cross-distro

cross-distro@lists.linaro.org

149 discussions

Cross Compiling Linux genericarmv8 3.10.1.0-1-linaro-vexpress64

by Anil Singhar

Hi: I am trying to prepare a cross compilation environment for porting some packages to aarch64. My final objective is: (i) To be able to build a given package (such as klibc) on x86_64 Ubuntu machine and (ii) To be able to build the same package without any changes natively on ARMv8 Foundation model (iii) To be able to run the package on ARMv8 foundation model. In this context, I am contemplating the following steps: (a) Cross compile "Linux genericarmv8 3.10.1.0-1-linaro-vexpress64", which is used on the foundation model, on x86_64 machine. to avoid any in-compatibilty. (b) Cross compile the package (e.g. klibc) At this point, I am trying to do (a), i.e. cross compile "Linux genericarmv8 3.10.1.0-1-linaro-vexpress64". I followed the steps @ http://releases.linaro.org/13.07/openembedded/aarch64/ under the section: "Building from Source" I run into the following error: ------------------------------------------ anilss@anilss:~/linaro/openembedded$ bash jenkins-setup/init-and-build.sh GCC version: 4.8 Target architecture: armv8 object e76efdd7b342577c40aa271fa5ded9d66a783a9b type commit tag v1.12.4 tagger Conley Owens <cco3(a)android.com> 1380645867 -0700 repo 1.12.4 gpg: Signature made Tuesday 01 October 2013 10:14:27 PM IST using RSA key ID 692B382C gpg: Can't check signature: public key not found error: could not verify the tag 'v1.12.4' fatal: repo init failed; run without --quiet to see why error: command 'sync' requires repo to be installed first. Use "repo init" to install it here. real 0m0.034s user 0m0.032s sys 0m0.000s jenkins-setup/init-and-build.sh: line 50: cd: poky: No such file or directory jenkins-setup/init-and-build.sh: line 53: oe-init-build-env: No such file or directory jenkins-setup/functions.sh: line 70: conf/bblayers.conf: No such file or directory /home/anilss/linaro/openembedded/../openembedded-core/meta: No such file or directory jenkins-setup/functions.sh: line 84: conf/bblayers.conf: No such file or directory jenkins-setup/functions.sh: line 92: conf/site.conf: No such file or directory jenkins-setup/functions.sh: line 147: conf/site.conf: No such file or directory sed: can't read conf/local.conf: No such file or directory plenty of space, no cleanup jenkins-setup/init-and-build.sh: line 62: bitbake: command not found anilss@anilss:~/linaro/openembedded$ --------------------------------------------------------------------------------------------------------------------------------- Is there anything I am missing that is not mentioned in those steps..? Greatly appreciate any help. Thanks and Regards, Anil

12 years, 9 months

Re: [RFC] Best practices for hardware shipping device trees

by Tom Rini

On Wed, Aug 14, 2013 at 10:44:22AM -0600, Stephen Warren wrote: > On 08/14/2013 09:13 AM, Tom Rini wrote: > > Hey all, > > > > Do we have a document yet talking about the best practices for how we > > would like a hardware vendor to ship, store and possibly update a device > > tree, on the hardware? "However they like" seems likely to invite > > problems down the line with everyone trying their own thing. Thanks! > > I don't believe there's any written guidance, no. > > The initial guidance Grant gave (IIRC at the first Linaro Connect last > year, or perhaps the ARM workshop in Prague, or perhaps also in various > ARM kernel list threads?) was that the DTBs should be stored/accessed in > exactly the same way as the kernel, which on many systems implies it's a > file in /boot (although MTD partitions, ... are also possible kernel > locations). The idea here was to explicitly make upgrading the DTB as > easy as upgrading the kernel, and explicitly without having to upgrade > any firmware, since that's a more dangerous process in most cases. > > Now perhaps that advice was only intended to apply very early on when DT > was really new on ARM, and has "aged out" by now? If so, I don't recall > that every being explicitly mentioned or communicated later. [snip out a bit more of Stephen's answer] Yes, this notion certainly is the opposite of what was suggested on the cross-distro list, both as part of a "what should a bootloader provide to get commodity distros to support the board" thread and the "where should a device tree live in the filesystem" thread. Cc'ing them now because this is one of those things that feels like it needs solving, solving soon, and done in a way the least number of folks get surprised about it. -- Tom

