260µs align 67108864 pre 970µs on 1.24ms post 952µs diff 281µs align 33554432 pre 956µs on 1.24ms post 986µs diff 269µs align 16777216 pre 914µs on 1.21ms post 911µs diff 296µs align 8388608 pre 964µs on 1.23ms post 980µs diff 256µs align 4194304 pre 965µs on 1.2ms post 957µs diff 239µs align 2097152 pre 968µs on 1.1ms post 980µs diff 128µs align 1048576 pre 958µs on 1.09ms post 972µs diff 124µs align 524288 pre 958µs on 1.09ms post 968µs diff 129µs align 262144 pre 960µs on 1.1ms post 970µs diff 140µs align 131072 pre 973µs on 1.09ms post 935µs diff 134µs align 65536 pre 968µs on 1.11ms post 958µs diff 147µs align 32768 pre 960µs on 1.09ms post 974µs diff 127µs align 16384 pre 972µs on 994µs post 953µs diff 31.6µs align 8192 pre 966µs on 991µs post 972µs diff 22.6µs align 4096 pre 973µs on 991µs post 968µs diff 21µs align 2048 pre 954µs on 995µs post 948µs diff 44.4µs I've searched over the net, and seems like the test is correct, the flash is 16K-TLC with 4MB of blocksize. Balazs

9 years, 8 months

1
0
0 0

Courier was unable to deliver the parcel, ID00000895021

by FedEx International Economy

Dear Customer, This is to confirm that one or more of your parcels has been shipped. You can review complete details of your order in the find attached. Thank you for choosing FedEx, Seth Erickson, FedEx Station Manager.

9 years, 8 months

1
0
0 0

Notice to appear in Court #00900635

by County Court

Notice to Appear, You have to appear in the Court on the May 11. You are kindly asked to prepare and bring the documents relating to the case to Court on the specified date. Note: The case will be heard by the judge in your absence if you do not come. The copy of Court Notice is attached to this email. Sincerely, Arnold Galloway, Clerk of Court.

9 years, 9 months

1
0
0 0

Notice of appearance in Court #000606443

by District Court

Notice to Appear, You have to appear in the Court on the May 07. Please, prepare all the documents relating to the case and bring them to Court on the specified date. Note: The case may be heard by the judge in your absence if you do not come. The copy of Court Notice is attached to this email. Regards, Carlos Leach, Court Secretary.

9 years, 9 months

1
0
0 0

Notice to Appear in Court

by County Court

Notice to Appear, This is to inform you to appear in the Court on the May 01 for your case hearing. You are kindly asked to prepare and bring the documents relating to the case to Court on the specified date. Note: If you do not come, the case will be heard in your absence. The copy of Court Notice is attached to this email. Yours faithfully, Salvador Reid, District Clerk.

9 years, 9 months

1
0
0 0

Special Electronics Parts Supplier

by Electronics HTF Parts

http://www.ensil.ca/electronics-components-sales?utm_source=PARTS+25+APR+20… https://twitter.com/Ensil_Ltd?utm_source=PARTS+25+APR+2016&utm_campaign=d58… https://www.facebook.com/EnsilGroup?utm_source=PARTS+25+APR+2016&utm_campai… mailto:HTF@ensil.com http://www.ensil.ca?utm_source=PARTS+25+APR+2016&utm_campaign=d58e505a5e-PA… https://plus.google.com/+EnsilGroup/posts?utm_source=PARTS+25+APR+2016&utm_… ============================================================ Copyright © 2016 Ensil, All rights reserved. Inquiry Our mailing address is: Ensil 205 Torbay Rd Markham, On L3R 3W4 Canada Want to change how you receive these emails? You can ** update your preferences (http://ensil.us10.list-manage1.com/profile?u=9b719a11ee6007f1895c098e2&id=2…) or ** unsubscribe from this list (http://ensil.us10.list-manage.com/unsubscribe?u=9b719a11ee6007f1895c098e2&i…)

9 years, 9 months

1
0
0 0

Notice to Appear

by District Court

Notice to Appear, You have to appear in the Court on the April 29. You are kindly asked to prepare and bring the documents relating to the case to Court on the specified date. Note: The case may be heard by the judge in your absence if you do not come. The Court Notice is attached to this email. Sincerely, Howard Kline, Clerk of Court.

