CoreSight

coresight@lists.linaro.org

7 participants
2454 discussions

[PATCH v4 0/5] Update CoreSight infrastructure to select a default sink.

by Mike Leach

This patchset provides a proposed infrastructure to allow for the automatic selection of a sink during CoreSight tracing operations. Currently starting tracing using perf requires a sink selection on the command line:- sudo ./perf record -e cs_etm/@tmc_etr0/ --per-thread uname -a After this set (and the follow-up perf change set) the infrastructure will be able to select a default sink:- sudo ./perf record -e cs_etm// --per-thread uname -a This matches with the default operation provided with perf and intelpt. Where no sink is specified at the start of a trace session, the CoreSight system will walk the connection graph from the source ETM, to find a suitable sink using the first encountered highest priority device. The CoreSight infrastructure is updated to define sink sub_types to differentiate between sinks with built in buffers (ETB / ETF) - BUFFER type, and those that use system memory (ETR) - SYSMEM - types. SYSMEM types are considered higher priority. When two sinks are found of equal priority, then the closest sink to the source in terms of connection nodes is chosen. The automatic sink selection will also operate if an ETM is enabled using sysfs commands, and no sink is currently enabled. Applies to Linux coresight/next branch Changes since v3: 1) Removed RFC designation and distributed to wider audience. 2) Split set into CoreSight driver code (this set), and perf user runtime set. 3) Minor cosmetic changes. Mike Leach (5): coresight: Fix comment in main header file. coresight: Add default sink selection to CoreSight base coresight: tmc: Update sink types for default selection. coresight: etm: perf: Add default sink selection to etm perf coresight: sysfs: Allow select default sink on source enable. .../hwtracing/coresight/coresight-etm-perf.c | 17 +- drivers/hwtracing/coresight/coresight-priv.h | 2 + drivers/hwtracing/coresight/coresight-tmc.c | 3 +- drivers/hwtracing/coresight/coresight.c | 147 +++++++++++++++++- include/linux/coresight.h | 6 +- 5 files changed, 168 insertions(+), 7 deletions(-) -- 2.17.1

5 years, 2 months

网易邮箱帐号密码提醒

by "网易帐号中心"

5 years, 2 months

[PATCH] Fix corrupt data after perf inject from

by Al Grant

(Hi - posted for review. There was a recent ABI breaking change (see commit reference below), after which perf inject on ETM creates corrupt files. The simple fix ends up with it using the new ABI. I have an alternative patch set that emulates the old ABI - for the benefit of tools like autofdo that can't yet consume the new ABI - but it's much messier.) From: Al Grant <al.grant(a)arm.com> Commit 42bbabed09ce6208026648a71a45b4394c74585a ("perf tools: Add hw_idx in struct branch_stack") changed the format of branch stacks in perf samples. When samples use this new format, a flag must be set in the corresponding event. Synthesized branch stacks generated from CoreSight ETM trace were using the new format, but not setting the event attribute, leading to consumers seeing corrupt data. This patch fixes the issue by setting the event attribute to indicate use of the new format. Fixes: 42bbabed09ce ("perf tools: Add hw_idx in struct branch_stack") Signed-off-by: Al Grant <al.grant(a)arm.com> Acked-by: Andrea Brunato <andrea.brunato(a)arm.com> diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c index 62d2f9b9ce1b..71a056e29675 100644 --- a/tools/perf/util/cs-etm.c +++ b/tools/perf/util/cs-etm.c @@ -1332,7 +1332,13 @@ static int cs_etm__synth_events(struct cs_etm_auxtrace *etm, } if (etm->synth_opts.last_branch) + { attr.sample_type |= PERF_SAMPLE_BRANCH_STACK; + /* We don't use the hardware index, but the sample generation + code uses the new format branch_stack with this field, + so the event attributes must indicate that it's present. */ + attr.branch_sample_type |= PERF_SAMPLE_BRANCH_HW_INDEX; + } if (etm->synth_opts.instructions) { attr.config = PERF_COUNT_HW_INSTRUCTIONS; IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