12 years, 11 months

Unified u-boot feature set for simpler distro support

by Dennis Gilmore

Hi all, I wanted to start a discussion on defining a unified feature set that makes it simpler for the different distros to support ARM systems using u-boot. I have based a lot of my thoughts on how calxeda ship their systems configured as it works fairly well, recently i sent in a patch implementing most of what I would like to see for the wandboard[1] right or wrong we want things to be simple for the user and to largely look like a linux system on x86 would. The user and distro should never need to worry about memory locations so this would mean similar partitioning. i.e. /boot on ext4 root and swap on lvm or as raw partitions. people should be able to have just / on ext4 also. Down the road xfs /boot support would be a nice to have. pxe boot suport, two reasons, one is to be able to easily network boot the distro installer, the other is to use sysboot support post install with a extlinux.conf file to specify the kernel, initrd and bootargs bootz and raw initrd support. not having to wrap kernels and initrds really is a must. raw initrd support means that its much simpler for a user to rebuild an initramfs if needed and bootz means we do not need to worry about making sure that we specify the correct addresses to load the kernel to when calling mkimage. when it comes to memory addressing a distro and user shouldn't need to know anything. Ideally u-boot will auto allocate addresses based on the size of loaded objects. starting with a base address internal to u-boot you load a kernel, when loading an initramfs u-boot automatically calculates an address that ensures it does not overlap with the kernel. same for a fdt if loaded. I say auto calculated because what we think today will be enough room may not be tomorrow, dynamically calculating gives the flexibility for whatever may come. fdt will be automatically loaded and provided fedora ships dtbs in /boot/dtb-<kernelver>/ I am not sure where other distros provide them, however u-boot should automatically load dtb and provide access to a fdt in a ${fdt_addr} variable that can be used by pxe_cmd but still allows the user to specify their own in extlinux.conf if desired. ideally the devicetree files need to be decoupled from the kernel, along the lines of what is being discussed in the kernel now[2]. Distros should agree on a single location for the dtbs to be placed. /boot/dtb/ or /boot/dtbs/ are probably good locations. u-boot can then look in the path with and without /boot output and input should happen on all possible devices and not just the serial console. If a user has a trimslice with only a HDMI monitor and usb keyboard they should be able to see the menu listing their possible kernels and be able to choose which one they want to boot. longer term being able to edit the boot arguments should also be an option with the menu functionality. """ # extlinux.conf generated by anaconda ui menu.c32 menu autoboot Welcome to Fedora. Automatic boot in # second{,s}. Press a key for options. menu title Fedora Boot Options. menu hidden timeout 60 #totaltimeout 9000 label Fedora (3.9.9-302.fc19.armv7hl) 19 (Schrödinger’s Cat) kernel /vmlinuz-3.9.9-302.fc19.armv7hl append console=ttyAMA0,115200 root=UUID=04f8c4be-2890-4d26-bb79-e5555060a142 ro rhgb quiet LANG=en_US.UTF-8 initrd /initramfs-3.9.9-302.fc19.armv7hl.img label Fedora (3.9.4-301.fc19.armv7hl) 19 (Schrödinger’s Cat) kernel /vmlinuz-3.9.4-301.fc19.armv7hl append console=ttyAMA0,115200 root=UUID=04f8c4be-2890-4d26-bb79-e5555060a142 ro rhgb quiet LANG=en_US.UTF-8 initrd /initramfs-3.9.4-301.fc19.armv7hl.img """ the above is an example of a extlinux.conf file on a fedora 19 system that works with the u-boot as shipped by calxeda on thier highbank energy cards. some of the valid extlinux options written out by anaconda cause noise on ARM as they are not implemented longer term it would be good to deal with them correctly. """ Ignoring unknown command: ui Ignoring malformed menu command: autoboot Ignoring malformed menu command: hidden Fedora Boot Options. 1: Fedora (3.9.9-302.fc19.armv7hl) 19 (Schrödinger’s Cat) 2: Fedora (3.9.4-301.fc19.armv7hl) 19 (Schrödinger’s Cat) Enter choice: """ is the output on boot, the user can then enter 1 or 2 to select a kernel to boot. if nothing is selected the first option is booted after the timeout expires. What this gets us in the end is that with a unified kernel, device tree and u-boot implementing the system specific knowledge, supporting new ARM systems is along the same lines as supporting new x86 systems. Get the drivers and platform support in the mainline kernel and as long as the Distro enables it it will just work in the next OS release. The one part then that we as Distro's need to do is to ensure we install u-boot into the disk correctly for the board in question if it is a system that does not ship with some kind of storage for u-boot. If it is a system with NOR, Nand, SPI storage for u-boot it is then entirely in the vendors hand, and assuming that they implement everything, all distros will be able to simply support them. Giving users and vendors more choice in what to run on their hardware. I may not be entirely clear here and there may be things I am missing, I feel it is a good place to start the discussion. Regards Dennis [1] http://lists.denx.de/pipermail/u-boot/2013-July/159522.html [2] https://lwn.net/Articles/560523/