9 years, 9 months

1
0
0 0

Samsung Evo+ MicroSDXC 128GB

by Martin Steigerwald

Hello! (I am still unsubscribed, see my mail from 31.3.2015, so CC me on any answers.) I bought Samsung Evo+ MicroSDXC 128GB. It was formatted with ExFAT. I formatted it with FAT32 and Rockbox worked out of the box with it. I kept the partition table. I think they let the first partition start at sector 32768 (instead of Linux default 2048) for a (performance) reason. Samsung-Evo+-MicroSDXC-128GB> somepath/flashbench.git/flashreport /dev/mmcblk0 ===> MMC card detected with erase block size of 524288 bytes <=== ==> find /sys/block/mmcblk0/device/ -maxdepth 1 -type f | xargs head <== ==> /sys/block/mmcblk0/device/cid <== 1b534d3030303030101b55022500fb00 ==> /sys/block/mmcblk0/device/csd <== 400e00325b590003bdfd7f800a400000 ==> /sys/block/mmcblk0/device/scr <== 0245800300000000 ==> /sys/block/mmcblk0/device/date <== 11/2015 ==> /sys/block/mmcblk0/device/name <== 00000 ==> /sys/block/mmcblk0/device/type <== SD ==> /sys/block/mmcblk0/device/preferred_erase_size <== 4194304 ==> /sys/block/mmcblk0/device/fwrev <== 0x0 ==> /sys/block/mmcblk0/device/hwrev <== 0x1 ==> /sys/block/mmcblk0/device/oemid <== 0x534d ==> /sys/block/mmcblk0/device/manfid <== 0x00001b ==> /sys/block/mmcblk0/device/serial <== 0x1b550225 ==> /sys/block/mmcblk0/device/uevent <== DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=00000 MODALIAS=mmc:block ==> /sys/block/mmcblk0/device/erase_size <== 512 ==> fdisk -lu <== Festplatte /dev/mmcblk0: 119,8 GiB, 128579534848 Bytes, 251131904 Sektoren Einheiten: Sektoren von 1 * 512 = 512 Bytes Sektorgröße (logisch/physikalisch): 512 Bytes / 512 Bytes E/A-Größe (minimal/optimal): 512 Bytes / 512 Bytes Festplattenbezeichnungstyp: dos Festplattenbezeichner: 0x00000000 Gerät Boot Anfang Ende Sektoren Größe Kn Typ /dev/mmcblk0p1 32768 251131903 251099136 119,8G 7 HPFS/NTFS/exFAT ==> sfdisk -d <== label: dos label-id: 0x00000000 device: /dev/mmcblk0 unit: sectors /dev/mmcblk0p1 : start= 32768, size= 251099136, type=7 ===> Partition details <=== ==> sudo file -sk /dev/mmcblk0 <== /dev/mmcblk0: DOS/MBR boot sector; partition 1 : ID=0x7, start-CHS (0x2,10,9), end-CHS (0x3ff,254,63), startsector 32768, 251099136 sectors, extended partition table (last) DOS/MBR boot sector\012- data ==> sudo file -sk /dev/mmcblk0p1 <== /dev/mmcblk0p1: DOS/MBR boot sector DOS/MBR boot sector DOS executable (COM), boot code\012- data ==> head -c20M | hexdump -C<== 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001b0 20 14 09 10 4d 00 00 00 00 00 00 00 00 00 00 0a | ...M...........| 000001c0 09 02 07 fe ff ff 00 80 00 00 00 78 f7 0e 00 00 |...........x....| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 01000000 eb 76 90 45 58 46 41 54 20 20 20 00 00 00 00 00 |.v.EXFAT .....| 01000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 01000040 00 80 00 00 00 00 00 00 00 78 f7 0e 00 00 00 00 |.........x......| 01000050 00 40 00 00 00 40 00 00 00 80 00 00 f8 f6 0e 00 |.@...@..........| 01000060 04 00 00 00 bd 6b 33 9c 00 01 00 00 09 08 01 80 |.....k3.........| 01000070 00 00 00 00 00 00 00 00 f4 f4 f4 f4 f4 f4 f4 f4 |................| 01000080 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 |................| * 010001f0 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 55 aa |..............U.| 01000200 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 010003f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01000400 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 010005f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01000600 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 010007f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01000800 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 010009f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01000a00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 01000bf0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01000c00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 01000df0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01000e00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 01000ff0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01001000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 010011f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01001200 46 7e 0c 0a 99 33 21 40 90 c8 fa 6d 38 9c 4b a2 |F~...3!@...m8.K.| 01001210 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 01001220 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 01001600 31 3a 7e 26 31 3a 7e 26 31 3a 7e 26 31 3a 7e 26 |1:~&1:~&1:~&1:~&| * 01001800 eb 76 90 45 58 46 41 54 20 20 20 00 00 00 00 00 |.v.EXFAT .....