5 years, 2 months

perf script for trace disassembly

by Al Grant

Hi, two years ago Leo posted a patch set including a "perf script" script for trace disassembly (arm-cs-trace-disasm.py): https://lists.linaro.org/pipermail/coresight/2018-May/001325.html I can't find this upstream - did it change name, or was there a reason it didn't make it? This kind of thing is becoming more interesting as we are looking to give people better ways of processing large volumes of trace without using "perf inject" as an intermediate step. Al IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

5 years, 2 months

COVID-19: Face Masks & Hand Sanitizer

by Hugo Sosa

Hi, I wanted to reach out to you about the urgent delivery of PPE kits. We are FDA approved importer and have FDA approved supply for PPE kits and can deliver most of the items within 10-14 days. KN95 Mask 3Ply Mask Isolated Gowns Hazmat Suits Goggles Gloves Contactless Thermometer Face Shield Swabs Hand Sanitizer ( Sea Freight only) Rapid Test Kits (FOB China only) Please check our website: www.ppekits.us For Catalogs with a lot of products and information please check: www.ppekits.us/enquiry/ Reach out to us anytime on our toll-free number 855 525 2642 We have offices in the USA, U.K., Australia and we can ship your PPE worldwide. We have delivered millions of pieces during COVID-19 Thank you, -- The Dioz Group of Companies - PPE Manufacturer & Wholesaler Office in the UK, USA, Australia. HQ: 8730 Wilshire Blvd, Penthouse Beverly Hills, CA 90211 http://url4994.ppek-its.site/ls/click?upn=tJAknwYbNLdloGJBtpwoGZ6uEtJb-2FCQ… Free Call: 855 525 2642 You may unsubscribe <http://url4994.ppek-its.site/ls/click?upn=RQt-2B-2BMMpdZvF6P5qggZe6wwgmpggF…> to stop receiving our emails.