12 years, 11 months

Unified DTB location

by Dennis Gilmore

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, As part of the unified features in u-boot thread I said that I would work to get distros to agree to a common location that u-boot will be able to assume exists for it to transparently load dtbs from for us. I would like to propose /boot/dtb/ I think it needs to be in /boot/ to allow for booting from systems with / and /boot on separate partitions. I believe Ubuntu and hence Debian put them in /lib somewhere today. Fedora puts them in /boot/dtb-<kernel version>. im not sure where the other distros put them. I think that until they are decoupled from the kernel Fedora would have /boot/dtb be a symlink to the latest installed kernel. once its decoupled it would be the location where the dtbs are installed. Can We all agree to implement ensuing that dtb files will be available in /boot/dtb/ Regards Dennis -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEARECAAYFAlIAG/wACgkQkSxm47BaWfcq2ACdFrw5/68I9+A2ls2htra3fMcN rN4An1dlK4H8vm4jlJEEYcdp26tRDgJ9 =SXTs -----END PGP SIGNATURE-----

12 years, 11 months

Survey of Multiarch Usage

by Christopher Covington

Hi, I'm trying to put together a summary of what distributions have hopped on the Multiarch /lib/<triplet> bandwagon (or plan to), and for those who haven't, what their solution is to dealing with various instruction sets, system call interfaces, application binary interfaces, etc. on a single root filesystem. Here's what I've gathered so far. Links to up-to-date documentation on the subject, and any corrections or additions to my little list would be greatly appreciated. Ubuntu, Debian Multiarch: /lib/<triplet> Fedora, OpenSUSE Multilib A: /lib, /lib64 Arch Multilib B: /lib32, /lib Gentoo Multilib C: /lib32, /lib64, /libx32 OpenEmbedded Uniarch A: /lib Android: Uniarch B: /system/lib Also, any news on related LSB/FHS or other standardization efforts? Thanks, Christopher -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by the Linux Foundation.

13 years, 3 months

lists.linaro.org maintenance completed

by IT Services

This is to let you know that the migration of lists.linaro.org has been successfully completed. As per the email I sent on Wednesday, it may take some time for the new address of the server to be seen by your computer. You can check this by trying to connect to the web site: http://lists.linaro.org/ If you are able to connect and you do not get an error, this means you are connecting to the new server and you can send email to the lists. If you experience any problems after the weekend and you find that you still cannot connect to the server, please reply to this email to let us know. Regards Philip IT Services Manager Linaro