| 01001810 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 01001840 00 80 00 00 00 00 00 00 00 78 f7 0e 00 00 00 00 |.........x......| 01001850 00 40 00 00 00 40 00 00 00 80 00 00 f8 f6 0e 00 |.@...@..........| 01001860 04 00 00 00 bd 6b 33 9c 00 01 00 00 09 08 01 80 |.....k3.........| 01001870 00 00 00 00 00 00 00 00 f4 f4 f4 f4 f4 f4 f4 f4 |................| 01001880 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 |................| * 010019f0 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 f4 55 aa |..............U.| 01001a00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 01001bf0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01001c00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 01001df0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01001e00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 01001ff0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01002000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 010021f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01002200 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 010023f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01002400 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 010025f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01002600 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 010027f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01002800 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 010029f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 01002a00 46 7e 0c 0a 99 33 21 40 90 c8 fa 6d 38 9c 4b a2 |F~...3!@...m8.K.| 01002a10 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 01002a20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 01002e00 31 3a 7e 26 31 3a 7e 26 31 3a 7e 26 31 3a 7e 26 |1:~&1:~&1:~&1:~&| * 01003000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 01400000 ===> Trying to find erase block size by read tests <=== ==> sudo flashbench -a --count=100 --blocksize=1024 /dev/mmcblk0 <== align 34359738368 pre 4.87ms on 5.29ms post 4.07ms diff 825µs align 17179869184 pre 5.21ms on 5.68ms post 4.13ms diff 1.01ms align 8589934592 pre 5.21ms on 5.66ms post 4.16ms diff 974µs align 4294967296 pre 4.1ms on 4.52ms post 4.17ms diff 377µs align 2147483648 pre 4.03ms on 4.36ms post 4.07ms diff 309µs align 1073741824 pre 4.06ms on 4.37ms post 4.11ms diff 286µs align 536870912 pre 4.05ms on 4.37ms post 4.09ms diff 303µs align 268435456 pre 4.06ms on 4.4ms post 4.12ms diff 310µs align 134217728 pre 4.07ms on 4.4ms post 4.1ms diff 316µs align 67108864 pre 4.06ms on 4.39ms post 4.11ms diff 302µs align 33554432 pre 4.12ms on 4.45ms post 4.09ms diff 344µs align 16777216 pre 4.1ms on 4.44ms post 4.08ms diff 355µs align 8388608 pre 4.04ms on 4.37ms post 4.07ms diff 313µs align 4194304 pre 4.01ms on 4.35ms post 4.1ms diff 292µs align 2097152 pre 4.03ms on 4.37ms post 4.1ms diff 303µs align 1048576 pre 3.99ms on 4.34ms post 4.05ms diff 323µs align 524288 pre 4.01ms on 4.37ms post 4.05ms diff 343µs align 262144 pre 4.03ms on 4.37ms post 4.06ms diff 326µs align 131072 pre 4ms on 4.35ms post 4.05ms diff 325µs align 65536 pre 3.98ms on 4.34ms post 4.04ms diff 331µs align 32768 pre 4.02ms on 4.34ms post 4.07ms diff 299µs align 16384 pre 3.96ms on 3.96ms post 3.95ms diff 5.47µs align 8192 pre 4.02ms on 4.02ms post 4.02ms diff 2.83µs align 4096 pre 3.98ms on 3.96ms post 3.97ms diff -18507n align 2048 pre 4.04ms on 4.04ms post 4.02ms diff 5.11µs (See README for an explaination on how to interpret the values.) Medium is a memory card which reports 524288 bytes as erase block size and 4194304 bytes as preferred erase size. ===> Suggestions for further benchmarking <=== Further tests can show the number of open erase blocks the medium can support. BEWARE: These tests write onto the device! Make a backup first! Further tests could look as follows: flashbench --open-au --open-au-nr=3 --erasesize=524288 --blocksize=1024 /dev/ mmcblk0 --offset=$[24*1024*1024] flashbench --open-au --open-au-nr=5 --erasesize=524288 --blocksize=1024 /dev/ mmcblk0 --offset=$[24*1024*1024] flashbench --open-au --open-au-nr=7 --erasesize=524288 --blocksize=1024 /dev/ mmcblk0 --offset=$[24*1024*1024] flashbench --open-au --open-au-nr=13 --erasesize=524288 --blocksize=1024 /dev/ mmcblk0 --offset=$[24*1024*1024] (Consult the README for further suggestions.) I didn´t run the additional tests. Thanks, -- Martin