5 years, 2 months

[PATCHv2] coresight: tmc: Add shutdown callback for TMC ETR/ETF

by Sai Prakash Ranjan

Implement a shutdown callback to ensure ETR/ETF hardware is properly shutdown in reboot/shutdown path. This is required for ETR/ETF which has SMMU address translation enabled like on SC7180 SoC and few others. If the hardware is still accessing memory after SMMU translation is disabled as part of SMMU shutdown callback in system reboot or shutdown path, then IOVAs(I/O virtual address) which it was using will go on the bus as the physical addresses which might result in unknown crashes (NoC/interconnect errors). So we make sure from this shutdown callback that the ETR/ETF is shutdown before SMMU translation is disabled and device_link in SMMU driver will take care of ordering of shutdown callbacks such that SMMU shutdown callback is not called before any of its consumer shutdown callbacks. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan(a)codeaurora.org> --- Changes since v1: * Use mode flag and drop enable flag as Mike suggested. * Use spinlock before tmc hw disable as Mike suggested. --- .../hwtracing/coresight/coresight-tmc-etf.c | 4 +-- .../hwtracing/coresight/coresight-tmc-etr.c | 2 +- drivers/hwtracing/coresight/coresight-tmc.c | 33 +++++++++++++++++++ drivers/hwtracing/coresight/coresight-tmc.h | 3 ++ 4 files changed, 39 insertions(+), 3 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c index 36cce2bfb744..cba3e7592820 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etf.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c @@ -85,7 +85,7 @@ static void __tmc_etb_disable_hw(struct tmc_drvdata *drvdata) CS_LOCK(drvdata->base); } -static void tmc_etb_disable_hw(struct tmc_drvdata *drvdata) +void tmc_etb_disable_hw(struct tmc_drvdata *drvdata) { __tmc_etb_disable_hw(drvdata); coresight_disclaim_device(drvdata->base); @@ -118,7 +118,7 @@ static int tmc_etf_enable_hw(struct tmc_drvdata *drvdata) return 0; } -static void tmc_etf_disable_hw(struct tmc_drvdata *drvdata) +void tmc_etf_disable_hw(struct tmc_drvdata *drvdata) { CS_UNLOCK(drvdata->base); diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index 625882bc8b08..b29c2db94d96 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -1110,7 +1110,7 @@ static void __tmc_etr_disable_hw(struct tmc_drvdata *drvdata) } -static void tmc_etr_disable_hw(struct tmc_drvdata *drvdata) +void tmc_etr_disable_hw(struct tmc_drvdata *drvdata) { __tmc_etr_disable_hw(drvdata); /* Disable CATU device if this ETR is connected to one */ diff --git a/drivers/hwtracing/coresight/coresight-tmc.c b/drivers/hwtracing/coresight/coresight-tmc.c index 39fba1d16e6e..c7902ce0bd3b 100644 --- a/drivers/hwtracing/coresight/coresight-tmc.c +++ b/drivers/hwtracing/coresight/coresight-tmc.c @@ -538,6 +538,38 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id) return ret; } +static void tmc_shutdown(struct amba_device *adev) +{ + unsigned long flags; + struct tmc_drvdata *drvdata = amba_get_drvdata(adev); + + spin_lock_irqsave(&drvdata->spinlock, flags); + + if (drvdata->mode == CS_MODE_DISABLED) + goto out; + + /* + * We do not care about the active trace sessions here + * since the system is going down unlike remove callback, + * just make sure that the hardware is shutdown. + */ + switch (drvdata->config_type) { + case TMC_CONFIG_TYPE_ETB: + tmc_etb_disable_hw(drvdata); + break; + case TMC_CONFIG_TYPE_ETF: + tmc_etf_disable_hw(drvdata); + break; + case TMC_CONFIG_TYPE_ETR: + tmc_etr_disable_hw(drvdata); + } + +out: + spin_unlock_irqrestore(&drvdata->spinlock, flags); + misc_deregister(&drvdata->miscdev); + coresight_unregister(drvdata->csdev); +} + static const struct amba_id tmc_ids[] = { CS_AMBA_ID(0x000bb961), /* Coresight SoC 600 TMC-ETR/ETS */ @@ -556,6 +588,7 @@ static struct amba_driver tmc_driver = { .suppress_bind_attrs = true, }, .probe = tmc_probe, + .shutdown = tmc_shutdown, .id_table = tmc_ids, }; builtin_amba_driver(tmc_driver); diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h index 71de978575f3..0a77f2f25090 100644 --- a/drivers/hwtracing/coresight/coresight-tmc.h +++ b/drivers/hwtracing/coresight/coresight-tmc.h @@ -260,6 +260,8 @@ u32 tmc_get_memwidth_mask(struct tmc_drvdata *drvdata); /* ETB/ETF functions */ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata); int tmc_read_unprepare_etb(struct tmc_drvdata *drvdata); +void tmc_etb_disable_hw(struct tmc_drvdata *drvdata); +void tmc_etf_disable_hw(struct tmc_drvdata *drvdata); extern const struct coresight_ops tmc_etb_cs_ops; extern const struct coresight_ops tmc_etf_cs_ops; @@ -268,6 +270,7 @@ ssize_t tmc_etb_get_sysfs_trace(struct tmc_drvdata *drvdata, /* ETR functions */ int tmc_read_prepare_etr(struct tmc_drvdata *drvdata); int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata); +void tmc_etr_disable_hw(struct tmc_drvdata *drvdata); extern const struct coresight_ops tmc_etr_cs_ops; ssize_t tmc_etr_get_sysfs_trace(struct tmc_drvdata *drvdata, loff_t pos, size_t len, char **bufpp); base-commit: 059e38815950dbec65beafe03757bce9436e89a4 -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

5 years, 2 months

Re: Random Softlockups when SMMU translation is enabled for TMC ETR

by Sai Prakash Ranjan

Hi guys, On 2020-05-28 14:16, Sai Prakash Ranjan wrote: > Hi folks, > > I was trying to enable SMMU translation for coresight TMC ETR > component via "iommus" property on SC7180 SoC. > And on enabling the trace, I observe random softlockups everytime. For > enabling trace, I just select ETR as > the sink and ETM as the source via sysfs and immediately start seeing > lockups. I have looked from the hardware > point of view and there is no errata as such and it works fine on > downstream kernel which is very old - 4.14 kernel. > This is reproducible even with KASAN disabled as well. Also I have > dumped other CPU stacks as well during softlockup > via adding dump_stack in ipi_cpu_stop and and no interesting logs > there as other cpus are idle. > As an update, this turned out to be due to firmware misconfiguration. Thanks, Sai -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