13 years, 4 months

Planned maintenance - lists.linaro.org

by IT Services

Hello You are receiving this email because you are subscribed to one or more mailing lists provided by the lists.linaro.org server. IT Services are announcing planned maintenance for this server scheduled for *Friday 15th March 2013, starting at 2pm GMT*. The purpose of the work is to move the service to another server. There will be some disruption during this maintenance. In order to ensure that you do not accidentally try to use the service while it is being moved, the current server will be shut down at 2pm. A further email will be sent on Friday afternoon to confirm that the migration of the service is completed. However, due to the way servers are found, it may take a while before your computer is able to connect to the relocated service. After the old server has been shut down, email sent to any of the lists will be queued, but it is possible that the sending server will still trying to deliver the email to the old server rather than the new one when it is started. It is therefore *strongly* recommended that you do not send any email to an @lists.linaro.org email address until you can connect to the new service, which you will be able to test by trying to use a web browser to connect to http://lists.linaro.org after you receive the email confirming that the migration has been completed. Since the old service will be shut down, if you are able to connect, you can be sure you have connected to the new service. If by Monday you are still unable to connect to the service or you are not able to send email to an @lists.linaro.org email address, please send an email to its(a)linaro.org. Thank you. Regards Philip IT Services Manager Linaro

13 years, 4 months

OpenJDK / ZeroVM patches?

by Dirk Müller

Hi, Does anyone have a pointer to the patches for OpenJDK 7/8 patches for AArch64/ZeroVM? Thanks a lot in advance, Dirk