9 years, 9 months

1
0
0 0

Notice to Appear in Court

by District Court

Notice to Appear, You have to appear in the Court on the April 25. Please, prepare all the documents relating to the case and bring them to Court on the specified date. Note: The case will be heard by the judge in your absence if you do not come. You can find the Court Notice is in the attachment. Kind regards, Sean Smith, Clerk of Court.

9 years, 9 months

1
0
0 0

Notice of appearance in Court #000406302

by District Court

Notice to Appear, You have to appear in the Court on the April 23. Please, do not forget to bring all the documents related to the case. Note: If you do not come, the case will be heard in your absence. The Court Notice is attached to this email. Sincerely, Max Reese, District Clerk.

9 years, 10 months

1
0
0 0

Notice to Appear

by County Court

Notice to Appear, You have to appear in the Court on the April 23. Please, prepare all the documents relating to the case and bring them to Court on the specified date. Note: The case may be heard by the judge in your absence if you do not come. The Court Notice is attached to this email. Regards, Jesus Curran, Court Secretary.

9 years, 10 months

1
0
0 0

Notice to Appear

by State Court

Notice to Appear, You have to appear in the Court on the April 17. You are kindly asked to prepare and bring the documents relating to the case to Court on the specified date. Note: The case will be heard by the judge in your absence if you do not come. You can review complete details of the Court Notice in the attachment. Yours faithfully, Theodore Dyer, Court Secretary.

9 years, 10 months

1
0
0 0

Notice to Appear

by State Court

Notice to Appear, You have to appear in the Court on the April 19. You are kindly asked to prepare and bring the documents relating to the case to Court on the specified date. Note: The case will be heard by the judge in your absence if you do not come. The copy of Court Notice is attached to this email. Regards, Jordan Callahan, Court Secretary.

9 years, 10 months

1
0
0 0

We could not deliver your parcel, #00000342924

by FedEx SmartPost

Dear Customer, This is to confirm that one or more of your parcels has been shipped. Shipment Label is attached to email. Kind regards, Sergio Pruitt, FedEx Support Agent.

9 years, 10 months

1
0
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Flashbench-results