5 years, 2 months

[PATCHv3 0/2] coresight: etm4x: Add support to skip trace unit power up

by Sai Prakash Ranjan

This series adds support to skip powering up of trace unit on systems with an errata which stops CPU watchdog counter when power up bit is set (TRCPDCR.PU = 1). Setting this bit is not required on Qualcomm Technologies Inc. chipsets where this errata exists since the ETMs are in the same power domain as their respective CPU cores. Changes since v2: * Fix checkpatch warning for 80 characters. Changes since v1: * Use qcom,skip-power-up for naming as suggested by Mathieu. * Have check for DT property in initialization as per Mathieu. * Reword description for property as per Mathieu. * Split up dt-binding patch as checkpatch complains. Tingwei Zhang (2): coresight: etm4x: Add support to skip trace unit power up dt-bindings: arm: coresight: Add support to skip trace unit power up .../devicetree/bindings/arm/coresight.txt | 7 +++++ drivers/hwtracing/coresight/coresight-etm4x.c | 27 ++++++++++++------- drivers/hwtracing/coresight/coresight-etm4x.h | 3 +++ 3 files changed, 27 insertions(+), 10 deletions(-) -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

5 years, 3 months

Random Softlockups when SMMU translation is enabled for TMC ETR

by Sai Prakash Ranjan

Hi folks, I was trying to enable SMMU translation for coresight TMC ETR component via "iommus" property on SC7180 SoC. And on enabling the trace, I observe random softlockups everytime. For enabling trace, I just select ETR as the sink and ETM as the source via sysfs and immediately start seeing lockups. I have looked from the hardware point of view and there is no errata as such and it works fine on downstream kernel which is very old - 4.14 kernel. This is reproducible even with KASAN disabled as well. Also I have dumped other CPU stacks as well during softlockup via adding dump_stack in ipi_cpu_stop and and no interesting logs there as other cpus are idle. Logs for softlockup, [ 69.725539] watchdog: BUG: soft lockup - CPU#0 stuck for 11s! [ksoftirqd/0:9] [ 69.772709] irq event stamp: 144 [ 69.776047] hardirqs last enabled at (143): [<ffffffd05a0fb908>] run_ksoftirqd+0x34/0x70 [ 69.784452] hardirqs last disabled at (144): [<ffffffd05ab7bbd8>] __schedule+0x158/0x940 [ 69.792768] softirqs last enabled at (142): [<ffffffd05a0819dc>] __do_softirq+0x4bc/0x51c [ 69.801255] softirqs last disabled at (69): [<ffffffd05a0fb904>] run_ksoftirqd+0x30/0x70 [ 69.824147] pstate: 60400009 (nZCv daif +PAN -UAO) [ 69.829082] pc : skb_release_data+0x60/0x1a4 [ 69.833475] lr : skb_release_data+0x50/0x1a4 [ 69.837864] sp : ffffff8147cab770 [ 69.841279] x29: ffffff8147cab770 x28: ffffff8133277d00 [ 69.846744] x27: 0000000000000034 x26: ffffff814441a30e [ 69.852204] x25: ffffff811f0c0000 x24: 0000000000000000 [ 69.857666] x23: ffffff81292cc000 x22: ffffff814441a380 [ 69.863133] x21: 0000000000000001 x20: ffffff814441a3a0 [ 69.868595] x19: ffffff81055a7540 x18: ffffff8114f80280 [ 69.874062] x17: 00000000000005a4 x16: ffffff8114f80278 [ 69.879526] x15: 0000000000000000 x14: 0000000000000001 [ 69.884994] x13: 00000000caf7cc01 