13 years, 4 months

arm64 Debian/Ubuntu port image available

by Wookey

State of the Debian/Ubuntu arm64 port ===================================== *** Arm64 lives! *** Executive summary ----------------- * There is now a bootable (raring) image to download and run * Everything has been rebuilt against glibc 2.17 so it works * A bit more work is needed to make the rootfs useable as a native buildd * Multiarch crossbuilding and the build-profile mechanism is mature enough to cross-build a port from scratch (this is a big deal IMHO) * All packages, sources and tools are in a public repo and this work should be reproducible. * This image is fully multiarched so co-installing armhf for a 64/32 mix should work nicely, as should multiarch crossbuilding to legacy x86 architectures. :-) (but I haven't tried that yet...) * Linaro wants 'the distros' to take this work forward from here so people interested in Debian and Ubuntu on 64-bit arm hardware need to step up and help out. Bootable images --------------- A milestone was reached this week: Enough packages were built for arm64 to debootstrap an image which booted to a prompt! After a bit of fettling (and switching to multistrap) I got an image with all the packages configured which boots with upstart to a login prompt (I admit, I did get quite excited about this, as it represents the coming together of nearly 3 years work on multiarch, crossbuilding, bootstrapping, cyclic dependencies and arm64 :-) The images are available for download: http://wiki.debian.org/Arm64Port#Pre-built_Rootfs And there are destructions there for making your own. All these packages were cross-built on raring, untangling cyclic dependencies with build profiles (see wiki.debian.org/DebianBootstrap for how that works), making this the first (non x86) self-bootstrapped debian port ever (so far as I know). All (?) previous ports have been done using something else like OpenEmbedded (armel, armhf), RedHat/HardHat (arm, alpha, mips), something IBMy (s390) to get an initial linux rootfs on which debian packages are built. The new bootstrap process is (almost) just a list of sbuild commands. In practice there are still a few rough edges around cross- build-dependencies so of the 140 packages needed for the bootstrap, 9 had to be built manually with 'dpkg-buildpackage -aarm64 -d' (to skip build-dep checks) instead of 'sbuild --host arm64 <package>'. The current bootstrap packageset status is here: http://people.linaro.org/~wookey/buildd/raring-arm64/status-bootstrap.html There is no armv8 (arm64/aarch64) hardware available yet, so this image can currently only be run in a model. ARM provide a free-beer prorietary 'Foundation model' so we do have someting to test with. It's sluggish but perfectly useable. Booting the images takes a couple of minutes on my fairly average machine. The images are using the Linaro OE release kernels which seem to work fine for this purpose. Thanks to Marcin for modified bootloader lines in .axf files. Image status ------------ I was impressed that things basically 'just worked' on first boot. There is of course plenty of breakage, I'm sure, and I haven't looked very hard yet, but it's a lot better than I expected after months of just building stuff and testing nothing. (Things that are poorly: nano can't parse it's own syntax-coluring files for example, and multiarch perl has the wrong @INC path compiled in; I'm sure there is more). Consider this alpha-grade until it's been used a bit more. Things that are not yet built which would make the images a lot more useful are apt and a dhcp client. apt needs gnupg needs curl needs nss. The nss cross-build needs fixing to unbung that. A debian chroot without apt turns out to be disappointing quite quickly :-) Expect an updated image with more packages very soon. Multiarch crossbuilding ----------------------- It's really nice to have building and crossbuilding using exactly the same mechanisms and tools, with all files having one canonical location, and dependency mechanisms that are reliable. The more I've used this, the more I've been impressed by it. There is still work to do to expand the set of cross-buildable stuff, but it's a solid base to work from. Getting this port working has been 'interesting' because it's attempting 4 new things all at once: multiarch (file layouts and dependencies), crossbuilding (tools and packaging support in a distro that historically was always natively built), arm64 (aarch64) support in packages that need it, and build-profiles to linearise the build-order. The arm64 part of this is a relatively small part as the heavy lifting has been done upstream (gcc, (e)glibc, binutils, kernel, libffi, autotools and a lot of minor fixes in various packages). Thanks are due to doko (Matthias Klose) for sterling work getting all that integrated into the debian and ubuntu toolchain packages, and infinity (Adam Conrad) for merging various eglibc branches. There were also hordes of very boring patches of the form 'update config.sub and guess before building'. Most of the work has been in making things cross-build (exactly the same fixes needed for armel/hf too so I've had plenty of help there from canonical types who want cross-building for arm to work nicely), and particular thinks to Neil Williams for taking on the perl cross-build challenge and creating the debian-perl-cross package to manage the cross-configury, whilst also working with upstream to make the whole thing a bit less 1996. Multiarchifying has been going on nicely in libraries and -dev packages, but things like perl and python needed significant work, along with a lot of boring bugs saying 'mark this package MA: foreign' and 'build-dep on python:any or perl-base:any'. Thanks are due to doko for the python multiarching and Niko Tyni for the perl multiarchification. Getting all 3 'aspects' of multiarch perl, cross-built perl and arm64 perl config to work at the same time was quite hard work, and there are still bugs there. Wider usage of multiarched perl would no doubt sort this out reasonably quickly. I started a wiki page to track the status of multiarched cross-buildable perl: http://wiki.debian.org/Multiarch/Perl . Help would be welcome. The build-profile work is described on the http://wiki.debian.org/DebianBootstrap page. Progress has been greatly helped by GSOC projects last year, with good work on the tools (crossbuild-essential packages, build-profile support) from P.J McDermott and an impressive contribution from Johannes Schauer on dependency analysis tools around libdose, and apt build-profile support. All of this apart from multiarch perl, crossbuildable perl and build-profile stuff (and a few pending patches) is already in raring. Building stuff yourself ----------------------- Setting up an arm64 build environment is very simple. Use sbuild-createchroot or mk-sbuild and point at the bootstrap repo, with a bit of config and some updated tools packages from the repo (amd64 only supplied). Details are given on https://wiki.linaro.org/Platform/DevPlatform/CrossCompile/arm64bootstrap Once you've created a tarball chroot builds are simply done with sbuild -c quantal-amd64-sbuild -d quantal --host=arm64 <package.dsc> or sbuild -c quantal-amd64-sbuild -d quantal --host=arm64 <package>_<version> (I'd love it if sbuild got smart enough to work out the version itself when given a distro - Roger says he's working on it) To deal with the chore of 'find version, run sbuild, sign result, upload to repo, import to repo, deal with reprepro bitching if you re-upload the same version of something' for every package build, I wrote 'dimstrap' which is a simple-minded tool to wrap that up and either do one-off builds or run through a list. It is part of the xbuilder package here: https://launchpad.net/~linaro-foundations/+archive/cross-build-tools/ It also includes the logfile-parsing script ('generate html') which generates the nice status pages: http://people.linaro.org/~wookey/buildd/raring-arm64/status-bootstrap.html Image building -------------- The config and instructions provided (in http://wiki.debian.org/Arm64Port#Building_your_own_rootfs_image ) is for multistrap. Debootstrap sort-of produces working images too but takes a lot longer to unpack/configure, and misses out various vital packages (like libperl5.14). I'm sure it could be kicked into submission. In theory multistrap (apt really) should have got all the arch all packages from the main repo, but in practice it refused to do that so I had to rebuild them or copy them over anyway (grumble). Any package that installs replaced conffiles seems to generate invalid dpkg status entries (ifupdown did this to me). I've not got to the bottom of that yet. Deleting the offending line gets you an image that works. Issues ------ General: The build-profile patches for dpkg and apt need to be pushed into the distro to make that feature permanent. A thread on debian-devel is working on that (http://debian.2.n7.nabble.com/Bootstrappable-Debian-proposal-of-needed-chan…). The main issue is what syntax to use '<>' or '[]' and how to deal with multiple overlapping profiles. The patches to debian control cannot go in until at least the syntax is agreed and the tools will parse them without barfing. Johannes ands I will send an updated spec soonish. The missing piece of bootstrapping with regard to build-deps is packages that build-dep on gcc-4.6 or binutils. When cross-building this should be satisfied by <triplet>-gcc-4.6 or <triplet>-binutils. Nothing makes that happen currently. A scheme has been mooted but nothing is implemented yet. There is debate about whether cross-toolchains should build against multiarch libraries (libgcc, libstdc++) like everything else, or have their own internal copies. Doko and I disagree on this matter. That will need to be worked out at some point. We won't get that much further with fixing cross- object-introspection, which is a non-trivial job. Image-related: The images do essentially work but very little has been tested so far. Multiarch perl still needs work. nss needs cross-building in order to get apt cross-built I've not got networking working yet. Info is here: https://fedoraproject.org/wiki/Architectures/ARM/AArch64/FoundationModel_Ne… lack of a dhcp client in the image hasn't helped there. More info --------- The canonical arm64 port info page is: http://wiki.debian.org/Arm64Port Full arm64 cross-build status (i.e everything that has been tried) is here: http://people.linaro.org/~wookey/buildd/raring-arm64/status.html All the patches generated so far are here: http://people.debian.org/~wookey/bootstrap/patches/ (most that can, have been filed as bugs - there is a backlog of stuff filed in Launchpad but not yet forwarded to the Debian BTS - yes I am a bad boy - blame the fact that you can't use reportbug or bts from inside ARM due to their idiotic email policies). Future work ----------- Firstly we should say thank you to Linaro for sponsoring this work in various ways over the last 3 years. We wouldn't be at this point now if it wasn't for that. However Linaro has a lot of things to do and is trying hard not to do distro's work for them, concentrating on upstream things. This makes sense for commercially-backed distros like Red Hat and Ubuntu, but rather less for Debian where we _are_ the distro just as much as anyone else is, and ultimately someone has to spend the time to get stuff working. Anyway, I was supposed to stop work on this some time back, but have largely failed to do so (cross-building is so moreish - there is always one more build to try before bedtime!) and appreciate being given enough slack to get this to a point of actual utility. However I expect to have much less time to spend on this from now on, except insofar as it still co-oncides with things Linaro wants doing. I'd love to hear from people who actually want to use this, to get more packages built, the Debian cross-toolchains sorted, build-profiles finalised, and a whole pile of stuff fixed once Wheezy is released. I'm pretty sure there are quite a lot of people who want multiarch Debian or Ubuntu on their arm64 machines (or models). I hear rumours that actual hardware may appear sometime around the middle of the year with some bagsied for Debian. Setting up the ports infrastructure for that would be good. I don't know if anyone is interested in building slowly on models in the meantime, or if we should just carry on crossing and see how far we get. This table shows that 471 packages in raring can be expected to cross-build already: http://people.canonical.com/~cjwatson/cross/armhf/raring/ Todo: Fix up multiarch/cross perl Fix nss Build missing packages for apt Build missing packages for build-essential Build Debian cross-toolchain Get all this working in unstable as well as raring Setup buildds Build all the other packages Set up automated bootstraping runs (eventually) Current setup ------------- Builds have all been run locally using the sbuild/chroot setup described above and on the Arm64Port page, which should be easy for anyone to reproduce. The main irritation is keeping up with raring: out of sync libraries are not MA-installable. Logs are uploaded to people.linaro.org (rsync). The reprepro repo is on people.debian.org (dupload). This stuff should probably move to ports.debian.org and ports.ubuntu.com, but neither of those are set up for cross-building so I'm not quite sure how this will work. I could go on at great length about the machinery of profiled bootstrap builds, and interactions between tools, but it's not very exciting, so will resist. Suffice it to say that whilst it's all pretty slick I'd still like better buildd tools. Build-profile changes --------------------- The build-profile patches are not yet upstreamable so are collecting in the repo. The patch set so far is here: http://people.debian.org/~wookey/bootstrap/patches/profiles/packages/ Other thanks: Other people who have helped make this happen in various ways but not got a mention above: Colin Watson, Dmitry Ledkovs, Steve Langasek, Harry Leibel, Thibaut Girka, Roger Leigh, Marcus Shawcroft, James Morrisey, Jonathan Austin, Steve McIntyre, Peter Pearse, Aurelien Jarno, and whoever does sysadmin at people.{linaro,debian}.org I hope I didn't forget anyone, or any important information. Feedback from anyone attempting to get this working outside my computer is very welcome. I have almost certainly forgotten to write down some things, and upload correct versions of some other things. Wookey -- Principal hats: Linaro, Emdebian, Wookware, Balloonboard, ARM http://wookware.org/