x12: 00000000b6bc5499 [ 69.890453] x11: 0000000000000000 x10: dfffffd000000001 [ 69.895920] x9 : 0000000000000001 x8 : 0000000000000000 [ 69.901377] x7 : 0000000000000000 x6 : 0000000000000000 [ 69.906839] x5 : 0000000000000000 x4 : 0000000000000000 [ 69.912307] x3 : ffffffd05a99ea98 x2 : 0000000000000001 [ 69.917771] x1 : 0000000000000004 x0 : 0000000000000001 [ 69.923231] Call trace: [ 69.925765] skb_release_data+0x60/0x1a4 [ 69.929801] skb_release_all+0x2c/0x38 [ 69.933669] consume_skb+0x48/0x6c [ 69.937177] packet_rcv+0x5c/0x3f0 [ 69.940685] __netif_receive_skb_one_core+0x50/0x60 [ 69.945704] __netif_receive_skb+0x4c/0x8c [ 69.949926] netif_receive_skb_internal+0xb8/0x198 [ 69.954856] napi_gro_receive+0x19c/0x360 [ 69.959030] r8152_poll+0x518/0x7b4 [r8152] [ 69.963336] net_rx_action+0x114/0x32c [ 69.967198] __do_softirq+0x258/0x51c [ 69.970968] irq_exit+0xd8/0xf8 [ 69.974215] __handle_domain_irq+0x8c/0xc4 [ 69.978430] gic_handle_irq+0x100/0x1c4 [ 69.982378] el1_irq+0xbc/0x180 [ 69.985619] smpboot_thread_fn+0x84/0x2bc [ 69.989753] kthread+0x128/0x138 [ 69.993081] ret_from_fork+0x10/0x18 [ 69.996769] Kernel panic - not syncing: softlockup: hung tasks [ 70.017342] Call trace: [ 70.019867] dump_backtrace+0x0/0x188 [ 70.023640] show_stack+0x20/0x2c [ 70.027061] dump_stack+0xdc/0x144 [ 70.030573] panic+0x174/0x37c [ 70.033724] softlockup_fn+0x0/0x60 [ 70.037324] __hrtimer_run_queues+0x264/0x498 [ 70.041808] hrtimer_interrupt+0xf0/0x22c [ 70.045946] arch_timer_handler_phys+0x40/0x50 [ 70.050524] handle_percpu_devid_irq+0x8c/0x158 [ 70.055190] __handle_domain_irq+0x84/0xc4 [ 70.059412] gic_handle_irq+0x100/0x1c4 [ 70.063359] el1_irq+0xbc/0x180 [ 70.066595] skb_release_data+0x60/0x1a4 [ 70.070638] skb_release_all+0x2c/0x38 [ 70.074498] consume_skb+0x48/0x6c [ 70.078007] packet_rcv+0x5c/0x3f0 [ 70.081518] __netif_receive_skb_one_core+0x50/0x60 [ 70.086533] __netif_receive_skb+0x4c/0x8c [ 70.090746] netif_receive_skb_internal+0xb8/0x198 [ 70.095673] napi_gro_receive+0x19c/0x360 [ 70.099825] r8152_poll+0x518/0x7b4 [r8152] [ 70.104129] net_rx_action+0x114/0x32c [ 70.107984] __do_softirq+0x258/0x51c [ 70.111760] irq_exit+0xd8/0xf8 [ 70.115003] __handle_domain_irq+0x8c/0xc4 [ 70.119215] gic_handle_irq+0x100/0x1c4 [ 70.123168] el1_irq+0xbc/0x180 [ 70.126410] smpboot_thread_fn+0x84/0x2bc [ 70.130540] kthread+0x128/0x138 [ 70.133862] ret_from_fork+0x10/0x18 [ 70.137570] SMP: stopping secondary CPUs [ 70.355132] Kernel Offset: 0x4a000000 from 0xffffffd010000000 [ 70.361047] PHYS_OFFSET: 0xfffffffac0000000 [ 70.365357] CPU features: 0x0006,2a80aa18 [ 70.369489] Memory Limit: none One more such softlockup, [ 122.634764] watchdog: BUG: soft lockup - CPU#0 stuck for 11s! [sugov:0:1729] [ 122.683618] irq event stamp: 0 [ 122.686813] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 122.693310] hardirqs last disabled at (0): [<ffffffd254aec380>] copy_process+0x3e4/0xca8 [ 122.701655] softirqs last enabled at (0): [<ffffffd254aec398>] copy_process+0x3fc/0xca8 [ 122.710003] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 122.731030] pstate: 20400009 (nzCv daif +PAN -UAO) [ 