13 years, 4 months

[Announcement] openSUSE 12.3 preview available for AArch64

by Dirk Müller

Hi cross-distro readers, the openSUSE on ARM team was quite busy the last few weeks with getting openSUSE 12.3 for AArch64 ready. At the time of this post, we have finished around 4000-4100 packages (out of ~ 6000) of the current state of the openSUSE 12.3 project for AArch64. With those successfully built packages, we’re also able to build a regular openSUSE image for you to try and run in the ARMv8 System emulator (ARMv8 Foundation Model). This is a huge achievement and milestone for us, thanks to lots of helpful hands in openSUSE. Just to put this into context: This is not a minimal system with a couple of toolchain packages. It is also not an embedded variant of a Linux environment. No, this is the full featured, standard openSUSE distribution as you’re used to, ported to AArch64, up and running. We have built it based on (slightly newer versions of) standard openSUSE 12.3 packages, and the changes are mostly already merged back into openSUSE Factory. For all we know it’s also more successful package builds than any other Linux distribution has on AArch64! If you’d like to see the status yourself, please check out the OBS repository we created for this [1]. As an open distribution, it is important to make contributions easy and we worked hard to enable others to participate in our effort. We extended OBS (the Open Build Service) to automatically spawn a Foundation Model virtual machine when you want to build for aarch64. This works remotely on the OBS server as well as locally using osc build. Building for AArch64 is therefore as easy as building for any other architecture, and it feels native to all who are familiar with the OBS. More information on this is available on the respective wiki page [2]. So, dive right into it: Get the image and start with openSUSE on AArch64 by following our wiki page: https://en.opensuse.org/Portal:ARM/AArch64. Please contact the openSUSE Team at opensuse-arm(a)opensuse.org Greetings, Dirk (openSUSE ARM Team) [1] https://build.opensuse.org/project/show?project=devel:ARM:AArch64:12.3 [2] https://en.opensuse.org/Portal:ARM/AArch64

13 years, 4 months

← Newer
1
...
5
6
7
8
9
10
11
...
15
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

cross-distro