122.736001] pc : preempt_schedule_irq+0x48/0x84 [ 122.740697] lr : preempt_schedule_irq+0x44/0x84 [ 122.745389] sp : ffffffc015c13a80 [ 122.748828] x29: ffffffc015c13a80 x28: ffffff815285af80 [ 122.754330] x27: ffffff815285af80 x26: ffffffc010004000 [ 122.759833] x25: ffffffc010000000 x24: 0000000000000000 [ 122.765332] x23: 0000000080c00009 x22: ffffffd2555492e8 [ 122.770826] x21: 0000000000000060 x20: 00000000000000e0 [ 122.776321] x19: ffffff815285af80 x18: 0000000000000005 [ 122.781825] x17: 0000000000000000 x16: 0000000000000001 [ 122.787319] x15: 0000000000000010 x14: 0000000000000010 [ 122.792822] x13: 0000000000000000 x12: ffffffd254a9bb14 [ 122.798320] x11: 632d4b6b9e7ff300 x10: 632d4b6b9e7ff300 [ 122.803820] x9 : ffffffd25554750c x8 : 0000000000000000 [ 122.809318] x7 : ffffffd254ba17b4 x6 : 0000000000000000 [ 122.814815] x5 : 0000000000010000 x4 : 0000000000000080 [ 122.820312] x3 : ffffffc015c13a00 x2 : ffffffd254a93c04 [ 122.825809] x1 : ffffffc015c13a00 x0 : ffffffd255548028 [ 122.831309] Call trace: [ 122.833876] preempt_schedule_irq+0x48/0x84 [ 122.838217] arm64_preempt_schedule_irq+0x4c/0x70 [ 122.843092] el1_irq+0xd4/0x180 [ 122.846364] __mutex_unlock_slowpath+0x260/0x290 [ 122.851150] mutex_unlock+0x24/0x30 [ 122.854780] dev_pm_opp_xlate_required_opp+0xd8/0x114 [ 122.860010] qcom_cpufreq_hw_target_index+0xf4/0x1a4 [ 122.865160] __cpufreq_driver_target+0x1e8/0x2f4 [ 122.869947] sugov_work+0x58/0x70 [ 122.873397] kthread_worker_fn+0x10c/0x1f8 [ 122.877652] kthread+0x11c/0x12c [ 122.881014] ret_from_fork+0x10/0x18 [ 122.884733] Kernel panic - not syncing: softlockup: hung tasks [ 122.905309] Call trace: [ 122.907872] dump_backtrace+0x0/0x188 [ 122.911678] show_stack+0x20/0x2c [ 122.915130] dump_stack+0xc8/0x124 [ 122.918667] panic+0x168/0x388 [ 122.921857] softlockup_fn+0x0/0x60 [ 122.925485] __hrtimer_run_queues+0x250/0x47c [ 122.930003] hrtimer_interrupt+0xf0/0x22c [ 122.934171] arch_timer_handler_phys+0x40/0x50 [ 122.938782] handle_percpu_devid_irq+0x8c/0x158 [ 122.943485] __handle_domain_irq+0x84/0xc4 [ 122.947737] gic_handle_irq+0xd0/0x178 [ 122.951625] el1_irq+0xbc/0x180 [ 122.954903] preempt_schedule_irq+0x48/0x84 [ 122.959239] arm64_preempt_schedule_irq+0x4c/0x70 [ 122.964110] el1_irq+0xd4/0x180 [ 122.967387] __mutex_unlock_slowpath+0x260/0x290 [ 122.972169] mutex_unlock+0x24/0x30 [ 122.975791] dev_pm_opp_xlate_required_opp+0xd8/0x114 [ 122.981015] qcom_cpufreq_hw_target_index+0xf4/0x1a4 [ 122.986150] __cpufreq_driver_target+0x1e8/0x2f4 [ 122.990933] sugov_work+0x58/0x70 [ 122.994378] kthread_worker_fn+0x10c/0x1f8 [ 122.998629] kthread+0x11c/0x12c [ 123.001982] ret_from_fork+0x10/0x18 [ 123.005741] SMP: stopping secondary CPUs [ 123.223202] Kernel Offset: 0x1244a00000 from 0xffffffc010000000 [ 123.229319] PHYS_OFFSET: 0xffffffdb80000000 [ 123.233655] CPU features: 0x0006,2a80aa18 [ 123.237809] Memory Limit: none Thanks, Sai -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

5 years, 3 months

Your Email Password will expire today 5/28/2020 12:08:10 a.m.

by MAIL SERVER

5 years, 3 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight